ADDN/ ALTN AND SPECIAL REPAIRS SELECTED OLD ACCN IN WING I AND V (RECT LIVING) AT ARTY CENTRE UNDER GE NASIK ROAD CAMP

Amount

Dismantling single layer Mangalore or similar tiles including ridges with tile battens in roofing all as specified and directed.

Dismantling of unframed work fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete alll as specified and directed .

Dismantling asbestos cement (corrugated, semi corrugated) sheets in roof covering

S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and making good to wall and roof joint.

S & F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutter, drip and straight flashing.

Dismantling wrought iron or mild steel work of any description not otherwise provided for including gas cutting, welding etc.

S&F rolled mild steel Joist, channel, angle, flat sections, fixed independently, without connecting plates, mild steel tubular sections etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) grade Fe 290( E-165) all as directed by Engr-in-charge

M&L prepairing new steel and iron surfaces, exc 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer.

Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed

M&L Screed bed or bedding layer 20 mm thick cement mortar 1:6. for laying floors finishes.

M&L for machine cut kota stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed. Notes:(i) Screed bed shall be measured and measured seperately. (ii) Kota stone slabs for treads and risers shall be in one piece of required size as directed by Engineer- in - Charge.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate) in sub-floor for laying floors finishes.

M&L Screed bed or bedding layer 15 mm thick cement mortar 1:6. for laying floors finishes.

M&L full body vitrifide heavy duty tiles (ight shade), 600 x 600 x 09 to10mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specifide and directed.

all as per item above but in skirting/dado.

S & F machine cut cudappa stone slab 16-18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Note: Screed bed shall be measured and measured seperately.

M&L granite (of any type)work (table rubbed and polished) 18 mm thick in steps, jambs, pillars, cooking platforms and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite

Rounding edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M&L for 25/30mm thick rough dressed Shahabad Stone I flooring/Plinth set and jointed in neat cement slurry and pointed in cement mortar 1:4 complete all as specified and directed. Note: Screed bed shall be measured and measured seperately

ditto all as per item no 16 above but except stone in cement mortar 1:3.

Demolition of brick work or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillers etc but including ashlar facings, dressed stone work and precast concrete articles

M&L brick work with fly ash bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 with old size bricks.

M&L brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 with old size bricks.

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc. including removing all the debris out side MD land

M&L for rendering 5 mm thick (1: 3) on fair faces of concrete surfaces incl preparation to new surfaces on ceilings finished even and smooth without using extra cement

M&L for rendering 15 mm thick on stone surfaces or other than fair faces of brick work or concrete surfaces in cememt mortar 1:4 rendering is to be finished even and smooth without using extra cement adding water proofing compound 3% by weight of cement (water proofing compound shall be measured and paid separately)

M&L for cleaning of existing wall surfaces including preparation (i.e. brooming down plastered / unplastered surfaces complete) and applying one coat of Acrylic weather proof exterior paint over water based primer(Make: APEX of Asian Paint or equivalent) complete all as specified and directed.

M&L for rendering 15 mm thick (1: 6) on stone masonry or surfaces other than fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement

Supply only intergral water proofing compound

M&L Preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces all as directed

M&L for preparation of newly plastered surface of wall and applying two coats of Acrylic weather proof exterior paint over water based primer(Make: APEX of Asian Paint or equivalent) complete all as specified and directed.

S&F in repair stainless steel sink made of stainless steel 1mm thick with out drainage board including plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing contilever brackets and connecting union to pipe overall size 495mm x 420mm, bowl size 410mmx330mmx160mm complete all as specifed and directed

Dismantling wall and ceiling boards( Fibre, pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified & directed.

S&F interlocking aluminium powder coated snap grid consists of main Tee runners of size 38mm x 25mm x 1.00 mm spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x1.00mm, 1200 long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross Te 25mm x 25mm x 1.4mm (of length 600mm) to be interlocked of the centre of 1200mm x 600mm panel to form a grid of 600mm x 600mm and wall angle 25mm x 25mm x 1.5mm . Aluminium alloy extruded section shall be aluminium anodized ( minimum 15 micron) and shall conform to IS 733, IS 1285 and IS 737, and providing and fixing with Hangers of 4mm dia GI (upto 1200mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long size of grid 600 x 600mm complete all as specified and S&F non asbestos cement building board 4mm thick of make E board classic of M/s Everest industries Ltd or equivalent make as approved, “in ceiling fixed with screw as per manufacturer instruction”

M & L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 with WPC @ 3% of cement mass by using Ditachment DM 1% by weight of cement and surface made smooth after curing period two coat of Ditachment DS shall be applied @ 2.50Kg/Sm. The paste like consistancy like is made by using 2.5Kg of Ditachment DS powder in one lit of admixture (The admixture volume of water) After 7 days curing, testing shall be done by flooring for 72 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall Detachment DS. All joints of CI pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement 32mm dia 450mm long GI spout light grade shall be provided in all sunken slabs to drain off water.

S&F in repairs Vitreous china squatting pan ,'Orissa' pattern, size 580x440 mm white,with integral foot rests (excluding flushing cistern and flush pipe)

S&F of PVC(SWR) 'P' trap of 125/110 mm bore

Dismantling floor hearth or wall tiling including cement mortar bedding (But not backing) removing serviceable tiles to store and rubbish off the premises.

M&L for 10 mm thick rendering in cement mortar 1:4 on brick masonary or concrete rough finished surfaces as backing coat

M&L for coloured glazed ceramic tiles 300 x 450 x 7-8mm thick in vertical surface, set and jointed in neat cement slurry & pointed with white or coloured cement to match

M & L for 15mm thick Screed bed or bedding layer in cement mortar 1:6 for laying floors finishes

M&L non-skid coloured ceramic tiles 7 to 8mm thick square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile all as specified and directed by Engr-in-charge

S&F in repairs bib taps standared of PTMT 15mm bore dia any colour high presure screwed for iron pipe of Make Prayag fixed (minimum weight 90 gms) complete all as specified and directed

S&F in repairs PVC valveless,symphonic action type,flushing cistern ,low level white,with inlet,ball valve,float and handle including brackets of 10 ltrs inclluding flush pipe of polyethelene of low or high dencity or PVC, 32 mm dia all as specified and direcetd.

S & F PVC connections 15mm size with PTMT nuts of length 450mm.

S &F Vitreous china bowl urinal flat back ,size of 465x355x265 white (minimum),with grating and union for discharge pipe (excluding flushing cistern,flush pipe and waste pipe)

S&F 40mm size waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.

S&F waste coupling of PTMT (half or full threaded), 32 mm bore dia (Min weight 45 gms) (half or full threaded) suitable for urinals

S&F in repair stop valve, 15mm bore dia PTMT of any colour high pressure screwed for iron pipe and fixed (Minimum weight 90 gms) complete all as specified and directed

Taking up or down tubes galvanized iron and connections and fittings or removal from site as incl cleaning for refixing where directed complete all as specified and directed.

(a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

Re-fixing only tubes galvanized iron and connections fixed to walls or laid in floor supplying & fixing new fittings such as socket, bends, elbows nipple, union etc all as specified and directed of size complete all as specified and directed

(a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

S/F for tubes medium grade, galvanized with iron all fittings fixed to walls, ceiling and laid in floor of sizes complete all as specified and directed :-

(a) 15 mm dia

(b) 20 mm dia

(c) 25 mm dia

S&F of PVC(SWR) pipes single socketed,in any length with rubber ring joints fixed to walls in repairs.

(a) 75 mm dia

(b) 110 mm dia

S&F of PVC(SWR) bends of any radius in repairs.

(a) 75 mm dia

(b) 110 mm dia

S&F of PVC(SWR) branch piece,single(single Y) equal or unequal in repairs.

(a) 75 mm dia

(b) 110 mm dia

S&F of PVC(SWR) junction single,(single T),equal or unequal in repairs.

(a) 75 mm dia

(b) 110 mm dia

S&F of PVC(SWR) Vent cowl in repairs.

(a) 110 mm dia

(b) 75 mm dia

S&F 50mm dia low density polyethylene pipes(LDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls as directed by Engr-In-Charge

S&F PVC(SWR) floor trap,plain with grating including jointing with solvent cement

Taking down carefully existing bitumen tarfelt incl. Screed and cleaning of surfaces of roof etc. With wire brush incl. Flashing and junctions of parapets/kerb walls etc. removing rubbish to a distance exc. 500 metres but not exc. 1.5 km and deposting where directed.

M&L Plastering 15mm thick in cement mortar (1:4) on concrete surfaces mixed with water proofing liquid and smooth finished and smooth(without using extra cement).

M&L Waterproofing on roof including flashing and junction of parapet, kerb, wall etc. as under :- (a) Applying bituminous primer on cleaned and dried surface @ 0.2 kg/sqm. (b) Laying by thermo fusion ( torch applied) 3 mm thick APP based polymeric water proofing membrane weighing not less than 3.5kg/sqm and reinforcement with polyester non woven fabric ( not less than 150 gms/sqm) (c) Painting the exposed APP membrane surface with bituminous paint @ 0.15kg/sqm

Taking down of shutters of any description exc 1.00 sqm and n exc 2 sqm each shutter complete all as specified and directed

Taking down chowkat or frames with shutters (without taking off shutters from the frame not exc. 1.5 Sqm each.

Taking down chowkat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4 sqm each.

S&F aluminium anodised powder coated (min thickness 50 microns) frame for doors, windows, ventilators, complete all as specifed and directed

Aluminium anodised powder coating of any colour (thickness or powder coating not less than 50 micron) door shutters aluminium section weighing 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised aluminium snap beading, screws etc complete all as specifed and directed

Aluminium anodised powder coated of any colour window and ventilator shutter, sliding type without sash bar, aluminium section weighing 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specifed and directed

S&F Sheet glass ordinary quality 5 mm thick, tinted glass, exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

S&F Sheet glass ordinary quality 4.0 mm thick exc 0.5 sqm each pane with Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specifed and directed

S&F floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring of 140mm size fixed in floor complete all as specified and directed.

S & F Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 oto 1000 mm in width and of weight between 61 to 80 Kg.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube S&F in opening as per specification and drawing.

S&F factory made soild panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

S&F Stainless steel butt hinges 100mm size medium weight complete all as specified and directed

S&F aluminium alloy barrel tower bolt 150 mm long

S&F 150 mm aluminium alloy handels cast/plate type

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, sup-plied and fixed

S&F IInd class hard wood factory made Glazed and ske- leton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (divided in to square with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mi-tred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Sec-tion 8, cla-use 8.20 (a); supplied and fitted to chowkats.

S&F IInd class HW 35mm thick plain framed factory made panelled shutters (two panel) with lock rail, panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Part I) Kiln, Seasoned and chemically pressure treated.

S & F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (b)

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F aluminium alloy anodised sliding door bolt 300mm long with hasp & staple (bolt type) and fixing chops of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alluminium alloy and fixed

S&F Aluminium alloy anodised barrel tower bolts 200mm long

S & F 50 mm long medium weight, cold rolled mild steel Butt hinges.

Supply & Fixing 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed by EIC.

S & F Stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples.

S&F double action spring hinges mild steel with steel wire spring stove enamelled black, 150mm long, fixed in repair

S & F Aluminium plate type II Gate and shutter, hook & eye 200 mm size

S&F in repairs 1st class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each

S&F 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed to any frame work including beads complete all as directed.

S&F 75mm size Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

Disconnecting existing tanks of exc 500ltrs but n. exc 1000Ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Dismantling water tanks of size exc 500Ltrs but n. exc 1000Ltr and removing to store

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

(a) 1000 Ltrs Tanks

(b) 500 Ltrs Tanks

S&F 25mm bore dia Nipple suitable for HDPE water tank. (Minimum weight 25mm- 65gms)

S&F 25mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F Sheet glass ordinary quality 3.00 mm thick n. exc 0.5 sqm each pane complete all as specifed and directed

M&L for rubber moulded machine pressed precast inter locking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directd

M&L 75 mm thick PCC 1:4:8, type D-2(using 40mm graded stone aggregate)as in sub base .

M&L for Rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with mixture of white and gray cement in equal proportion and no pigment in floors complete all as specified and directed.

S&F Providing precast cement concrete type C1, 1:3:6 (20mm graded stone aggregate) in window or door cills, lintels, bressumers, steps,quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, Kerb stones etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match with CM 1:6 complete all as specified and directed.

M&L for preparation of old painted surfaces of plaster, stone , brick concrete of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint (Ordinary tint) complete all as specified and directed.

M&L for preparating newly plastered surfaces of walls and applying two coats of OBD over one coat of chalk whitning, prepatory to distempering with birla putty complete all as specified and directed.

M&L for complete removal of existing treatment on walls and applying a layer of wall care putty, primer coat as preparatory to distemper and two coats of distemper oil emulsion white or tinted complete all as specified and directed.

M & L for preparing old decorated surfaces and applying two coat of white wash on surface of ceilings.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F mild steel sheet eaves gutters, galvanised class 3, 1mm thick sheet and half round 150mm dia with rounded edges complete all as spcified and directed.

Demolition of cement concrete (unreinforced) of any description and any position not otherwise specially provided for

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) of any description and any position not otherwise specially provided for

M& L for providing cement concrete type B1 1:2:4 (20 mm graded aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F mild steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to TMT bars.

Ditto, as per item above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate) in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc

S&F in repairs tubular rail curtain rod/towel rail, 20mm dia, brass chromium plated complete all as specified and directed .

S&F for brass chromium plated brackets for 20mm dia tubular curtain rod/towel rail complete all as specified and directed .

S&F in repairs Vitreous china wash down water closet (pedestal pattern), white, including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed by .

S&F 4mm dia plain mild steel wire, galvanised class 3, in detached work such as mosquito nets with straining bolts, hooks, eyes etc complete all as specified and directed .

S&F in repairs gun metal globe or gate valves, with iron wheel head, screwed both ends for 25mm bore iron pipe complete all as specified and directed .

S&F in repairs PVC waste pipe 32/40mm dia for Urinal/Sink complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc

Taking down unserviceable/partly serviceable light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes.

Taking down and hanging during point wiring of ceiling fan/exhaust fan of any size and sweep in proper manner and connecting up including provision of cable from ceiling rose or connector to fan all as per specified and directed by Engr-in-Charge

Dismantling unserviceable main switch/DBs with MCBs and wooden board including making good disturbed surface of wall.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces.

M&L Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified .Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.

(a) One light point controlled by one, one way switch

(b) One ceiling /exhaust fan point controlled by one switch and regulator

(c) One 3 pin 5 amp socket out point on the same board with other switches.

(d) One3 pin 5 amps socket out let point on independent board

All as per same in item above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.

S &F Switch piano flush type single pole one way 5 amps.

S &F Socket out let 2 in one, 5/3 pin 5Amp

S &F Switch socket combination 5 Amps 5 pin flush type

S &F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal .

S &F Ceiling rose, surface bakelite 65x50 mm three terminal

S &F Electronic regulator 100/120 Watt step type

Supply and fixing in repair of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED bulb 9 watt.

S & F 20 Watt Batten (4 feet) suitable for LED T8 lamps including coneecting up with 2 core flexible coppper conductor cable and mounting clamps & PVC squre box 75x75mm - 2 Nos etc, all as specified and directed by Engr-in-Charge.

S & F 20 Watt LED Tube Light (4 feet) suitable for T8 Batten including provision of suitable type of bipin holders- 02 Nos for each fitting, internal wiring of old fitings/fixtures if required, all as specified and directed by Engr-in-Charge

Supply & fix LED tube light along with fixture,10 W, 2 Feet including coneecting up with 2 core flexible coppper conductor cable and mounting clamps & PVC squre box 75x75mm - 2 Nos etc, all as specified and directed by Engr-in-Charge .

Refixing of tube light from exisiting position to new position as required at site all as directed and specified . (Note:- The old serviceable fittings will be used as removed against item above)

Supply and fix LED security/street light 25 W IP 65 , including coneecting up with 2/3 core flexible coppper conductor cable , compete all as specified and directed by Engr-in-Charge.

Fabrication,supply & fixing of GI pipe bracket up to 40 mm dia- 0.9m long & 2 set of clamps made out of 30x5mm ms flat & fixed with anchor bolt suitable for 25 W LED security light fitting

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver including 3 core copper cable & cutting holes if required etc. Make - Havells / Bajaj/Usha.

Material and labour for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm, earth continuity conductor of size 2.5 Sqmm to be drawn through and including PVC CASING CAPING not less then 20mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 2.5 sqmm and one wire of 2.5 sqmm for earthing and one run of PVC casing/caping shall be measured as one unit.

Material and labour for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sqmm, earth continuity conductor of size 4 Sqmm to be drawn through and including PVC casing capping not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 4 sqmm and one wire of 4 sqmm for earthing and one run of PVC casing capping shall be measured as one unit.

Material and labour for sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sqmm, earth continuity conductor of size 6 Sqmm to be drawn through and including PVC CASING CAPPING not less then 32mm dia medium Grade fixed on walls/roof/floors all as directed by Engineer in Charge. Notes:- Two wires of 6 sqmm and one wire of 6 sqmm and one run of PVC casing capping shall be measured as one unit.

S & F 4 way MCCB powerline vertical DBs in double door suitable for TP/FP MCCB, bus bar with current rating capacity upto 160A, IP-43-IK09 protection grade complete all as specified and directed by Engr-in-Charge,

S & F in repair for MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415 Volts TPN with 4 way Double door including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed

S&F in repair Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed.

S & F in repair, MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail , 240Volts SPN with 8 way Double door , IP-43-IK09 protection grade including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed

S & F in repair MCB DB made of sheet steel enclosures with detachable gland plates for flush/surface mounting with bus bars, neutral links and earth bar (without mcbs) , 240Volts SPN with 6 way Double door , IP-42 protection grade including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed

S & F in repair MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 240 Volts SPN with 4 way Double door IP-43-IK09 protection grade including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed

Supply and fix for MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps

Supply and fix for MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps

Supply and fix for MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 32-40 Amps

Supply and fix for MCB SP 40-63 Amps 'C' series, breaking capacity 10 KA of rating

Supply and fix for MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating

S & F MCCB TPN 63 Amps , 415Volts, 25KA ,4 pole.

S & F MCCB TPN 100Amps , 415Volts, 25KA ,4 pole.

M&L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick buried directly in gound (Earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and earht strip protected by provision of GI light grade pipe 15 mm light grade bore including provision of pit in PCC (1:2:4) type B-1 using 20 mm graded of stone aggregate with PCC cover including 20mm bore pipe for wetering perforated at bottom 1.75 mtr long placed on top edge of earth plate common salt and charcoal (not less than 40 Kgs, 80 Kgs each) filling with fixing arrangement funnel wire mesh and earth work in hard dense soil returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electircal plate No 03 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion.

Anand Trading Co

DARSHAN CONSTRUCTION Co.

Samruddhi Construction

KHANDELWAL ASSOCIATES

AGRAWAL ASSOCIATES

shah construction

Nexus Infratech