PROVN OF BATHROOMS AND TOILETS FOR TRANSIT JCOS AT 281 TRANSIT CAMP UNDER GE P LOHITPUR

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out (a) Soft/Loose soil

Excavating over area, not exceeding 1.5m in depth and getting out (a) Soft/Loose soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm. (a) Soft/Loose soil

Removing excavated material exceeding 250m but not exceeding 500 m and depositing where directed (a) Soils

M&L Cement concrete in foundations, filling and mass concrete Type D-2 1:4:8 (40 mm graded aggregate)

M&L Providing cement concrete in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item 4028, water troughs and the like including weathering, slightly rounded or chamfered angle and throating, as directed ("USING AT FLOORING") b) Type B0 1:2:4 (12.5 mm graded aggregate)

RCC in Foundations, including rafts, footings, foundation beams; basement slabs, under-reamed piles and mass concrete. Design Mix M 25 (20 mm graded aggregate)

RCC in plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete. Design Mix M 25 (20 mm graded aggregate)

RCC in Slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs and in shelves and the like. Design Mix M 25 (20 mm graded aggregate)

RCC in Beams, Cantilever,Lintel above 1.5m Design Mix M 25 (20 mm graded aggregate)

RCC in Columns, pillars, piers posts and struts. Design Mix M 25 (20 mm graded aggregate)

S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape reqired including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips

S & F Mild steel TMT bars 8 mm dia , cut to length, bent to shape reqired including cranking, bending spirally for hooping for columns hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips .

S & F Mild steel TMT bars 8mm &10mm dia and over, cut to length, bent to shape reqired , bending spirally and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips as in stirrups.

M&L Brick work with sub class B brick in half brick wall , built in cm 1:4

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. Rough finished surfaces of concrete a) Flat

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mmthick (Horizontal or sloping) Rough finished surfaces of concrete a) Flat

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilivers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. Rough finished surfaces of concrete a) Flat

Formwork to sides of pillars, posts, struts, piers, columns and stanchions Rough finished surfaces of concrete a) Flat

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide a) Flat

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

Factory made solid panel PVC door shutler 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered WiUl hea moulded plain colour PVC 'C' chrume having a PVC sheet sh'ip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. fraine welded / sealed to the stiles & rails with suitable PVC shee beading, and joined together with solven cement, suppling & fixing in the frame a site as per specification & drawing

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete

S&F Sheet glass ordinary type arae not exceeding 0.5m2 ,3MM thick for steel window.

M&L Cement concrete Type D-2 1:4:8 (40 mm graded aggregate) 75mm thick

M&L Cement concrete Type C-2 1:3:6 (40 mm graded aggregate) for plinth protection (75mm thick)

M&L Glazed ceramic tiles in vertical surface 450x350x7 mmthick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thk backing coat CM 1:3

Rendering 10 mm thick on fair faces of brick work or concrete surfaces c) Cement plaster 1:6

M&L Rendering 15mm thick other than fair faces of brick work or concrete surfaces (IN TWO LAYERS- 10mm+5mm) c) Cement plaster 1:4

M&L Rendering 5 mm thick on concrete surfaces ceiling of roof, chajja as in ceiling etc c) Cement plaster 1:3

M&L On walls - Preparing surfaces, plastered or unplastered, a) New surfaces

M&L Distempering walls with cement paint including preparation of new surfaces over alkali resistant primer.

M&L Distempering walls with two coats of OBD over a coat of alkali resistant primer including preparation of new surfaces .

supply only Integral waterproofing compound

M&L Hard Core broken to gauge not exceeding 63 mm deposited spred and levelled watered and rammed to desired level

Excavating in trenches, Soft/Loose soil not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10sq.m on plan and not exceeding 1.5m in depth and getting out

Removing excavated material exceeding 50m but not exceeding 250 m and depositing where directed

Returning, filling in, soft/loose soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm.

M&L Cement concrete Type D-2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete

Providing, cement concrete type B0 1:2:4 (12.5mm graded aggregate) in copings, haunching water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F sheet metal enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete including connection all as specified

S&F MCB 6 to 32 amps single pole complete all as specified

S & F MCB DP 63 Amps 240 volts 10 KA breaking capacity complete all as specified.

All as per item No. 88 above but for 4 modules

S&F sub main wiring two run of single core PVC insulated unsheathed stranded copper conductor of size 4 sqmm & one run of PVC insulated unsheathed stranded copper conductor of size 4 sqmm as earth lead drawing into riaid non metalic PVC conduit of size 20 mm dia including taking down old unsv. Note: Three run of 4 sqmm cable will be measured as single length

Cuting chases, pinning in, making good to facings where required and pointing in cement motar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth ail as specified and directed by Engineer-in-charge

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, therrmostate, NRV, Connection piece etc

Per point