8470 REPAIRS TO PATH, DRAIN, FENCING, COMPOUND WALL IN CERTAIN AREA OF AGE B/R-II UNDER GE (CENTRAL) PUNE

Amount

Demolition of cement concrete in ground floor and paving not exc 15cm thick (above or below ground) and rubbish off the premises out side of defence land complete all as directed.

M & L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and as directed..

M & L for precast coloured, chequered cement concrete tiles, glossy finish of size 300 x 300mm x 20mm thick, conforming to IS-1237 (2006) with mixture white cement and pigment, set, jointed and pointed in neat cement slurry in floors in coloured cement to match including screed bed 15mm thick in CM (1:6) complete all as specified and directed.

Dismantling posts or struts (Wood, Steel or RCC) of any section embedded in concrete, brick work etc. including taking out embedded portion and making good disturbed ground complete all as directed.

Dismantling of fencing wire mesh any type complete all as directed.

M & L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and as directed.

S & F mild steel work in Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

S & F Mild steel flat 40 x 5mm as in band , strap , supports or stay for securing chain link fencing to angle iron post and welded to post during embedding in PCC complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, neck dia 11 to 15mm , each screwed end to be fitted with washers and one hexagonal or square nut not exc 5cm long complete all as specified and as directed.

Supply only Chain link MS galvanised fencing of mesh size 50 x 50mm and 4mm dia of wire complete all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire complete all as directed.

S & F in repairs galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etccomplete all as specified and as directed. (Note : Each line of wire to be measured.)

M & L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) grade D-5 and setting in CM 1:6 including dismantling of brick or stone / boulders masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.

M & L for plain cement concrete 1:2:4, type B-1 using 20mm graded stone aggregate as in coping / bearing course with including use & waste of form work etc complete all as specified and as directed .

M & L for rendering 15mm thick in CM 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement including complete all as specified and directed.

M & L Rendering 15mm thick in CM 1:4 on fair faces of brick work or stone masonry surfaces finished the surface even and smooth with a thin layer of sagol finish including taking down cement plaster or cement lime plaster including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete complete all as specified and as directed.

M & L precast cement concrete 1:2:4, type B-1 using 20 mm graded aggregate, in cover slabs (for man holes / drains etc) and similar articles with plain faces etc set in CM 1:4 including demolition of existing precast concrete cover slab complete all as specified and as directed.

M & L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia orsecuring with clips complete all as specified and as directed.

Dismantling structaral steel work as in cluding door, gates but excluding framed truss etc complete all as directed.

S & F Framed work such as in gates incliding pintel hinges , stop, hand made sliding door bolts etc with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con-forming to Fe 290.Gde-E-165 complete all as specified and as directed.

M & L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide or zink chrome primer complete all as specified and as directed.

SAI TILES ARTS

GS Associates

R K Construction

Suma Construction

shiva traders

SUJATA CONSTRUCTION

M/s Asrani and sons