Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹15.1 LAccepted-AOC NAMBLABAL PAMPORE DISTRICT PULWAMA JAMMU KASHMIR 192121 | PAMPORE | PULWAMA | JAMMU KASHMIR | 192121 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹15.5 L+₹5,462.60 (0.35%)Rejected-Finance SANAT NAGAR SRINAGAR PIN 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | L-2 | Rejected-Finance Being not L-1. | |
| 3 | L-3₹17.9 L+₹2.5 L (16.2%)Rejected-Finance 01 NEW MATTAN ADDA ANANTNAG ANANTHNAG JAMMU KASHMIR 192101 | ANANTNAG | JAMMU AND KASHMIR | 192101 | L-3 | Rejected-Finance Being not L-1. |
| Sl No | Description | Qty | Unit | M/S BHAT ENGINEERING WORKS L2 | ms new dar water star L1 | Asian Marketing Co L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in Hard/Dence/ loose/soft soil complete all as specified and directed by Engineer-in-Charge. | 230 | Cum | 271 ₹62,330 | 150 ₹34,500 Lowest | 200 ₹46,000 |
| 2.00 | Description all as per item No.1 above but depth exc 1.50m and n.exc 3mtr in depth complete all as specified and directed by Engineer-in-Charge. | 0.54 | Cum | 390 ₹210.6 | 150 ₹81 Lowest | 9,000 ₹4,860 |
| 3.00 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed by Engineer-in-Charge. | 125 | Cum | 210 ₹26,250 | 150 ₹18,750 | 120 ₹15,000 Lowest |
| 4.00 | Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge. | 105 | Cum | 190 ₹19,950 | 100 ₹10,500 Lowest | 410 ₹43,050 |
| 5.00 | Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed by Engineer-in-Charge.
Note : Punned thickness 18 cm will be measured. | 70 | Cum | 900 ₹63,000 | 800 ₹56,000 | 730 ₹51,100 Lowest |
| 6.00 | Supply and laying Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified directed by Engr-in-charge. | 7 | Per 1000 No | 4,500 ₹31,500 Lowest | 6,000 ₹42,000 | 4,500 ₹31,500 Lowest |
| 7.00 | M&L for Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified. | 1 | Cum | 5,000 ₹5,000 | 6,500 ₹6,500 | 4,100 ₹4,100 Lowest |
| 8.00 | M&L for Plain cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in copings and the like, rounded and chamfered on edges complete all as specified and directed by Engineer-in-Charge. | 2 | Cum | 6,500 ₹13,000 | 6,500 ₹13,000 | 5,000 ₹10,000 Lowest |
| 9.00 | Supply and fixing in replacement steel tubular swaged pole with cast iron base plate finial tapper plug, bolts nuts and screws and specified type 410-SP-31(9 mtr long) in truly vertical position 1.5 m length of pole above ground level shall be painted with two coats of synthetic enamel paint in strips of 30 cm width, black and yellow alternatively and painting with two coats of aluminium paint over a coat of red oxide primer on rest part of pole and its connected parts complete all as specified and directed by Engineer-in-Charge. | 2 | Each | 18,200 ₹36,400 | 12,000 ₹24,000 Lowest | 15,000 ₹30,000 |
| 10.00 | M&L in replacement Pin type insulator porcelain, vitreous, white/ brown or green insulators including one galvanised MS spindle, two galvanized iron washer, GI nut of size 100 mm height and 65mm dia 1100 volts grade complete all as specified and directed by Engineer-in-Charge. | 5 | Each | 210 ₹1,050 | 200 ₹1,000 Lowest | 200 ₹1,000 Lowest |
Tender Value
₹19 L
EMD Value
₹38,000
Closing Date
25 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 861 EWS
GE 861 EWS c/o 56 APO
REPAIR AND MAINT OF EXTERNAL ELECTRIC LOW TENSION DISTRIBUTION SYSTEM AT KHANABAL UNDER GE 861 EWS
2025_MES_716587_1
GE 861 EWS-30 (T)/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE 861 EWS
As per Tender Documents
7 documents required · 7 mandatory
₹500
Yes
GE 861 EWS
₹38,000
Yes
11 Oct 2025
24 Jun 2025
1 Aug 2025
24 Jun 2025
25 Jul 2025
8 Jul 2025
Amount
Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in Hard/Dence/ loose/soft soil complete all as specified and directed by Engineer-in-Charge.
Description all as per item No.1 above but depth exc 1.50m and n.exc 3mtr in depth complete all as specified and directed by Engineer-in-Charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed by Engineer-in-Charge.
Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.
Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified and directed by Engineer-in-Charge. Note : Punned thickness 18 cm will be measured.
Supply and laying Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all as specified directed by Engr-in-charge.
M&L for Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified.
M&L for Plain cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in copings and the like, rounded and chamfered on edges complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement steel tubular swaged pole with cast iron base plate finial tapper plug, bolts nuts and screws and specified type 410-SP-31(9 mtr long) in truly vertical position 1.5 m length of pole above ground level shall be painted with two coats of synthetic enamel paint in strips of 30 cm width, black and yellow alternatively and painting with two coats of aluminium paint over a coat of red oxide primer on rest part of pole and its connected parts complete all as specified and directed by Engineer-in-Charge.
M&L in replacement Pin type insulator porcelain, vitreous, white/ brown or green insulators including one galvanised MS spindle, two galvanized iron washer, GI nut of size 100 mm height and 65mm dia 1100 volts grade complete all as specified and directed by Engineer-in-Charge.
M&L for mild steel work in Cross arms, bracings, supports, clamps and back plate fabricated from structural steel section including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shapes size as indicated or directed and inclusive of one primer coat, and one under coat and one finished coat of aluminium paint complete all as specified and directed by Engineer-in-Charge.
S&F in repair MCCB 63 Amp 4 pole rupturing capacity16 kA 4 pole 415 volts fixed type complete all as specified and directed by Engineer-in-Charge.
S&F in repair MCCB 100 Amp 4 pole rupturing capacity 16 kA 4 pole 415 volts fixed type complete all as specified and directed by Engineer-in-Charge.
S&F in repair MCCB 160 Amp 4 pole rupturing capacity 36 kA 4 pole 415 volts fixed type complete all as specified and directed by Engineer-in-Charge.
S&F in repair MCCB 200 Amp 4 pole rupturing capacity 36 kA 4 pole 415 volts fixed type complete all as specified and directed by Engineer-in-Charge.
S&F in repair MCCB 250 Amp 4 pole rupturing capacity 36 kA 4 pole 415 volts fixed type complete all as specified and directed by Engineer-in-Charge.
S&F in repair MCCB 360 Amp 4 pole rupturing capacity 36 kA 4 pole 415 volts fixed type complete all as specified and directed by Engineer-in-Charge.
S&F in repair MCCB 400 Amp 4 pole rupturing capacity 36 kA 4 pole 415 volts fixed type complete all as specified and directed by Engineer-in-Charge.
S&F in repair MCCB 1000 Amp 4 pole rupturing capacity 36 kA 4 pole 415 volts fixed type complete all as specified and directed by Engineer-in-Charge.
S&F in repair connecting and testing change over switch 4 pole 415 volts on load of rating 63 Amp and including sheet enclosures complete including taking out to old u/s switch complete all as specified and directed by Engineer-in-Charge.
S&F in repair connecting and testing change over switch 4 pole 415 volts on load of rating 100 Amp and including sheet enclosures complete including taking out to old u/s switch complete all as specified.
S&F in repair connecting and testing change over switch 4 pole 415 volts on load of rating 200 Amp and including sheet enclosures complete including taking out to old u/s switch complete all as specified and directed by Engineer-in-Charge.
S&F in repair including taking down 1100 volts grade service cable with PVC insulated aluminium conductor 6 Sq mm nominal cross section 2 core complete all as specified and directed by Engineer-in-Charge.
Description all as per item No 23 above but size 10 Sqmm 2 core complete all as specified and directed by Engineer-in-Charge.
Description all as per item No 23 above but size 16 Sqmm 2 core complete all as specified and directed by Engineer-in-Charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core, laid in trench/ duct / along pole/wall etc including making connection complete all as specified and directed by Engineer-in-Charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core, laid in trench/ duct / along pole/wall etc including making connection complete all as specified and directed by Engineer-in-Charge.
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95sq mm 3.5 core, laid in trench/ duct / along pole/wall etc including making connection complete all as specified and directed by Engineer-in-Charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 sq mm 3.5 core, laid in trench/ duct / along pole/wall etc including making connection complete all as specified and directed by Engineer-in-Charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sq mm 3.5 core, laid in trench/ duct / along pole/wall etc. including making connection complete all as specified and directed by Engineer-in-Charge.
M&L for cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 70 Sqmm to 95 Sqmm 3.5 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by Engineer-in-Charge.
M&L for cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 120 Sqmm to 185 Sqmm 3.5 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by Engineer-in-Charge.
M&L for cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 240 Sqmm to 300 Sqmm 3.5 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by Engineer-in-Charge.
M&L for painting of LT Steel tubular Elect pole with cross arm angle etc with two coat silver colour waterproof enamel paint including scrapping the old surface with emery paper to remove old paint and applying one cot of primer complete all as specified and directed by Engineer-in-Charge.
Supply, laying in trenches, galvanized iron pipe light grade (ISI marked) 80 mm dia for crossing of road and passing of UG cable complete all as specified and directed by Engineer-in-Charge. Note : Making good of existing surface/ road crossing etc will be done by the contractor without any extra cost. coated rate shall be included.
Supply, laying in trenches, galvanized iron pipe light grade (ISI marked) 40 mm dia for crossing of road and passing of UG cable complete all as specified and directed by Engineer-in-Charge. Note : making good of existing surface/ road crossing etc will be done by the contractor without any extra cost. coated rate shall be included.
S&F in repair including taking down old unserviceable 1100 volt grade copper conductor cable single core 2.5 sq mm complete all as specified and directed by Engineer-in-Charge.
S&F in repair PVC conduit pipe 25 mm complete all as specified and directed by Engineer-in-Charge.
S&F in repair street light junction / pole box of size 250x200x150 mm made of MS sheet 1.6 mm thick front openable with fixing screw painted with two coat of synthetic enamelled paint over a coat of steel primer with and including two nos aluminium bus bar 20x 3 mm mounted on epoxy based post insulator and drilled holes for cable connection including one nos MCB SP 6 Amp fixing on steel tubular pole with MS strip of size 20x3 mm with suitable size nuts, bolts and washers complete all as specified and directed by Engineer-in-Charge.
S&F security light brackets of GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including arrangement of fixing at pole/wall/angle with the help of flat iron clamps and suitable nuts and bolts including all material required for fitting, including matching the surface with existing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement of galvanised strip 32x6mm with fixing arrangement etc complete all as specified and directed by Engineer-in-Charge.
Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete with including suitable wire 2.5 sqmm copper conductor from junction box to light fitting in non metallic PVC conduit complete all as specified and directed by Engineer-in-Charge.
Supply and fixing LED street light fitting 36 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer-in-Charge.
M&L for Earthing complete with GI steel earth plate electrode 600x600x6mm burried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of earth plate not less than 1.5mtr below normal ground level connected to the Galvanised iron wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised steel all as shown on electrical plate No 3 of MES Sch 2009 Part-I connected to earthing test point and testing on completion with and including necessary excavation and earthwork, earth electrode, earthing lead from electrode to eqpt/sub station, adequated quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 using 20mm graded black trap/granite/basalt stone aggregate, 40mm thick cover reinforced with 8mm dia bar 4 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20mm bore with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe up to equipment max length 7.5 mtr complete all as specified and directed by Engineer-in-Charge. Note:- (i) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department .
M&L and tools as required for repair of broken out old LT panels steel doors by cutting of dammaged / misaligned old hinges and welding of new suitable size hinges as required, and repair /replacement of door holding cleats as required to re-fixing door, proper alignment for smooth working i.e. opening and closing complete all as specified and directed by Engineer-in-Charge.
M/S BHAT ENGINEERING WORKS (BID ID -3359242)
Asian Marketing Co (BID ID -3359743)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .