Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹52.5 LAccepted-AOC 33 MAHAVEER NAGAR NANDRI ROAD PO SARAN NAGAR JODHPUR 342015 | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L1 | Accepted-AOC LOWEST REASONABLE BID | |
| 2 | L2₹61.6 L+₹6.7 L (12.2%)Rejected-Finance MARYADA 111 SHIKARGARH KANHAIYA NAGAR JODHPUR 342001 | JODHPUR | RAJASTHAN | 342001 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | Rejected-Technical | - | Rejected-Technical Not Recommended as not satisfies eligibility criteria as per NIT being two class below |
Tender Value
₹55.8 L
EMD Value
₹1.1 L
Closing Date
12 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE ARMY JODHPUR
CWE ARMY MULTAN LINES ARMY AREA JODHPUR
SPL REPAIR TO MD ACCN BLDG NO 1074 QTR 1 TO 12 AT AJMER LINE IN ARMY AREA JODHPUR UNDER GE ARMY CENTRAL
2022_MES_535081_1
82223/19/E8
Open Tender
Civil Works
Item Rate
180 days
JODHPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE ARMY CENTRAL
₹1.1 L
5 Nov 2022
1 Jul 2022
13 Aug 2022
1 Jul 2022
12 Aug 2022
22 Jul 2022
Amount
Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level), complete all as specified & as directed by Engg.-in-charge.
M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring, path, sub base & foundation, complete all as specified & as directed by Engg.-in-charge.
M&L 50 mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in plinth protection or similar places, without using extra cement, complete all as specified & as directed by Engg.-in-charge.
M&L machine pressed precast concrete interlocking paver block of 60mm thick with 6mm top layers of anti abrasive rubberrised material, confirming to IS 15658-2006,M-35 Grade, interlocking joints shall be filled with fine sand, over and including sand cushioning of 25mm thick complete all as specified and as directed by Engg.-in-charge.
S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (20mm stone agg) all as directed by Engr-in-Charge.
Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified & as directed by Engg.-in-charge.
M&L for cutting in to old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6, complete all as specified & as directed by Engg.-in-charge.
M&L for squared rubble walling, Jodhpur type, regular coursed, well bonded, bedded and solidly hearted built in cement mortar 1:6, complete all as specified & as directed by Engg.-in-charge.
All as per item No 8 here-in-above but except stone.
M & L pre-cast cement concrete block masonry using PCC, 1:2:4, type B-1 solid blocks, not exceeding 10 cm in width and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius, complete all as specified & as directed by Engg.-in-charge.
Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete to squared rubble walling, regular coursed, Jodhpur type, complete all as specified & as directed by Engg.-in-charge.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified & as directed by Engg.-in-charge.
M&L for 25 mm thick cement concrete 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) as in base / flooring, complete all as specified & as directed by Engg.-in-charge.
M&L for 15mm thick screed bed or bedding layer in CM 1:6 floor finished even & rough to recieve tiling/floor finish, complete all as specified and directed.
M&L non skid ceramic tiles, coloured, of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including 15mm thick backing coat in CM 1:6, complete all as specified & as directed by Engg.-in-charge.
All as per item No. 15 here-in-above, but as in skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified & as directed by Engg.-in-charge.
M&L Joint free non skid ceramic tiles, coloured, of size exceeding 0.11 Sq.m and not exceeding 0.18 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, complete all as specified & as directed by Engg.-in-charge.
M&L Joint free glazed coloured ceramic tiles of size 300mm x 450mm x 7mm thick on vertical surface such as dado/ skirting etc., and jointed in neat cement slurry and pointed in white cement / coloured cement to match the shades of tiles including provision of highlighter pattern, complete all as specified and as directed by Engg-in-charge.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified & as directed by Engg.-in-charge.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed, complete all as specified & as directed by Engg.-in-charge.
M&L 18 to 20mm thick machine cut kota stone slab, as in flooring, cooking plateform & etc., laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish over and including 15 mm thick screed bed in cement mortor 1:6, complete all as specified & as directed by Engg.-in-charge.
M&L 18 to 20mm thick machine cut kota stone slab, as in riser of steps, skirting, dado and pillar & etc., laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish over and including 10 mm thick screed bed in cement mortor 1:4, complete all as specified & as directed by Engg.-in-charge.
M&L 18 to 20mm thick machine cut kota stone slab, as in shelves and other similar places & etc., laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish including proper fixing arrangement in existing surfaces/new surfaces and making good disturbed surfaces, complete all as specified & as directed by Engg.-in-charge.
M & L 18 to 20 mm thick machine cut one side polished black granite, as in kitchen plate form, set and jointed including 20 mm thick screed bed in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing, including making round edges of slabs ( Half round] and polishing of Granite of edges, with moulding & smooth finish with round edge, complete all as specified & as directed by Engg.-in-charge.
Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified & as directed by Engg.-in-charge.
M&L for 10mm thick backing coat in CM 1:4 over stone masonary surfaces incl finishing the surface even & rough to recieve tiling etcc, complete all as specified & as directed by Engg.-in-charge.
M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smoothc, complete all as specified & as directed by Engg.-in-charge.
M&L in repair 5 mm thick rendering in CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc, finished even & smoothc, complete all as specified & as directed by Engg.-in-charge.
M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface, complete all as specified & as directed by Engg.-in-charge.
Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar, complete all as specified & as directed by Engg.-in-charge.
M&L for Keyed pointing in CM 1:3 to square rubble masonry, Jodhpur type, regular course, complete all as specified & as directed by Engg.-in-charge.
M&L preperartion of newly plastered surfaces on wall and applying two coat of oil bound distemper over and including single coat of wall care putty, with fair finished and even surface, complete all as specified & as directed by Engg.-in-charge.
Complete removal of existing treatment of any description on walls and applying with wall care putty including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper white shade or other approved shade, over & including two coat of birla white putty on plastered surface, complete all as specified & as directed by Engg.-in-charge.
M & L three coats of white wash on newly plastered surface of wall including preparation of serfaces, complete all as specified & as directed by Engg.-in-charge.
M & L three coats of white wash on newly plastered surface of ceiling including preparation of serfaces, complete all as specified & as directed by Engg.-in-charge.
M & L one coat of white wash on old painted surface of wall , complete all as specified & as directed by Engg.-in-charge.
M & L one coat of white wash on old painted surface of ceiling, complete all as specified & as directed by Engg.-in-charge.
M&L preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement as primer, complete all as specified & as directed by Engg.-in-charge.
Preparation of old painted surfaces of walls by brooming down or steel wire brushing, scraping down smoke spot, moulds, moss and efflorescent salt and greasy spots and applying one coat of cement base paint, complete all as specified & as directed by Engg.-in-charge.
Preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer, complete all as specified & as directed by Engg.-in-charge.
Preparation of new or previously untreated steel surface of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer , complete all as specified & as directed by Engg.-in-charge.
Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame, complete all as specified & as directed by Engg.-in-charge.
Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified & as directed by Engg.-in-charge.
Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm each, complete all as specified & as directed by Engg.-in-charge.
Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm, re-fixing in the same opening after necessary repair like easing etc., complete all as specified & as directed by Engg.-in-charge.
M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors and frame ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified & as directed by Engg.-in-charge.
M & L for mild steel framed work as in brackets etc for cooler stands etc framed steps/stairs etc complete using MS angle iron, Steel bars, gusset plate etc, complete all as specified & as directed by Engg.-in-charge.
S&F mild steel frame work as in stairs, hand rails, half round or other stock section or section or core for wooden hand rail straight portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hip ties for foof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling bolting or riveting etc and similar work confirming to Fe 410-0 or fe 310-0, complete all as specified & as directed by Engg.-in-charge.
M &L as in repairs for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape, including two coats of synthetic enamel paint over & including a coat of red- oxide, zinc chrome primer on internal surfaces & two coats of hammer tone finish over & including a coat of red- oxide, zinc chrome primer on external surfaces, alongwith locking arrangement mortice lock handle etc, complete all as specified & as directed by Engg.-in-charge.
S&F of 35mm thick, IInd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, including SS wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40mm fixed with SS wire staple and Aluminium Grill Medium grade mess size 50x50mm , fixed at outer edge at outer edge of door and including primer, complete all as specified & as directed by Engg.-in-charge.
S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides salmaica, complete all as specified & as directed by Engg.-in-charge.
S/F of 35mm thick factory made partly glazed and partly skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc , complete all as specified & as directed by Engg.-in-charge.
S/F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail, MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified & as directed by Engg.-in-charge.
M/L for solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube, complete all as specified & as directed by Engg.-in-charge.
Taking down steel window/ventilator, complete all as specified & as directed by Engg.-in-charge.
Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer, (with or without cooler opening as directed by engr-in-charge), complete all as specified & as directed by Engg.-in-charge.
Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer (with or without cooler opening as directed by engr-in-charge), complete all as specified & as directed by Engg.-in-charge.
Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer, complete all as specified & as directed by Engg.-in-charge.
Factory made box type steel ventilator without glazing bars dovetailed or welded and with one shop coat of zinc chromate prime, complete all as specified & as directed by Engg.-in-charge.
S/F of aluminium anodized,tower bolt 200 mm long, complete all as specified & as directed by Engg.-in-charge.
S&F aluminum anodised handle extruded section of size 150mm long, complete all as specified & as directed by Engg.-in-charge.
S/F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long , complete all as specified & as directed by Engg.-in-charge.
S &F of stainless steel butt hinges 100 mm size, complete all as specified & as directed by Engg.-in-charge.
S &F of mild steel butt hinges 100 mm size, complete all as specified & as directed by Engg.-in-charge.
S&F 100mm size single action door spring hinge, complete all as specified & as directed by Engg.-in-charge.
S & F floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 140mm long complete all as specified and directed.
S/F of 4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty, complete all as specified & as directed by Engg.-in-charge.
S/F for 3 mm thick plain glass ordinary quality & glazing , complete all as specified & as directed by Engg.-in-charge.
S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm, complete all as specified & as directed by Engg.-in-charge.
S&F in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface, complete all as specified & as directed by Engg.-in-charge.
M/L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold fast iron fixing,coping, chamfered edges including necessary form work, complete all as specified & as directed by Engg.-in-charge.
S&F flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding and necessary item, complete all as specified & as directed by Engg.-in-charge.
S&F MS with PVC coated decorative 25mm curtain rod with fixing brackets, knob etc as in repairs, complete all as specified & as directed by Engg.-in-charge.
S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms), complete all as specified & as directed by Engg.-in-charge.
S&F in repair soap dish of PTMT fixed with screws, complete all as specified & as directed by Engg.-in-charge.
S&F in repair PTMT towel rail 450mm long fixed to wall with chromium plated brass screws and wooden cleats, min weight 170gms approved make complete all as spcified and directed.
S&F in repair MS chromium plated peg set of five fixing with wall, complete all as specified & as directed by Engg.-in-charge.
S & F in repair stainless steel sink with drainage board made of 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified & as directed by Engg.-in-charge.
S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc, complete all as specified & as directed by Engg.-in-charge.
S & F as in repairs vitreous china wash down water closet Anglo Indian type pedestal pattern with seat & cover complete incl fixing of flush pipe etc, complete all as specified & as directed by Engg.-in-charge.
S & F in repair Vitrous china wash basin as in repairs, white flat back size 450x300 mm including , waste pipe, MS brackets, complete all as specified & as directed by Engg.-in-charge.
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore, complete all as specified & as directed by Engg.-in-charge.
Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore, complete all as specified & as directed by Engg.-in-charge.
S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor, complete all as specified & as directed by Engg.-in-charge.
S&F 75 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor, complete all as specified & as directed by Engg.-in-charge.
S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall, complete all as specified & as directed by Engg.-in-charge.
S&F 75 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed , complete all as specified & as directed by Engg.-in-charge.
S&F100 mm CI branch pieces single socketed Y equal or unequal, complete all as specified & as directed by Engg.-in-charge.
S&F 75 mm CI branch pieces single socketed Y equal or unequal, complete all as specified & as directed by Engg.-in-charge.
S&F100mm CI bends any radius, complete all as specified & as directed by Engg.-in-charge.
S&F 75 mm dia CI bend with oval acess door fixed to pipe , complete all as specified & as directed by Engg.-in-charge.
S&F 100mm dia CI vent cowl fixed to pipe, complete all as specified & as directed by Engg.-in-charge.
S&F 75 mm dia CI floor trap plain grating including jointing with solvent cement 75mm dia, complete all as specified & as directed by Engg.-in-charge.
S & F in repair of chromium plated shower rose 50mm dia round shape, ISI marked, complete all as specified & as directed by Engg.-in-charge.
S&F in repair chromium plated 15mm dia pillar cock long neck with aerator, ISI marked, complete all as specified & as directed by Engg.-in-charge.
S &F in repair 25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia, ISI marked, complete all as specified & as directed by Engg.-in-charge.
S & F as in repairs 15 mm dia angular stop cock with chromium plated long thread with flange, ISI marked, complete all as specified & as directed by Engg.-in-charge.
S & F as in repairs 15 mm dia two way angular stop cock with chromium plated long thread with flange, ISI marked, complete all as specified & as directed by Engg.-in-charge.
S & F in repair bidet spray of Health faucet with 1 meter PVC tube and holder ISI Marked, complete all as specified & as directed by Engg.-in-charge.
S& F as in repairs 15 mm dia stop cock regular body with adujstable wall flange with chromium plated with (concealed type) ISI Marked, complete all as specified & as directed by Engg.-in-charge.
S/F as in repairs of 15 mm dia bib, cock long body with flange with chromium plated fixed with iron pipe ISI Marked, complete all as specified & as directed by Engg.-in-charge.
S&F as in repairs 15mm bore CP central hole basin mixer popup waste system with 450mm long copper pipe and brass nuts ISI Marked, complete all as specified & as directed by Engg.-in-charge.
Supply & Fixing low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and including pvc connection pipe, complete all as specified & as directed by Engg.-in-charge.
Dismantling water tanks of capacity exc 250 ltrs but.nexc 500 ltrs and removing to store, complete all as specified & as directed by Engg.-in-charge.
S&F rotational moulded polythene water storage tanks (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank 500 ltrs including tank led cover complete with fixing arrangement, complete all as specified & as directed by Engg.-in-charge.
S & F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixedt, complete all as specified & as directed by Engg.-in-charge.
S& F in repair 750 X 600 X 200 mm thick Stainless steel Plate Rackt, complete all as specified & as directed by Engg.-in-charge.
Taking out from position framed woodwork as in cupboards/cabinets etc with all fittings ,shutters, shelves, drawers etc in any position fixed in walls or floors & removal to store or credit, all as directed at site for overall sizes exc 0.50 sqm but nexc 1.50 sqm & depthd nexc 60 cmt, complete all as specified & as directed by Engg.-in-charge.
Providing and fixing polyvinyl chloride (PVC) sheet frame of width 150 mm & 18 mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw, frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners, minimum of 3 nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge.
M&L for 18 mm thick solid PVC sheet UPVC Caoted Celuka printed in one of two different colours( with wood grain printed pattern /ivory clour finish) as in kitchen cabinet shutters ,and cupboard shutter all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etct, complete all as specified & as directed by Engg.-in-charge.
S & F stainless steel auto hinges, complete assembly t, complete all as specified & as directed by Engg.-in-charge.
Extra over PVC boards for lipping 1-1.5 mm thick 18 mm wide complete all as specified & as directed by Engg.-in-charge.
S&F degree clip type self closing hinges for cabinets fized with cadimum coated screws all as per samplecomplete all as specified & as directed by Engg.-in-charge.
S&F 100mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutterscomplete all as specified & as directed by Engg.-in-charge.
S&F 75mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint drawers complete all as specified & as directed by Engg.-in-charge.
S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple complete all as specified & as directed by Engg.-in-charge.
S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers complete all as specified & as directed by Engg.-in-charge.
M&L for stainless steel tray as per trade pattern of various sizes for drawer to keep the kitchen utensil, complete all as specified & as directed by Engg.-in-charge.
M&L 50 thick PCC (1:2:4)Type B-1 using 20 mm graded stone aggregate for water tank plinth, complete all as specified & as directed by Engg.-in-charge.
Demiolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise, complete all as specified & as directed by Engg.-in-charge.
M&L for Providing precast RCC using Type B1 1:2:4 (20mm graded aggregate) as in cover slab for man holes set in CM 1:6, complete all as specified & as directed by Engg.-in-charge.
M&L sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 5cm , complete all as specified & as directed by Engg.-in-charge.
Supply only Integral water proofing compund, complete all as specified & as directed by Engg.-in-charge.
Taking down or up steel tubing and connection including cleaning for refixing or removal to store, for following sizes complete all as specified & as directed by Engg.-in-charge.
(a) 25 mm dia
(b) 20 mm dia
(c ) 15 mm dia
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), for following sizes, complete all as specified & as directed by Engg.-in-charge.
(a) 25 mm dia
(b) 20 mm dia
(c ) 15 mm dia
S/F of water tubing, medium grade, galvanized, with all fittings fixed to wall, for following sizes, complete all as specified & as directed by Engg.-in-charge.
(a) 25 mm dia,
(b) 20 mm dia
(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc, complete all as specified & as directed by Engg.-in-charge.
Demolition of reinforced cement concrete of any description for roof,colums ,beam of any type etc, complete all as specified & as directed by Engg.-in-charge.
Use and waste of formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works fair finished surfaces of concrete, complete all as specified & as directed by Engg.-in-charge.
From work to edge of concrete flats, treads, breaks in floors, window cills, concrete railing, opening in concrete walls, floor and roofs n exc 20 cm wide and side of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide with fair finished surface, complete all as specified & as directed by Engg.-in-charge.
Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of fair finished surface, complete all as specified & as directed by Engg.-in-charge.
M & L RCC design mix M-25 using 20 mm graded stone aggregate as in slab supported on wall, roof slab, chijja and in shelve etc, complete all as specified & as directed by Engg.-in-charge.
M & L RCC nominal Mix using 20 mm graded stone aggregate as in beam, roof beam, cantilevers, lintel beam, etc., complete all as specified & as directed by Engg.-in-charge.
S & F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip, complete all as specified & as directed by Engg.-in-charge.
S & F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip, complete all as specified & as directed by Engg.-in-charge.
S & F mild steel TMT bar 5 dia and over upto and including 10 mm dia as in stirrups cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip, complete all as specified & as directed by Engg.-in-charge.
M& L for roof treatment in the following stages :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 2.25Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegatel with groovs shall not be exceeding 1.40 Sqm
Taking down carefully copper/aluminium point wiring for light, fan, bell socket, power socket etc complete with boards, outlet boxes fittings and fixtures such as switch, socket,s, ceiling roses, lampholder, brackets, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for items shall be under sch of credit) and making good disturbed surfaces of walls, floors, etc, complete all as per specified and directed by Engg.-in-charge.
M&L Point wiring (concealed) using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor, 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLSH cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including medium grade PVC concealed conduit (MMS) pipe dia not less than 20 mm with all fittings and accessories ISI marked with valid CML No. (IS 9537-1983), complete fixed on wall/roof/floor etc, with pressed flush metal boxes covered with inner plates & outer plates etc suitable for mounting of Modular switches & sockets inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light / fan / exhaust fan / bell point controlled by one, one way switch or regulator for complete all as specified and directed .
All as per item no. 139 here-in-above, but suitable for one socket outlet 5 Pin 6 Amps on same board.
All as per item no. 139 here-in-above, but suitable for one socket outlet 5 Pin 6 Amps on independent board.
All as per item no. 139 here-in-above, but suitable for one light point controlled by two way switches
All as per item no. 139 here-in-above, but cable size 2.50 sqmm single core multistranded copper conductor for one socket outlet 3 Pin 16 Amps on independent board.
Supply & Fixing switch piano type, flush button single pole, one way 6 amps complete all as specified and directed.
Supply & Fixing switch piano type, flush button single pole, one way 16 amps complete all as specified and directed.
S&F socket outlet 6 Amps, 5 pin 230V AC flush type complete all as specified and directed.
M&L socket outlet 16 Amps, 5/6 pin 230V AC flush type, ISI marked, complete all as specified and directed by Engg.-in-charge.
Supply & Fixing bell push flush type, 5 Amps, single pole one way complete all as specified and directed.
S&F Buzzer ding dong AC 230 volt single pole complete all as specified and as directed.
Supply & Fixing switch piano type, flush button single pole, two way 5 amps complete all as specified and directed.
S&F Electronic fan regulator, socketed stepped type, AC, 230 Volts, flush type, ISI marked, complete all as specified and directed by Engg.-in-charge.
S&F ceiling rose, three terminals, PVC polycarbonate, 230 Volts, ISI marked, complete all as specified and directed by Engg.-in-charge.
Supply and fixing LED lights fitting 1x 20W, 220V, AC, including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, ISI marked, complete all as specified and directed by Engg.-in-charge.
S&F LED light fitting mirror type with outpur diifuser, 2 feet, 10 watt, 220 V including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, ISI marked, complete all as specified and directed by Engg.-in-charge.
S&F insulated batten lamp holder metal cased body of brass with back plate suitable for batten fittings including 9 watt LED lamps, ISI marked, complete all as specified and directed by Engg.-in-charge.
Supply and fixing LED security light fitting 35/45 Watt made out of pressure die cast aluminium powder coated housing high grade heat resistant 4 mm thick toughened glass cover and matrix of power LED's in built electronic driver up to 4 KV surge protection fitted with adjustable pole adaptor to enable on site tilt angle setting and input power 35 W system lumens 85/W operating voltage 160-260 V complete with IP 65/66 protection, ISI marked, complete all as specified and directed by Engg.-in-charge. Note:- (i) Quoted rate is deemed to be inclusive of the cost of assembling of the complete fitting and its testing before and after mounting or erection etc. for proper functioning. (ii) Quoted rate is deemed to be inclusive of the cost of GI bracket made out of 25 mm bore GI tubing, medium grade, bent to shape of 1.20 m long including clamps, nuts, bolts and washers etc. and connecting up with twin core twisted flexible copper conductor cable of suitable size.
Taking down and hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan
Taking down and refixing only exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan
M&L in repairs submain wiring with two runs of 6 sqmm with one run of 4 Sqmm earth wire, all cable suitable for 1100V grade FRLS PVC insulated multi-stranded copper conductor, single core cable conforming to IS 694 drawn through and including PVC concealed conduit pipe and making good the disturbed surface of wall and connected to common earth dolly complete all as specified and directed by Engg.-in-charge. Note :- Two runs of 6 sqmm & one run of 4 sqmm for earth and one run of PVC concealed conduit pipe shall be measured as one length for the purpose of measurement.
S&F prewired distribution board in sheet metal enclosure, 240V for fixing MCB's, copper bus bar conforming to relevant IS, SPN 8 way, complete all as specified and directed by Engg.-in-charge.
S&F prewired distribution board in sheet metal enclosure, 240V for fixing MCB's, copper bus bar conforming to relevant IS, TPN 4 way, complete all as specified and directed by Engg.-in-charge. Note:- (i) Quoted rate is deemed to be inclusive of the cost of flashing on wall concealed complete, making good and matching with existing surface.
Supply and fixing MCB SP 5 to 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002, integrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240 volts, 50 Hz including make necessary and outgoing electrical connection with suitable size of copper lugs Complete with connection testing and commissioning, complete all as specified and directed by Engg.-in-charge.
Supply and fixing MCB SPN 40 to 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002, integrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240 volts, 50 Hz including make necessary and outgoing electrical connection with suitable size of copper lugs Complete with connection testing and commissioning, complete all as specified and directed by Engg.-in-charge.
Supply and fixing MCB TPN 40 to 100 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002, integrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240 volts, 50 Hz including make necessary and outgoing electrical connection with suitable size of copper lugs Complete with connection testing and commissioning, complete all as specified and directed by Engg.-in-charge.
Taking down existing electric meter of any sizeany capacity and deposited to E/M store yard and S&F smart single phase two wire dual source prepaid energy meters BIS 15884 marked in existing meter board / floor panels with pre payment capacity touch keypad based digital having current range 10-60 Amps 240 volt accuracy class 1.0 alongwith parallel home display split unit with inbuilt load control switch vision for TOD and RTC , inbuilt feature to sense the DG mode through PLSI dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tarrif slabs, happy hours and holiday defination, complete all as specified and directed by Engg.-in-charge.
M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion, quoted rates are deemed to be included provision of earth wire protected by 7.50 mtr galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc, including taking down old existing earthing, complete all as directed by Engineer-in-charge.
Supply and laying & testing cable XLPE installed 1100 Voltts heavy duty cable with PVC insulated aluminum conductor of size 16 sqmm 4 core laid in trenches/ducts /encased in GI pipe /fixed to pole all as specified and directed by Engineer-in-Charge.
M/S KAUTILYA GARG
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .