Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.5 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹19.8 L+₹48,300 (2.51%)Rejected-Finance HOUSE NO 108 WARD NO 08 SHAKTI NAGAR DHAR ROAD UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance BEING L2 | |
| 3 | L3₹19.8 L+₹53,530 (2.78%)Rejected-Finance 6 RAILWAY STATION ROAD ONKAR INDUSTRIES GULAMALI PURA BAHRAICH UTTAR PRADESH 271801 | BAHRAICH | UTTAR PRADESH | 271801 | L3 | Rejected-Finance BEING L3 | |
| 4 | L4₹21.7 L+₹2.5 L (12.8%)Rejected-Finance MILITARY HOSPITAL ROAD UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L4 | Rejected-Finance BEING L4 | |
| 5 | L5₹26.9 L+₹7.6 L (39.4%)Rejected-Finance | L5 | Rejected-Finance BEING L5 |
Tender Value
Refer Docs
EMD Value
₹56,700
Closing Date
5 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Udhampur
GE AF Udhampur
REPAIR/ REPLACEMENT OF SECURITY LIGHT/ PERIMETER LIGHTS/ GATE LIGHTS/ FLOOD LIGHT, PHOTO SENSITIVE AUTOMATIC ON/OFF DEVICES AND CERTAIN MISC WORKS AT AF STATION NATHATOP UNDER GE (AF) UDHAMPUR
2023_MES_592433_1
GE/AFU-11/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE AF Udhampur
As per NIT and tender document
9 documents required · 9 mandatory
₹500
GE AF Udhampur
₹56,700
Yes
26 Jun 2023
1 May 2023
7 Jun 2023
1 May 2023
5 Jun 2023
22 May 2023
1 May 2023 - 7 May 2023
Amount
M&L for Repair and replacement of LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 100 lumen/watts, 5700 K, SPD of voltage rating > 10kv including lights to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified. Make : Havells/Bajaj/C&S/Crompton/Polycab or equivalent as approved by GE Note for item ser No 1 to 7 (i) T&P required for repair / maintenance such as ladder, Crane vehicle, hydra, menpower etc are inclusive in the term rate.
Repair and replacement of LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 100 lumen/watts, 5700 K,SPD of voltage rating > 10kv including lights to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified. Make : HPL cat part No HPLLEDSL9060E /Havells/Bajaj/C&S/Crompton/Polycab or equivalent as approved by GE
Repair and replacement of LED street light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 100 lumen/watts, 5700 K, SPD of voltage rating > 10kv including lights to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified. Make : Havells/Bajaj/C&S/Crompton/Polycab or equivalent as approved by GE
Repair and replacement of LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 100 lumen/watts, 5700 K,SPD of voltage rating > 10kv including lights to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified. Make : Havells/Bajaj/C&S/Crompton/Polycab or equivalent as approved by GE
S&F 150 watt LED light energy saving and enviromental friendly long life versatile pressure dia cast aluminium IP66 roadway luminaire with high power LED as light source of capacity 150 watts SPD of voltage rating > 10kv ,5700 /3000 Degree kelvin with suitable driver and surge protection and all standard accessories etc complete all as specified including taking down old. Make : Havells/Bajaj/C&S/Crompton/Polycab or equivalent as approved by GE
S&F LED Building light of 30 watt, IP66 power coated pressure die cast aluminium compact high power LED building light with heat resistant toughened glass complete with GI pipe bracket light grade 1.2m long of suitable bore fixed on wall with GI clamps, nuts and bolts of suitable size complete all as specified and as directed.
S&F street light bracket made out of 40/50 mm dia GI heavy grade tubing not less than 1.5 Mtr long bend to shape including pole clamps made out of 50 x 6 FI and nut bolts and washers all as specified and directed including taking down old. Note for item ser Nos 1.00 to 7.00 :- (i) T&P required for repair/mantenance such as ladder, Crane vehicle, hydra, manpower etc, are inclusive in the item rate.
Supply and fix 1.5 Sqmm 2 core cable, PVC insulated and PVC round sheathed, copper conductor(flexible) industrial cable, 1100 volt, confirming to IS :694 including replacement of old unsv cable. Note- (i) Cable is reqd to be connected from street light to junction box with proper lugs.
LT Cable junction box outdoor shall be made out of Polycarbonate with glass fiber reinforced than 205mm x 255mm x 112 mm(the cable size upto 25 sqmm). The polycarbonate junction box shall be environmental friendly, recyclable, halogen & silicon free, anti acid & anti corrosive. The Junction Box shall be rated for Degree of ingress Protection IP 66 in accordance with IEC 60529.Weatherproof, UV resistant. The gasket material of junction box shall be Polyurethane and the gasket shall be internally embedded. The Junction Box shall be complies with requirements of the standards IEC 60998. The Junction Box with 25Amp Connectors or Terminal Trip or Bus Bar. The Junction Box / Enclosure shall be tested as per IEC including one No. 4 pole connector and chromium plated clamps and nut bolts, cable glands with lock nuts of 2 Nos for each box complete all as per manufacturer’s Make : Cat Part :- KF 2525 B of Hensel/Siemens/GE Power/Rittal/Legrand
S&F GI tubing medium grade 40 mm bore cut to size and fixed along the pole /road cable protection all as required at site or directed by Engineer-in-charge including taking down old.
S&F GI tubing medium grade 80 mm bore cut to size and fixed along the pole /road cable protection all as required at site or directed by Engineer-in-charge including taking down old.
Supply and Laying Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armoured, cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade and connecting and testing in trenches, under floors/ roads or on walls complete including taking down all as specified and directed of following sizes :- Note 1 .: Earth work, excavation shall be measured & paid separately under respective item of Schedule and wherever cable laying on walls and uses of thimbles etc rates shall deemed to be included in the quoted rates). make- Havells/Gloster/Polycab/kei
10 Sqmm, 4 core
16 Sqmm,4 core
25 Sqmm, 3½ core
35 Sqmm, 3½ core
50 Sqmm, 3½ core
95 Sqmm, 3½ core
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cable and foundation of poles, stays and getting out in any type of soil, all as specified.
Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each layer in any type of soil complete all as specified and as directed by Engineer-in-Charge.
Removing surplus excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete, all as specified and as directed by Engineer-in-Charge.
M&L for Sand cushioning to underground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable all as specified and directed. by Engineer-in-Charge. Note: Punned thickness of sand shall be measured.
Common burnt sub class ‘B’ brick laid flat in trenches over and across the length of cable with length of brick perpendicular to the direction of cable adjacent/abutting each other complete all as specified and directed for cable protection.
Automatic street light switch NATURE SWITCH for automatic switching of streets lights based on lux level of natural light. The sensor (nature switch ) along with suitable power contactor, MCB and support terminals should be enclosed in pole /wall mountable enclosure made out of rust proof, electric shock proof, termite proof and FR grade special moulding compund (sintex make SMC Junction Box or equivalent as approved by GE ) conforming to IP-54. The contactor, MCB and circuit wiring 16 sqmm copper shall be suitable enough to take load of 25 KW single phase load /8 KW load equally distributed over 3-phase (8 KW/phase), contactor rating 40 Amps(2 pole)and 40 amps 4 pole and MCB (single pole) rating 63 amps (SP-3 Nos) complete including sheet metal enclosure with stand made of suitable size angle iron and grouting of enclosure using cement concrete 1:2:4 type B-I (using 20mm graded crushed stone aggregate) all as specified and directed by Engineer-in-Charge including taking down old. Make :- Healer and Model No. SWADEEP-02EC25kW 3 PHASE .
M&L for MCCB 3 Pole, 415 V, Fixed type,thermal magnatic load ICS100% of Icu as per IEC 60947-II, 0.8 ln to 1ln, 63 Amps with breaking capacity 25 KA complete all as specified and directed. Make:Indoasian/Standard/Havells/Schneider/ABB or equivalent as approved by GE.
M&L for MCCB 3 Pole, 415 V, Fixed type,thermal magnatic load ICS100% of Icu as per IEC 60947-II, 0.8 ln to 1ln, 100 Amps with breaking capacity 25 KA complete all as specified and directed. Make:Indoasian/Standard/Havells/Schneider/ABB or equivalent as approved by GE.
M&L for MCCB 3 Pole, 415 V, load ICS100% of ICU, 0.8 ln to 1ln, 160 Amps with breaking capacity 25 KA complete all as specified and directed. Standard/Havells/Legrand or equivalent as approved by GE.
M&L for MCCB 4 Pole, 415 V, load ICS100% of ICU, 0.8 ln to 1ln, 100 Amps with breaking capacity 25 KA complete all as specified and directed. Standard/Havells/Legrand or equivalent as approved by GE.
M&L for MCCB 4 Pole, 415 V, adjustable type, thermal magnatic load ICS100% of ICU, 0.8 ln to 1ln, 160 Amps with breaking capacity 25 KA complete all as specified and directed. Standard/Havells/Legrand or equivalent as approved by GE.
M&L for MCCB 4 Pole, 415 V, adjustable type, adjustable type,thermal magnatic load ICS100% of ICU, 0.8 ln to 1ln, 200 Amps with breaking capacity25 KA complete all as specified and directed. Make Indoasian /Standard/Havells/Schneider/ABB or equivalent as approved by GE.
M&L for MCCB 4 Pole, 415 V, adjustable type, adjustable type,thermal magnatic load ICS100% of ICU, 0.8 ln to 1ln, 400 Amps with breaking capacity 36 KA complete all as specified and directed. Make : Indoasian Standard/Havells/Schneider/ABB or equivalent as approved by GE.
Supply and fix in repair heat shrinkable End termination kits and accessories of following capacities and type:-
Outdoor/indoor 120 to 150 Sqmm 3.5/4 core cable jointing kit for 1.1 KV grade cable
Outdoor/indoor 95 Sqmm 3.5/4 core cable jointing kit for 1.1 KV grade cable
Outdoor/indoor 35 to 50 Sqmm 3.5/4 core cable jointing kit for 1.1 KV grade cable
Supply and fix in repair heat shrinkable straight through joint kit and accessories of following capacities and type:-
Straight through joint kit aluminium conductor cable of size 150 to 185 Sqmm and 3.5/4 core
Straight through joint kit aluminium conductor cable of size 25 to 35 Sqmm and 3.5/4 core
Straight through joint kit ialuminium conductor cable of size 50 Sqmm and 3.5/4 core
Straight through joint kit aluminium conductor cable of size 95 Sqmm and 3.5/4 core
Supply, installing, testing and commissioning CPRI approved factory made and tested LT Panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system. Shall be dust and vermin proof, protection class (IP-54) and made of 3.15 mm thick CRCA SHEET & suitable frame work/ support made out of MS Section of size 50 x 50 x 6 mm, front opening type with space for cable entry from back side of the panel, with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete and PCC (1:3:6) type C-2 foundation of size including connections of all out going/in coming existing cables of any size by drawing /digging out cable inclusive of necessary excavation and earth work as required and relaying the cables with retrieved bricks and providing new sand cushioning and crimping suitable size of copper lugs for terminal connections of cables, necessary brick foundation with plastering to the Panel board and taking out of old skelton type panel with control switches complete all as specified and as directed by Engr-in-Charge. including the following items incorporated same panel and removed old unserviceable panel.The scope of work also comprising of the following:- BUS BAR CHAMBER :- (a) 400 Amp insulated copper strip of length not less than 60 cm and 03 phase and neutral, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings. INSTRUMENT CHAMBER :- (i) Digital Volt Meter, 96X96mm, flush type rated 0-500V, with Volt meter push button type- 01 Set. (ii) Digital Amp Meter, 96X96mm, flush type rated 0-250A, with Amp meter push button type- 01 Set. (iii) C.T's 250/5 A CL 1.0 Tape Wound- 01 Set. (Set of three) (iv) Red,Yellow,Green Phase indicating Lights LED type 220V AC- 1 Set. (Set of three).B8 Make of Metering Accessories :-L&T/ AE/ Trinity/ Schneider. INCOMING SUPPLY :- (i) MCCB 250 Amps 25 KA ,ICS 100% of ICU, 0.8 ln to 1 ln, 4 Pole with Thermal Magnetic trip, adjustable type overoad setting, 415 volts , frequency 50 Hz,=01 OUTGOING SUPPLY :- (i) MCCB 100 Amps 16 KA , 4 Pole with Thermal Magnetic 415 volts , 50Hz,=02 Nos., (ii) MCCB 63 Amps 16 KA , 4 Pole with Thermal Magnetic 415 volts , 50Hz,=02 Nos., (ii) MCCB 40 Amps 16 KA , 4 Pole with Thermal Magnetic 415 volts , 50Hz,=02 Nos. Make of MCCB:-L&T/ Siemens / Legrand The panel manufacturer should have following Govt. Approved Certificates: 1. Panel shall be installed at least 45 cm above ground 2. All civil/electrical work & material is deemed to be included in the quoted rates 3. Drawing of panel shall be got approved from GE.
M&L for cutting the existing cable from loop near the panel and making end termination with aluminium lugs of suitable size without jointing kit with cable glands suitable for LT U/G cable of following sizes:
120 x 3.5 to 185 x 3.5 sqmm .
50 x 3.5 to 95 x 3.5 sqmm .
Trimming of tree in vicinity of electric supply pole/street light pole/solar modules & depositing at various places n exc 50m all as directed by Engineer-in-Charge.
Painting to steel tubular swaged poles 9/11 mtr long complete (except above the perimeter wall portion) including all MS work mounted on pole, earth protection & with pipe (if exists) with one coat of aluminium paint and synthetic enamel paint from top of perimeter wall / PCC coping and numbering of poles with white synthetic enamel paint on black back ground complete all as specified and directed by Engr-in-Charge
Earthing complete with copper earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick as earth electrode burried directly in ground (earth pit not less than 3.75 Meter deep below ground level) with top edge of the earth plate not less than 2.5mtr below ground level using copper earth strip 20 x 3 mm dia as earth continuity conductor connected to earth plate by means of copper thimbles, nuts, bolts, washers including brazing etc of earth electrode and earth wire by means of welding, all as directed including providing watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 2 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal dust and salt all around the earth plate, earth work in any type of soil , removing surplus excavated material all as required at site and as specified in EP No 3 of MES SSR Part-I (2009) directed by Engineer-in-charge including testing on completion. Note : (i) Extra excavation of earth work more than 3.50 mtr shall be meassured and paid separately. (ii) The grid of earthing trhough earth strip to achieved earth resistance less than 01 ohm to05 ohm shall be deemed into the quoted rate and no extra payment shall be made to contractor. (iii) The test point shall be made after the grid of earthing and algebric sum of of strip shall be measured after 7.5 mtr earth pit.The strip beyond the total sum shall be paid seperately (a) Soil shall be provided by the contractor from outside the MOD land for refilling the remaining portion of earth pit for increasing soil conductivity without any extra cost to the Govt. (b) GI protation pipe shall be procuded and installed and shall be measured and paid seperately. (c) Earthing will be carried out in presence of users and MES rep with entire satisfaction. (d) The ground enhansing material (GEM) / chemicals shall be added with soil and the GEM/chemicals shall be measured and paid seperately.
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing strip 20x3mm copper strip, insulator,clips etc. complete all as speciefed and as directed.
Automatic street light switch NATURE SWITCH for automatic switching of streets lights based on lux level of natural light. The sensor (nature switch ) along with suitable power contactor, MCB and support terminals should be enclosed in pole /wall mountable enclosure made out of rust proof, electric shock proof, termite proof and FR grade special moulding compund (sintex make SMC Junction Box or equivalent as approved by GE ) conforming to IP-54. The contactor, MCB and circuit wiring shall be suitable enough to take load of 8 KW single phase load /8 KW load equally distributed over 3-phase (7 KW/phase), contactor rating 25 Amps, 4 pole and MCB (single pole) rating 32 amps (SP-3 Nos) complete including sheet metal enclosure with stand made of suitable size angle iron and grouting of enclosure using cement concrete 1:2:4 type B-I (using 20mm graded crushed stone aggregate) all as specified and directed by Engineer-in-Charge including taking down old. Make :- Healer and Model No. SWADEEP-02EC8KW 3 PHASE .
S&F of DWC HDPE tubing 80 mmConforming to IS 16205 bore for open/underground laying cable, cut to size and making the tubing for cable protection including cutting of road etc/cutting of PCC and making the good surface complete all as specified and directed by Engr-in-Charge. Note :- (a) The using of GI Clamp in the wall/drainage rate are deemed to be included in the quoted rate. (b) Drawing existing cable through DWC pipe shall be deemed to be included in the quoted rates.
S&F of DWC HDPE tubing 50 mmConforming to IS 16205 bore for open/underground laying cable, cut to size and making the tubing for cable protection including cutting of road etc/cutting of PCC and making the good surface complete all as specified and directed by Engr-in-Charge. Note :- (a) The using of GI Clamp in the wall/drainage rate are deemed to be included in the quoted rate. (b) Drawing existing cable through DWC pipe shall be deemed to be included in the quoted rates.
Supply and fix 120 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k SPD of voltage rating > 10kv luminaire engergy saving, environmental friendly long life with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directed Make Wipro/Crompton or equivalent approved by GE
Supply and fix 70 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k SPD of voltage rating > 10kv engergy saving, environmental friendly long life exclusive innovative die cast aluminium flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directed Make- Wipro/Crompton or equivalent approved by GE
Supply and fix 100 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k SPD of voltage rating > 10kv engergy saving, environmental friendly long life exclusive innovative die cast aluminium flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation incl taking down old one etc complete as specified and directed Make- Wipro/Crompton or equivalent approved by GE
Supply and in repair of Change Over 400 Amps, 415 V, as per existing change over suitable of size with connected assosieries including taking down etc. Complete all as specified and as directed.
Supply and in Repair of Change Over 600 Amps, 415 V, as per existing change over suitable of size with connected assosieries etc complete all as specified and as directed.
Supply and in Repair of suitable size of nut bolts/ washers complete all as specified and as directed.
Supply and in repair of MCB SP 20 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including accessories therein & disposing from site complete all as specified and as directed.
Supply and fix in repair of MCB TPN 63 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including accessories therein & disposing from site complete all as specified and as directed.
Supply and fix in repair of MCB SPN 40 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic including accessories therein & disposing from site complete all as specified and as directed.
Supply, installation, testing, commissioning & electrically connected feeder pillar outdoor type, single door compartmentized with looking arrangement canopy at top weather proof, verman/dust proof of suitable size cubical type factory made of CRCA MS sheet 3.15 mm thick machine pressed of size 60x60x40 cm & angle iron frame 40x40x6 mm for legs and including grouted in PCC 1:2:4 type B1 (20 mm graded stone aggregate) suitable 440 volts AC 3 phase 4 wire bus bar 4 pole made out of suitable size copper strip capacity 200 Amps Fully mounted on procelain insulator enclosed chamber with open able shutter both sides complete all as specified and directed by Engr-in-Charge.
M&L for brazing work with GI brazing alloy rod with help of oxygen and LPG cylinder using required Galvanised iron of size 20 mm x 3 mm upto 30 cm length along with cleaning work of strip with descaling solution /emery paper which are laid as roof/down conductor on any height of building complete all as specified and directed.
M&L for brazing work with GI brazing alloy rod with help of oxygen and LPG cylinder using required Galvanised iron of size 25 mm x 4 mm upto 30 cm length along with cleaning work of strip with descaling solution /emery paper which are laid as roof/down conductor on any height of building complete all as specified and directed.
M&L for brazing work with Copeer Earthing Strip with help of oxygen and LPG cylinder using required Galvanised iron of size 20 mm x 3 mm upto 30 cm length along with cleaning work of strip with descaling solution /emery paper which are laid as roof/down conductor on any height of building complete all as specified and directed.
M&L for brazing work with Copeer Earthing Strip with help of oxygen and LPG cylinder using required Galvanised iron of size 25 mm x 4 mm upto 30 cm length along with cleaning work of strip with descaling solution /emery paper which are laid as roof/down conductor on any height of building complete all as specified and directed.
M&L for brazing work with Copeer Earthing Strip with help of oxygen and LPG cylinder using required Galvanised iron of size 32 mm x 6 mm upto 30 cm length along with cleaning work of strip with descaling solution /emery paper which are laid as roof/down conductor on any height of building complete all as specified and directed.
Supply and replacement of Smoke Detectors Complying with and type certified to EN - 45 Addressable type smoke detector Photoelectric /Optical with base with self built intelligence as per IS: 11360 including taking down complete all as specifeid and as directed.
Servicing of Fire Alarm control panel complying with BS EN 54 single loop panel /double loop of capacity from 99 detectors & modules upto 200 detector with UV/IR Detection capacity including the following technical specifications and all specified and directed by AGE E/M Note :- (i) All new spare parts shall be measured and paid for separately as supply (a) Primary power supply : 220v +/- 10% AC, 50Hz (b) Standby power supply : 24 V DC (2 Nos of 12V, 7 SMF batteries ) (c) Battery charging voltage ; 27.5 +/- 1V (d) Battery caharging current : 500 mA (max) (e) Pragrammable relay contact : 3 Sets. (f) Relay Contact Rating : 2 Amps 30 V DC (g) Operating temp :- 100C to +550C (h) Humidity : 0 to 95% RH (i) Internal wiring complete two core (j) 1000 event history log (k) Built in battery Charger (l) Two level password protection (m) Contamination level alart for maintenance (n) Detection sensitivity adjustments (from panel) (o) Alarm verification feature (p) upto 127 devices per loop Note : All new spare parts shall be measured and paid separately
Supply only in replacement battery shield accid as per existing size suitable for control panel 24 V DC (2 Nos of 12 V, 7 SMF batteries) complete all as specified and as directed
Supply only in replacement Remote reponse indicator of fire alarm panel complete all as specified and directed Engr-in-Charge
Supply only in replacement panel mother board of fire alarm panel complete all specified and directed by Engr-in-Charge
Supply, laying & testing PVC insulated, PVC sheathed FRLS electric control cables (Heavy duty) with stranded fire serval cable copper conductor of size 1.5 sq mm ,6 core, 1100 Volts grade complete including taking down complete all specified and directed Engr-in-Charge.(Make: KEI/ Finolex/ RR cables/ Polycab/Havells)
S&F in repair of conventional fire alarm panel the following technical specifications and all specified and directed Engr-in-Charge. (a) Oprating voltage : Between 15-30 volts DC peak (b) Max Stand by current : less than 1mA (c) Alarm LED current : max 1 mA (d) Operating Temp :- 100 C to +550 C (e) humidity : 0 to 95% RH (f) Wiring : 2 core (g) Protective transparent flip cover to prevent accidental activation (h) Electonic Addressing (j) Blinking LED for visual supervision (k) No frangible glass (l) Stable Communication with noise immunity (m) Automatic device Mapping. (n) Alarm flag for fast alarm reporting.
S&F in repair of Addressable manual call point resttable type including the following technical specifications and all specified and directed Engr-in-Charge. (a) Oprating voltage : Between 15-30 volts DC peak (b) Max Stand by current : less than 1mA (c) Alarm LED current : max 1 mA (d) Operating Temp :- 100 C to +550 C (e) humidity : 0 to 95% RH (f) Wiring : 2 core (g) Protective transparent flip cover to prevent accidental activation (h) Electonic Addressing (j) Blinking LED for visual supervision (k) No frangible glass (l) Stable Communication with noise immunity (m) Automatic device Mapping. (n) Alarm flag for fast alarm reporting.
slathia construction works
MOHAN LAL AND SONS
RANBIR ENTERPRISES
AJ. Owners
MAHAJAN TRADING CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .