CIVIL WORKS FOR UPGRADATION OF INDIGENIZATION DEPARTMENT

Removing the partly glazed partly panelled Aluminium & NLC partitions including doors, gypsum partition (including frame work),prefabricated partitions of godrej make carefully from position including stacking & shifting the serviceable materials from the site & stacking at the earmarked area/civil stores/Salvage store all complete as per specification and direction of Engineer-in-Charge. With rates including hire charges for labour,tools,etc all as specified and directed by EIC.

Demolishing the existing cement plastered brick masonry made in Cement mortar of any thickness including stacking serviceable materials and disposable of unserviceable materials within 50 metres lead with rate including hire charges for labour,tools,etc all as specified and directed by EIC.

Removing the existing ceramic/ vitrified floor tiles/dado/skirting,tiles to be cut for the width of block work(At new block work locations) of any thickness and removal,shifting of debris to earmarked area/civil stores/Salvage store including cost of all tools, labour , transportation etc, all as directed by EIC. Note:At new brick work construction location,Tiles to be cut for the required blockwork width without breaking the existing tile.

Dismantling existing gypsum false ceiling of any size & description from position including stacking of serviceable items and disposable of unserviceable materials within the earmarked area/civil stores/Salvage store all complete as per specification and direction of Engineer-in-Charge. with rate including hire charges for labour,tools,etc all as specified and directed by EIC. Note: At new brick work construction location the tiles should be cut for required width without breaking the laid existing tiles

Providing and erecting fully glazed/ partly glazed and partly panelled powder coated (of approved colour) Aluminium full height partitions/fully fixed windows, low height partition using standard sections of JINDAL or HINDALCO so that each pannel shall not exceed 1.20 SQM with 12mm thick pre-laminated board having twin finish of Novopan / TESA in top rows and 5mm thick float glass of MODI / ST GOBAIN bottom rows including glazing clips, rubber gasket for fixing the glass, filling gaps with silicon sealant etc. Specification for aluminum sections to be used is a) Bottom members - a) 95.25 x 44.45 x 2.00mm b) Top / vertical members - 63.50 x 38.10 x1.95mm c)Middle memebers - 63.50 x 38.10 x 1.95mm. Alternate vertical aluminium mullion members should be extended till rcc slab/beam soffit for stability of erected aluminium partition,The alumunium partitions arrangement(full & low height) with glass and particle board arrangement shall match with existing partitions pattern & in similar to that.

Providing, manufacturing and erecting Partly glazed and partly panneled Double / single leaf Aluminium door using standard anodized powder coated sections of JINDAL, HINDALCO make as detailed below all of approved make.(Including necessary screws,fasteners,cleats,rods etc.Specification for each shutter :-a) Bottom members -97.30 x 44.45x 2.15mm b) Top members - 47.62x44.45x1.95mm c) Side member - 47.62 x 44.45 x 1.82mm d) Middle member - 49.91 x 44.45 x 1.60mm; Door member of SL NO19566 of JINDAL e) 12mm thick pre laminated twin finish exterior grade of Novapan MFPB (PTX) - Superior grade or TESA / ASIS / ARCHIDPLY or any other particle board having ISI Mark or 12mm thick both side finished MDF boards f) Glass - 5.00mm thick plain float glass of MODI / SAINTGOBAIN make g) Rubber gaskets - Good quality of approved make h) Glazing clips - Weight of 0.097Kg/RM. I) Aluminium hinges 125mm long - 3Nos j) Aluminium handle 150mm long - 2 Nos. k) Concealed lock of make godrej/sheel 4 lever l) Aluminium tower bolts 200mm long - 2 Nos. m)Miscellaneous -Al. cleats, screws ,Door sealant,PVC push/pull stickers on glass. etc

Supplying and fixing in position(at any ht.& level) three track glazed Aluminium powder coated sliding windows with sections conforming to JINDAL catalogue including providing & fixing 5 mm thick plain float glass of MODI/ SAINT GOBAIN make approved quality rubber/nylon gaskets, providing and fixing standard Aluminium 75mm handles locking arrangement, necessary wheel/rollers etc.,the windows shall be fabricated with Aluminium extrusions as described below of series B: a) Bottom member three track section 92 X 31.75 X 1.50mm b) Top & sides of 92 X 31.75 X 1.50mm. c)Shutter top & bottom 40X18X1.29mm d) Shutter interlock 40X27X1.29mm e) Shutter handle side 40X18X1.29mm complete along with as specified and as directed by EIC.[Gaps between wall/beam and Al. member shall be filled with silicon and made good.]

Providing, manufacturing and erecting Partly glazed and partly panneled single / Double leaf Aluminium sliding door using standard anodized powder coated sections of JINDAL, HINDALCO make as detailed below all of approved make.(Including necessary screws,fasteners,cleats,rods etc.Specification for each shutter :-a) Bottom members - a) 95.25 x 44.45 x 2.00mm b) Top members - 47.62x44.45x1.95mm c) Side member - 47.62 x 44.45 x 1.82mm d) Middle member - 49.91 x 44.45 x 1.88mm; Door member of SL NO19566 of JINDAL e) 12mm thick pre laminated twin finish exterior grade of Novapan MFPB (PTX) - Superior grade or TESA / ASIS / ARCHIDPLY or any other particle board having ISI Mark or 12mm thick both side finished MDF boards f) Glass - 5.00mm thick plain float glass of MODI / SAINTGOBAIN make g) Rubber gaskets - Good quality of approved make h) Glazing clips -Weight of 0.097Kg/RM. I) Aluminium powder coated Guide channel 4.0m long - 3Nos j) Aluminium handle 150mm long - 2 Nos. k) Concealed lock of make godrej/sheel 6 lever l) Aluminium tower bolts 200mm long - 2 Nos. m)Miscellaneous -Al. cleats, screws ,Door sealant, etc

Supply and installation of frameless 12 mm thick double leaf toughened glass door with openable shutters with machine polished edges,holes for patch fittings,complete SS 304 grade patch fittings like Top ,bottom patch,L patch,Center lock with 2 keys,600 mm long D- handle(2 sets),Heavy duty floor spring(For each glass leaf) etc., complete hardware of dorma/ozone make,Glass make: Saint-gobain/MODI along with structural silicon sealing,with rate including cost of all materials,floor cutting for spring fixing,labour,tools,wastage ,taxes,etc all as approved and directed by EIC.

Supply and installation of exterior/interior grade interlocking WPC (Wood plastic composite) fluted wall panels (18-20 mm) thickness of approved shade and texture mounted on aluminium/GI framework spaced max @ 300 mm c/c ,or as per the panels size requirement with all necessary starter clips for panel fixing,ss fasteners,adhesive,perimeter edge and corner trims,profiles etc., With rate including cost of all materials,labour,tools,wastage ,taxes fixing,etc all as approved and directed by EIC. Work shall be completed in true horizontal /vertical pane and as per manufacturer’s specifications.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Supplying and sticking UV protected sun control / frosted film having 25 micron thickness over glass panes of windows,partitions and doors including material,labour,wastage etc as directed by EIC.

Providing and constructing brick work with best locally available flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in CM 1:6 (1 cement : 6 coarse river sand) for walls for all thickness in standard bonds including raking out joints 10mm deep to receive plaster, including cost of all materials,labour,taxes, curing etc., complete as specified and directed by EIC.

Plastering internal / external brickwalls / concrete surfaces with C.M 1:6 (1 cement : 6 coarse river sand) , 20 mm thick trowelled to even and smooth finish including cost of all materials, labour, curing, scaffolding,etc. at heights with rate including cost of all materials,labour,curing,transportation,other incidental charges,etc all as specified and directed by EIC.

Providing and laying in position light weight cinder concrete filling in toilets inluding ramming,levelling to required slope of specified grade excluding the cost of centering and shuttering 1:2:4 (1 cement : 2 coarse river sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) all as specified and directed by EIC.

Providing and laying anti skid matt finish vitified floor tiles (KAJARIA / NITCO / JOHNSON / SOMANY make) of size 600x600 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey,Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse river sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete all as specified and directed by EIC.

Providing and fixing Ist quality ceramic glazed / digitally printed wall tiles (KAJARIA / NITCO / JOHNSON / SOMANY make) conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size (preferably 0.3m x 0.45m) as approved by EIC, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse river sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete.

Providing & fixing Mineral Fibre suspended Ceilling System with 595mm x 595mm size and 15 to 16mm thick MINATUFF (MICRO LOOK) EDGE TILES having NRC value of 0.7 with ARMSTRONG SILHOUETTE exposed grid or equivalent product from St.Gobain make.INSTALLATION: To Comprise main runner spaced at 1200mm centers securely fixed to the structural soffit using Armstrong /St.Gobain suspension system (specifications below) at 1200 mm maximum centre & not more than 150mm from spliced joints. The Fisrt / Last suspension system at the end of each main runner should not be greater than 600mm from the adjacent wall.1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm modules to be formed by fitting 600mm long cross tees centrally between the 1200 mm cross tees. he 1200mm Cross tees to have central "birdsmouth" notches facilitate fitting of 600mm cross tees with rate including cost of all all materials,labour,tools,wastage ,taxes,etc all as approved and directed by EIC.

Modification of existing false ceiling grid at linear light locations of 600x1200 mm & varying to convert to a new grid modules of 600*600 for laying light fitting and gypsum board.Scope includes material supply(Grid,suspension & gypsum board), existing removal , fixing and stabilizing the existing grid by providing additional main runners,cross Tees and other required ceiling members., matching in size,profile and finish of the existing grid along with gypsum board matching with finish of the existing tiles.Grid to be secured to structural soffit using fasteners and suspended with GI suspension rods.Alignment and level of entire false ceiling shall be maintained and damaged ceiling correction is also included.Make: Armstrong/Saint-Gobain or equivalent approved.Rate inclusive of all materials,labour,tools,wastage,taxes,transportation,scaffolding and all incidental as approved and directed by EIC.

Providing and applying on prepared surface (including preparatory work on old surfaces) two coats of interior Plastic emulsion paint of Asian paints or equivalent make of approved shade over a coat of primer Asian paint or approved make with rate including cost of all materials, tools,labour ,scaffolding,wastage, etc., complete at all as approved, specified , all made good and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.The rates include for: (a) Use of all scaffoldings and cradles including hoisting and lowering.(b)Taking down, cleaning as directed and refixing blinds and fittings, picture rods, cornice poles and small items of builder’s hardware such as door knobs, finger plates, escutcheons, hooks etc. which are not required to be painted. (c) Use of dust sheets and other coverings for the protection of fixtures, fittings, furniture, etc. (d) Shifting of movable cupboards and furniture as required and replacing in position. (e) Work in patches (over one square metre each) including matching with existing work and marrying in at the edges. (f) Removing all splashes, drops, dirt, etc. and leaving premises in a clean state.

Providing and applying on prepared surface of ceiling gypsum boards (including preparatory work on old surfaces) one coats of interior Plastic emulsion paint of Asian paints or equivalent make of approved shade with rate including cost of all materials, tools,labour ,scaffolding,wastage, etc., complete at all as approved, specified , all made good and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.The rates include for: (a) Use of all scaffoldings and cradles including hoisting and lowering.(b)Taking down, cleaning as directed and refixing blinds and fittings, picture rods, cornice poles and small items of builder’s hardware such as door knobs, finger plates, escutcheons, hooks etc. which are not required to be painted. (c) Use of dust sheets and other coverings for the protection of fixtures, fittings, furniture, etc. (d) Shifting of movable cupboards and furniture as required and replacing in position. (e) Work in patches (over one square metre each) including matching with existing work and marrying in at the edges. (f) Removing all splashes, drops, dirt, etc. and leaving premises in a clean state.

Supplying and applying approved quality approx 1mm thick wall care putty to walls(internal/external) surfaces from Asian paints/Wallplast/BIRLA make and carrying out punning to obtain smooth & even finish using EMERY paper 180 including cost of material, labour, wastage etc.,complete all as approved,all made good, specified and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.

Providing and fixing 18-20 mm thick Granite stone of colour black / cherry red/ Ruby red, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse river sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels all as specified and directed by EIC.

Supplying & fixing approved quality 0.76mm thick perforated screen roller blinds (preferably Matt finish) of VISTA / MARVEL make of specified size made out of 75% PVC & 25% polyster material (which allows 8% light) having fire resistance of NFPA 701 type A along with PVC powder coated MS bottom and top rails operated with PVC ball chain with rate includes cost of all materials, labour charges for fixing, screws, transportation,taxes,overheads,etc all as specified & directed by EIC.

Providing half round nosing of edges of granite slab of 20 mm thick including polishing etc, complete as specified and directed by Engineer In Charge.

Supplying and fixing of white glazed porcelain counter type hand wash basin of 600 x 480mm size or equivalent approved size of (HINDWARE / PARRYWARE) make confirming to IS) with 32mm dia C.P brass waste coupling (Model no : C230C) of standard pattern, suitable size CP Bottle trap (Model No : C231L) from Essess make or equivalent product from Hindware (Model : EVITA) / Parryware / CERA make with MS brackets including painting of brackets with rate including the cost and conveyance of materials, labour charges, incidental charges, taxes, etc., as approved and directed by the EIC

Supply & fixing electric chord provisioned battery cum electric based infrared sensor operated CP Pillar cocks of Essess make (Model No : RESF101) or equivalent product from Hindware (Model No :240011) / CERA / Parryware make including cost of all materials,labour charges for fixing,etc all as specified and directed by EIC.

Supplying and fixing 15mm dia CP brass body angle cocks with flange of Essess make (Model No : P112) or equivalent product from Hindware (Model No : F850077) / Parryware / CERA make as approved including the cost and conveyance of materials, labour charges, incidental charges, etc., as approved and directed by the EIC

Supply & fixing floor mounted, white vitreous china single piece, 5D syphonic action Western water closet including integrated white vitreous china cistern of 3 / 6 litre capacity with dual flushing system with seat cover from Essess make or equivalent product from Hindware / CERA / Parryware make including all fittings & fixtures, nuts & bolts / gaskets, etc and making conncetion with suitable P / S trap with rate including cost and conveyance of materials, labour charges for fixing, incidental charges, taxes, etc., as approved and directed by the EIC

Supply & fixing 2 in 1 type brass body CP coated Bib cock of Essess make (Model No : P103A) or equivalent model from Hindware (Model No : F570005) / Parryware / CERA make with rate including cost and conveyance of materials, labour charges for fixing, incidental charges, taxes, etc., as approved and directed by the EIC

Supply & fixing CP coated health Faucet with 1.20m SS flexible tube and Wall Hook of Essess make (Model No : C232N) or equivalent model from Hindware (Model F160023) / Parryware / CERA make with rate including cost and conveyance of materials, labour charges for fixing, incidental charges, taxes, etc., as approved and directed by the EIC

Supplying and fixing 610mm long CP towel rod of Essess make (Model No : AC701 ) or equivalent product in Hindware / Parryware / CERA make with rate including cost and conveyance of materials, labour charges for fixing, incidental charges, taxes, etc., as approved and directed by the EIC

Supplying and fixing 600x450mm beveled edge mirror of superior glass of approved quality and ST.GOBAIN make with SS Studds & rubber washers complete with rate including cost and conveyance of materials, labour charges for fixing, incidental charges, taxes, etc., as approved and directed by the EIC

Providing and fixing factory made 30 mm thick plain panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mmx 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture.M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel.10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete with rate including cost of all materials, tools, labour, etc., all as specified and directed by EIC.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size,complete as per manufacturer’s specification and direction of Engineerin-Charge.

Supplying and Fixing 15mm dia nominal dia CPVC pipes of ASTRAL / Aashirvad / Prince / Sudhaker make having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including jointing of pipes & fittings with one step CPVC solvent cement, trenching,refilling & testing of joints,chasing in the brick walls,plastering with CM 1:6complete all as approved, specified and directed by EIC.

Supplying and Fixing 20mm dia nominal dia CPVC pipes of ASTRAL / Aashirvad / Prince / Sudhaker make having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including jointing of pipes & fittings with one step CPVC solvent cement, trenching,refilling & testing of joints,chasing in the brick walls,plastering with CM 1:6complete all as approved, specified and directed by EIC.

Providing and fixing 110mm dia PVC SWR drainage pipes fixed to wall, in floors of SUDHAKAR / PRINCE make confirming to IS 4985 of class 2, 4 Kg/sqcm pressure with ISI mark including cost of necessary specials like bends,shoes, PVC Clamps, nuts/screws,PVC solvent for fixing ,perforations @ 20mm dia @4 for a length of 1.5mts etc.,top closed with steel wire mesh including cutting the parapet,RCC slab etc., fixing and making good with Cement mortar., with all necessary fittings and fixings including cost of tools, labour, transportation etc,all as directed and specified by EIC.

Providing and fixing 75 mm dia PVC SWR drainage pipes fixed to wall, in floors of SUDHAKAR / PRINCE make confirming to IS 4985 of class 2, 4 Kg/sqcm pressure with ISI mark including cost of necessary specials like bends,shoes, PVC Clamps, nuts/screws,PVC solvent for fixing ,perforations @ 20mm dia @4 for a length of 1.5mts etc.,top closed with steel wire mesh including cutting the parapet,RCC slab etc., fixing and making good with Cement mortar., with all necessary fittings and fixings including cost of tools, labour, transportation etc,all as directed and specified by EIC.

Providing and fixing on wall face 100mm dia unplasticised - PVC moulded fittings/ accessories like , Vent Cowls, Bends,Elbow,Floor / Nahani Traps with gratings, Offsets,cleanouts etc., of ASTRAL / ASHIRVAD/ PRINCE / SUPREME make for unplasticised Rigid PVC pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion with rate including cost of material, labour charges, tools, lifts, leads, transportation etc., all as approved, specified and directed by EIC.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound of FOSROC / Dr.FIXIT make consisting of applying (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry with rate include cost of all materials, labour, curing, wastages,scaffolding at all heights all directed and approved by EIC.

Providing and laying single layer homogenous ESD flooring with marbled surface pattern as per EN ISO 10581 of ARMSTRONG make or equivalent product from TARKETT having gaps filled with thermal welding including surface prepartion & filling minor holes/gaps,providing copper ribbons of 25mm width and 25micron thcikness forming a grid of 1.0m x 1.0m. The sheet should have thickness of 2mm, width of 2.0mts & length between 16 to 20mts with rate including cost of all materials,wastage, labour,tools, conductive adhesive etc all as specified and directed by EIC.(The sheet should have residual indentation of 0.05mm as per EN ISO 24343, the color fastness > 6 as per ISO 105-B02, vertical resistence R1< 1 x 106 Ohm as per EN1081 and the static electric charge < 2kV as per EN1815.The product should also confirm to class Bfl - s1 in flammability test as per EN 13501 - 1, slip resistence of R9 as per DIN 51130.

Providing and fixing 30mm X 30mm size PVC coving forat junctions of wall and flooring with necessary corner pieces including sealing the joints with necessary sealants etc complete all as specified,directed and approved by EIC.

Providing and fixing PCGI single leaf swing / emergency exit Door of approximate size 1.20x2.10 mts and 46mm thick made out of 0.80 MM thick PCGI sheets filled with PUF and necessary reinforcement and MS powder coated door frame of NICOMAC/ICLEAN/CELESTRA make or equivalent with double skin view glass of size 500x 750 mm for shutter using 6mm toughened clear float glass including necessary beading ,sealing all joints with silicon sealant etc with necessary SS hinges with ball bearings/pivots, handles ,Push bar,arrangement for fixing in walls /panels and providing concealed hydraulic door closer of DORMA make with rate including cost of all materials, labour charges, hire charges for tools,wastage ,taxes,etc all as approved and directed by EIC.

Supply & fixing of name board at building entrance with PVC eco solvent sticker over ACP board of 5 mm thickness including DTP works with clear lamination and studd fixing including materials,labour,transportation,overheads etc. as per the matter provided and all as per directions of EIC

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.80 m in height dimension comprising of lead free uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. ). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Three track three panels sliding window with two glazed & one wire mesh panels using R 3 series with frame(98 mm) X(40 mm & above) both glazed and fly screen sash (30mm & above) x (55mm & above ) both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm.)with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m)

Supplying & fixing 5mm thick float glass panes of St.Gobain / ASAHI or equivalent make in upvc window shutters with rate including cost of all materials, labour charges for fixing,suitable gasket, transportation,etc all as specified and directed by EIC.

Supplying & fixing fly proof stainless steel grade 304 wire gauge with 0.5mm dia wire and 1.4mm wide aperture of Champion or equivalent make in upvc window shutters with rate including cost of all materials, labour charges for fixing,suitable gasket, transportation,etc all as specified and directed by EIC.

Removing carefully old fully glazed MS windows / ventilators of size 3.0sqm below including frames, glazed shutters,MS grills,etcfrom plastered brick wall by cutting the holdfasts,making good and stacking serviceable materials within 500 metres lead with rate including hire charges for labour,tools,etc all as specified and directed by EIC.

Supplying and Fixing 25mm dia nominal dia CPVC pipes of Aashirvad / Prince / Sudhaker make having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including jointing of pipes & fittings with one step CPVC solvent cement, trenching,refilling & testing of joints,chasing in the brick walls,plastering with CM 1:6 complete all as approved, specified and directed by EIC.

Providing and fixing ball valve (brass) of 25mm approved quality, High or low pressure, with plastic floats complete including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.

Supplying, fabricating by welding and erecting Trench covers,doors, windows,Ventilators,vertical pipe supporting bracket/clamps with holding screw and bolts etc using M.S rolled structural members like I-Beams,channels , angles M.S pipes, MS square pipes, chequered plate,square rods,MS heavy duty Hinges, Handles, Aldrops, Tower bolts,etc of TATA, SAIL, RINL make conforming to IS specification including lifting,hoisting,fixing in position by welding at site,bolting and application of synthetic enamel paint over a coat of Zinc Chromate primer of ASIAN paints, Dulux, BERGER, Growel make all as specified and directed by EIC.The relevant code of procedure for rolled steel section dimensions, welding ,erection and hoisting and tolerances allowed shall be complied.

Constructing brick masonry manhole in cement mortar 1:4 ( 1cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) including cost and conveyance of material, labour charges for fixing and cost of necessary fixtures , rubber etc. as approved and directed by EIC.

Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains or chamber excvation and sewer pipelines (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m all as specified and directed by EIC.

Disposal of building rubbish / malba / similar unserviceable, dismantled material like structural steel or waste materials by mechanical means, including loading,transporting, unloading to specified location,beyond 50 m initial lead, for all leads (within HAL premises) including lifts involved,vehicle,labour,fuel charges,driver etc complete all as specified and as directed by EIC.

No Rupees Only

Sucessful offer that is L-1 (Lowest offer) will be determined including GST.

The payment terms shall be governed as per the terms indicated in General conditions of contract.

Amount towards GST will be paid along with RAR payment against invoice.

The tenderers are requested to abide by the rules of prevailing GST act.

This BOQ specification has to be read in conjunction with technical specifications and tender drawings if any. Any ambiguty in these have to be brought to the knowledge of contract section before submission of tender to avoid future claims/dispute.

HAL/HD/CE/T/26-27/14

HAL/HD/CE/T/26-27/14

Civil works for Upgradation of Indigenization Department

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II