Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.7 LAccepted-AOC | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹25.3 L+₹20,950 (0.84%)Rejected-Finance ROOM NO 214 GANESH MURTHY NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹27.0 L+₹1.9 L (7.65%)Rejected-Finance FLAT NO B 401 4TH FLOOR NAVADURGA CO OP HSG SOCIETY LTD PLOT NO 7 SECTOR 19A NERUR EAST NAVI MUMBAI THANE MAHARASHTRA 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹30.7 L+₹5.6 L (22.3%)Rejected-Finance | L4 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ng Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8948 REPAIR MAINT TO CERTAIN BR MARINE ASSETS INCLUDING REPLACEMENT OF PCC AND MS COVER AT CG DOCK AND K AND L BERTH AND ASSOCIATED AREAS AT ND MB
2023_MES_595586_1
8948/E8
Open Tender
Civil Works
Item Rate
183 days
GE (NW) KUNJALI
Please refer tender documents
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹98,000
Yes
22 Oct 2023
15 May 2023
14 Jun 2023
22 May 2023
12 Jun 2023
29 May 2023
15 May 2023 - 22 May 2023
Amount
Dismantling wrought or mild steel work of any description.
Demolition of plain cement concrete of any description and in any position not other wise speifically provided for.
Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided for.
Taking down cement plaster on brick/concrete surfaces built in cement mortar including raking out joints, hacking for key scrubbing down with water etc complete.
Dismantling timber scantlings 40 sq. cm and over in section, in any position in unframed work. Note:- Qty of Timber which is not considered in Schedule of Credit shall be deposited to users store.
Supply and applying microconcrete of Fosroc, Dr Fixit, or equivalent around edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equivalent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition and directed by Engineer-in-Charge.
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing ready mix polymer plaster and finally finishing the surface all as specified and directed.Make :- Dr.Fixit/Sunanda/Chemestik/Fosrok as aprooved. (Note :- New reinforcement and MS Sections will be measured and paid separately)
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally covering with Microconcrete and finally finishing the surface all as specified and directed. Make :- Dr. Fixit/Sunanda/Chemestik/Fosrok as aprooved. (Note :- New reinforcement and MS Sections, microconcrete and form work if required will be measured and paid separately)
Supply only ready mix microconcrete mixture. Make : Dr.Fixit/Sunanda/chemestik/Fosrok as approved.
S&F welded steel wire fabric, cut to length, fixed to steel members/reinforcement steel, weight per Sqm nexc. 4 Kg.
M&L for 25mm thick cement concrete type B-0, 1:2:4 (Using 12.5mm graded stone aggregates) as in floor finish without extra cement all as specified and directed. Note : Rate for cleaning trench manually and removing all dust, mud, and waste materails is deemed to be included in quoted unit rate.
Material & labour for cleaning the surface of the stone/concrete in jetty , dock,retaining wall, piers of jetty and bottom portion of deck slab etc above sea with mechanical grinder and specialized water misting techniques applying water jet using a fine nozzle sprinkling system calibrated to spray a fine mist along the stone/concrete surface complete and removing all sea vegetation complete all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Material and labour for applying two coats of anti carbonation paint DEKGUARD S of FOSROC or equivalent over a coat of primer DEKGUARD of FOSROC or equivalent over vertical concrete surface in jetty/dry dock above sea level all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Cleaning of concrete surface by wire brush and removing all loose particles over caissons and applying 3mm bitumen layer over 1mm thick tarfelt complete as specified and directed by Engineer-in-Charge.
Formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels cantilevers, shelves including supports, overhangs, etc. Also splays between floors and beams, etc. for rough finished surface of concrete.
Use & waste of Formwork to sides of pillars posts, struts, piers, columns and stanchions square, rectanguar or polygonal for fair finished surfaces.
M&L for 10mm dia and over mild steel TMT bars, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed by Engr-in-charge.
-ditto- all as per item No 17 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M & L for errection & dismantling of MS tubler double scaffolding (H frame) upto height of 30m & with necessary brazing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carring out external face work of walls all as specified & directed.
M&L for 150mm thick PCC 1:2:4 type B-I using 20mm graded crushed stone aggregates as in floor finished cement concrete surface even and smooth using extra cement complete all as specified and directed by Engineer-in-Charge.
S&F Precast RCC (1:2:4) type BI using 20mm graded crushed stone aggregate as in cover slabs and set incement mortar 1:4, complete all as specified. (Note :- Reinforcement shall be measured and paid separately) all as specified and directed by EIC.
Cleaning of covered drains of sectional area exc 0.24 Sqm but n.exc 1 Sqm by using suitable device for removing blockage of line, mud, silt and other debris and removal of obtained spoils out of MD land, including taking precautionary and safety measures etc complete all as spcified and directed by Engineer-in-Charge.
Supply and fix rolled mild steel section of Grade FE 410-W, (Gde- E-250) quality-A, as in Plates (Plane or Chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete.
Supply and fix mild steel as in framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165
Supply and fix structural steel framed works using angle, channel etc. Confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with 1:2:4 type B0 (using 12.5mm graded stone aggregate) all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even without using extra cement all as specified and directed.
M&L for preparation of newly plastered surfaces of wall, applying two coats of Oil emulsion distemper over a coat of wall care putty of 2mm thick and alkali resistant primer all as specifed and directed.
M&L for complete removal of existing treatment on wall surfaces and applying a coat of wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bond distemper over a coat of wall primer all as specifed and directed.
M&L for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in ceiling, finishing the surface even smooth without using extra cement all as specified and directed.
M&L for preparation of newly plastered surfaces in ceiling, applying three coats of white wash all as specified and directed.
M&L for plastering in CM 1:4, 20mm thick in two coats (15mm under coat plus 5mm finishing coat) using Pidiproof LW+water proofing chemical of Dr. Fixit or equivalent as per manufacturer''s instruction and finishing the surface even and fair. (Note : Water proofing Chemical shall be measured and paid seperately)
M&L for preparation of newly plastered or un plastered wall surfaces, over 10cm width or girth applying two coats of 100% acrylic, weather resistant emulsion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction
M&L for complete removal of existing treatment on wall surface, over 10cm width or girth, preparation of surfaces, applying two coats of 100% acrylic, weather resistant emulson over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.
M&L for epoxy base joint filler paint on external surfaces of walls/floor to fill the cracks with and including resin and hardner in proportion as per manufacturers instructions complete all as specified and as directed. Make : Pidilite / Focrac / Chemistic or equivalent
M&L for applying thermoplastic paint in letter writing, Nos, Dashes, Arrow etc all as per manufacturer's instruction and all as specified and as directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth, applying two coats of synthetic enamel paint of approved colour over a coat of pink primer all as specified and directed.
M&L for preparation of old wooden surfaces of any description over 10 cm width or girth, applying a coat of synthetic enamel paint of approved colour all as specified and directed.
M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of old decorated steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Pragathi Infrastructure Co.
ROHIT CONSTRUCTION
georson constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .