Renovation of madanpuri park and Near arya samaj mandir park arjun nagar ward no 30 under zone II MCG.

Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of m.s pipe 2” and ¾” and vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer and PU Paints. Complete item with GST, Transportation, Installation with C.C and labor at site.

Providing and fixing Chain Swing - 2 seater ( Swing). Specifications Attached.

Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of m.s pipe 1” x 12 gauge and m.s rectangular pipe

Leg Press: Providing designing and fixing of leg press of size 2000x550x1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5mm thick. All pipes made up of hot rolled tubula

6 No. Ornamental Canopy Design FRP pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 15mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 89 mm and height 2890mm, the central m.s pipe having FRP capital sign enclosed. Complete pillar suitably grinded spray primered and subsequently

Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the G.I pipes are 40 mm dia and 2.5 mm thick all G.I pipes made up of hot rolled tubular steel and hot dipped

Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge.Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and a. .royal of arge regari ing materia , s ape of equipment,colour on metal, seat and

Rowing machine: Providing designing and fixing rowing machine of size 1280x800x1150 mm fabricated with main past of 114 mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber Foothold shall be made up of nylon alloy with rounded edges to prevent any impact or injury and base cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colourful and UV resistant and environmental friendly. Bearing used shall be maintenance free duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipments to be fitted with inbuilt limiters to

Specially Abled People Pull Chair with Cycle Combination Fitness Apparatus A pull chair, also known as a pull-wheelchair, combines the functionality of a standard wheelchair with a cycling feature, allowing the user to propel themselves using their hands on the rear wheels. Cycle-handicapped wheelchairs, on the other hand, are typically powered by hand cranks. a) All the equipment shall be Third Party Quality certified as per the specified standard. b) Nuts and Bolts- Stainless steel 316 and lock-nut c) Material – Galvanized steel Pipe cleaned by stand-blasting then coated with phosphate solution and finished with electro-static powder coating or other similar available material meeting the required standard d) Anti-rust Shoot blast /grit blasting of equipment to clean the rust Electrostatic powder coating technique To process the pipe surface e) Column the mild steel pipe column footing plate screw with a pull-burst, the surface rust acid decreasing cleaning phosphate rust. After a special process, throwing sand imported plastic powder with a double surface household- level spraying layer, electrostatic spray, high-temperature plastic 200 degree baking powder smooth surface UV resistant or as specified by the manufacture’s specification f) Seat and plastic LLDPE/HDPE metal with any protection / composite material with any protection infiltration of anti-static de-colorization element passing, strength, smooth surface, Security assurance weather resistant etc. g) UV-fully resistant specifications:-. Fabricated with main post of NB 100mm (G.I) “A” Class Pipe of approved make. Main frame of NB 65mm (G.I) “A” Class pipe. Handle support frame of NB 50mm (G.I) “A” Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Foothold made of NB 25mm (G.I) “A” Class pipe. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. IS 17801 2. ISO 18001 3. ISO 27001:2013 4. ISO 50001:2018 5. ISO 13485:2016 6. ISO 45001:2018 7. ISO 14001:2015 8. ISO 9001:2015 9. ISO 14001:2004 10. ISO 9001:2008 11. EN 14904 12. EN-1176-1-2017 13. EN 16630:2015 14. EN 16630 15. EN 957 16. EN 9100:2016 17. EN 11630:2017 18. GS 19. DIN 18032.2 20. DIN 79000-2012 21. CE Certificate 22. CE 11993 23. OHSAS 18001:2017 24. SLBR 62 25. BIFMA 26. GMP 27. RoHS The equipment must accompained with Test report for Quality, Safety, Durability and Proper Functioning of Equipment must mandatory requires Test report in the name of both Tenderer act as bidder and manufacturer. 1. Test Report of SS Nut and Bolts 2. Test Report of LLDPE Base Caps for Open Gym 3. Test Report of Powder Coating Pipe 4. Test Report of SKF Bearing No. 6007-2Z 5. Test Report of FRP/Plastic (Fiber Pad) 6. Test Report of Welding Pipe (Robotic MIG Welding) 7. Test Report of MEK Solvent 8. Test Report of Neutrul Salt Spray Test 9. Test Report of Breaking Load of Welding Pipe 10. Test Report of GI Pipe 100 mm NB 11. Test Report of GI Pipe 80 mm NB 12. Test Report of GI Pipe 50 mm NB 13. Test Report of GI Pipe 32 mm NB 14. Test Report of GI Pipe 25 mm NB