Supplying, Erection and Commissioning 2 Numbers of 100 HP Centrifugal motor pump set and its accessories for newly constructed collection well in Agalancannu

Amount

Supplying of electricallly operated horizontal split casing pump and motor(JYOTHI/ KIRLOSKAR/ BEACON) make AC phase,415 volts,50 HZ,1500 RPM,squirrel cage motor.The pump shall have bronze impeller,high grade steel shaft,flexible coupling set,including the cost of common,M.S. Base plate,foundation bolts,etc.complete with suitable suction and delivery sizes.(100 HP centrifugal motor and pumpset).

Supplying and fixing of 25KVAR power capacitor (CG/L&T/Siemens make) for 50 HP motor complete.

Supplying and fixing of DOL starters 0.5 HP to 5 HP with relay range 0.63 A to 13 A with suitable M.S. angle frame complete.

Supplying and fixing Fully Automatic Auto Transformer Starter (Pedestal Type)(Jyothi/ Kilburn/ Unilec) with oil immersed contactors and auto transformer having 50%,65% and 80% tapping with built in start stop push botton and thermal timer adjustable between 3-12 seconds(Relay range in Amps 90-150) - 100 HP pumpsets

Providing and laying Ductile Iron Double flanged pipes of class K9 (Electro steel/ Sripipes/ Jindal /Electrotherm) conforming to IS specification 8329/2000 and ISI marked suitable for flanged joints in good condition including transportation of D.I.pipe from production centre/company to the site at UT of Puducherry, lowering to the trenches(or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS12288 and CPWD specification. (earth work and jointing of pipes with rubber insertion will be paid separately) -150mm dia.

Providing and laying Ductile Iron Double flanged pipes of class K9 (Electro steel/ Sripipes/Jindal/ Electrotherm) conforming to IS specification 8329/2000 and ISI marked suitable for flanged joints in good condition including transportation of D.I.pipe from production centre/company to the site at UT of Puducherry, lowering to the trenches(or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS12288 and CPWD specification. (earth work and jointing of pipes with rubber insertion will be paid separately) -200mm dia.

Providing and laying Ductile Iron Double flanged pipes of class K9 (Electro steel/ Sripipes/Jindal/ Electrotherm) conforming to IS specification 8329/2000 and ISI marked suitable for flanged joints in good condition including transportation of D.I.pipe from production centre/company to the site at UT of Puducherry, lowering to the trenches(or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS12288 and CPWD specification. (earth work and jointing of pipes with rubber insertion will be paid separately) -250mm dia.

Providing and laying Ductile Iron Double flanged pipes of class K9 (Electro steel/ Sripipes/ Jindal/ Electrotherm) conforming to IS specification 8329/2000 and ISI marked suitable for flanged joints in good condition including transportation of D.I.pipe from production centre/company to the site at UT of Puducherry, lowering to the trenches(or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS12288 and CPWD specification . (earth work and jointing of pipes with rubber insertion will be paid separately) -300mm dia.

Providing and fixing C.I. Ball type non return valve (PN 1) conforming to IS 318 & IS 1363, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 250 mm dia.

Providing flanged joints to double flanged C.I / D.I. pipes and specials , including testing of joints - 150mm diameter pipe

Providing flanged joints to double flanged C.I / D.I. pipes and specials , including testing of joints - 200mm diameter pipe

Providing flanged joints to double flanged C.I./D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc.,complete - 250mm diameter pipe.

Providing flanged joints to double flanged C.I./D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc.,complete - 300mm diameter pipe.

Providing and fixing C.I. sluice valve (PN 1) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 200 mm dia.

Providing and fixing C.I. sluice valve (PN 1) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 250 mm dia.

Providing and fixing in position flanged standard D.I. specials (Electro steel/Sripipes/Jindal/Kiswok) such as tees, bends, collors, tapers, caps etc.conforming to IS specification 9523/2000 and ISI marked - 100 to 300mm dia.

Supply and fixing of 300mm dia strainer

Erection,testing and commissioning of the centrifugal motor pumpset with pipe fittings,etc.complete.- 100 HP motor.

Supplying and fixing of copper flat (25 x 3mm) for earthing arrangements including bolts and nuts etc.

Laying of under ground cable direct in ground including metal road cutting, excavation of earth, sand cushion, brick protection, back filling etc., complete. - above 50 sqmm

Supplying of 3.5x185 sqmm underground cable (Paragon/suncab/Empire) complete.

Laying of UG cable and providing termination of cable joint with suitable cable gland,cable socket etc. complete - 3.5 x 185 sqmm cable.

Making earth pit of G.I. pipe for earthing in earth pit with 40mm dia. G.I. pipe medium class of length 3.05m perforated with 46 Nos of 12mm dia. holes, pipe lowered in bore holes of 150mm dia. and filled in with charcoal and salt in alternative layer of 300mm, the top of G.I. pipe shall be clamped. Earth pit shall be provided with 60cm dia precast ring with 60cm depth alround,covered with R.C.C. precast slab etc. as per I.E. standards.

Providing and fixing of pressure gauge 0-5 KG/CM2 with necessary valve arrangements

Supplying and fixing of 40 X 40 mm size vaccum pump (KIRLOSKAR/ MAXWELL / DEKKAR) make 3 phase monoblock motor and pumpset complete.-3.7 KW/5 HP

Providing, laying and jointing G.I pipes of medium class (blue)(TATA, TNT,Nezone,Apollo,Zenith) conforming to IS specification 1239 part I and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including GI specials such as bends,tees, elbow,coupling,reducer etc.,complete all as per IS and CPWD specification. -25mm dia

Providing, laying and jointing G.I pipes of medium class (blue)(TATA,TNT,Nezone,Apollo,Zenith) conforming to IS specification 1239 part I and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including GI specials such as bends,tees, elbow,coupling,reducer etc.,complete all as per IS and CPWD specification. -50mm dia

Providing and fixing in position G.I. union (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing,jointing materials etc,complete- 25 mm dia.

Providing and fixing in position G.I. union (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing,jointing materials etc,complete- 50 mm dia.

Providing and fixing D.I. dismantling joint ISI marked, with bolts, nuts, rubber insertion etc.,complete -200 mm dia.

Providing and fixing D.I. dismantling joint ISI marked, with bolts, nuts, rubber insertion etc.,complete -250 mm dia.

Providing and fixing D.I. dismantling joint ISI marked, with bolts, nuts, rubber insertion etc.,complete -300 mm dia.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

12mm cement plaster of mix -1:4 ( 1 cement : 4 fine sand)

Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end) - 20mm nominal bore.

Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end) - 25mm nominal bore.

Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end) - 50mm nominal bore.

Power Spares Engineering