REPAIR/REPLACEMENT OFCI/GI PIPE LINE AND MISC WORK AT LGJ MIL STN

Amount

Taking up or down existing Cast Iron/GI pipe line including all fittings of size 150 mm bore complete all as specified and directed by Engr-in-charge.

Taking up or down existing Cast Iron/GI pipe line including all fittings of size 100 mm bore complete all as specified and directed by Engr-in-charge.

Taking up or down existing Cast Iron/GI pipe line including all fittings of size 80 mm bore complete all as specified and directed by Engr-in-charge.

Supply & fix in replacement ductile iron pipe with rubber tyton joint of size 150 mm bore Class K-7 complete all as specified and directed by Engr-in-charge

Supply & fix in replacement ductile iron pipe with rubber tyton joint of size 100 mm bore Class K-7 complete all as specified and directed by Engr-in-charge

Supply & fix in replacement GI pipe of size 80 mm bore with all fittings complete all as specified and directed by Engr-in-charge

S&F in replacement of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of 15 mm bore dia complete all as specified and directed by Engr-in-charge

,---ditto all as per srl item No 7 above but size 20 mm bore complete all as specified and directed by Engr-in-charge

,---ditto--- all as per srl item No 7 above but size 25 mm bore complete all as specified and directed by Engr-in-charge

,---ditto--- all as per srl item No 7 above but size 40 mm bore complete all as specified and directed by Engr-in-charge

,---ditto--- all as per srl item No 7 above but size 50 mm bore complete all as specified and directed by Engr-in-charge

Taking up or down steel tubing of size 15 mm bore dia and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-charge

,---ditto--- all as per srl item No. 12 above but size 20 mm bore complete all as specified and directed by Engr-in-charge

,---ditto--- all as per srl item No. 12 above but size 25 to 32 mm bore complete all as specified and directed by Engr-in-charge

,---ditto--- all as per srl item No. 12 above but size 40 to 50 mm bore complete all as specified and directed by Engr-in-charge

Refixing old steel tubing of size 15 mm bore dia and connections in new or old position in Walls, ceiling, floors, etc complete all as specified and directed by Engr-in-charge Note : Old tubing retrieved from site shall be reused

,---ditto--- all as per srl item No 16 above but size 20 mm complete all as specified and directed by Engr-in-charge

,---ditto--- all as per srl item No 16 above but size 25 mm to 32 mm complete all as specified and directed by Engr-in-charge

,---ditto--- all as per srl item No 16 above but size 40 mm to 50 mm complete all as specified and directed by Engr-in-charge

S & F GI Tubes, 'medium grade' galvanised,of size 15 mm bore dia with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-charge

,---ditto--- all as per srl item No 20 above but size 20 mm dia bore complete all as specified and directed by Engr-in-charge

,---ditto--- all as per srl item No 20 above but size 25 mm dia bore complete all as specified and directed by Engr-in-charge

,---ditto--- all as per srl item No 20 above but size 40 mm dia bore complete all as specified and directed by Engr-in-charge

,---ditto--- all as per srl item No 20 above but size 50 mm dia bore complete all as specified and directed by Engr-in-charge

S&F in replacement of old rusted GI fitting medium grade specials viz union, tee, nipple, socket, elbow, reducer, dead plug, bend of size 15 mm to 80 mm complete as per site requirment and as specified and directed by Engg-in-Charge.

Supply & fix in replacement Chain Hoist with hook suspensions cap -01 Ton lift 3 mtr, hoist speed 4.8 mm, hoist motor 1.5(1HP) No of fall-2 Nos complete all as specified and directed by Engr-in-charge

S & F in replacement of Sluice Valve Class PN 1.6 ss spindle with CI hand wheel of size 80 mm confirming to IS 14846 all as specified and directed by Engineer in charge.

S & F in replacement of Sluice Valve Class PN 1.6 ss spindle with CI hand wheel of size 100 mm confirming to IS 14846 all as specified and directed by Engineer in charge.

S & F in replacement of Sluice Valve Class PN 1.6 ss spindle with CI hand wheel of size 150 mm confirming to IS 14846 all as specified and directed by Engineer in charge.

S & F in replacement of Sluice Valve Class PN 1.6 ss spindle with CI hand wheel of size 300 mm confirming to IS 14846 all as specified and directed by Engineer in charge.

M&L for DI Flanged fitting specials viz flange, bend , connecting piece Tee, Reducer/Enlarger of size 80 mm to 300 mm complete as per site requirment and as specified and directed by Engg-in-Charg

Excavation in trenches not exc.1.5 m wide and n.exc 1.5 m deep in soft/loose soil for laying water main pipe etc getting and forming bottom surface to required gradient complete all as specified and directed by Engineer in charge.

Returning filling in incl spreading, levelling watering and well ramming in layer n.exc 25cm thick complete all as specified and directed by Engineer in charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer in charge.

M&L for construction of valve pit chamber of size 100cm x 100cm X 100cm (Internal dimensions of chamber) including MS cover complete without disturbing thepipeline valve including necessary earth work in any type of soil, PCC 1:3:6 in bed concrete , brick work in CM 1:6 with 10mm thick plaster internally & 10 mm thick externally in CM 1:4, 3mm thick MS cover with hinges and locking arrangementfixed to angle iron frame made out of 50mm X 50mm X 6mm MS angle complete with two coats of synthetic enamel paint over a coat of red oxide zinc chrome primeron all metal works and applying two coatsof white wash on all plastered surfaces complete all as specified and directed by Engineer in charge.

M&L for dewatering of Raw water intake tank 10.0 LG of size 45 x 45 x 4 Mtr at (OPH) with pump set and manually removal of complete dirt/sludge/ silt of avarage depth 0.25 mtr from the tank and depositing where directed at a distance not less than 50 mtr from the tank. The work include scraping the side walls and bottom of tank including removal of plants etc from inside of the tank and cutting and removal of grass, shurb bushes etc from 5 Mtr around the external walls of the tank inculding transportation charge all as directed and specified. Note :- (i) Any Damagae caused to the tank during cleannig shall be made good by the contractor with out any extra cost. (ii) For cleaning of the tank eqpt and manpower shall be employed by the contractor in such a manner that cleaning in all respect should be done with in 10 days of handing over of tank. (iii) The contractor shall take the necessary arrangement to block the incoming water to sludge tank before starting the work and opening the same after cleaning the tank without any extra payment. (iv) No extra payment will be made for transportation of pumping set or any other machinary required the above work . (v) contractor will be sole responsible for dewatering, transportation of obtained mud ,T & P required and other safety mesures in respect of above work without any extra payment. (vi) Trimming , cutting ,uprooting and removing of Trees/Bushes/ Beeds/roots/ vegitable growth etc upto 5 mtr surrounding area and inside the tank floor embarcement and making good disturbed surface also included in the job.

M&L for dewatering of Raw water intake tank 110.0 LG of size 120 x 60 x 7.5 Mtr at (CWPH) with pump set and manually removal of complete dirt/sludge/ silt of avarage depth 0.25 mtr from the tank and depositing where directed at a distance not less than 50 mtr from the tank. The work include scraping the side walls and bottom of tank including removal of plants etc from inside of the tank and cutting and removal of grass, shurb bushes etc from 5 Mtr around the external walls of the tank inculding transportation charge all as directed and specified.Note :- (i) Any Damagae caused to the tank during cleannig shall be made good by the contractor with out any extra cost.(ii) For cleaning of the tank, eqpt and manpower shall be employed by the contractor in such a manner that cleaning in all respect should be done with in 10 days of handing of tank (iii) The contractor shall take the necessary arrangement to block the incomming water to sludge tank before starting the work and opening the same after cleaning the tank without any extra payment. (iv) No extra payment will be made for transportation of pumping set or any other machinary required the above work . (v) contractor will be sole responsible for dewatering, transportation of obtained mud ,T & P required and other safety mesures in respect of above work without any extra payment. (vi) Trimming , cutting ,uprooting and removing of Trees/Bushes/ Beeds/roots/ vegitable growth etc upto 5 mtr surrounding area and inside the tank floor embarcement and making good disturbed surface also included in the job.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

POOJA CONSTRUCTION COMPANY

Dashmesh Construction Company

Soma Enterprises