Constt. of new building 02 ACR of size 20x18 with 7 feet wide verandha, Kitchen shed and Toilet at GPS Pathiara

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, A.K.O.S

E/work in excavation in foundation trenches (Not exceeding 1.5 m in width as well as 10 sqm on plain) including dressing of sides & ramming of bottoms, lift up to 1.5m, including getting out the excavated soil. In all kinds of soil.

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:5:10(1 cement:5 coarse sand:10 garded stone 40 mm nominal size)

Providing and laying in position cement concrete of specified grade inculding curing but excluding the cost of centring and shuttering- All work upto plinth level in 1:3:6(1 cement:3 coarse sand:6 garded stone 20 mm nominal size ]

Centring and shuttermg including strutting, propping etc. and removal of formwork for·

Foundations, footings, bases of columns etc. for mass concrete.

Suspended floors, roofs , landing , balconies and access platfarm

columns, pillars, ,piers, abutments, posts and struts

Edges of slab below 20 mm size

Reinforced cement concrete work in beams, suspended floors , roofs havingslpoes up tp 15degree landing balconies shelves, chajjas ,lintels,bands,plain window sills , stair cases and spiral stair cases up to five level including curing but excluding the cost of centring, shuttering , finishing and reinforcement with 1:1.5:3(1 cement:1.5 coarse sand:3garded stone 20 mm nominal size)

Steel reinforcement for RCC work including starighting, cutting, bending , placing in position and binding all complete (including carriage of material)

Brick work witk common burnt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth inclluding curing in cement mortar 1:6(1 cement: 6 coarse sand) .

12 mm cement plaster of mix1:6(1 cement :6 coarse sand)

15 mm cement plaster of mix1:6(1 cement :6 coarse sand)

6 mm cement plaster of mix1:3(1 cement :3 coarse sand)

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand: 6 graded stone agg.) 20 mm nominal size over 75 mm bed of dry brick blast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth

Cement concrete flooring 1:2:4 ( 1 cement:2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including slurry and curing complete but excluding the cost of nosing of steps etc completye 50 mm thick with 20 mm nomianl size stone aggregate (including carriage of material)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 30mm. Second class deodar wood

Providing and fixing panelled &glazed shutters for doors, windows and clerestory windows hinges bright finished of required size with necessary screws.excluding panelling Second class deodar wood 30mm

Ply wood 5 ply, 9 mm thick Plain partical board flat pressed ,3 layer or graded wood partical board medium density grade I , IS :3087 marked ( Door Pannel )

Providing and fixing fly proof wire gauge to windows and clerestory windows & door with MS flat 15x3 mm and nuts and bolts complete

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats.

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm necessary fittings complete, including applying a priming coat of approved Using flats 30x6mm for diagonal braces and central cross piece

P/F white vitreous china pedestal type water closet (indian type W.C. pan ) with ceat and lid, 10 ltr.low level white P.V.C. flushing cistern including flush pipe with manually controlled device ( handle lever ) conforming to IS: 7231, with all fitting and fixture, complete including cutting and making good the walls and floors wherever reduired: W.C. pan with ISI marked white solid plastic seat and lid

P/F C.P. brass angle valve for basin mixer and gyser point of approved make conforming to IS : 8931 15mm nominal bore

P/F ball valve ( brass ) of approved quality complete. High or Low pressure with plastic floats 15 mm nominal bore

P/F G.I. union in G.I. pipe including cutting and threading the pipe and make long screws etc. complete ( new work ) 15mm nominal bore.

P/F brass bib cock of approved quality 15mm nominal bore

Short Nose

Long Nose

white vitreous china wash basin size 660 x 460 mm with single 15mm C.P. brass pillar taps with elbow operated levers ISI marked

P/F G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the wall etc. 15 mm nominal bore ( internal work ).

P/F G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the wall etc. 20 mm nominal bore ( external work ).

P/F G.I. pipes complete with G.I. fitting and clamps, including cutting and making good the wall etc. 25 mm nominal bore ( external work ).

Making connection og G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including , cutting and threading the pipe etc. complete 25 to 40 mm nominal bore.

P/F wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good the wall wherever required white vitreous china wash basin size 660 x 460 mm with single 15mm C.P. brass pillar taps with elbow operated levers ISI marked

Providing and fixing white vitreous china pedestal type water closet (indian type) with seat and lid, 10 litre low level flushing cistern with fittings & C.I./M.S.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C.pan of Hind ware / Cera make with ISI marked white solid plastic seat and lid with white vitreous china flushing cistern & C.P. flush bend.

P/F PVC waste pipe for wash basin including PVC waste fitting complete 32mm dia

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing

P/F white vitreous china flat back or wall corner type lipped front urinal basin of 430X260X350 mm .

Providing and laying PVC soil easte pipe including bed concrete and all iround PVC pipe as per standard design 150mm dia (Prince, finolex, superme make of 4 kg / cm² pressure.

(i) 75mm dia

100mm dia

150 mm dia

Providing and fixing PVC loose collar (surpreme / prince make).

(i) 75mm dia

100mm dia

150mm dia

Providing and fixing PVC plain bend (surpreme / prince make).

(i) 75mm dia

100mm dia

150mm dia

Providing and fixing PVC door bend (surpreme / prince make).

75 mm dia

100 mm dia

150 mm dia

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without bent arm complete, including cost of cutting and making good the walls and floors.

(i) 100mm x 75mm

(ii) 100mm x 100mm

Cutting of holes in brick masonry / RCC slab / floor for passing pipes.

a) Brick Masonry 300mm x 300mm

Constructing bricks masonry manhole in cement mortar 1:4 mix RCC tob slab with 1: 2 : 4 : mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) in side plastering 12mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design inside 90 x 80 cm and 45cm deep including CI cover with frames (light duty) 455 x 610mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg with FPS bricks with class designation 75 and with (a) crushed stone aggregate.

Providing and placing on terrace (at all floors levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License nos.with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank (Sintex, Electroplast, Star, Lotus, or equivalent having valid ISI license).

Providing and fixing PTMT extension nipple for water tank pipe, fitting of approved quality, colour and make (Prayag or equivalent). (i) 32mm nominal bore

Providing and fixing white vitreous China pedestal for wash basin complete recessed at the back for the reception of pipes and fittings.

.Providing and fixing G.I. inlet connection for flush pipe connecting with W.C.pan.

Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved make confirming to IS : 8931 (Jaguar make Code No.051).

Providing and fixing PTMT shelf 440mm long 124mm width and 36mm height of approved quality & colour weighing not less than 300 grams.

Rain water pipe 110mm dia.

Providing and fixing of 1 Horse Power Motor.

Providing and fixing 32mm Ø PVC waste pipe for sink or wash basin including PVC waste fitting complete.

Providing & fixing in position M.S. grills of required pattern in frames of windows etc with flats, sq. or round bars etc incl priming coat all complete. Fixed to openings / wooded frames with rawl plugs, screws etc.

Making soak pit 2.5m diameter 3.0 M deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75mm and S.W. drain pipe 100mm diameter 1.8 m long complete as per standard design with FPS bricks.

Kitchen sink without drain board 610 x 460mm bowl depth 200mm (Pantry).

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Refer CPWD DSR E&M 2018 Item No. 1.10.1).

Group B

Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

S/F modular boxes, base and cover plate :- Supplying and fixing following size/modules , GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 module ( 75mm x 75mm)

S/F power plug point modular type accessories:- Supplying and fixing on exisitng GI Box modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc as required.

S/F Modular type switch/socket : Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6Amp Switch

S/F modular type electronic fan regulator: Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

S/F 'C' series , SP MCB:- Supplying and fixing 5 amps to 32 amps rating, 240 Volts, 'C" series, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

cement from an av lead of 2km by M.T &50 mtr by head load

Sand from an av lead of M.T= 60KM & 50m by A.T

Bagri from an av lead of M.T = 60 KM & 50m by A.T

Brick from an av lead ofM.T= 88km & 50m by A.T

M/S KAMLA DEVI GOVT CONTRACTOR

Mansotra

GHULAM NAVI

Romesh Chander

Anju Devi

Darshan Kumar