CA NO GE(W)/HSR-14/2025-26 SPL REPAIR TO BLDG NO P-673 (OR SINGLE LIVING ACCN) AND PROVN OF GEYSERS AT HISAR MIL STN UNDER GE (WEST) HISAR

Amount

Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each complete all as specified and directed.

Taking down shutters of any description area exc 1.0 sqm but n exc 2.0 Sqm complete all as specified and directed.

S&F pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats complete all as specified and directed.

S&F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats complete all as specified and directed.

S&F flush shutter 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred grade for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) in 2nd class hard wood complete all as specified and directed.

M&L preparation of new wooden surface of any description and applying two coats of synthetic enamel paint over one coat of pink primer, over 10cm width or girth complete all as specified and directed.

M&L preparation of old wooden surfaces of any description and applying a coat of synthetic enamel paint over 10cm width or girth complete all as specified and directed.

S&F,MS framed work such as grill grating, framed Guard bars, barred iron doors,ladders, frame work for securing water tank,cooler stand and similar work conformed to Fe-410 or 310-0 complete all as specified and directed.

M&L for preparation of new untreated steel or iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel or iron surfaces of any description and applying a coat of synthetic enamel paint complete all as specified and directed.

S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in Repairs for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Providing and fixing 30mm thick factory made 100% solid WPC (wood polymer composite) solid plain/prelam/enrouted plain/enrouted painted flush door shutter of required size comprising of virgin PVC resin of K value 57-60(suspension grade) calclum carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives made from Extrusion process WPC foam sheet single extruded (inner) with density not less than 650 kg/cbm manufacture by an ISO 9001-2015 certificate company, having good screw holding capcity (screw withdrawl strength of 2000 n (face) and 1100 N (edge) minimum copmressive strength of 50 n/mm2, Modulus of elasticity 850/N/mm2 and resistance of spread flame of class A category with property of being termite/borer free, water/moisture proof, fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws for WC/bathroom/toilet/Kitchen/Balcony doors complete all as specified and directed.

Providing & fixing double rebate ventilators fabricated from roll framed sections made of galvanised steel color coated / powder coated (base steel as per IS 513 "D" quality galvanised as per IS 277 with Zinc of 120 gms /Sqm) with total coated thickness of 0.60 mm complete all as specified and directed. Paint Specification : coated section should be with primer coat of epoxy primer of 5-7 micron thick , finish painted with polyester paint of 12-16 micron thick or powder coated with pure polyester up to 50 -60 micron thick. Dimension of Sections:sections for frame should be of 72 x 55 mm , section for mullions should be of 72 mm x 50 mm ,section for shutter frame should be of 47mm x 20 mm ,section for fixed glass bead should be of 12mm x 12 mm ,and section for fly mesh should be of 40 mm x 20 mm Fixing Details: section for frame glazed shutter and wire mesh shutter should be cut to length and miter jointed with poly propylene corner brackets , mullion section should be joined with frame / mullion using mullion cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and fixed glass spoon Profile should be used around Fly mesh to fix mesh in mesh shutter. Accesories:- Each Glazed shutter and mesh shutter should be provided with SS Pivot Hinges -1 set ,seccolor Handles &seccolor Stay, Window Frame Should be Fixed to Brick/ Concrete masonary by using Nylon self Expanding Caps and driving MS electroplated 80 mm long screws into the caps through frame. solid square guard bars shall be provided between glazed shutter and mesh shutter and the same shall be measured and paid separately the above said rates are inclusive of 5mm thick plain float glass ,SS wire mesh , 10mm square guard bar with primer and two coat of synthetic enamel paint as fitted by company Note:- if one ventilation has two or more sub partitions then half or more than half of the ventilators shall be double rebated openable and remaining shall be fixed type and all as spd and directed as per ground requirement .

Providing & fixing double rebate openable windows fabricated from roll framed sections made of galvanised steel color coated / powder coated (base steel as per IS 513 "D" quality galvanised as per IS 277 wit Zinc of 120 gms /Sqm )with total coated thickness of 0.60 mm complete all as specified and directed. Paint Specification : coated section should be with primer coat of epoxy primer of 5-7 micron thick , finish painted with polyester paint of 12-16 micron thick or powder coated with pure polyester up to 50 -60 micron thick. Dimension of Sections:sections for frame should be of 72 x 55 mm , section for mullions should be of 72 mm x 50 mm ,section for shutter frame should be of 47mm x 20 mm ,section for fixed glass bead should be of 12mm x 12 mm ,and section for fly mesh should be of 40 mm x 20 mm Fixing Details: section for frame glazed shutter and wire mesh shutter should be cut to length and miter jointed with poly propylene corner brackets , mullion section shoulb be joined with frame / mullion using mullion cap Ethyl Propylene Danien Monomer (EPDM) Gasket should be used all around glass in shutter and fixed glass spoon Profile should be used around Fly mesh to fix mesh in mesh shutter. Accesories:- Each Glazed shutter and mesh shutter should be provided with SS Pivot Hinges -1 set ,sector Handles &seccolor Stay Window Frame Should be Fixed to Brick/ Concrete masonary by using Nylon self Expanding Caps and driving MS electroplated 80 mm long screws into the caps through frame. solid square guard bars shall be provided between glazed shutter and mesh shutter and the same shall be measured and paid separately. The above said rates are inclusive of 5mm thick plain float glass &SS wire mesh.

Providing and fixing factory made 100% solid WPC (wood polymer composite)- door frame of size 75mmx50mm made from wood polymer composite (single extruded process) material comprising of virgin PVC polymer of K value 57-60(suspensive Grade), calcium carbonate and natural fibers (wood powder/rice Husk/wheat husk) and non toxic additivies fabricated with meter joints after applying PVC solvent cement & screwed with full body threaded star headed screws having minium frame density of 780Kg/cbm manufacture by and ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawel strength of (Min 990N/mm, minimum copressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof & fire retardent & fixed in position with SS draft fasteners/hold fast of required dia and length for WC/Bathroom /Toilet and external uses complete all as specified and directed.

S&F for 1mm thick factory made pressed steel shutter fixed with 1mm thick pressed steel frame of 105 x 60mm outer frame and as reqd for cupboards (consisting two shutters) and including 06 Nos hinges of size 100mm long and Godrej pattern three way locking system with suitable shape & size 12mm dia MS rod & 01 Nos chromium plated handle of size 150mm long with & including two coats of shop spray synthetic enamel painting over a coat of red oxide primer as colour approved by GE complete all as specified and directed. Note : 1 Cupboards frame to be fixed with 06 Nos nuts & bolts of dia 12mm & 150mm long at vertical outer edge of cupboards brick wall / concrete surface including making good the distrubed surfaces complete all as specified and directed. 2 Front elevation shall only be measured for payment purpose 3 the contractor shall provided the seperate locking system for cupboard of each individuals in Barrack ,the above quoted rates shall be inclusive of this.

S&F 100 mm extruded aluminium alloy handles ,fabricated type complete all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section 100mm long complete all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F in Repair fancy type stainless steel grade-304 Curtain Rod 25mm dia including SS bracket, SS Fancy knobs etc complete all as specified and directed.

S&F for 50 mm long floor door stopper of aluminium alloy body and ongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 200mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate in repair complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed.

M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular) of size 600mm x 1200 mm in floors etc set & jointed in neat cement slurry and flush pointed with white or coloured Epoxy to match, including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Description all as per item No 29.00 above but in skirting over and including 10mm thick cement plaster 1:4 complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) tiles oof size 400 x 400 mm in floors, over and including 15 mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed flush with white or coloured Epoxy to match complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300 x 600 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush with white or coloured Epoxy to match ,over and including 10mm thick baking coat in CM 1:3 complete all as specified and directed.

Demolition of cement concrete in floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed.

Supply only liquid type water proofing compound complete all as specified and directed.

Treatment of sunken floor slab compraises of the following specifications complete all as specified and directed :- (i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout. (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg beg of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out (fixing of nozzle and grouting & WPC will be measured and paid separately). (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. (vi) GI pipe 50mm dia medium grade 50cm long laid on each sunken floor as spout complete all as specified and direced by EIC. (vii) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with liquid water proofing compound @ 200ml per 50 Kg beg of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. (WPC shall be measured and paid separately) (viii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 type C-1 all round after painting with anticorrosive paint. Note :- (i) Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is included in the rates quoted above. (ii) All debries obtained from site will be thrown away out side MD land by contractor at his own expense. (iii) For payment purpose the plan area of sunken floor shall be taken into accounts.

M&L cement concrete 1:3:6 type C2 using 20 mm graded stone aggregate as in plinth protection, 75 mm thick, finished even and smooth without using extra cement, incl making joints 12 mm wide to the full depth of PCC at every 3 mtrs and at every change of direction and filling the same with and incl bitumen and sand 1:3 by weight complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair face of brick walls/ concrete surfaces and finished even and fair complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair face of brick walls / concrete surfaces external surfaces of any description mixed with WPC @ 200ml per 50 Kg bag of cement used and finished even and smooth w/o using extra cement complete all as specified and directed. Note : WPC will be measured and paid separately.

M&L 10mm thick rendering in CM (1:3) on concrete surfaces of ceiling complete all as specified and directed.

M & L for preparation of newly plastered surface of wall and applying two coats of OBD over one coat of 2mm thick wall care putty on wall complete all as specified and directed.

M & L for complete removal of existing treatment of old surface of wall and applying two coats of OBD over a coat of 2mm thick wall care putty on wall complete all as specified and directed.

M&L for preparation newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old surfaces of wall and applying two coats of white wash complete all as specified and directed.

M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparing new plastered or unplastered surface of walls and applying two coats of weather proof paint over a coat of paint base primer of same make complete all as specified and directed.

M&L for preparing old plastered or unplastered surface of walls and applying two coats of weather proof paint over a coat of paint base primer of same make with and including complete removal of existing treatment of any layer of wall complete all as specified and directed.

S&F Vitreus china wash down water closet pan (Padestal pattern )while excluding fixing bolt,flushing cistern , flushing pipe and inclusive of plastic water closet seat cover and mild steel chromium plated or aluminised hinging device and jet spray complete all as specified and directed.

S&F in repair ,PVC Low Level cistern 10 liter capacity ,valveless,syphonic action type with float ,handle ,incl 32mm dia pipe of polyethylene of low or high density or PVC & bracket complete all as specified and directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440mm, white with integral foot rest including PVC 'P' or 'S' trap and connection to trap includintg cement concrete, with PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets and including flush pipe of polyethylene or low or high density or PVC 32mm dia, for low level cistern etc. including making good to floor, complete all as specified and directed.

S&F in repair Vitreous China Urinal, Half Stall type complete including providing and fixing Plugs,Bedding urinal against wall in cement mortar 1:2 securing urinal t oplugs with and including 60 mm long brass screws , pointing around urinal back in cement , fixing automatic flushing cistern with brackes flush pipe , grating and union for discharge pipe (exclusive of fixing suppply pipe to flushing cistern , trap , waste pipe complete all as specified and directed.

S&F Vitreous China Urinal partition white of Size 310 x 700 mm in repairs and complete all as specified and directed.

Taking down eaves gutter or RWP of any description complete all as specified and directed.

S&F, 110mm dia PVC rain water pipe single socketed with rubber joint, jointed with solvent joint fixed to wall complete all as specified and directed.

S&F, 110mm dia PVC bend of any radius including benching in Cement concrete 1:3:6 where required and finishing complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to floors with necessary MS clamps complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.

S&F 110 mm PVC (SWR) access door/ without door bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) access door./ without door bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) junction single,(Single T / cross T ) equal or unequal provided with access door complete all as specified and directed.

S&F 75mm PVC (SWR) junction single,(Single T / cross T ) equal or unequal provided with access door complete all as specified and directed.

S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed.

S&F, PVC Nahani trap 75mm bore with grating including jointing with solvent cement fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S & SS Peg Set of 6 , Solid Body, 200 mm to 300 mm length complete all as specified and directed.

S/F in repair brass chromium plated waste coupling 32mm dia complete all as specified and directed.

S&F in repair PVC connection 15mm dia, 600mm long complete all as specified and directed.

S/F in repair PVC waste pipe for 32 mm dia of standard length complete all as specified and directed.

S&F in repair 15 mm dia CP Angle Cock, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed.

M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade with concealed including taking down of existing pipe line complete all as specified and directed.

M&L for GI tubing 20mm bore fixed to walls, ceilings or laid in floors medium grade with concealed including taking down of existing pipe line complete all as specified and directed.

S&F in repairs 15mm bore CP Bib taps Long Body Half turn/Quarter turn , cast copper alloy fancy type chromium plated and fixed complete all as specified and directed.

S&F in repair 15 mm dia CP Conceled Stop Cock, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.

S&F Rotational Moulded polyethylene Water Storage Tanks Three layers in white colour (cylindrical vertical with closed top) 1000 ltrs capacity hoisted and fixed in posn all as specified incl Dismantling/ Demolition of existing tank of any type complete all as specified and directed.

S&F ,20mm bore ball brass valve, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Dismantling of brick tiles in single layer on roof (laid dry and pointed) and complete all as specified and directed.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and removing debris to MD land upto total distance 1.5 Km complete all as specified and directed.

M&L Cement concrete 1:2:4 mix type B1 (20 mm graded stone aggregates) in padding of reqd thickness in slope over roof complete all as specified and directed.

M&L Screed Bed or Bedding layer of mortar 15 mm thick in cement mortar 1:3 with WPC on roof surfaces complete all as specified and directed. Note : WPC will be measured and paid separatly.

M&L for applying roof treatment on top of roof with granular surfacing APP modified membrane (minimum 3mm thick) weighing not less than 3 Kg per Sqm, consisting of 90 micron center core HMHDPE (High molecular high density polyethylence) laid by torch application method of overlap 100 on length and 100mm on the width side as per manufacture's instructions over a coat of hot air blown grade bitumen 85/25 @ 1.20Kg/Sqm over a coat of approved cold applied bituminous oil based primer (IS-3384) @ 300 gm/sqm complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for Brick work with sub Class B bricks , old size straight or curved in plan exceeding 6mtr mean radius with old size bricks in cement mortar 1:6 complete all as specified and directed.

M & L for Brick work with Sub Class B bricks, old size, straight or curved on plan to any in half brick thick walls , built in cement mortar 1:4 complete all as specified and directed.

M&L for coloured Chequered cement concrete tiles 30 cm x 30 cm x 25mm thick, set jointed and in grey cement and pointed with pigment over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 100 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed.

M&L Pre-cast cement concrete Type B1 1:2:4 (20 mm graded aggregate ) kerb Stone ,setting in CM 1:4 including demolition of old kerb stone complete all as specified and directed.

M&L preparation of new concrete surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base complete all as specified and directed.

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware AC or RCc) set in cement mortar 150 mm dia complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate for concrete bed to drain pipes including forming cradles for 150mm dia pipe complete all as specified and directed.

S & F RCC Class NP 2, 150 mm bore pipes laid and jointed complete with collars complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation/ filling/ mass concrete complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Removing all disintegrated and loose concrete of any thickness including plaster if any in RCC Column, Chajja, beams, lintels etc, removing all loose rust / scale from exposed reinforcement bars by using wire brushes and sand paper including cleaning of exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical (make : Pidilite) and tied reinforcement bars / IRC fabric 50mm x 50mm x 12gauge if reqd to reinforcement concrete bonding primer uniformly to exposed surfaces and applying cement mortar 1:3:1 with MPC (1 Part cement : 3 Part Sand : 1 Part 6mm coarse aggregate) to an average thickness not less than 20 mm and removing debris outside MD land complete all as specified and directed. Note : The cost of IRC 50mm x 50mm x 12 gauge or reinforcement bars shall be measured and paid separately.

Removing all disintegrated and loose concrete of any thickness including plaster if any in roof slab, removing all loose rust / scale from exposed reinforcement bars by using wire brushes and sand paper including cleaning of exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical (make : Pidilite) and tied reinforcement bars / IRC fabric 50mm x 50mm x 12gauge if reqd to reinforcement concrete bonding primer uniformly to exposed surfaces and applying cement mortar 1:3:1 with MPC (1 Part cement : 3 Part Sand : 1 Part 6mm coarse aggregate) to an average thickness not less than 20 mm and removing debris outside MD land complete all as specified and directed. Note : The cost of IRC 50mm x 50mm x 12 gauge or reinforcement bars shall be measured and paid separately.

Supply only IRC 50mm x 50mm x 12 gauge weld mesh cut to length bend to shap required and tying with and including annealed mild steel wire not less than 0.9mm or fixing with galvanised steel staples fixed to steel members with nut and bolt or fixed to RCC work or ceiling surfaces complete all as specified and directed.

S&F TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed.

Description all as per item No 103.00 above but 8mm dia and over up to 10mm dia in stirrrups, spaeers and binders etc complete all as specified and directed.

Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, RCC water Tanks ,landing, chajjas and similar suspended work and making good the disturbed area in CM 1:3 complete all as specified and directed.

S&F mild steel joist ,channel ,angle ,tee fixed independently without connection plates etc (cut to ordinary length i.e. within 20mm of the length indicated ) as in frame for sheeting in chajjah complete all as specified and directed.

S&F prepainted galvalume alumimium zinc coating GI based plain steel sheet 0.50 mm thick of any color having tensile strength of 550 MPA as a roof covering /Cladding to wall and in Chajjah , Fixed with self tapping screw complete all as specified and directed.

S&F Stainless steel (grade 304) railing made of Hollow tubes, channels,plates etc ,including welding grinding, buffing ,polishing and making curvature (wherever require) and fitting the same with necessary stainless steel nuts and bolts complete ,Including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steels bolts etc of required size, on top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer in charge (for payment purpose only weight of stainless steel member shall be considered excluding fixing accesories such as nut , bolts, fastener etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L 18-20 mm thick Black Granite (of any type) work (table rubbed and polished) in steps, staircase treads and risers,landind area jambs, pillars, window-cills, cooking plateform, and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rouding of edges complete all as specified and directed.

Providing and applying of 10mm thick hand applied Sika Monotop 122F single component, dual srinkage compensated thixotropic high strength formulation trawlable mortar on the brick wall including pointing of brick joint over a bond coat of sika latex (1:4:6) water cement and sika latex consumption @ 100 gm/sqm on the wall surfaces. the PMM should have compressive strength > 45 MPa in 28 days as per ASTM C 109 (7 cm cube) incl proper cleaning of grroves complete all as specified and as directed.

M&L for providing and fixing 12-16mm dia injection ports non returnable nozzle by drilling, cleaning and sealing holes 50-75 mm deep with fast setting high strength Epoxy putty, solvent free, three component compound based on epoxy resins, graded fillers and thixotropic agents as approved by GE as in beams, columns, slab and parapets as per the technical specifications and manufacturer's instructions complete all as specified and directed.

Supply and apply of 3 parts, very low viscous elastic polyacrylic injection resin Sika @ Injection 306 with a versatile and adjustable reaction time having mixed viscosity: 3-11 M pa s at + 20 degree C, reaction time: adjustable according to ambient temperature and execution requirement between 8-50 Mins PH - 9-10. Tested as per wissbau No 2002- 094- (1A) function test with re- injectable hose system. The holes should be drilled until a depth of approx. 5 cm (for a 6cm thick wall) before the end of the wall is reached. Pump Sika @ injection- 306@ at > 20 bar into a behind fissures or into masonry joint which are allowing water to infiltrate into unwanted area if voids is masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout when movement stop or Sika @ injection - 306 appears at the next packer move to the next packer and inject. If the dampness is heavy inject similarly at next joint line complete all as specified and directed.

Making the grooves 10mmx10mm above coating area and fill with SIKAFLEX 127, single component, elastic, moisture curing, hybrid polyurethane based construction sealent and adhesive complete all as specified and as directed.

Supply and Apply a pre Batched one component polymer modified cementitious patch repair mortar(monotop) for a thickness of 15-20 mm or complete all as specified and directed.

Taking down carefully copper/ Aluminium point wiring ( light, fans, socket, power socket) complete including taking out existing unserviceable terminal boxes and conduit with swithces/sockets/fan regulators and fittings such as ceiling roses, pendants, tube lights fittings lamp holders, brackets light fittings, rectangular blocks DB MCCB etc and making good disturbed surface of wall/ floor etc to match with the existing the surface etc complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multistranded copper conductor for one light/fan/bell point in and including PVC rigid non metallic concealed conduit 19/20 mm dia medium duty, ISI marked to be terminated & including pressed modular steel boxes & cover plate of module as required on site.including 1.5 sqmm (22/.3mm) PVC insulated and unsheathed FRLS single core multisrtaned copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in Cm 1:3 and finishing the surface as per exisitng treatment complete all as specified and directed.

Description all as per item No 117.00 (here-in-before) but One three pin 5 Amp socket outlet point on indep board controlled by one nos, one way switch on independend board complete all as specified and directed.

Description all as per item No 117.00 (here-in-before) but One three pin 5 Amp socket outlet point on same board controlled by one nos, one way switch on same board complete all as specified and directed.

Description all as per item No 117.00 above but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independend board complete all as specified and directed.

S&F Modular switch 1 way 6A 1 module Single pole, one way, 230 volts independend board independend board complete all as specified and directed.

S&F Modular switch 1 way 16A 1 module independend board independend board complete all as specified and directed.

S&F Modular socket 6A -2/3 pin combined 2 module type 230 volts AC complete all as specified and directed.

S&F Modular socket 6A/16A -2/3 pin combined 2 module type AC complete all as specified and directed.

S&F Modular lamp holder, insulated body with back plate suitable for batten fittings and complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size independend board complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F modular fan step regulator 120W-2 module suiatable for 1200/1400 mm sweep ceiling fan etc complete all as specified and directed.

S & F for wall mounted LED tube light fitting 20 watts batten not less than 120 lumen/watt for surface mounted, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

S&F Sheet metal enclosure distribution board SPN,8 way, single door powder coated, protection class IP-42 suitable for mounting MCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar complete all as specified and directed.

Supply and fixing in repair MCBs SP 6 to 40Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

Supply and fixing in repair MCBs SPN 40 Amps, 240 volts, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCB should be the same as that of DB

S&F Sheet metal enclosure distribution board TPN,4 way, double door powder coated, protection class IP-54, isolated neutral bar, mechanical impact strength IK 09 suitable for mounting MCB & /MCCB DBs confirrming to IS-13032, IS-8632,BS5484 with min 200 Amp raiting copper bus bar and grouting, fixing on wall with nut bolts wasshers proper with pcc works complete all as specified and directed.

Supply and fixing TPN 63 Amps, 415 volts, 16 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) complete all as specified and directed. Note : Make of the MCCB should be the same as that of DB

S & F in repair for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source not less than 120 lumen/watt and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements and provision of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including 40 mm dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed.

Taking down old unserviceable submain wiring including fitting & fixtures and making good of the surface to match with the existing complete all as specified and directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable for phase, one run of 6 sqmm cable for earthing and one run of PVC conduit will be measured as one unit.

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion complete all as specified and directed. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

Supply and Fixing electric water heater storage type steel body with copper inner tank and heating element upto 2KW capacity 25 Liter, BEE 5 Star rated complete with all accessories such as safety valve, Thermostats, NRV, PVC connection piece etc complete all as specified and directed.

M&L for Point wiring with 4 Sqmm, single core, PVC insulated but unsheathed, FRLS cable, 1100 volts grade IS-694 marked, with multistandard copper conductors and earth continuity wire with similar 4 Sqmm cable (including connecting to earth dolly) drawn through and including rigid PVC conduit and conduit accessories/fittings, fixed/ laid in concealed in walls and surface on ceilings (including cutting chases in wall) and also including sunk in type pressed steel terminal box and 3 mm thick plastic laminated sheet complete all as specified and directed.

Supply & Fixing sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one SP MCB of 20 Amp rating 240 volt complete all as specified and directed.

OM CONSTRUCTION CO. (BID ID -3362420)

VIKAS INFRASTRUCTURE (BID ID -3361630)

malik constructions (BID ID -3354200)

M/s Rao Constructions, 1173 Urban Estate-II, Hisar (BID ID -3353146)

Balaji Construction Co. (BID ID -3362220)