Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.3 LAccepted-AOC KRISHNA S NO 15 6A PLOT 26 KALPATARU COLONY B WARJE NAKA PUNE 411 052 | PUNE | MAHARASHTRA | 411052 | L1 | Accepted-AOC Awarded as a lowest (L1) | |
| 2 | L2₹39.5 L+₹4.6 L (13.0%)Rejected-AOC | L2 | Rejected-AOC Being second lowest | |
| 3 | L3₹46.5 L+₹11.5 L (33.1%)Rejected-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L3 | Rejected-AOC Being third lowest | |
| 4 | L4₹49.4 L+₹14.5 L (41.5%)Rejected-AOC PASHAN PUNE | L4 | Rejected-AOC Being fourth lowest | |
| 5 | L5₹53.0 L+₹18.1 L (51.8%)Rejected-AOC FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L5 | Rejected-AOC Being fifth lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
6 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GERD PASHAN PUNE
GERD PASHAN PUNE
WELCOME MAINTENANCE TO VARIOUS MD ACCN UNDER AGE BR PASHAN
2022_MES_550184_2
GERD/PSN/TOKEN/24 OF 2022-23
Open Tender
Civil Works
Item Rate
334 days
GERD PASHAN PUNE
As per tender documents
9 documents required · 9 mandatory
₹500
GERD PASHAN PUNE
₹90,000
Yes
2 Jan 2023
9 Nov 2022
9 Dec 2022
9 Nov 2022
6 Dec 2022
16 Nov 2022
9 Nov 2022 - 13 Nov 2022
Amount
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc, laid, bedded and pointed in any mortor complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above GL) including floor tiles if any of any description and thickness complete all as specified and directed By Engineer-in-Charge.
Material and labour for 40mm thick Cement concrete 1:2:4 type B-1,( using 20mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed by Engineer-in-Charge.
Material and labour for coloured Non Skid ceramic tiles 7 mm to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 complete all as specified and directed.
Material and labour for coloured Non Skid ceramic tiles 7mm to 8mm thick polished(square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 complete all as specified and directed.
Material and labour for dark shade (double charged) Vitrified ceramic tiles 08mm to 09mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
Material and labour for 15mm thick dubbing out average 15mm thick on irregular faces of walls on stone masonery or concrete surfaces in cement mortar 1:6 complete all as specified and directed.
Material and labour for glazed, coloured ceramic tiles in verticle surface of size 300mm x 600mm x 7mm to 8mm thick set and joined in neat cement slurry and pointed in cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement plaster in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
Material and labour for 18mm to 20mm thick granite (of any type) work (Table rubbed and polished) in steps, jambs, pillars, windows cills, cooking platform and like fixed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer-in-Charge.
Supply and Fix rubber moulded glazed (of any colour and pattern) chequred cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment laid over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in Charge.
Material and labour for 75 mm thick Cement concrete 1:3:6, type C1 (using 20 mm graded crushed stone aggregate) in plinth protections/ hard standing path etc finishing the surface without extra cement even and smooth complete all as specified and directed by Engineer-in-Charge.
Taking down Chowkats or frames exceeding 1.5 Sqm and not exc 4 sqm each (Without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge.
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each complete all as specified and directed By Engineer-in-Charge.
Material and labour for powder coated Aluminium sliding windows three track with and including two glass shutters using and including 5 mm thick tinted glass of make Modi guard and one shutter with and including stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using and including Aluminium powder coated section, Aluminium cleat, PVC track, bearing, handle lock rubber beading, etc complete all as specified and directed by Engineer-in-Charge. Note Size of aluminum sections are as under :- (i) Three track top and vertical – Jindal main – 2010 Section No 20621. (ii) Three track bottom - Jindal main – 2010 Section No 20620. (iii) Shutter vertical section - Jindal main – 2010 Section No 20606. (iv) Shutter top and bottom - Jindal main – 2010 Section No 20604 (v) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605.
Material and labour for Aluminium powder coated ventilators partly fixed and partly louvered of aluminium section designed DG-2762 (40 mm x 32 mm x1.5 mm thick) (wt 0.668 kg/metre) frame and DG-2763 and middle section of designed DG-2763 (40 mm x 32 mm x 1.5 mm thick) (wt 0.654 kg/metre), middle section DG-2546 (17.27 mm x 17.15 mm x 1.22 mm thick) (wt 0.124 kg/metre) including 5 mm thick pin headed figured glass louvers with and including blades of 100 mm heavy duty including with aluminium lever handle fixed panel shall be provided with 5 mm thick pin headed figured glass including all necessary rubber packing, anodized aluminium snap beading fixed with and including minimum 6 Nos of suitable size galvanised screws with PVC plug etc complete all as specified and directed by Engineer-in-Charge.
Dismantling boarding of any description, fixed in any position complete all as specified and directed by Engineer-in-Charge.
Material and labour for 18mm/19 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work / steel frame complete all as specified and directed by Engineer-in-Charge.
Material and labour for PVC cupboard/cabinate in required size at site made including out of 18mm thick (three layer PVC board) having density 600 cum, one side decorative lamination and other side balancing lamination sheet consisting of carcass 18mm thick PVC sheets and provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5 mm screw etc. The panel shall be fabricated using adhesive and screw where ever required. All edges shall be covered with 2mm thick edge bonding tape or 90 degree bent finish as per make and specification mentioned approved by Engineer-in-charge complete all as specified and directed. Make : Rajshree pastiwood, sintex, M/S Dura Plast
Supply and fix in repairs 40mm flaps (when open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised.complete all as specified and directed by Engineer-in-Charge.
Supply and fix 40mm dia, cupboard knobs fixed with nut, screw and washer of mild teel, bright finished complete all as specified and directed by Engineer-in-Charge.
Supply and fix hasp and staple 75mm Aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-Charge.
Supply and Fix mild steel framed work such as grills, gratings, etc, with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, framed work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.
Material and labour for Preparation of new or previosly untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.
Supply and Fix solid PVC door frame of size 50mm X 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed by Engineer-in-Charge.
Supply and Fix Factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement. complete all as specified and directed by Engineer-in-Charge.
Supply and Fix 125mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and Fix 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and Fix 125mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.
Supply and fix 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated (2nd class hard wood) complete all as specified and directed by Engineer-in-Charge.
Supply and Fix 35mm thick 2nd class HW skeleton shutters, open rebated and prepared to received glass, gauze, mesh etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass or mesh etc, sizes of members of shutters as specified in SSR Part I section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.
Supply and fix factory made 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.
Supply and Fix 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed.complete all as specified and directed by Engineer-in-Charge. .
Supply and Fix 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and Fix 125mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed by Engineer-in-Charge.
Supply and Fix 150mm long Extruded brass handles, fabricated type polished complete all as specified and directed by Engineer-in-Charge.
Supply and Fix 150mm long Floor door stopper of brass body and tongue, with hard drawn steel spring Fixed in floor complete all as specified and directed by Engineer-in-Charge.
Supply and Fix Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of new wooden surfaces of width or girth over 10 cm and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed by Engineer-in-Charge.
Dismantling ceiling boards/AC/Fiber /pulp/insulation boards/slabs any thickness including cover fillets complete all as specified and directed by Engineer-in-Charge.
Material and labour for providing and fixing gypsum board 12mm thick in ceilling fixed with screw as per manufacturers instruction and including anodised aluminium snap grid size of grid 600mm X 600mm frame work for false ceilling complete all as specified and directed by Engineer-in-Charge.
Providing and fixing PVC False Ceiling consisting of 600mm x 600mm, 16 mm thick Plain PVC sheet of Density 600kg /cbm solid PVC insulated panels wall thickness 1.0 mm on both side on 20 mm EPS panel is stuck on both side with adhesive the panel insert in a frame work made using anodized aluminum T section of sizes 1” x1” (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2’x2’(600mmx600mm). The aluminum framework is supported from the ceiling with the help of G.I. hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminium1”x1” (25mmx25mm) angles complete as per direction of Engineer-In-charge, manufacturer’s specification & drawing.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Rendering 20mm thick on stone masonry surfaces or other than fair face of stone masonry or on one side of lathing in cement mortar 1:4 using WPC, complete all as specified and directed by Engineer-in-Charge. (wpc will be measured and paid seprately)
Material and Labour for Rendering 15mm thick on stone masonry surfaces or surface other than fair face of stone masonry or on one side of lathing in cement mortar 1:6 ,complete all as specified and directed by Engineer-in-Charge.
Material and Labour for Rendering on ceiling, 5mm thick on fair faces of concrete surfaces in cement mortar 1:3 complete all as specified and directed By Engineer-in-Charge.
Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered wall surface and applying two coats oil bound distemper a coat of 3mm thick wall interior wall care putty and a coat of alkali resistant primer complete all as specified and directed.
Material and labour for preparation of newly plastered wall surface and applying two coats of acryalic weather proof exterior emulsion paint over a coat of 3mm thick exterior wall care putty and a exterior acrylic primer on wall complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of old ceiling surfaces and applying two coats of white wash complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Material and labour for two coat French polishing on old surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler complete all as specified and directed by Engineer-in-Charge.
Complete removal of exisiting treatment on wall surfaces and preparation of old wall surfaces by filling holes etc and applying two coats of acryalic weather proof exterior emulsion paint over a coat of exterior primer on wallcomplete all as specified and directed By Engineer-in-Charge.
Material and labour for complete removal of existing treatment (Paint / distamper) on walls and applying 3 mm thick wall care putty after that applying two coat of distemper oil emulsion over a coat of alkali resistance primer on wall complete all as specified and directed by Engineer-in-Charge.
Taking down of door/window shutter and refixing the same after necessary easing for smooth functioning of any size complete all as specified and directed by Engineer-in-Charge.
Material and labour for repairing unserviceable window/ doors by replacing damaged/ missing parts of mild steel windows/door & making good (easy to opening/closing) complete all as specified and directed by Engineer-in-Charge Note :- Spare parts replaced shall be measured separately as supplied only
Supply only Projecting type mild steel hinges (for windows) complete all as specified and directed by Engineer-in-Charge.
Supply only Mild steel handles for steel windows with necessary closing arrangement to match the existing windows complete all as specified and directed by Engineer-in-Charge.
Supply only Mild steel peg stay, 300 mm long complete all as specified and directed by Engineer-in-Charge.
Supply and Fix in repairs Curtain rod Stainless steel of grade 304, 20mm/25 mm dia heavy grade curtain rod as per windows and door size including finials (brackets on end) with brackets duly screwed on wall with plastic roll plug and stainless steel screw of 38 mm long.complete all as specified and directed by Engineer-in-Charge.
Supply and Fix in repairs 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and Fix in repairs 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and Fix in repairs 125mm long Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 complete all as specified and directed by Engineer-in-Charge.
Supply and Fix in repairs 150mm long Extruded brass handles, fabricated type polished complete all as specified and directed by Engineer-in-Charge.
Supply and Fix in repairs brass body door stopper of 150 mm long overall length and tongue with hard drawn steel spring complete all as specified and directed By Engineer-in-Charge.
Supply and fix in repairs 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs Vitreous China wash basin, white, flat back, size 550mmx400mm excluding taps, waste chain and plug and porcelain stopper fixing on existing brackets, including supply and fixing of flexible waste outlet pipe of 32 mm dia of required length complete all as specified and directed by Engineer-in-Charge.
Supply and fix 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight 45gms, 32 mm suitable for vitreous china wash basin complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs Swan Neck fancy type 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (Min wt 15mm bore- 675 grams) complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs 10Litres capacity low level PVC flushing cistern valveless, syphonic action type, , white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts (excluding flushing cistern and flush pipe) including pan seat cover complete all as specified and directed by Engineer-in-Charge. Make Jaquar Cat No CNS-WHT-WH10/including pan seat cover CNS-WHT-WCS1 or techno commercial equivalent.
Supply and fix in repairs Vitreous China squatting pan, `Orissa' pattern, size 580 mm x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding complete all as specified and directed by Engineer-in-Charge. Make: cera( cat no CNS-WHT-OP01) or techno comercial equivalent.
Supply and fix in repair 15mm bore Fancy type long body chromium plated Bib taps, cast copper alloy fancy type, screwed down, screwed for iron pipe or for brass ferrule (minimum weight 550 grams) complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs 15mm bore chromium plated Angle cock, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions ((minimum weight 400 grams) complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PTMT waste coupling (half or full threaded) (Min wt 40mm bore - 60 grams) and PVC waste pipe 32 mm dia complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, including PTMT waste coupling (half or full treaded) (Min wt 40mm bore - 60 grams) and PVC waste pipe 32 mm dia complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repair stainless steel plate rack of size 750mm x 1000mm made out of 1mm thick stainless steel sheet of grade 304 fixed all as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs soap dish, complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs 2 in 1 mixture valve of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed complete all as specified and directed by Engineer-in-Charge. Make Jaquar Cat No CON-273KNUPR or techno cmmercial equivalent.
Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with and including chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs swivel shower chromium plated with shower arm 15 mm size, 195 mm long with bend of 45º with flange fixed to 15 mm dia GI tubing, shower roses with or without swivel joints ,125mm size ,including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs toilet paper holder of chromium plated fixed to walls with and including chromium plated brass screws complete all as specified and directed By Engineer-in-Charge. Make Jaquar cat no CAN-1153N or techno commercial equivalent.
Supply and fix in repairs two way bib cock of brass chromium plated, 15mm bore, screwed down, screwed for iron pipe or for brass ferule and fixed complete all as specified and directed by Engineer-in-Charge Make: Jaquar cat no CON-041KN or techno comericial equivalent.
Supply and fix in repairs 1.2metre long chromium plated health foucet including holder fixed to wall complete all as specified and directed by Engineer-in-Charge. Make : Jaquar cat no ALD-CHR-573 or techno commerical equivalent.
Dismentaling water tanks exceeding 250 litres and not exceeding 500 litres complete all as specified and directed by Engineer-in-Charge.
Dismantaling water tanks exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed by Engineer-in-Charge.
Supply and fix 500 Litres ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed by Engineer-in-Charge.
Supply and fix 1000 Litres ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed by Engineer-in-Charge.
Supply and fix 500 litres capacity PVC loft water tank ISI embosed and fixed in elevated positon all as directed, complete all as specified and directed by Engineer-in-Charge.
Taking out old chocked GI pipe and connections, including cleaning for refixing or removal to store for the following of sizes from trenches, walls, ceilings, floors etc :- (a) 20 mm bore
(b) 15 mm bore
Supply and fix GI tubing medium grade with and including all fittings complete to walls and ceilings or laid in floors of the following sizes, complete all as specified and directed. (a) 20 mm bore
(b) 15 mm bore
Material and Labour for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth as in stone / concrete block walls, complete all as specified and directed.
Supply and fix in repairs PVC body box type cabinet mirror of size 450mm x 600mm complete all as specified and directed by Engineer-in-Charge. Make: Prayag or techno commercial equivalent.
Supply and Fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc including all pipe fittings complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones and Supply and fix 4mm thick Sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm each pane, complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repairs plastic water closet seat cover, white colour, soft closing type, with and including mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engineer-in-Charge.
Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.
Material and labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 with old size bricks, complete all as specified and directed by Engineer-in-Charge.
Material and labour for polishing of existing terrazzo tile/ Marble/ Kota Stone by rubbing with grinding machine including using 220 grit to 350 grit caborundum stone repair and filling of joints, cement with pigment to match the existing tile washing throughly and finally polishing with bee wax polish complete all as specified and directed by Engineer-in-Charge.
Material and labour for polishing of existing terrazzo tile dado/ skirting by rubbing with grinding hand machine including using 220 grit to 350 grit caborundum stone repair and filling of joints, cement with pigment to match the existing tile washing throughly and finally polishing with bee wax polish complete all as specified and directed by Engineer-in-Charge.
Taking down carefully Copper aluminium point wiring (light, Fan, exhaust Fan, Bell, socket or power point) complete including fixture and fitting such as switches, sockets, power socket, bell, bell push, light fittings, regulator, bracket holder, boards and making good disturbed surfaces of wall and ceiling etc complete all as specified and directed by Engineer-in-Charge.
Taking down carefully unserviceable sub main wiring including conduit/casing patti etc complete all as specified and directed by Engineer-in-Charge.
Taking down unserviceable DBs any type / size carefully disconnecting and making good disturbed surfaces complete all as specified and directed by Engineer-in-Charge.
Taking down unserviceable MCCB/ MCB SP/SPN/Isolator of any rating and size complete all as specified and directed by Engineer-in-Charge.
Material and labour for point wiring complete with single core multi stranded Copper conductor cable of size 1.5 sqmm PVC insulated unsheathed 1100 volt grade in and including PVC casing capping Tee junction bends etc fixing to wall/roof and PVC switch board / hylam sheet of 3 mm thick in existing M.S. sunken boards of suitable size for housing switch sockets etc including 1.5 sqmm. green PVC insulated wire for earth continuity complete all as specified and as directed for the followings:- (a) One light point controlled by one ; one way switch
(b) One Fan/Exhaust point controlled by one ; one way switch
(c) One 3 pin 5 Amp socket out let controlled by one switch on independent board.
(d) --do-- but on same board.
(e) One bell/buzzer point controlled by one push button.
(f) One light point controled by two way switch
All as per item 113 above but with 2.5 sq mm size pvc insulated and unsheathed 1100 volts grade FRLS single core stranded ( multistranded) copper conductor cable for 3 pin socket outlet 15 amp on independent board including one continues run of PVC insulated green in colour 2.5 sq mm multistranded copper conductor earth wire connecting to earth dolly complete all as specified and directed by Engineer-in-Charge.
Supply and fixing switch piano flush button type , singlepole one way 5 Amps complete all as specified and directed by Engineer-in-Charge.
Supply and fixing switch piano flush button type , single pole two way 5 Amps complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Bell push flush type SP 5 Amps complete all as specified and directed by Engineer-in-Charge.
Supply and fixing switch socket combination out let 5 pin 6 Amps flush type complete all as specified and directed by Engineer-in-Charge.
Supply and fixing switch socket out let 2 in 1, 3 pin 5 and 16 Amps flush type Universal complete all as specified and directed by Engineer-in-Charge.
Supply and fix ceiling rose ,3 phase ,PVC polycarbonate ,insulated body complete all as specified and directed by Engineer-in-Charge.
Supply and fix stepped type elctronic fan regulator 240 V 50 HZ , 100 Watts flush type suitable for 1200mm/1400mm sweep ceiling fan complete including connection and dismantling of unserviceable regulator all as specified and directed.
Supply and fix call bell (Ding Dong) 240 V, 50 Hz complete all as specified and directed.
Material and labour for lamp holder pendant/angle type insulated body with back plate complete all as directed and specified by Engineer-in-Charge.
Material and labour for sub main wiring using two single core 6 sqmm copper conductor,FRLS cable in including PVC casing caping of suitable size,including one run of PVC insulated copper earth continuity wire of 6.0 sqmm and connected to earth dolly including cutting chases for concealed conduit wiring complete all as specified and as directed. Note: 2 run of 6 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 6 earth wire and one run of PVC conduit will be measured as one unit.
Material and labour for Sub main wiring complete with 2 runs of 2.5 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through PVC casing and caping / PVC conduit accessories fixed on surface/wall celing etc including provision of 1 run of 2.5 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity complete all as specified and directed. Note: 2 run of 2.5 sqmm ( 01 for phase and 01 for neutral) with 1 separate run of 2.5 earth wire and one run of PVC conduit will be measured as one unit.
Supply and fix surface and wall mounted Inverter LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver, 20 Watt 230V complete with all accessories internally prewired and provision of flexiable three core copper conductor 23/0.0076 upto 1.5metre from celing rose to fitting all as specified and directed by Engr-in-Charge. (Make: Cat No LHEXACP7FN1W020 of Havells or techno commercial equivalent in Philips / Bajaj
Supply and fix surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver, 10 Watt 230V complete with all accessories internally prewired and provision of flexiable three core copper conductor 23/0.0076 upto 1.5metre from celing rose to fitting all as directed by Engr-in-Charge. (Make: Cat No LHEXACP7IN1W010 of Havells or techno commercial equivalent in Philips / Bajaj
Supply and fixing of surface mounting round downlight LED 12 watt luminarie complete fitting with all fixing arrangement complete all as specified and directed by Engr-in-Charge. Make- Havells Cat No-INTEGRANEDSURFACEDLS10WLED865S or techno comercial equivalent in PHILIPS/WIPRO/CG/Bajaj
Supply and fixing of LED security light fitting 25 watt with pressure dia cast housing, prismatic, polycarbonate diffuser and IP 65 protection including 0.6 metre long of suitable size (as per manufacturer standard) GI Pipe in 45 degree bend shape and necessary clamping devices required at site complete all as specified and directed by Engr-in-Charge. Make-Havells Cat No ENDURASUNDOWNSL25WLED765PASYBOPCHID or techno commercial equivalent in PHILIPS/WIPRO/CG
Supply and fix sheet metal enclosure MCB distribution board. Single pole and neutral (SPN) 240 volts 8 way with IP-43 IK-09 protection with metal door complete with appropriate size bus bar and neutral link, complete all as specified and directed. Make : Legrand Cat No-607711 of Legrand or techno commerical equivalent in Havells/ Standard/ Indo Asian.
Supply and fix MCB SPN 20Amps to 40 Amps 10 KA, 240 V connected through copper thimbles of suitable size complete all as directed and specified by Engineer-in-Carge. Make: Legrand/ABB/Siemens/Merlin Gerin
Supply and fix MCB SP 3Amps to 32 Amps 10 KA, 240 V connected through copper thimbles of suitable size complete all as directed and specified by Engineer-in-Charge. Make: Legrand/ABB/Siemens/Merlin Gerin
Material and labour for Earthing complete with galvansied steel earth plate electrode 600mm x 600mm X6 mm thick buried directly in ground (earth pit not less than 2.25metre deep below normal ground level) with top edge of the plate not less than 1.5metre below ground level earth plate connected with 4 mm dia GI wire as earthing lead by means of bolts, nuts, check nut and wahers of galavanised iron all as shown in Electrical plate No.3 of MES Sch part I and testing on completion. Including neccessary excavation and earth work, adequate common slat, charcoal dust and funnel PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate pit with pre-cast RCC (1:2:4) type B-1 cover using 20mm graded crushed stone aggregate 40mm thick reinforced with 8 mm dia bars, MS bar 3 Nos both ways funnel with 20, mm dia GI grade watering pipe earthing lead with GI protection pipe medium grade 15mm dia up to 7.5metre from earth plate to equipment earth point complete all as specified and directed including dismantling of existing earthing.
Taking down carefully after disconnecting electrical/water supply connections and transporting to the work shop for carry out the servicing / over hauling of the storage type electric water heaters (Geysers) of storage capacity 25 litres / 50 litres of any make / type by cleaning the inner surface of the tank / heating element with chemical to remove the scaling / rust and reassembling the same after replacing burnt out parts and refixing on its original position including testing complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repair heating element of the following ratings as required at site including rubber washer/packing complete all as specified and directed. Make : "RECOLD /THEETA / SWARNA or equivalent ISI marked. (a) 1/1.5 KW
Supply and fix in repair thermostat stem type suitable for geysers 25 litres / 50 litres ISI marked complete all as specified and directed.
Supply and fix in repair PVC connecting pieces with two brass adaptors 18" long and fixing in position for cold / Hot water / inlet connection complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repair steel braded pipe for Hot water /outlet connection with two brass adopters as required length at site and fixing postion complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repair Gun metal Non-Return valve 15mm dia complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repair indicator lamp rectangular / round type suitable for 25 litres / 50 litres geysers complete all as specified and directed by Engineer-in-Charge.
Supply and fix in repair GM pressure release valve 15mm dia complete all as specified and directed by Engineer-in-Charge.
Taking down the defective ceiling fan of any sweep and make after disconnecting electrically & mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the insulation value complete all as specified and directed by Engineer-in-Charge.
Taking down the repairable exhaust fan of 300 MM / 380 MM sweep, any make, single phase, 230 volts, 50 hz, AC after disconnecting electrically and mechanically and transporting to the work shop dismantling, examine & carry out the repairs as required and brought back to site, re-fixing, testing in all respect for smooth running and comprising of the following:- (a) Servicing/overhauling the exhuast fan by thoroughly clelaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of super enameled varnish over the winding to improve the resistance value complete all as specified and directed by Engineer-in-Charge.
Sky Vision Construction
S.K.HARAL
Rays Breakers
AJAY ENTERPRISES
sanjay m. suryawanshi
Baljeet Singh Choudhari
M/s S.R lahoti
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .