SPL REPAIR TO BLDG NO. P-203 (OTM) OF RAJPUT REGT CENTRE AT FATEHGARH

Amount

Demolition of cement Concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L 75 mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in plinth protection, subbase of floors complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each and refixing in the same opening after nessessary, repair, weilding, screwing, resecuring & adjusting, and making good the disturbed surfaces using cement mortar or cement concrete complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm not exceeding 4 square metre each, complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm and re-fixing in the same opening after resecuring or easing & adjusting complete all as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: Stainless steel butt hinges shall be paid separately)

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type wiremesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: Stainless steel butt hinges shall be paid separately)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 100 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note - (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note - (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)

M & L for Cutting chases, pinning in, making good to facings of brick work masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed.

Providing and fixing in repair factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 18 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: Stainless steel butt hinges shall be paid separately)

S & F in repair Rolled sections Fe 410W Gde E-250 Quality A as in framing for cladding, glazing, Stand for shelf/study table and the like fixed with angle cleats and connecting plates, etc. conforming to Fe-410-W Gde - E 250, Quality 'A' including necessary cutting holes if necessary of reqd size, and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 etc complete all as specified and directed

M&L for two coat of synthetic enamel paint over a coat of red oxide primer including preparation of steel surfaces over 10 cm in width or girth, not otherwise described complete all as specified & directed.,

S&F factory made Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including following fitting welded to frame shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles of Z Sec 100mm long (c) Stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges – 01 No per leaf (e) MS Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf complete all as specified and directed. Note : Glass and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

S&F factory made Steel Window 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf complete all as specified and directed. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

All as per item No.16 above but as in ventilator fixed type (partly glazed and gauzed) complete all as specified and directed

M & L for framed work such as guard bars made of square bars fixed to flat iron or to box type window frame confirming to Fe-290 gde E-165 complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality in square size of each pane n. exc 0.5 sq. m in each pane (in single/double /triple storey bldgs), in steel/wooden window/vent with cleat/oil putty as per site requirement complete all as specified and directed.

S & F 3 mm thick Figured glass, pin head type in square size of each pane n. exc 0.5 sq. m in each pane(in single/double /triple storey bldgs), in steel/wooden window/vent with cleat/oil putty as per site requirement complete all as specified and directed

M&L for preparation of new or previously untreated surface of steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint etc complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, wodden beads to steel windows/wodden doors (in single/double /triple storey bldgs) all as per site requirement complete all as specified and directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed

S&F Aluminium handle 150 mm long cast type anodised, complete all as specified and directed

S&F Aluminium tower bolt 200 mm long, anodised barrel tower bolts of extruded sectioncomplete all as specified and directed

S&F Stainless steel Butt hinges 100 mm medium weight complete all as specified and directed

Demolition of brick work or stone masonry, built in cement mortar incl all quoins, arches pillars complete all as specified and directed

M&L of brick work (old size) with sub class 'B' burnt bricks straight or curved on plan exc. 6 m mean radius bult in CM 1:6 complete all as specified and directed

S & F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description, any position including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 450 x 350x 7mm thick coloured tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match, over and inlcuding 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and fair without using extra cement, shade & design of tile as approved by EIC/AGE (I) etc compete all as specified and directed.

M&L for non skid ceramic any coloured/printed tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by AGE(I), set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles, over and including 15 mm thick screed bed in cement mortar (1:4) in floorse etc complete all as specified and directed.

Supply and fixing in repairs vitreous China squatting pan of pattern (Orrissa pattern) size 580mm x 440 mm white with PVC P Trap of 110/125mm bore as suitable at site, front or back inlet and integral foot rests and connected pipe and anti syphonage pipe and making good floor including lime concrete).etc complete all as specified and directed.

S&F in repair Vitreous China Wash down water closet semi-pedestal patteren (anglo indian type) white with platic seat cover including all fittings complete all as specified and as directed .

S & F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed

S & F in repair Vitreous China Urinal (Half stall type, white), with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and directed.

S & F in repair 32mm dia PVC waste pipe flexible extendable type complete all as specified and directed.

S & F in repair CP grating doom 110 mm dia without hole complete all as specified and directed.

S & F in repair CP grating doom 110 mm dia with hole complete all as specified and directed.

S&F in repair Low Level Flushing Cistern PVC valveless syphonic action type, 10 ltrs capacity white, with inlet pipe connection, ball float and handle including brackets and flush pipes to squatt pattern closet including all joints complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for RCC water tanks etc complete all as specified and directed.

S & F Rotational moulded polyethylene water storagetanks (cylindrical vertical with closed top) 1000 Ltr capacity, hoisted and fixed in position, including 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed

Dismanting of existing sunken treatment including plaster and M&L for water proofing treatment on existing sunken floor/wall with the following specification complete all as specified and directed- (a) 15mm thick (average) plaster in CM 1:3 on sunken floors and walls using WPC in as per manufacturer instruction (b) Apply one coat bituminous primer @ 0.5 Kg/ Sqm on walls and floor conforming to IS 3384-1965 on prepared surface till the surface is properly impregnated (c) Apply hot bitumen 85/25 grade @ 1.2 Kgs/Sqm confirming to IS 702-1988 (d) Laying polymeric water proofing memberance weight not less than 3.0 Kgs/Sqm as per manufacturer instructions confirming to IS (e) One spout of 40mm GI pipe length 0.45 M shall be provided in sunken floor (f) Filling of sunken floor with PCC 1:5:10 upto height directed (g) fixing of trap as per site requirement

Taking up or down Steel Tubing bore of pipe in 15mm and connections complete all as specified and directed.

All as per item No 45 above but of 20mm bore.

All as per item No 45 above but of 25mm bore.

S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting fixed to walls, ceiling or laid in floors etc complete all as specified and directed.

All as per item No 48 above but of size of 20mm bore

All as per item No 48 above but of size of 25mm bore

Refixing old steel tubing and connections 15 mm bore in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

All as per item No 51 above but of size of 20mm bore

All as per item No 51 above but of size of 25mm bore

S&F in repair 15mm bib tap Chromium plated fancy type screwed down for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.

S&F in repair 15 mm bore concealed Stop cock fancy type screwed down for iron pipe and fixed to 15mm bore pipe , complete all as specified and directed.

S&F in repair Stop valves angle, fancy type , screwed down for iron pipe and fixed to 15mm bore pipe , complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves 25 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed

S & F in repairs brass chromium plated shower rose 125mm size with shower arm complete all as specified and directed

S & F tubular towel rail 20mm dia 60 cm long between flange, brass chromium plated including bracket fixed in repairs complete all as specified and directed

Demolition and breaking up drain pipes 100 mm dia(Salt glazed ware, AC or reinforced concrete) set in cement mortar incl cleaning sludge/wastage etc at shaft portion of bldg where new pipes to be fixed complete all as specified and directed.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls / floors etc complete all as specified and directed.

S&F 110 mm bore PVC(SWR) bend any radius complete all as specified and directed.

S&F 110 mm bore PVC(SWR) Tee having access door any radius complete all as specified and directed

Demolition and breaking up drain pipes 200 mm dia (Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 200mm bore Salt glazed stoneware drain pipes, grade “A’ laid in trenches and jointed in CM 1:1 etc complete all as specified and directed.

S&F 200 mm bore Salt Glazed Stoneware bend any radius complete all as specified and directed.

S & F for cast iron floor trap 100mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

S & F for cast iron Nahani trap 100mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

S & F for Stack clamps out of 50 mm by 5 mm MS flat iron and 16mm dia MS round bar stays, including bolts and nuts and securing ends of stays to wall or roof for 100/110 mm dia pipe complete all as specified and directed.

S & F Salt-glazed stoneware gully traps type S, square or round mouthed size 150 x 150 mm complete all as specified and directed

Taking down cement plaster on brick wall or stone wall etc. including raking out joints hacking for key, scrubbing down with water etc and disposed off unserviceable material of out side MD land complete all as specified and directed

M & L Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and fair complete all as specified and directed.

M & L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and fair complete all as specified and directed.

M & L Rendering 5mm thick in CM (1:3) on fair faces of brick work/ceilling concrete surfaces to be finished even and fair complete all as specified and directed.

M&L for Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over a coat of alkali resistant primer over a coat of 1mm thick cement base wall care putty complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over 1mm thick weather proof wall care putty complete all as specified and directed. Note :- the work shall be executed through expert team manufacturer or auth applicator of manufacturer.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceilling complete all as specified and directed

M&L for complete removal of existing treatment on old plasterd surface, preparation of old surfaces and applying Two coats of Oil Bound Distemper over a coat of alkali resistant primer over a coat of 1mm thick cement base wall care putty complete all as specified and directed.

M & L for complete removal of existing treatment on old plastered surface, preparation of old surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old plastered surfaces over 1mm thick weather proof wall care putty complete all as specified and directed

M & L for preparation of old plastered surfaces of ceiling by rubbing down and making surface smooth and applying two coats of white wash complete all as specified and directed

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layer on roofs complete all as specifed and directed.

Demolition mud in roofs any thickness including and leeping (whether full thickness removed or only a part thereof) including tarfelt etc and removing debris by any means out side of defence land complete all as specified and directed.

M & L for providing, cement concrete (1:2:4) type B-1 using 20mm stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges, including making kerbs at wall and roof junction complete all as specified and directed.

M&L for preparation of old roof surfaces by brooming and watering, clearing all dust particles and providing PCC 1:2:4, using 20 mm graded stone aggregate with water proofing compound as per manufacturer instruction as in padding / levelling course of average thickness not exceeding 50 mm complete all as specified and directed. Note : Water proofing compound will be measured and paid separately.

M&L for water proofing treatment on existing roof with the following specification complete. (a) Preparation of surface and M&L for 10 mm thick (average) plaster on roof in CM (1:4) with water proofing compound as per manufacturer instruction. (b) Apply bituminous primer @ 0.3 Ltr / Sqm confirming to IS 3384-1965 on prepared surface till the surface is properly pregnated. (c) Apply hot bitumen 85/25 grade @ 1.2 Kgs / Sqm confirming to IS 702-1988 (d) Laying APP modified polymeric water proofing membrane 3 mm thick of weight not less than 3.00 kg / sqm . NOTES:- (i) The work of water proofing treatment shall be got executed throughh expert team of manufacturers or authorised applicator of manufacturer. (ii) Water proofing compound shall be measured and paid for seperately under respective items complete all as specified and directed..

M&L for 40 mm thick brick tiles laid over 15 mm thick bedding layer of CM (1:6) and joints grouted flush in CM (1:3) mixed with crude oil @ 5% by weight of cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M & L for machine cut kota stone slab as in flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed

All as per item No 90 above here-in-before, but except stone, complete all as specified and directed

M & L for machine cut kota stone slab as in skrting/dado 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete. over and including 15mm thick rendering in CM 1:4 complete all as specified and directed

S & F in repair Plain mild steel wire 4mm dia, galvanised class 3, as in detached work as mosquito nets and fixing to straining bolts, hooks, eyes, etc including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, incl restraining, resecuring and making good staples etc complete all as specified and directed Note :- Each line of wire to be measured.

S&F in repair for framed work for portions framed and hung as gates,including hinges,stops,hand-made sliding bolts etc. conforming to Fe.290.Gde-E-165 complete all as specified and directed

S&F in repair Expanded metal of weight less then 4.00 kg/Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed.

M&L for plain cement concrete as in bed block type B2 1:2:4 (using 40 mm graded stone aggregate) complete all as specified and directed

Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed.

Taking down copper/aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed.

M&L for point wiring with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit medium grade with fittings (ISI marked) sunken pressed steel galvanised terminal boxes minimum 1mm thickness with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc for One light/ holder/fan/exhaust fan point controlled by one switch complete all as specified and directed for the following- Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour.

All as per item No.99 here in before but for One 5 pin 5 Amp switch socket combination point on an independent board complete all as specified and directed.

All as per item No.99 here in before but for One 5 pin 5 Amp socket point controlled by one switch on same board complete all as specified and directed.

All as per item No.99 here in before but for one 16 Amp 6 pin switch socket combination independent with 4.0 Sqmm FRLS unsheated copper conductor single core multistranded complete all as specified and directed.

S&F switch piano flush type 5 Amp single pole one way complete all as specified and directed

S&F socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed

S&F switch socket combination 2 in 1 flush type 6 Amp 5 Pin complete all as specified and directed

S&F switch socket combination 2 in 1 flush type 16 Amp 5 Pin complete all as specified and directed

S&F fix electronic fan regulator 5 stepped type complete all as specified and directed.

S&F ceiling rose PVC / poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. ( Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper each conductor shall be measured as one unit length.)

Supply and fixing of VTPN DB suitable for mounting MCCB as incomer of rating 100 AMP vertical distribution board 12 way with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified and directed.

Supply and fixing of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified and directed.

Supply and fixing of MCB distribution board SPN 240 Volt 4 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified and directed.

S&F of MCCB 100 Amp, 16 KA, 4 pole including complete electrical connection by appropriate size of copper lugs complete all as specified and directed.

S&F of MCB SPN 63 Amp, 240 volt 'C' curve complete all as specified and directed.

S&F of MCB SP 6-32 Amp, 240 volt 'C' curve 10 KA complete all as specified and directed.

S&F of LED light fitting 4 feet, 20 watt, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including dismentling complete all as specified and directed.

S&F cable XLPE insulated screened PVC bedded, galvanized steep strip armoured service cable pole to building electric power cables (heavy duty) 1100 volts grate with stranded alumnium conductor of size 25 Sqmm 3.5 core complete all as specified and directed.

M&L sand cushioning for cables complete all as specified and directed.

M&L for old size brick well burnt, laid flat for cable protection complete all as specified and directed.

Excavation in trenches not excedding 1.5 mtrs wide and note exceeding 1.5 mtr in depth for laying of cables including getting out in any type of soil complete all as specified and directed.

M&L for returning filling in including spreading, leveling and well ramming in layers not exceeding 25 cm each layer of any type of soil complete all as specified and directed.

M&L for removing surplus excavated material from site not exceeding 50 mtr from stating point and depositing where directed at level not exceeding 1.5 mtr above the starting point compete all as specified and directed.

S&F in repair to metal plug & socket DB with metal plug and MCBs double pole and neutral enclosre with a two pin earth plug and socket suitable for 20 Amp complete with one single pole MCB complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown iln electrical plate No - 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but with earth lead protection pipe and test on completion after dismantling unserviceable erthing (above GL only) including dismantling of exsisting earthing complete all as specified and as directed.( Note :- On testing after completion if desired earth resistence is not obtained, the earthing will be redone at no extra cost.)

P K ENTERPRISES (BID ID -3109245)

M/S SRI JAGDAMBE TRADERS (BID ID -3106694)

M/S S P CONSTRUCTION (BID ID -3105781)

ASHISH SHARMA (BID ID -3108823)

kpenterprises (BID ID -3121389)