Edanganasalai Municipality-Providing Collection system for used water, Interception and Diversion

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete.

Supplying and filling in foundation and basement with Random Rubble Stone of size 5cm - 15 cm in layers well rammed watered and compacted etc., complete complying with standard specification.

Supplying and filling in foundation and basement with Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and filling in foundation and basement with Sand in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one Sulphate Resistant cement four fine aggregates and eight coarse aggregates) using Sulphate Resistant Cement, 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification (With SRC Cement)

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Providing & laying LDPE (Low Density Poly Ethylene) Sheet above the sand filling including all complete complying with standard specification.

Reinforced Cement concrete M30(Design mix) with minimum cement content 360 Kg/Cum using Sulphate Resistant Cement 20mm and 12.5mm(60% and 40%) gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. (With SRC cement)

RCC M30 with SRC cement - Water Retaining Structure - Below GL

RCC M30 with SRC cement - Water Retaining Structure - Above GL

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

Below Footing & Plint Beam in RCC M 25 Grade

Above GL in Ground Floor - Column in RCC M 25 Grade

In First Floor Lvl - Column in RCC M 25 Grade

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed

Water Retaining Structure

For Drain

Below Footing & Plint Beam

Above GL in Ground Floor - Column

Above GL in Ground Floor - Slab & Beam

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Brick work in cement mortar 1:5 (one cement and five Msand) using country bricks (specially moulded for well steining) of size 8¾" x 4¼" x 2" for steining of 45 cm thick for infiltration well including curing etc. complete and as directed by Town Panchayat officers.

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supply and laying of UPVC Pipes as per IS 4985 /2000 including transport, stocking at site all complete and Specials for Standard Spefications

160mm Diameter

180mm Diameter

Supplying & fixiing PVC Rungs of size including fixing in the concrete all complete

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

Supplying & fixing door shutters for Medium Density Fiber Board of exterior grade 35 mm thick, single leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of three coats of best quality varnish but excluding cost of furniture fittings. Such as 300 mm tower bolt 2nos,200mm tower bolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete.

Supplying and fabrication and fixing in position of anodised natural colour matt finish sliding window in two track in all floors with following sizes. All the three shutters with slinding arrangements, the bottom section should have Gutter arrangements so as to drain the water entering and made with extruded aluminium section for outer frames as shown below with necessary accessories such rubber beading. Aluminium clips, rubber beading,handle and fixing 4mm thick clear sheet glass including all required for fabrication etc., complete.Necessary dismantling making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers.The Al.Surfaces is to be anodised with matt finish under electrically condition in accordance with ISI 1868/1962 specification for an average anodic film thick of not less than 15 microns.

Supplying and fixing in position of alulminium anodised colour matt finish Louvered Ventilator. The outer frame will be 62x38x2mm @ 1.17 Kg / m and the louvers with moving arrangements will be made with Alu. Channel of size 60x30x4 mm @ 1.27 kg /m with necessary glass pans for louvers 4mm thick Al. Clips, including all materials, labour & power consumption charges required for fabrication if necessary chipping dismantling making holes in RCC columns,beamsor masonry wherever necessary with power drill to the extent required and make good to the original conditions after fixing etc., complete. The Aluminium sirface is to be anodised with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness of not less than15 microns (fifteen) for all sections.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Painting two coats of approved cement paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Providing & laying PVC coated Chain link fencing of size fixing in RCC post of size 100 mm X 100mm at 2.4meter interval including earh work, PCC, Casting, fixing all complete.

Pipe Laying Work

Lowering the following pipes and specials into trench and laying to proper grade and alignment complete as per standard specifications and as directed by the Departmental Engineer.

110mm HDPE pipes

125mm HDPE pipes

160mm HDPE pipes

280mm HDPE pipes

250mm DI K7 Socket / Spigot pipes

Jointing HDPE Pipes and Specials by butt fusion welding / electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc., complete as per directed by Departmental Engineer.

110mm HDPE pipes

125mm HDPE pipes

160mm HDPE pipes

280mm HDPE pipes

Jointing the DI S/S pipes and specials with rubber gaskets (tyton joint) including cost of lubricants, cost of jointing materials and testing to the required pressure with water etc., complete as per standard specifications and as directed by the Departmental Engineer.

250mm Dia

Jointing the C.I/ D.I Double flanged pipes and specials with rubber insertion to the required specifications with M.S. bolts and nuts, complete. (including cost of jointing materials)

100mm Dia

125mm Dia

150mm Dia

250mm Dia

Cutting D.I. Pipes true to axis and filling smoothly and finishing the ends complete as directed by the Departmental Engineer

250mm Dia

Testing of M.S. / C.I. / D.I / P.V.C. / H.D.P.E / pipes with hydraulic testing equipment by filling with waterand testing to recommended pressure in convenient stretches and attending the bursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes.

110mm HDPE pipes

125mm HDPE pipes

160mm HDPE pipes

280mm HDPE pipes

250mm DI K7 Socket / Spigot pipes

Construction of masonry valve pit as per Type design for Sluice valve valve, scour valve,air valve including fixing the valves including earthwork excavation for foundation, P.C.C.1:4:8 using 40mm HBG metal for levelling course,brick workin CM 1:5 for side wall,plastering with CM 1:3,12mm thick,RCC 1:11/2:3 using 20mm HBG stone jelly for cover slab, providing cut stone inCM 1:3 including supply, fabricating and placingof RTS grills for the following valves includingcharges for precasting and fixing surface box,valves and specials in position ,refilling the sidesof the pit etc. complete. and as directed by Corporation Engineers.

80 mm Scour valve On 100-150mm dia Pipe - 1.20m X 0.9m X 1.1 m

100 mm scour valve On 200-250mm dia Pipe - 2.0m X 1.0 m X 1.2 m

Refilling with excavated soil (other than sand) complying with standard specification in layers of 15cm watered well rammed and consolidated after the pipes and specials are laid,jointed and tested etc. and removing and depositing the surplus earth complete as directed by the Engineer--in-charge.

Refilling for 110mm HDPE pipes

Refilling for 125mm HDPE pipes

Refilling for 160mm HDPE pipes

Refilling for 280mm HDPE pipes

Refilling for 250mm DI K7 Socket / Spigot pipes

Disposal of surplus earth including loading and conveyance within a distance of 1 km (basic cost of earth is zero) including loading charges and Conveyance Charges of 1 km distance.

PIPE & VALVE MATERIAL COST

Supply and delivery the following sizes & class of HDPE pipes PN 6 PE 100 conforming to IS:4984/2016, as specified in Technical specifications in standard lengths including labour charges for loading, unloading and stacking at site etc. complete as per standard specifications and as directed by the Departmental Engineer.

110mm HDPE pipes

125mm HDPE pipes

160mm HDPE pipes

280mm HDPE pipes

250mm HDPE pipes

Supply, delivery of HDPE Specials As Per IS 1736-1995 including unloading, transportation and stacking charges.Specials for HDPE pipes as per IS 8360/1977/ Part I(Reaffirmed 1992) Part II and III (Reaffirmed 2002). Reaffirmed to IS 4984-2016 conveyance to work site etc., complete as directed by the Engineer charge.

110 mm HDPE Bends -90°

125 mm HDPE Bends -90°

160 mm HDPE Bends -90°

280 mm HDPE Bends -90°

125 mm X 110 mm HDPE Reducer

160 mm X 110 mm HDPE Reducer

160 mm X 125 mm HDPE Reducer

280 mm X 110 mm HDPE Reducer

280 mm X 125 mm HDPE Reducer

280 mm X 160 mm HDPE Reducer

Supply and delivery of DI Socket /Spigot specials of conforming to IS 9523/2000 specifications at site of work including all taxes, duties, loading, transportation, unloading, insurance etc., complete and as directed by Engineer incharge.

Manufacture, Supply and Delivery of CI Double air valves as per IS 14845/2000 including loading freight, transit, unloading and stacking them at site etc. complete

50mm dia

80mm dia

Manufacture, Supply and Delivery of CI Sluice valves for Scour as per IS 14846/2000 including loading freight, transit, unloading and stacking them at site etc. complete

80 mm Scour valve On 100-150mm dia Pipe

100 mm scour valve On 200-250mm dia Pipe

Providing and laying Wet mix macadam base course of 250mm compacted thicknes in two layers of 125mm thick or else as specified on the prepared sub-base with graded stone aggregate and granular of quality size and grading in layers specified,including mixing in base mix plant spreading in uniform layer with motor grader and compaction with vibrating roller of 80 to 100 KN static weight and fine dressing to required grade and cross slope as shown on the drawing equipments as per technical specification clause 406.

Providing and laying Prime coat over WMM surface using 7 Kg of bitumen emulsion per 10 Sqm area including labour charges for preparing the surface and applying the required quantity of bitumen as prime coat etc, complete as directed by the departmental officer.

Providing and laying tack coat of 2.5 kgs/10 sqm over the Prime surface treated with binder using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5

Providing and laying Bituminous Concrete to 30mm thick using 0.13 cum of 19.00 - 9.50mm, 0.17cum of 9.50 -2.36mm and 0.26cum of 2.36 and below metal by adding the shredded plastic 10% of bitumen quality 5.03 kg (50.30 x 10% = 5.03 Kg) shredded plastic waste over the aggregate heated to 170 degree Celsius in the central hot mix plant mixed well with 45.27 kgs of hot bitumen vG30 bitumen (160 degree celsius) 60/70 grade for premixing per 10 sqm to lay 30mm compacted thick of bituminous concrete including the cost of materials to CMP site, heating the bitumen and aggregate to the required temperature and mixing the minimum required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 30mm with mechanical paver to the specified grades and cross sections and consolidated by 80-100KN Vibratory Roller / Pneumatic Roller to the required density etc., including labour for loading bitumen in to bitumen tank and metal to feeder unit, labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 ton CMP with bitumen boiler, tipper trucks, Paver finisher / 9mm paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 as MORTH Rev-5.

ELECTRICAL & MECHANICAL WORKS

Supply & Fixing sludge cutter pump sewage non clog pump discharge range 1050-220 Lpm, Head 5-15 mtrs, Spees 2800 RPM, 5HP motor, impeller, pump & motor, body - Cast Iron materials including of all fittings and panel board.

Three Phase Panel Board Star- Delta With Two Level Guard And Auto Start

L.T. cables 3,3.5,4 CORE 1.1 KV grade armored aluminium conductor cross linked poly ethylene insulated PVC sheathed cables conforming to IS 7098 (PART I)/1988 and as amended thereafter with ISI marking 10 sqmm 3 core cable

Supplying& Fixing various Screens & Tank in MS grill works to suit the required size including fabrication, transport, storage, fixing in the concrete structure including all materials, labours, Machinery, Tools & plants all complete

Centrifugal Pump - 4.5Cum/Hr (75 Lpm)

AC three phase , 415 V+/- 10% , 50 Hz +/- 5% - Starter

Squirrel cage induction motor

2T capacity hand operated over head Travelling (HOT) crane suitable for a span upto 6 Mtrs, and travel length upto 10 Mtrs. with clear lift upto 6 Mtrs. including gear type chain pulley block with GI chain and geared Travelling trolley complete with all accessories including girder

Supplying & Fixing Settler Mechanisam in Structural Steel to suit 8.7m x 8.7m x 3.0m SWD (0.5m FB) including fabrication, transport, storage, fixing in the concrete structure, Painting one prime coat & anti corrosive paint including all materials, labours, Machinery, Tools & plants all complete

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V

Wiring with 2 x 4sqmm (56 /0.3 ) PVC insulated single core unsheathed copper

Supply and fixing of TNEB Board suitable for 3 Phases 63A service connection

Supply and fixing of 32 A TPN MC switch on incoming and 3 Nos 32 A DPMC Switch

1200mm ( 48'' ) sweep AC ceiling fan

Supply and fixing of 20Watts LED Light

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains

Supply and Delivery of 120W LED Street light Fittings with dimmable driver,minimum of 300mm length of 3 core 1 sq.mm copper cable and male connector complete as per technical specification mentioned in the tender document

Supply, Erection of 8m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm, Top Pole Dia - 70 mm, Thickness of Pole - 3 mm, The pole should be hot dip galvanized confirming to BESN, ISO-1461 with thickness of 65 Micron

Supply, delivery and Installation of Single Phase – RF+4G gateway streetlight controller including installation accessories as per technical specification in the tender document

Installation of 120W LED Fittings for New light labour charges for one lamp.

Supply, delivery and Installation of 3 core 1.0 sq.mm copper cable with length of 2 m with 2 Nos of bimetal hook connector in one end and IP 66 Female connectoir in the other end suitable to connect male connecytor in LED fittings as per Technical specification.

Supply, delivery and del;ivery of 1.2m ,70mm dia GI Bracket suitable for LED Fitting of 90W to 120w with 2 set of GI Clamps and nessery bolt and nuts etc

PLUMBING WORK

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supply and delivery and fixing of 1000 litre HDPE tank as per IS 12701 / 1996 including loading,unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Supply and delivery and fixing of Following UPVC pipe and specials including labour charges and charges etc.,

40mm upvc pipe

32mm upvc pipe

25mm upvc pipe

32mm upvc Elbow

40mm upvc Elbow

32mm upvc Union

40mm upvc Union

32mm upvc Cupler

40mm upvc Cupler

32 x 25mm Reducer

25mm Tap

110mm pvc

GST Amount for providing Service to Government Contract Works for the Above construction works. (GST Amount is the Total GST Amount for total overall quoted amount above this row for this work)

SRI SRINIVASA ENGINEERING WORKS