Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.6 LAccepted-AOC BMC 1 54 GANTI NETAJI PALLY PO GANGANAGAR KOLKATA 700 132 INDIA | 24 PARAGANAS NORTH | WEST BENGAL | 700132 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹36.0 L+₹1.9 L (5.51%)Rejected-Finance | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹36.1 L+₹2.0 L (5.92%)Rejected-Finance GC ROAD ABDUL LATIF ROAD PO TITAGARH KOLKATA 700119 | 24 PARAGANAS NORTH | WEST BENGAL | 700119 | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹37.5 L+₹3.4 L (9.98%)Rejected-Finance 15 1 1F MAYUR BHANJ ROAD POLICE STATION EKBALPORE KOLKATA 700023 | KOLKATA | KOLKATA | WEST BENGAL | 700023 | L4 | Rejected-Finance Being higher bid value |
Tender Value
₹33.5 L
EMD Value
₹66,900
Closing Date
1 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
ADDN/ALTN TO BLDG NO P- 19, ADDN/ALTN TO BLDG NO P- 32 AND TOILET, PROVN OF GALVALUME ROOF SHEET COVERING IN LIEU OF OLD BROKEN TRONSULENT SHEET AND OTHER BR WORKS IN MT SHED AT HQ BENGAL SUB AREA AND PROVN OF 02 X STORE ROOM 14 X 12 FOR STORAGE OF C
2023_MES_611320_1
GE/ALP (8266B) KOLKATA OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE ALIPORE KOLKATA
Class D and category a (i)
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER ALIPORE
₹66,900
Yes
GE ALIPORE KOLKATA
10 Oct 2023
31 Jul 2023
8 Sept 2023
31 Jul 2023
1 Sept 2023
14 Aug 2023
31 Jul 2023 - 7 Aug 2023
8 Aug 2023
Amount
Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Taking down chowkhat or frames with shutter not exc 1.5 Sqm each (without taking of shutters from the frames) complete all as specified and directed.
Taking down chowkhat or frames with shutter exc 1.5 Sqm but n.exc. 4 Sqm each (without taking of shutters from the frames) complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches, pillers etc complete all as specified and directed.
Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation or for shafts, wells, cesspits, manholes, pier holes, laying of cable or fixing of pole, etc. n.exc 10 sq m on plan and n. exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.
Removing excavated soil material to a distance exc1.5 km but n.exc. 5 km and depositing where directed complete all as specified and directed.
Dismantiling of floor hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises (out of MOD land), complete all as specified and directed.
Dismantling of ceiling boards any thickness including cover fillets complete all as specified and directed .
Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal complete all as specified and directed.
M&L for brick work with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exceeding 6 mtr mean radius complete all as specified and directed.
M&L for brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.
M&L for rendering 15mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick, set in cement mortatr (1:4), as on brick/concrete surface etc finish even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick with CM (1:3) on or concrete surfaces and finished the surface even and smooth as in ceiling complete all as specified and directed.
Material and Labour for two coats of weather proof exterior emulsion paint on old surface or previously untreated surface of external walls including preparation to remove all foreign materials including necessary working platform complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.
S&F for 3mm thick wall care putty on wall/ceilling complete all as specified and directed.
M&L for preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coats of oil emulsion distemper over a coat of primer to match with the new suface on wall/ceiling complete all as specified and directed.
Material and Labour for two coats of weather proof exterior emulsion paint on new surface or previously untreated surface of external walls including 3mm thick wall care putty preparation to remove all foreign materials including necessary working platform complete all as specified and directed.
M&L for double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in floor etc. set and jointed in neat cement slurry and pointed white or coloured cement to match the shade of the tiles laid over screed bed complete all as specified and directed .
M&L for screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed.
M&L for double charged vitrified ceramic coloured tiles 8-9mm thick (square /rectangular ) polished area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neat cement slurry and pointed white or coloured cement to match the shade of the tiles laid over complete all as specified and directed .
M&L for backing coat/screed bed or bedding layer of 10 mm thick in cement mortar (1:3) as in dado/skirting complete all as specified and directed.
M&L for non-skid coloured ceramic floor tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to to match the shade of tiles complete all as specified and directed. (Note:- Screed bed shall be measured and paid seperately under respective item of BOQ).
M&L for glazed ceramic coloured wall tiles of size 450x300x6mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. (Note:- Screed bed shall be measured and paid seperately under respective item of BOQ).
M&L for cutting chases, pinning, in making good to facing where required of brick wall and pointing in cement motrar (1:3) to ends and cutting chases for concealed water tubing and concealed conduit wiring etc and making good surfaces complete all as specified and directed.
Supplying and laying for 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed
Supplying and laying for 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/walls including all fitting in any grade complete all as specified and directed
S&F for 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.
S&F in repairs 15mm bore brass CP bib cock fancy type with crutch or butterfly handle complete all as specified and directed.
S&F in repair 15mm bore brass CP angular stop cock concealed type with crutch or butterfly handle complete all as specified and directed.
S&F in repair PVC connection 15 mm size pipe with PTMT nut of length 450mm complete all as specified and directed.
S&F in repairs vitreous china wash basin ( white), flat back, size 580 x 450 mm, excluding taps, waste,chain and plug and porcelain stoppar but including brackets, complete all as specified and directed.
S&F for 40mm bore CPVC pipe with fittings complete fixed in wall/laid in floor complete all as specified and directed .
S&F for 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
S&F for 32 mm bore brass CP bottle traps for wash basin with inlet and outlet screwd for pipe and connections including necessary packing complete all as specified and directed.
S&F in repair 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair towel rail of brass chromium plated tube 19 to 20 mm dia 600 mm long `D' type complete fixed in repairs with brass chromium plated screw complete all as specified and directed.
S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, white colour, low level, white with inlet, ball valve, float and handle including brackets duly painted, 32mm dia PVC flush pipe complete all as specified and directed.
S&F for 75 mm diameter of outlet of PVC(SWR) floor trap,plain with grating including jointing with solvent cement complete all as specified and directed.
M&L for 25mm thick PCC (1:2:4),type B-1 ( using 20 mm graded crushed stone aggregate) as in sub base of floor complete all as specified and directed.
S&F for solid PVC mouded door frame of size 50mm x 47mm made out of 5mm moulded/printed PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F for factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with partical board core complete all as specified and directed.
S&F for 200 mm long aluminium anodised, barrel tower bolts of extruded section all as specified and directed.
S&F for 150 mm long aluminium handles, cast type, anodised complete all as specified and directed.
S&F for 100 mm long butt hinges medium weight cold rolled mild steel and fixed all as specified and directed.
S&F for Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with SS wire staples complete all as specified and directed.
Supplying and fixing for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barred iron doors, railings and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.( Design/shap approved by by Engineer-in-charge).
Material & labour for preparation of new steel and iron surfaces of any description area exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide and zinc chrome primer complete all as specified and directed.
S&F for 2nd Class HW Plain, solid, straight chowkats and frames, wrought framed rebated on the solid, rounded or chanfered, put together with glue pinned at joints all as specified and directed.
S&F for 30mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and directed.
S&F for 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alloy all as specified and directed.
M&L for two coats of synthetic enamel paint over a coat of pink primer area exc 10cm width or girth over new wooden surfaces including preparation of surface complete all as specified and directed.
M&L for 25x4mm size mild steel flat iron as in hold fast conforming to Fe-290 Gde E-165 complete all as specified and directed.
Supply & fixing in repair wash down water closet (pedestal pattern) including connection to drain (or outgoing pipe) and to flush pipe, PVC water closet seat cover heavy duty coloured closed pattern with flat bottom and cover and mild steel CP hinnging device etc. and making good the damaged surfaces complete all as specified and directed.
S&F in repair CP hand shower (faucet) with one meter flexible tube with wall hook complete all as specified and directed.
S&F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F for 25mm dia curtain rods decorative aluminium alloy with fixing brackets including taking down old pelmet box complete all as specified.
S&F for bracket dacorative type for curtain rods aluminium alloy complete all as specified.
Material and labour for 75mm thick PCC 1:3:6, type C-2(using 40 mm graded crushed stone aggregate) as in plinth protection and hard standing complete all as specified and directed.
M&L for 4mm thick non asbestos cement fall ceilling tiles of size 595 x 595 mm of approved design fixed with powder coated GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm), and powder coating GI wall angle of size (20mm x 20mm) suitable for mounting tiles of 595 x595 mm with 2 mm dia GI wire suspended including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrengement with grid of size 60 x 120 cm complete all as specified and directed.
S&F for 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed including taking down of existing water tanks and removing to store complete all as specified and directed.
S&F for water tank lid for 500/1000 Ltrs capacity PVC tank complete all as specified and diredted.
S&F in repairs power coated aluminium door shutter including door frame fixed including roller machine with rubber gasket, stopper, cleats, handles etc complete including aluminium door styles of size 80 mm x 38 mm x 2.00 mm and aluminium door section of top, bottom and lock rail shutter frame of 80 mm x 38mm x 3.00 mm including taking down old door with necessary all fittings complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.
M&L for hard core of gauge n.exc 63mm,deposited spread and levelled in layer n.exc 15cm thick watered and rammed to a true surface of broken stone boulders complete all as specified and directed. .
Material and Labour for PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.
Material and Labour for pre-polished cement concrete designed coloured pavement tiles glossy finish of size not less than 400 x 400 x 20mm thick or equivalent size as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
Taking down shutter exc1 Sqm but n.exc. 2 Sqm each complete all as specified and directed.
M&L for rendering 10mm thick with CM (1:3) on bricks or concrete surfaces and finished the surface even and smooth as in ceiling complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer with 3mm thick wall care putty on wall complete all as specified and directed.
M&L for preparation of old plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer with 3mm thick wall care putty on wall complete all as specified and directed.
M&L for preparation of new plastered surface of ceiling and applying two coats of white wash on new surface complete all as specified and directed.
M & L for cement concrete 1:3:6 (using 20mm graded stone aggregate), type C1 as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings/hold fast, kneelers, apex stones, bed plates, kerbs water troughs and the like including or chamfered angles and throating, complete all as specified and directed
S&F for PVC water closet seat cover heavy duty coloured closed pattern with flat bottom and cover and mild steel CP hinnging device complete all as specified and directed.
S&F 1000 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed including taking down of existing water tanks and removinging to store complete all as specified and directed.
S&F for powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 92.00mmX29.50mmX1.50mm and shutter of section 20mm X20mm X1.55mm ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and all as specified and directed.
M&L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.(upto 10 storey High of building)
Demolition of cement concrete in ground floor and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Dismantiling of translucent corrugated sheet in roof coverings and rubbish off the premises (outside of MOD land), complete all as specified and directed.
Dismantiling steel framed work or roof trusses complete all as specified and directed.
M&L for 75 mm thick PCC (1:4:8) ,type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.
M&L for PCC (1:3:6), type C-2 (using 40mm graded stone aggregate) as in walls or retaining walls, any thickness,size or shape including pilasters,buttresses columns,pillars, boundary pillar and post all as specified and directed.
M&L for PCC (1:3:6), type C-2 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span,cills,steps,railing upto 60 cm in height,coping,including weathering,slightly rounded or chamfered angles and throating all as specified and directed.
S&F for steel work in tabular truss and tubular post including special shaped washer etc complete using ERW or induction butt welded tubes conforming IS:1161-1979 grade St-240 complete all as specified and directed.
S&F for MS rolled section as in roof purlins, rafters and truss etc of MS pipe fixed with iron cleats along with nuts & bolts of required size or section or welded conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F for MS Plates (plaines or chequered) square cut or notched (forming holes with riveted,bolted attechment) GDE Fe 410-S all as specified and directed.
S & F for MS screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut,but lenth of bolt exc 5cm but n exc 10 cm complete all as specified and directed.
S&F for pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping srews all as specified and directed.
S&F for pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall for rain water pipe ,fixed with self tapping srews all as specified and directed.
Material & labour for preparation on new plastered surfaces of wall and applying two coats of anti-algae and anti-fungal exterior grade weather coat paint over a coat of primer (upto four storey bldg) complete all as specified and directed.
Material and labour for preparation of old steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer (upto four storey bldg) complete all as specified and directed.
Material & labour for preparation of old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds,etc and applying one coat of anti-algae and anti-fungal exterior grade weather coat paint (upto four storey bldg) complete all as specified and directed.
M&L for coloured rubber polished chequered tiles with grey cement and no pigment 30cm x 30 cm x 25mm thick , over and including 15mm thick screed bed in CM 1:6, set jointed and pointed in neat cement slurry in floors complete all as specified and directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc. complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.
M&L for RCC (1:2:4),type B1 (using 20 mm graded stone aggregate) as in beams, cantilevers,bressummers, lintels etc complete all as specified and directed.
M&L for RCC (1:2:4), type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for RCC (1:2:4), type B1 (using 20 mm graded stone aggregate) as in chhajja and in shelves and the like complete all as specified and directed.
M&L for mild steel TMT bars of 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and directed.
M&L for mild steel TMT bars of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L for preparing new decorated plastered surfaces or unplastered surfaces of wall, pillasters, cornices etc and applying two coats of acrylic distemper with 3mm wall care putty complete all as specified and directed.
M&L for preparing new decorated plastered or unplastered surfaces of ceiling, pillasters cornices etc and applying a coat of wall care putty with two coats acrylic distemper emulsion complete all as specified and directed.
Material & Labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed..
M & L for 18-20mm thick machine cut kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified.
M & L for 18-20mm thick machine cut kota stone slab jointed with grey cement slurry mixed with pigment to match the shade of the slab as in riser of steps, skirting, dado and pillar including rubbing and polishing over and including 15mm thick rendering bed in CM 1:6 complete all as specified and directed.
M & L for machine pressed precast coloured concrete interlocking paver block any shape and size(rubber moulded) confirming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and pigment complete all as specified and directed.
Material and Labour for 20 mm thick pre-polished cement concrete designed coloured cheuered tiles glossy finish as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
M&L for providing cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in benching concrete,coping ,hold fast etc complete all as specified and directed.
S&F for Powder coated aluminium sliding windows for (three tier) with shutter styles 40mm X 20 mm sheet thickness 1.5 mm two shutter glass and one shutter of wiremess consisting of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 100 mm X 44 mm X 1.5 mm thick section with or without rebate 5 mm thick tinted glass fixed with aluminum beads locking arrangements with each shutter including aluminum grill complete in all as specified and directed.
S&F for 1mm thick steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type etc complete all as specified and directed.
Supply & fixing for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/chadding to wall, fixed with self tapping screws complete all as specified and directed.
S&F for steel work in MS tubes (round/square) including special shaped washer, necessary flat iron angle if required to complete the works as in truss,purlins, rafter, stanchions etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 graded St-240 complete all as specified and directed.
Taking down carefully unserviceable aluminium/copper point wiring light/fan/socket or power complete and including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, energy meter, bracket /sketch fitting etc) and removing material from site and making good to the disturbed surface matching with existing specification complete. (Note:- all old materials have to kept & shown at site to the Engr-in-Charge after removal)
M&L for point wiring for one light/ bell/ fan controlled by one number one way switch for 5Amps SSC complete with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly including provn of modular type galvanized MS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover plate of suitable modules with fixing screws, for fixing of modular type switches / socket/ fan regulator etc. complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.
All as per item No. 119 here in before but for 5 Amps socket on same board complete all as specified and directed.
All as per item No. 119 here in before but for 5 A socket point on independent board complete all as specified and directed.
All as per item No.119 here in before but for 15 A socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.
All as per item No. 119 here in before but for AC point independent with 4.0 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.
S & F for ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V.
S & F for modular type switch, one way 6 Amps , 1 module complete all as specified and directed.
S & F for modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.
S & F for modular type socket 5 pin, 16 Amps 2 module complete all as specified and directed.
S & F for modular type switch, one way 16 Amps, 1 module complete all as specified and directed.
S & F for modular type fan regulator step type 2 module 120 Watt complete all as specified and directed.
Supply and fixing for MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed.
M&L for sheet metal enclosure MCB DB double door, triple pole & neutral 4 way with fully insulated 100 Amp bus bar for each phase complete all as specified and directed.
Supply and fixing for MCB TPN 40 Amp, 415 Volt "C" series, breaking capacity 10 KA complete all as specified and directed.
S&F for MCCB, thermal and magnetic release adjustable type, 4 pole, 40 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed.
Supply and fixing for AC power supply unit 6 module consisting of in built modular motor starter, plug top, 20 Amp socket and box duly fixed/grouted on wall complete all as specified and directed. Make : North West/Havells/Crabtree/Anchor
S&F for LED tube light fitting 4 ft 20 watt, 230 volt energy efficient comprises of extruded PVC housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.all as specified and directed. Make: Magik (CAT No- BWUA020C1293) or equivalent of crompton/Bajaj/Philips
S & F in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with inbuilt driver, suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size complete all as specified and directed. Make : Crompton , Cat No. : LCTLRNE-36-FO-CDL Havells (CAT No- VENUSNEOHE4x1PLR36WLED8576)/ Philips(CAT No- RC38BBLED36S-6500PSUOD WHPIR)/MAGIK (CAT NO-PCAC036N2016)
Supply and fixing for LED street light with IP 66protection and front toughen glass luminaries of capacity 45 watt with high power LED and ensure uniform light distribution complete all as specified and directed.
S&F for wall mounted fan of sweep 400 mm elegently desined of round shape with pull cord control for speed and oscillation complete all as specified and directed.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connected with galvanised strip of size 32 x 6mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded stone aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and directed.
S&F for 50mm bore GI pipe 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed
Materials and labour for sand filling under layer of floor or around the cable with approved quality coarse sand for sand cushioning of under ground cable including spreading and punning down to desired thickness complete all as specified and directed .
Supply and laying for under ground heavy duty XLPE insulated, armoured aluminium conductor cable 1100 volts grade, cross-sectional area 16 sq. mm 4 core in trenches / through pipe in road crossing / plinth/ drain/ duct/ floor along pole / wall /ceillings etc after and including disconnecting and taking out existing unserviceable cable complete all as specified and directed. Note:- Earth work, bricks protection, sand cushioning shall be measured and paid seperately.
Supply and laying for burnt brick sub class 'B' of size 25 X 12.5 X 7.5 cm locally available best quality laid in trenches for protections of under ground cable complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level , not exceeding 1.5 metre above the starting point complete all as specified and directed.
S & F for call bell musical door chrome AC 230 volts single pole (Ding dong Type) complete all as specified and directed.
S & F for modular type 5 Aamp bell push switch complete all as specified and directed.
Taking down and refixing of LED Tube light after repair/replacement of point wiring and all as specified and directed.
All as per item No 147 above but LED tube light of 2 ft and 1 x 10 Watt LED lamp complete all as specified and directed . Make : Crompton/ Havells/ Philips/ Bajaj.
S & F for LED mirror light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with inbuilt driver and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make- Magik (Cat No- BWMP010C)/ Crompton (Cat No- CCS-103-10-65-SL-DP-NWH)/Havells(Cat No- LUMILINE BS10WLED865SPCWH)
Supply and fixing for TPN 4 way double door MCCB DB, IP43 including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed .
Supply and fix as in repair SPN MCB DB 8 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB's 240 volts double door type including taking down old one and making good the disturbed surface complete all as specified and directed. Make :
Supply and fixing for MCB 06 Amps to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed.
Material and labour for of sub-main wiring with two runs of 1100 V grade FRLSH PVC insulated & unsheathed 6.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 6.0 Sqmm 1100 V grade PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through conceled PVC conduit complete all as specified and directed. : (i) Three runs of 6.0 Sqmm cable shall be measured as one length.
Taking down and refixing after repair of E/M & B/R Works complete all as specified and directed.
M & L for making hole on wall for exhaust fan of size 300mm and making good distrubed surface all as specified and directed.
Supply and fix for exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.
S & F Piano switch flush type single pole one way 5 Amps, 230 V.
S & F Socket flush type 2 in 1, 5 Pin, 5 Amp. .
M&L for Sheet metal enclosure MCB DB double door, SPN 4 way with fully insulated 200 Amp bus bar for each phase all as directed by Engg-in-charge.
Supply and laying for under ground heavy duty XLPE insulated, armoured aluminium conductor cable 1100 volts grade, cross-sectional area 6 sq. mm 4 core in trenches / through pipe in road crossing / plinth/ drain/ duct/ floor along pole / wall /ceillings etc after and including disconnecting and taking out existing unserviceable cable complete all as specified and directed by the Engr- in- Charge. Note:- Earth work, bricks protection, sand cushioning shall be measured and paid seperately.
JAY MA TARA TRADERS
KWALITY CONSTRUCTION
DIPAK ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .