81558ADDN/ALTN / RENOVATION TO FOUR VERTICALS OF SQN TOILETS ,16 CAOS QTRS IN D3 AREA, QTRS BLOCK NO 18 TO 35, JCOs/ NCOs/ ANNC AND SERVICE OFFICERS MD ACCN IN D1 AREA AT NDA KHADAKWASLA.

Amount

Dismantling floor, hearth or wall tiling including cement mortar rendering , bedding , removing serviceable tiles to store and rubbish off the premises complete all as directed.

M&L for glazed coloured ceramic joint free tiles 350 mm x 250 mm x 7 mm / 450 mm x 350 mm x 7 mm thick on vertical surfaces such as skirting / dado laid over 20 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M&L for coloured non skid ceramic tiles, joint free, coloured tiles 7 mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and as directed

Providing and fixing stainless steel (Grade 304) stair / railing / duct / grating /drain with cover made of channels, plates,angles etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the duct with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the wall and floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as directed.

M&L for 18 to 20 mm thick granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window/door- cills,cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and 20 mm thick screed bed in cement moter (1:6) including taking down any type of stone complete all as specified and as directed.

M&L for granite using 25 mm thick granite for urinal partition/ vertical surfaces etc. in cement morter 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of complete all as directed by Engr-in-charge.

M&L for 20 mm to 25 mm thick unpolished cuduppah stone slab as in below granite stone and vertical support and like including necessary jointing and pointing and making good to disturbed surface complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n exc 15 cm thick (below or above ground level) complete all as directed.

M&L for 75 mm plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in sub base including water proofing compound or simillar work complete all as specified and as directed.

Supply only integral water proofing compound ISI marked complete all as specified and as directed.

M&L for carrying out water proofing treatment to sunken slab, floors and wall of WC, WHB and urinals, as mentioned below :-

Special treatment to toilet floor by demolition of existing treatment of any description and thickness, removal rubbish outside MD land.

Clean the sunken portion of toilet / Bath / WC / Kitchen throughly to remove laitance, dirt, dust, etc.

Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit" Pidicrete URP" or equivalent,)

Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape" and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or equivalent. Nahani traps, etc to be fitted securely and the gaps around it to be grouted in the same manner.

Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Bathseal Plus" or equivalent on all angle fillets by brush and cover it with 100 mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely.

In the remaining area, in dry sustrate condition brush apply first coat of the same coating and further apply second coat when first coat is dry. Extend the coating upto 150 mm above the FFL. Above FFL, another cementitious waterproof coating "Dr Fixit Pidifin 2 K" or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely.

After 2 to 3 days, sunken portion must e overlaid with a 50 mm thick concrete screed M-15 type B0 mixed with intergral WPC (Liquid) laid to be slope 1.60 towards outer face of wall, incl fill up the sunken portion with lean concrete 1:5:10 type E2 etc complete all as per manufactures instruction and direction.

S&F in repairs 40 mm High density Polyethylene pipes (HDPE) of pressure rating 6 Kgf /cm2 fixed complete to wall, ceilings or in floors etc, with all fitting and fixed complete to walls or in sunden floor complete all as specified and as directed.

Demolition of precast concrete block walling and similar items ie. ashlar facing dressed stone work, precast concrete articles etc.,of any discription and in any position, built in cement mortar, including all quoins, arches and pillars etc complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks of PCC (1:3:6) (using 20 mm graded stone aggregate in the proportion as directed) not exc 10cm in width and set and jointed in cement Mortar (1:4) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as directed.

M&L for plastering 15 mm thick in CM 1:6 finising even & smooth without using extra cement on wall complete all as specified and as directed.

M&L for plastering 10 mm thick in CM 1:4 finising even & smooth without using extra cement on ceiling complete all as specified and as directed.

De-watering of water from OH tanks of any size completely cleaning the tanks throughly by using coastic soda / bleaching powder complete all as directed.

M&L for roughing of existing plaster surfaces by dubbing out average 5 mm thick, in CM (1:4) on wall & floor of water tanks complete all as specified and as directed.

M&L for Rendering plaster 15 mm thick on any faces of brick work or concrete surfaces with CM 1:4 including mixing of integral water proofing compound 3 % by weight of cement finished even & smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid seperately.

Preparation of new plastered surfaces and applying 2 coats of polimer modified mortar food grade of make Dr Fixit pidifin 2K / Home shield Latex shiel 2K/ or any approved make on an interval of 6 hrs. Before filling water let it cure for 7 days Rinse twice before finally filling the water complete all as specified and as direcetd.

Taking down wooden chowkats with shutters (w/o taking off shutter from frame) not exc 1.5 Sqm each complete all as direceted.

M&L for Powder coated (minimum thickness of powder coating 50 mm micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing ,including irrecting in concrete surface complete all as specified and as directed.

M&L for Powder coated (minimum thickness of powder coating 50 mm micron) aluminium top /side hung ventilator / window with aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.

Taking down wooden chowkats with shutters (w/o taking off shutter from frame) exc 1.5 Sqm and n. exc 4 Sqm each complete all as directed.

S&F Factory made 100% SOLID WOOD PLASTIC COMPOSITE (WPC) door frame of size 90 mm X 45 mm made from wood plastic composite (single extruded process) material with density 780 kg /cbm .The door frame shall be fixed to the wall using 65/100 mm long M S Screws through the frame by using PVC fasterners . A minimum of 4 nos of screws to be provided for each vertcal member & minimum 2 nos for horizontal member etc complete as per specifications and as directed by Engineer-In-Charge.

S&F Factory 28 mm thick factory made three layer rigid PVC/WPC door shutter made 100% solid PVC flush shutter 28 mm thick , made from co - extruded three layer rigid PVC foam sheet ( single extruded) with density not less than 600 kg /Cbm outer layer 1 mm thick should be of rigid PVC with density of not less than 1400 kg/cbm manufactured by an ISO 9001-2015 certified company, complete as per specifications and as directed by Engineer-In-Charge.

S&F Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-12 - Size of hinges 100 mm complete all as specified and as directed.

S&F Brass barrel tower bolts, with barrel of extruded section- length of bolt -150 mm complete all as specified and as directed.

S&F Rim latch with two levers, of brass body. Polished bright , with brass knob or lever handle and fixed - Size of latch 75 mm complete all as specified and as directed.

S&F brass handles, cast type, polished bright, 125 mm size complete all as specified and as directed.

S&F in repairs CP brass Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and as directed.

S&F in repairs Stainless Steel towel ring complete all as specified and as directed. Make : Metro / Vista Levolor / MAC-DECOR / Sophia.

S&F in repairs double coat hook complete all as specified and as directed. (Make : Jaguar , Cat Part No 1161N or Equivalent in Prayag / ESS ESS / CROWN )

S&F in repairs 1 mm thick, 25 mm dia casted stainless steel rods as in cubical type, curtains rods, hangers,fixed to wall with suitable tees, flange, and socket fixed with screws, btackets or by welding complete all as specified and directed by engineer in charge.

Taking up or down 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 40 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed.

Supply & laying GI tubing of size 15 mm bore 'heavy grade' ISI marked with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /ceiling and including clips, wall hooks etc, complete all as specified and as directed

Supply & laying GI tubing of size 20 mm bore 'heavy grade' ISI marked with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /ceiling and including clips, wall hooks etc, complete all as specified and as directed

Supply & laying GI tubing of size 40 mm bore 'heavy grade' ISI marked with and including all fittings such as bends, socket, tees, elbows, unions, barrel, nipple, plugs, etc laid in floors /ceiling and including clips, wall hooks etc,complete all as specified and as directed

S&F in repairs Bib taps cast copper alloy 15 mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed. (Make: Jaquar Cat Part No DLX-512)

S&F in repairs central hole basin mixer without pop up waste system with 450 mm long braided hoses complete all as specified and as directed. (Make Jaquar Cat Part No 167 KNB)

M&L in repairs for providing two way bib cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15 mm bore of pipe with long shunk and cup complete all as specified and as directed. (Make : Jaquar Cart Part No CAN-FLR -5041 N)

M&L in repairs for shower arm,15 mm bore, 450 mm long with 90 degree bend for rain showers complete all as specified and as directed. (Make:-Jaquar cat No. SHA- 479L450)

M&L in repairs for shower 120 mm dia round shape multi flow with casecade effect (ABS Body Chrome plated with gray Face Plate ) with rubit cleaning function complete all as specified and as directed. (Make:-Jaquar cat No. OHS - 1779)

S&F in repairs hand shower (health faucet) with 8 mm dia, 1 m long flexible tube and wall hook complete all as specified and as directed. (Make : Jaquar Cat No. ALD-CHR 593)

S&F in repairs wall mixture brass CP for mixing hot and cold water with connection to overhead shower with 115 mm long bend pipe and wall flange, screwed down for iron pipe and fixed for 15 mm bore of pipe complete all as specified and as directed. (Make - JAQUAR Cat No FLR- 5273 UPR )

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed 15 mm bore of pipe complete all as specified and as directed.

S&F Ball brass 15 mm Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed. (Minimum weight 15 mm-142 gms) complete all as specified and as directed.

S&F Ball brass 25 mm Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed. (Minimum weight 25 mm-455 gms) complete all as specified and as directed.

S&F in repairs Vitreous china wash down water closet (Pedestal pattern) with P or S trap , white in colour including fixing bolts, connection to drain and to flushing pipe with low level PVC valve less symphonic action type flushing cistern of 10 ltrs capacity white in colour with inlet, ball valve float and PVC flush pipe 32 mm dia with white seat cover, closed pattern with flat bottom and cover and mild steel chromium plated or hinging device complete all as specified and as directed.

M/L in repairs for providing angular stop cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15 mm bore of pipe with long shunk and cup (concealed type) complete all as specified and as directed.

S&F in repairs Jet spray with CP Plate suitable for fixing to EWC along with 1 m long PVC pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash hand basin oval type of size 580 mm x 450 mm white excluding taps waste pipe on granite counter complete all as specified and as directed.

M&L for 32 mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 32 mm-45gms) for WHB complete all as specified and as directed.

M&L for 40 mm waste coupling of PTMT (half or full threaded) (Minimum weight 40mm-60 gms) for Urinal complete all as specified and as directed.

M&L in repairs 32 mm dia of bore bottle trap of PTMT having minimum water seal of 25 mm (Minimum weight 32 mm-260 gms) for WHB complete all as specified and as directed.

M&L in repairs 40 mm dia of bore bottle trap of PTMT having minimum water seal of 25 mm (Minimum weight 40 mm-270 gms) for Urinal complete all as specified and as directed.

S&F in repairs vitreous china urinal,half stall type (back or corner wall type) , white,complete including providing and fixing plugs, bedding urinal against wall in cement mortar in 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing autometic flushing cistern with brackets , flush pipe , grating and union for discharge pipe complete all as specified and as directed.

S&F in repairs CP urinal spreader connected to 15 mm bore dia of pipe, cast copper alloy chromium plated ,fancy type,screwed down high pressure, externally threaded screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs CP urinal connection 15 mm bore complete all as specified and as directed.

S&F concussive push butten taps fancy chromium plated of cast copper alloy screwed for iron pipe 15 mm bore complete all as specified and as directed.

S&F in repairs Grating SS Square fittings made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT (minimum wight 85 gms) as approved by E-in-C.

S&F stainless steel CP toilet paper holder with flap complete all as specified and as directed. (Make : Jaquar Cat No.AHS-CHR-1551)

S&F 15 mm dia CP brass PVC connection 600 mm long including with PTMT nuts both side etc complete all as specified and as directed.

Dismantling of cast iron 100 mm bore pipes jointed in cement motar complete all as directed.

Dismantling of cast iron 75 mm bore pipes jointed in cement motar complete all as directed.

M&L for providing 100 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to walls complete all as specified and as directed.

M&L for providing 75 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, but fixed to walls/ floor complete all as specified and as directed.

S&F 75 mm bore UPVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 100 mm dia Junction Double, equal or unequal, ordinary or inverted with spigot or socket branch or with parallel branch provided with acess door complete all as specified and as directed.

S&F CI 75 mm dia Junction Double, equal or unequal, ordinary or inverted with spigot or socket branch or with parallel branch provided with acess door complete all as specified and as directed.

S&F providing 100 mm dia CI Bends (any radius), diminishing pieces or tapers (larger bore measured)with oval access doors including necessary joints to junctions complete all as specified and as directed.

S&F providing 75 mm dia CI Bends (any radius), diminishing pieces or tapers (larger bore measured)with oval access doors including necessary joints to junctions complete all as specified and as directed.

S&F Stack clamps for 100 mm bore of pipe out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F Stack clamps for 75 mm bore of pipe out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

M&L for Nahani trap 100 mm dia cast iron, with grating including jointing cement concrete type B-1 (1:2:4) all as specified and directed by Engineer-in-Charge

M&L for floor trap 100 mm dia cast iron, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Supply only Cast Iron gully trap with cover grade FG 150, exc 5 kg each complete all as specified and as directed.

Fixing in repairs C I gully trap with cover grade FG 150, exc 5 kg each setting in CM (1:3) and flaunching with cement concrete 1:2:4 rype B1 cast iron manhole cover and frames heavy duty complete all as specified and as directed.

M&L for Slotted AC vent cowl 100 mm dia complete all as specified and as directed.

S&F Unplasticised PVC pipes of pressure rating 10 kgf / cm2 fixed complete to walls, ceilings or in floors etc any type of pipe 50 mm bore of pipes complete all as specified and as directed.

M&L for core cutting of 150 mm dia, n exc 600 mm deptth in stone wall and making good disturbed surfaces and filling the remaining area with cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed.

Dismantling of single layer of manglore / Similar pattern tiles in roofing complete all as directed.

Dismantling of battens of tiles of any size and description spaced exc 15 cm, including tiling fillets complete all as directed.

Dismantling of unframed work timber scantlings 40 sq. cm and over in section, in any position complete all as directed.

Dismentling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed.

Dismantling of wooden boarding of any description fixed in any position with nails complete all as directed.

S&F Galvanised corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with 'L' type or 'J' type of cranked hook in lieu of screws and washers in roofs, walls etc with grade of zinc coating 275 complete all as specified and as directed.

S&F Galvanised plain mild steel sheeting 0.63 mm thick in Ridge, hips, valley gutter, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

S&F wrought 2nd class hard-wood in scantlings in repairs, to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store complete all as specified and as directed.

S&F clean sawn ,2nd class H/W tile battens at 30 cm centres, exe 5 and n.exe 15 sqcm sectional area complete all as specified and as directed.

M&L for preparing tile battens of any size and spacing and treated all over (measured overall on one side only spaces not deducted) with two coats of cresoting oil etc complete all as specified and directed by Engr-in-charge.

M&L for providing roof tiles Manglore pattern interlocking at side joints, laid dry complete all as specified and as directed.

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in CM (1:4) complete all as specified and as directed.

S&F in repairs for 2nd class H/W, 20 to 25 mm thick weather boarding clean sawn, rebated on thick edge to give 20 mm laps and fixed complete all as specified and directed by Engr-in -charge.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs / blankets, any thickness, including cover fillets andincluding re-fixing in position complete all as directed.

S&F anodised aluminium snap grid 605 mm x 605 mm frame work for false ceiling complete all as specified and as directed.

S&F Non asbestos fibre cement building boards 6 mm thick, fixed or laid / inserted to timber / GI / Aluminium frame work grid of size 605 mm x 605 mm with screw as work in ceiling flat or sloping complete all as specified and as directed.

M&L for complete removal of existing treatment on plastered surfaces of walls chalk whitening on wall prepatery to receive distemper and applying two coats of oil bound distemper complete all as specified and as directed.

All as per item No 106 here- in- above but in ceiling complete all as specified and as directed.

M&L for preparing newly plastered wall surface and applying two coats of distemper oil emulsion, white or tinned over a coat of chalk whitening primer, complete all as specified and directed by Engineer-in-Charge

All as per item No 108 here- in- above but in ceiling complete all as specified and directed by Engineer-in-Charge

M&L for preparation new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of one coat of pink primer complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including welding angles, as necessary,bending and gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed.

S&F Mild steel 1.25 mm thick, plain, black sheet in water tanks , water trough , ducts , covers and similar work, cut to size, holes punched; including round headed screws,clout nails or rivet sand fixed to wood orsteel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Demolition of cement concrete (reinforced) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

M&L 1:2:4 type B1 using (20 mm graded stone aggregate) site mix as in RCC slab supported on walls , beams and columns in floors roofs landing balconies , canopies , deck slabs and in shelves and the like complete all as specified and as directed.

Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200 mm thick, complete all as specified and as directed.

S&F TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips. complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as directed.

M&L for point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unsheathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box with cover plate including frame suitable for modular type switches, sockets, fan regulator etc for following complete all as specified and as directed.

One light / Fan point controlled by one way switch 6 Amps 240 volts.

One 3 pin modular socket outlet point, 5/6 Amps, on independent board.

One 3 pin socket outlet, 5/6 Amps on the same board with other switches.

One 3 pin socket outlet , 15/16 amps on independent board with cable 4 Sqmm and 4 sqmm as earth wire.

S&F modular switch piano type 6 amps one way one module.

S&F modular Socket, 6A - 2/3 pin combined 2 module.

S&F Modular switch piano type 1 way 16A, 1 module.

S&F Modular socket 6A/16A - 2/3 pin combined 2 module.

S&F ceiling rose surface shall comply with IS :371-1979 Bakelite 60x 25 mm two to three terminals plates and of outside diameter not less than 63.5 mm complete all as specified and as directed.

S&F LED tube 1200 mm in lenth along with CRCA LED baten complete LED light fitting fixture of 20W including LED tube and batten, LED tube fitting consist of Polycarbonate housing with extruded aluminium heatsink for mounting LED chip, LED tube system wattage consist of 20 W, 140V-260V AC, system Lumen Output min 2000 lumen in 20W with 5700-6500 K CCT with pf > 0.95 CRI > = 80 and with < = 10% THD with min 2.5 KV surge protection in built .LED batten consist of powder coated CRCA box type batten with decorative end caps should be supplied for installing above LED tubes complete all as specified and as directed.

S&F exhaust fan of sweep 225 /230 mm,single phase 240V of not less than 3 star BEE star rating , louvers and making hole by core cutting as per the required size of the exhuast fan and making good the disturbed surfaces and fixing to the wall with proper fasetner arrangements and all accessories complete all as specified and as directed.

S&F MCB DB 08 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits as reqd at site complete all as specified and as directed.

S&F MCB SP 6 to 32 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and as directed.

S&F MCB SPN 40 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and as directed.

S&F MCB DB 04 way SPN double door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits as reqd at site complete all as specified and as directed.

Taking down the Geyser carefully after disconnecting and making good the disturbed surface and submitting the geyser to MES Store.

Horizon Construction