Supply, Erection and commissioning of Double Girder type EOT Crane as per site requirement at Pump Houses ND-1 and ND-2 of M/Garh W/S Mech Division, Narnau

Supply, Erection and Commissioning of Double Girder type E.O.T. Crane tested to 25% overload as per IS: 3177 & IS: 807 Complete with bi-rail type Electric Wire Rope Hoist confirming to IS: 3938, having technical parameters as under. Capacity: 10.0 metric Ton (10,000 Kgs.) Span of crane: As per site requirement. Bridge Construction: Double-Girder type construction consisting of R.S. Joist of adequate strength, complete with M.s. Square bar 50mm welded to top flange of the beam (Girder) Height of lift: 7.0 meters / 8.0 mtr (Approximate) standard lift as per site requirement Duty: Class- II (Indoor/Outdoor type) duty. Electric Motors: Crane Duty, TEFC squirrel cage induction motor as per IS: 325, S-4 rating suitable for 150 starts per hours with Class- F insulation and IP: 55 protection, operating on A.C. 3- Phase, 50Mz main power supply at 415 (Volts+/- 10%) of Bharat Bijlee/SIEMEMS/ABB/CGL. i)Hosting Motors: 20.00 HP/4-Pole ii)Cross Travel Motor: 7.5 HP/4-Pole iii)Long travel Motor: 5 HP/4-Pole X 2 (Double Drive) Operating Speeds: i)Hosting Motors: 6 Meters: per minute ii)Cross Travel Motor: 12.0 Meters: per minute iii)Long travel Motor: 12.0 Meters: per minute Brakes: All motors of the crane shall be coupled to failsafe, A.C. electromagnetic Drum/Disc-type Brakes designed to be declutched as soon as power supply is cut/switched off. Gears:All gears shall be of helical-type precision machine hobbled from tested quality alloy steel dully housed in a totally enclosed dust & vermin proof oil-bath lubricated gear boxes. Wire Rope:Tested quality, un galvanized steel wire rope of 6x36 or 6x37 construction with fiber/hemp core as per IS 2266 of Usha MARTIN make (size 18 mm/4-falls) shall be used. Controls:From ground level through a plastic bided pendant controller suspended from the hoist having control Voltage of 110- Volts. For safety of the operator complete with (Mains) On/Off push-buttons. Other Safety features:Contractors & overload Relay shall be of Siemens/BCH make, Electrical terminals of tecnoplast/Phenix/Elemax to prevent over hoisting/lowering of the hook block beyond operating limit two way shunt lever type limit switch shall be provided for long travel movement . Finally, a C-series MCB of MG/Hager make shall be provided for mains incoming supply beside individual fuse protection for all motors. Trailing Cables:Trailing cable/Festooning system, consisting of PVC insulated copper cables complete with cable Carrier trolleys running on the section of ISLT: 50 designations. Gantry:Supply of 10 Ton Gantry Crane with end carriages and allied assessories. Supply, Erection and Commissioning of square bar / gantry rail for complete long travel throughout the each pump house for movement of EOT in Horizontal Transmission (HT) as per site requirement. Above item rates are including All Taxes, Transporation/carriage charges, Supply, Erection and Commissioning charges, loading-unloading charges, Civil work (if any) Hydra/welding machine and any other left over machinery/item as per site requirement. (1 No. at Pump house ND-1) Make : Wester, Electromech, INDEF, FELCO, KONE, STAR & any other approved make of Irrigation Department