Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹35.6 L+₹51,970 (1.48%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹36.9 L+₹1.8 L (4.99%)Rejected-Finance 53 HOUSING BOARD COLONY PHASE II UDHAMPUR 182101 J K | UDHAMPUR | UDHAMPUR | J K | 182101 | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹37.2 L+₹2.1 L (5.90%)Rejected-Finance 6 RAILWAY STATION ROAD ONKAR INDUSTRIES GULAMALI PURA BAHRAICH UTTAR PRADESH 271801 | BAHRAICH | UTTAR PRADESH | 271801 | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹37.6 L+₹2.5 L (7.17%)Rejected-Finance NEAR MES FILTER PLANT SANGOOR UDHAMPUR J K 182101 | UDHAMPUR | UDHAMPUR | J K | 182101 | L5 | Rejected-Finance OTHER THAN L1 |
Tender Value
Refer Docs
EMD Value
₹87,250
Closing Date
26 Aug 2022, 6:00 pmClosed
GE (UTILITIES) UDHAMPUR
GE (UTILITIES) UDHAMPUR, PO-GARHI, PIN-182121
Repair/Maint of street lights/security lights at CPH area under GE (Utilities) Udhampur.
2022_MES_535086_2
GE/U-23/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE (UTILITIES) UDHAMPUR
Please refer Tender documents
8 documents required · 8 mandatory
₹500
GE (UTILITIES) UDHAMPUR
₹87,250
Yes
28 Sept 2022
5 Aug 2022
29 Aug 2022
5 Aug 2022
26 Aug 2022
12 Aug 2022
Amount
Taking down carefully existing unserviceable street light fittings of any capacity & size from poles/buildings and refixing the same on poles/ building after making the fittings serviceable complete all as specified and directed by Engr-in-Charge. Note:- (i) Spare parts required for making the street light functional shall be measured and paid separately under relevent items of BOQ. (ii) The cost of Replacement of minor Parts i.e. nuts/bolts,TC wire,connectors etc are deemed to be included in this item. (iii) Necessary elevator/VMSL shall be arranged by contractor for repairs.
Painting to steel tubular poles 9/12 metre long with two coats of aluminium paint including brackets, clamps, nuts bolts, washer etc. including making yellow and black strips alternatively (30 cm width each) on pole upto 1.5 metre from the ground level and marking of pole Nos with black paint having back ground yellow as per existing complete all as specified and directed by Engr-in-Charge.
Replacement of open construction, electromagnetic type, vacuum imprignated, copper wound ballast (choke) 240 V supply voltage,50 HZ for HPSV /MH fittings of 150 Watt capacity complete all as specified and directed by Engr-in-Charge. Make: Havells Cat Part No- LHBW20115036 or as equivalent in Philips/CG/Bajaj/Polycab/Wipro.
All as per item No 3 here-in-before but of capacity 250 Watt. Make: Havells Cat Part No - LHGMCJENAC1250 or as equivalent in Philips/CG/Bajaj/Polycab/Wipro.
All as per item No 3.00 here-in-before but of capacity 400 Watt. Make: Havells Cat Part No - LHGMCJENAC1400 or as equivalent in Philips/CG/Bajaj/Polycab/Wipro
Replacement of old unserviceable HPSV Clear Lamp with new HPSV Clear Lamp, 240 V, 50 HZ of 150 Watt capacity complete all as specified and directed by Engr-in-Charge. Make: Havells Cat Part No - LHSS16015099or as equivalent in Philips/CG/Bajaj/Polycab/Wipro
All as per item No 4.00 here-in-before but of capacity 250 Watt. Make: Havells Cat Part No - LHSS16025099 or as equivalent in Philips/CG/Bajaj/Polycab/Wipro
All as per item No 4.00 here-in-before but of capacity 400 Watt. Make: Havells Cat Part No - LHSS16040099 or as equivalent in Philips/CG/Bajaj/Polycab/Wipro.
Replacement of old Metal halide single ended clear tubular lamp (MH SET) with new one , 240 V, 50 HZ , 4000 K-6000 K of 250 Watt capacity complete all as specified and directed by Engr-in-Charge. Make: Havells Cat Part No - LHLQABIGUC80250 or as equivalent in Philips/CG/Bajaj/Polycab/Wipro.
All as per item No 5.00 here-in-before but of capacity 400 Watt. Make: Havells Cat Part No. -LHLQALIGUL70400 or as equivalent in Philips/CG/Bajaj/Polycab/Wipro.
Replacment of old unserviceable/ defective ignitor with new ignitor of HPSV fitting of capacity 150/250/400 Watt complete all as specified and directed by Engr-in-Charge. Make:- Havells Cat Part No. LHGEAJENNNA1000 or equivalent in any of the make as specified in particular specification or approved by GE.
Constant current LED driver with MCPCB(in replacement) for energy saving & environment area light fitting > 90 watts security light with active power factor correction (APFC) electronic driver. LED driver 90 watt with operating voltage between 100-270V AC of existing specification complete all as specified and directed by Engr-in-Charge. Note : It should be suitable for any makes of LED street /flood light Fittings.
Constant current LED driver MCPCB (in replacement) for energy saving & environment area light fitting > 60 watts security light with active power factor correction (APFC) electronic driver. LED driver 60 watt with operating voltage between 100-270V AC of existing specification & make complete all as specified and directed by Engr-in-Charge. Make:- C&S/Crompton/Havells/Syska/ Surya Roshini/Polycab/Wipro. Note: It should be suitable for any makes of LED street /flood light Fittings.
Surge Protection Device (SPD) (in replacement) of capacity 10 KV/5KA for LED energy saving & environment area light of 45-200 watts security light/ flood light with maximum operating voltage 320V AC, 50 Hz & maximum peak current 10 KA of existing specification complete all as specified and directed by Engr-in-Charge.
Replacement of old unserviceable rusted GI tubing brackets, 40mm bore, light grade with new GI tubing bracket, 40mm bore, light grade, 1.20 metre length ,made to shape including MS clamp with nuts, bolts and washers etc complete all specified and directed by Engr-in-Charge.
Terminal box made out of SMC with hinged door and locking arrangements of size 140x140x95mm (in repair) including Backlite 4 way connector,M.S. Clamps suitable for pole ,PCC/MS/GI/rail etc. with bolt, nut and washer ,electrical connections including MCB SP 6-32 Amps complete all as specified and directed by Engr-in-Charge. Make: - Sintex product code No GSJB-1414 or its techno commercial equivalent in Havells/CG/Polycab/Bajaj/Wipro.
Supply only insulation tape 25 mm wide 6 Mtr long ISI mark of Red-Yellow-Blue-Black-Green colour complete all as specified and directed by Engr-in-Charge. Make: Steel grip or equivalent any approved make.
Replacement of old unserviceable cable with PVC insulated 1.5 sqmm, three core, multi stranded, copper conductor cable from junction box/OH line to street light fitting or for engagement lights complete all as specified and directed by Engr-in-Charge. Make:- Havells cat part No. WHMFDSKB21X5 or as equivalent in make as specified in particular specification.
Taking out UNSV UG cable of any sizes/ capacity complete all as specified and directed by Engr-in-Charge.
PVC insulated multi stranded aluminum conductor PVC cable sheathed 10 Sqmm twin core (in replacement) and making connections of street light fittings with overhead lines/UG Cable complete all as specified and directed by Engr-in-Charge. Make:- Plaza/ Paragon/ Kalinga.
PVC insulated multi stranded aluminum conductor PVC cable sheathed 6 Sqmm twin core (in replacement) and making connections of street light fittings with overhead lines/UG Cable complete all as specified and directed by Engr-in-Charge. Make:- Plaza/ Paragon/ Kalinga.
Two single core PVC insulated and sheathed copper conductor cable (in repair) 2.5 Sqmm nominal size and one single core PVC insulated and sheathed copper conductor cable 2.5 Sqmm nominal size for earth continuity from main lines to the street light fittings after removing u/s one complete all as specified and directed by Engr-in-Charge.
XLPE insulated, armoured, aluminium conductor cable, 1100 volts grade, heavy duty, cross sectional area 10 sq mm ,2 core, laid in trenches/ducts/through pipe complete all as specified and directed by Engr-in-Charge.
All as per Srl item No 18 here-in-before but of size16 sqmm, 2 core.
All as per Srl item No 18 here-in-before but of size 16 sqmm, 4 core.
All as per Srl item No 18 here-in-before but of size 25 sqmm, 3.5 core.
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for laying of cables, foundation of poles, stays and getting out in any type of soil complete all as specified and directed by Engr-in-Charge.
Returning , filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engr-in-Charge.
Removing of excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engr-in-Charge.
Double walled corrugated pipe (DWC) of size 40 mm conforming to IS:14930(part-II)/IS 16205 Part II with necessary snap fit coupler complete all as specified and directed by Engr-in-Charge.
LED flood light, 120 watt, 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge. Make:-Polycab Cat No PCGLS C5 01 150W or its techno commercial equivalent in Wipro/Philips
LED flood light, 150 watt, 230 V, AC outdoor type with thermal management in multiple optics, powder coated, pressure die cast aluminium body with toughened glass visor, and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp,CCT 5700K, lumen efficacy not less than 110 lumen/watts (in repair) complete all as specified and directed by Engr-in-Charge. Make:-Polycab Cat No PCGLS C5 01 150W or its techno commercial equivalent in Wipro/Philips.
LED street light fitting with dusk down (sensor) 90 Watt, 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge. Make:-Polycab or its techno commercial equivalent inWipro/Philips.
LED street light fitting with dusk down (sensor) 60 Watt , 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge. Make:-Polycab or its techno commercial equivalent in Wipro/Philips.
LED street light fitting with dusk down (sensor) 60 Watt , 230 V, AC outdoor type with high pressure die cast aluminum hosing inverter backup and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection, CCT 5700K, lumen efficacy not less than 110 lumen/watts complete all as specified and directed by Engr-in-Charge. Make:-Polycab or its techno commercial equivalent in Wipro/Philips/Hellonix.
Post top lantern, LED, type 40 watt , 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant (in repair) complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP-66 protection complete all as specified and directed by Engr-in-Charge. Make:-Polycab Cat No PCGPT 01 40C or its techno commercial equivalent in Wipro/Philips.
LED bollard lights of 11 watt capacity including taking down existing unserviceable garden lights of any type/capacity complete all as specified and directed by Engr-in-Charge. Make:- Wipro/Philips/Polycab.
Outdoor wall light of 6 watt 2700K, premium design voltage range 100-265 V AC with unidirectional symmetric light beam with surge protection up to 2.5 KV and with dimension 80x66x75 mm complete all as specified and directed by Engr-in-Charge. Make:-Wipro/Polycab/Bajaj/Havells
50 Watt LED system suitable for Post top fitting,system made out Aluminium dia cast ,power LED3000 K mounted on MCPCB single piece lense,Better heat desperation,external LED driver low and high cut complete all as specified and directed by Engr-in-Charge. Make:-Polycab Cat No PCGPT 01 40C or its techno commercial equivalent in Wipro/Philips/HI-LITE. Note: For item Serial no 26.00 to 34.00 (a) MS clamp,Brackets required for fixing of fitting are inclusive of rate quoted. (b) Necessary grouting/making good on existing surfaces in inclusive of rate quoted. (c) GI pipe of required dimensions if required at site shall be provided by the contractor.
MCCB 4 pole ,Ics=100%Icu- 25 KA, 415 Volts, 63 Amps (in replacement) ,with thermal adjustable and fixed magnetic setting with extended terminals suitable for isolation complete all as specified and directed by Engr-in-Charge. Make:- Schneider Cat No. :- LV510315 or as equivalent in Havells/LEGRAND.
MCCB 4 poles ,Ics=100%Icu- 36 KA, 415 Volts, 100 Amps (in replacement) ,with thermal adjustable and fixed magnetic setting with extended terminals suitable for isolation complete all as specified and directed by Engr-in-Charge. Make:- Schneider Cat Part No. LV510347 or as equivalent in Havells/LEGRAND.
Polycarbonate globe with gallery 242mm dia (in replacement) round suitable for retrofit LED lamp B22 Base (in replacement) complete all as specified and directed by Engr-in-Charge.
Polycarbonate globe with gallery 300mm dia round suitable for retrofit LED lamp B22 Base (in replacement) complete all as specified and directed by Engr-in-Charge.
GI tubing, light grade, 50mm bore including necessary clamps for the protection of the cable ,laid in trenches/under road/path complete all as specified and directed by Engr-in-Charge.
Lamp holder (in replacement) PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge.
Lamp holder (in replacement) PVC/polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed by Engr-in-Charge.
Ceramic lamp holder E-27/40 with electrical grade silver plated contacts as required ,suitable for 150/250/400 watt HPSV lamp complete all as specified & directed by Engr-in-Charge.
LED lamp warm white/white 5 Watt (in replacement) complete all asspecified and directed by Engr-in-Charge. Make:- Syska Cat Pt No- SSK-PAG-5W-2 IN 1 or as equivalent in Bajaj/Philips/ Polycab.
LED lamp warm white/white 9 Watt (in replacement) complete all as specified and directed by Engr-in-Charge. Make- Syska Cat Pt No- SSK-PAG-9W-2 IN 1 or as equivalent in Bajaj/Philips/ Polycab.
LED lamp warm white/white 18 Watt (in replacement) complete all as specified and directed by Engr-in-Charge. Make:- Syska Cat Pt No- SSK-PAG-18W-2 IN 1 or as equivalent in Bajaj/Philips/ Polycab.
Incandescent bulb of 60/100 Watt (in replacement) complete all as specified and directed by Engr-in-Charge.
MCB SPN -32 Amp, 230V, 50Hz, 10 KA (in replacement) complete all as specified and directed by Engr-in-Charge. Make:- Indo Asian, Cat No.:- 811034 or equivalent in Havells,C&S.
MCB SP-25 Amp, 230V, 50Hz, 10 KA, (in replacement) complete all as specified and directed by Engr-in-Charge. Make:- Indo Asian, Cat Part No.:- 811013 or equivalent in Havells/C&S.
MCB TPN -63 Amp, 230V, 50Hz,10 KA (in replacement) complete all as specified and directed by Engr-in-Charge. Make:- Indo Asian, Cat No.:- 811013 or equivalent in Havells/C&S.
Supply and erecting steel tubular swaged poles erected to truly vertical or planted as strut complete with 6mm thick mild steel base plate(300mmx300mm), welded to pole, finial taper plug, bolts, nuts, and screws. Poles made out of ERW MS tubing conforming to IS-2713 Part-II Type 410 SP-37, 9.5mtr long including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminum paint over a coat of red oxide zinc chrome primer and with two coats of black bitumenous paint internally and portion embedded in concrete, making five black & white bands at lower portion of pole each 300mm wide alternately upto the height of 1.5 m and marking pole No. with black paint at suitable height including making two nos holes of suitable size in steel tubular pole by gas welding for passing PVC cable connection from junction box to security lights through pole where junction box to be fitted in pole complete all as specified and directed by Engineer-in-Charge. Note: - Excavation, Earth Work and PCC in foundation shall be measured and paid for separately.
Plain cement concrete M- 7.5, (1:4:8), type D-2 (using 40mm graded crushed stone aggregates) as in foundation complete all as specified and directed by Engr-in-Charge.
Plain cement concrete, M-15, type B-0 (using 12.5 mm graded crushed stone aggregates) as in coping complete all as specified and directed by Engr-in-Charge.
proach associates
vijay kumar gupta and co
MOHAN LAL AND SONS
FANGALIA TRADERS
PREM NATH KHAJURIA AND SONS
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .