Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.6 LAccepted-AOC E 140 2010 BKP VILL AMTALLA PO DUMARCHIR DIST PAKUR PIN 814111 JHARKHAND | PAKUR | PAKUR | JHARKHAND | 814111 | L1 | Accepted-AOC QUOTED AMOUNT IS REASONABLE AND FUND L1 BIDDER | |
| 2 | L2₹20.0 L+₹26,805 (1.36%)Rejected-Finance | L2 | Rejected-Finance QUOTED AMOUNT IS HEIGHER THAN L1 BIDDER | |
| 3 | L3₹20.7 L+₹98,134.60 (4.98%)Rejected-Finance | L3 | Rejected-Finance QUOTED AMOUNT IS HEIGHER THAN L1 BIDDER | |
| 4 | L4₹20.8 L+₹1.1 L (5.76%)Rejected-Finance WARD NO 07 WARD NO 07 THANA PARA NALHATI BIRBHUM WEST BENGAL 731243 | BIRBHUM | WEST BENGAL | 731243 | L4 | Rejected-Finance QUOTED AMOUNT IS HEIGHER THAN L1 BIDDER | |
| 5 | L5₹23.0 L+₹3.3 L (16.6%)Rejected-Finance HATIA ROAD DANGALPARA DISTT DUMKA JHARKHAND PIN 814101 | DUMKA | DUMKA | JHARKHAND | 814101 | L5 | Rejected-Finance QUOTED AMOUNT IS HEIGHER THAN L1 BIDDER |
Tender Value
₹29.3 L
EMD Value
₹58,680
Closing Date
4 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
ARVIND KUMAR SHARMA, SE, CWE (AF) PANAGARH
HQ CWE AF PANAGARH MILITARY ENGINEER SERVICES AIR FORCE STATION ARJAN SINGH PO BIRUDIAH DIST BURDWAN WEST BENGAL PIN 713148
ADDN ALTN TO SHEDS AND PROVN OF SINK AND KITCHEN PLATFORM AT SMQs AT AF STN SINGARSI UNDER AGE (I) (AF) SINGARSI
2023_MES_574271_1
82385/SING/E8
Open Tender
Civil Works
Item Rate
180 days
AGE I AF SINGARSI
AS PER TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
AGE(I) AF SINGARSI
₹58,680
Yes
16 Mar 2023
11 Jan 2023
11 Feb 2023
11 Jan 2023
4 Feb 2023
21 Jan 2023
12 Jan 2023 - 17 Jan 2023
Amount
CIVIL WORK
Cutting of existing 15mm bore steel tubing for alterations or additions complete all as specified and directed by Engineer-in-Charge.
S&F Steel water tubing 15mm bore medium grade galvanised with all fittings including short lengths, fixed to walls and ceiling or laid in floor complete with all new fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed.
S&F Stainless Steel Kitchen Sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or incl fixing catilever brackets and connection union to pipe overall size 915mm x 460mm and Bowl size 410mm x 330mmx 160mm etc. complete all as specified and as directed.
S&F 40mm bore dia waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45 gms/40mm-60 gms complete all as specified and directed.
S&F 50mm bore dia pipes of low density Polyethylene pipes (LDPE) of pressure rating 6 kg/Cm2 in sink complete all as specified and directed.
M&L 75mm dia outlet PVC (SWR) floor trap plain with grating including jointing with solvent cement all as specified and directed.
S&F 15mm dia Bib tap cast copper alloy fancy type chromium plated with capstan handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.
M&L PVC (SWR) pipe 75mm dia single socketed, any length, with rubber ring joints, laid in floors or in trenches complete all as specified and directed by Engineer-in-Charge.
S&F PVC (SWR) bend 75mm dia, any redious, laid in floors or in trenches complete all as specified and directed by Engineer-in-Charge.
M&L PVC (SWR) reducer 75mm dia laid in floors or in trenches complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15cm thickness (below or above ground level) all as specified and as directed including removal of surplus soils/demolished materials not exc 50m and depositing complete all as directed.
Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out, returing filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm in soft/loose soil all complete.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out inhard/dence soil complete all as specified & as directed.
M&L for 40mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in flooring finishing cement concrete surface even and smooth without using extra cement complete all as directed.
M&L for cement concrete type D2 1:4:8 (using 40mm graded aggregate) in foundation filling and mass concrete all as specified & as directed.
M&L for cement concrete type C1 1:3:6 (using 20mm graded aggregate) in foundation filling and mass concrete all as specified & as directed.
M&L Roof trusses (framed), trussed, purlins, water staging, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including necessary welding, fabrication Fe-410W (Gde-E-250) quality B complete all as specified & as directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed.
M&L preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and directed.
Removing excavated material/old debries out of MOD land n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point.
M&L reinforced cement concrete nominal mix type B1 (1:2:4) using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for deformed steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns hooking endsand binding with mild steelwire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer-in-Charge.
M&L for use and wase for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M&L for 20mm thick Granite (of any type) work (table rubbed and polished in steps, jambs, pillars, window-cills, cooking platform sand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite complete all as directed.
M&L for coloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0,11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) complete all as directed.
S&F for glazed ceramic coloured tiles of size 300x200x7mm thick fixed in vertical surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match complete all as directed.
M&L for half brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and as directed.
M&L for 10mm thick rendering/screed bed in Cement Mortar 1:4 on brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified and as directed.
M&L for Rounding to edges of stone slabs/one edge, such as in steps, cooking platform, and other similar situations complete all as directed.
ELECTRICAL WORKS Note : Prior to commencement of electrical works, the contractor needs to submit valid Electrical Liscence in the name of himself/themself or Aggrement with agency having valid Electrical Liscence alongwith Agency's Electrical Liscense to the Accepting Officer for his approval through GE/AGE(I). In absence of such documents, no work will be executed at site and to be treated as defaulter on the Contrctor's part . In addition, Supervisor for execution of electrical works employed by the Contractor shall posses Supervisory Certificate of competancy issued by concerned State Govt/Union Territory and the Worker/Tradesman for execution of Electrical Works must hold necessary permit issued by concerned State Govt/Union Territory.
M&L for point wiring for one light/fan/bell with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) and including PVC casing capping 25/20 mm width with one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC/wooden switch board on existing wall surface for one light/fan point /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as directed by Engineer-in-Charge.
All as per item No 2.01 above but for one 5 pin socket outlet 5 Amps on the same board with other switches complete all as directed.
S&F for switch piano flush type 5 Amp single pole one way complete all as specified and as directed.
S&F for socket flush type 5 Amp 5 Pin complete all as specified and as directed.
M&L for ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and as directed.
S&F in replacement of existing energy efficient tube light fitting of capacity 20 W suspended type/wall mounted type complete convet to LED fitting and copper flexible PVC cable of 0.50 sq mm twin core not more than one metre in length complete all as specified and as directed by Engr-in-charge.
M/S SINGH ENTERPRISE
SHARMA ENTERPRISE
M/S New Builders Corporation
M/S KUMAR AVINASH
M/S ASHA ENTERPRISE
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .