Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹59.1 L
EMD Value
₹1.2 L
Closing Date
8 Dec 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
BUILDING
14 conditions · 2 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Non submission of the documents shall lead to summarily rejection of the offer.
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfillment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
Defination of Similar Work :- Any Civil Construction or repair work.
14 conditions · 2 needing a document upload
The local content requirement for this work isminimum 50% for Make in India compliance. If the tenderer doesnot submit the required local content percentage in the proposalsubmitted, the proposal will be summarily rejected. The tendererhas to enter the local content percentage as required, under Sr.No. 2 of Commercial-Compliance with their offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Indian Railways Standard General Conditions of Contract, April 2022 (IRGCC, April 2022) with correction slips issued up to date of inviting tender will be applicable for this tender.
If the bidder submits Bid Security in form of Bank Guarantee,"The Original Bank Guarantee should be delivered in personReceive and Dispatch Section of this office (i.e. DRM office,Engineering Branch, West Central Railway, Jabalpur) beforeclosing date for submission of bids (i.e. excluding the last date ofsubmission of bids)."
Maintenance Period will be 06 month or one monsoon whichever is later from the date of actual completion of work
Jabalpur- Modernization of S&T Infrastructure through construction of new Room & Repair of Existing Store for signalling at Jabalpur. [ Part of work :- Modernization of S & T Infrastructure through construction of new signal store at Damoh & New Rooms and Repair of Existing store at JBP and KTE.]
DRMW-JBP-228-2026~WCR
DRMW-JBP-228-2026
Open
Works - General
6 Months
Jabalpur, Madhya Pradesh
₹0
₹1.2 L
13 Nov 2026
13 Nov 2026
24 Nov 2026
80 items across 1 schedule · ₹66,33,518.05 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 210 | 205.45 | 43,144.5 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 165 | 253.95 | 41,901.75 |
| 3 | All kinds of soil | cum | 80 | 104.5 | 8,360 |
| 4 | Chlorpyriphos emulsifiable concentrate of 20% | Litre | 135 | 200.9 | 27,121.5 |
| 5 | With Chlorpyriphos E.C. 20% with 1% concentration | Sqm | 240 | 256.15 | 61,476 |
| 6 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 65 | 7,365.15 | 4,78,734.75 |
| 7 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 50 | 8,364.2 | 4,18,210 |
| 8 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 12 | 10,185.05 | 1,22,220.6 |
| 9 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 100 | 307.95 | 30,795 |
| 10 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 140 | 608.35 | 85,169 |
| 11 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 130 | 804.25 | 1,04,552.5 |
| 12 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 13 | 814.95 | 10,594.35 |
| 13 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | cum | .5 | 9,673.5 | 4,836.75 |
| 14 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 6250 | 89.65 | 5,60,312.5 |
| 15 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 1200 | 89.65 | 1,07,580 |
| 16 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 10 | 6,882 | 68,820 |
| 17 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 65 | 8,414.65 | 5,46,952.25 |
| 18 | Area of slab over 0.50 sqm | Sqm | 1 | 4,425.35 | 4,425.35 |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 30 | 1,063.45 | 31,903.5 |
| 20 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 15 | 2,818.5 | 42,277.5 |
| 21 | Kiln seasoned selected class of sheesham wood | Sqm | 12 | 3,626.55 | 43,518.6 |
| 22 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | Each | 12 | 109.6 | 1,315.2 |
| 23 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | Each | 6 | 856.3 | 5,137.8 |
| 24 | 250x16 mm | Each | 20 | 234.9 | 4,698 |
| 25 | 100 mm | Each | 20 | 53.25 | 1,065 |
| 26 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in- Charge. | Metre | 10 | 408.25 | 4,082.5 |
| 27 | 30 mm thick plain PVC door shutters | Sqm | 4 | 2,455.1 | 9,820.4 |
| 28 | Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 +/- 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm). | Sqm | 16 | 9,642.6 | 1,54,281.6 |
| 29 | Using flats 30x6mm for diagonal braces and central cross piece | Sqm | 8 | 4,615.15 | 36,921.2 |
| 30 | 80x0.90 mm M.S. laths with 0.90 mm thick top cover | Sqm | 30 | 2,718.9 | 81,567 |
| 31 | Providing and fixing ball bearing for rolling shutters. | Each | 8 | 424.2 | 3,393.6 |
| 32 | Hot finished welded type tubes | Kg | 5000 | 154.9 | 7,74,500 |
| 33 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 2000 | 142.3 | 2,84,600 |
| 34 | Dark shade pigment using ordinary cement | Sqm | 25 | 983.95 | 24,598.75 |
| 35 | 25 mm thick | Sqm | 360 | 1,706.6 | 6,14,376 |
| 36 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 15 | 935.6 | 14,034 |
| 37 | Size of Tile 600x600 mm | Sqm | 100 | 1,416.65 | 1,41,665 |
| 38 | 110 mm diameter | Metre | 72 | 319.75 | 23,022 |
| 39 | 110 mm bend | Each | 24 | 132 | 3,168 |
| 40 | 110 mm | Each | 36 | 309.5 | 11,142 |
| 41 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 280 | 671.55 | 1,88,034 |
| 42 | Ridges plain (500 - 600mm) | Metre | 30 | 450.6 | 13,518 |
| 43 | Gutter (600 mm over all girth) | Metre | 55 | 1,110.6 | 61,083 |
| 44 | 1:4 (1 cement: 4 fine sand) | Sqm | 610 | 339.7 | 2,07,217 |
| 45 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 610 | 214.3 | 1,30,723 |
| 46 | Two or more coats on new work | Sqm | 400 | 131.45 | 52,580 |
| 47 | Two coats | Sqm | 610 | 116.05 | 70,790.5 |
| 48 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 5 | 2,007.1 | 10,035.5 |
| 49 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 5 | 2,928.1 | 14,640.5 |
| 50 | In cement mortar | cum | 25 | 1,698.45 | 42,461.25 |
| 51 | Of area 3 sq. metres and below | Each | 36 | 302.7 | 10,897.2 |
| 52 | For thickness of tiles 10 mm to 25 mm | Sqm | 50 | 60.5 | 3,025 |
| 53 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 200 | 219.35 | 43,870 |
| 54 | Moorum | cum | 150 | 888.3 | 1,33,245 |
| 55 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 100 | 951 | 95,100 |
| 56 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer- in-charge). | cum | 1 | 8,613.55 | 8,613.55 |
| 57 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 2 | 5,781.35 | 11,562.7 |
| 58 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 2 | 5,540.55 | 11,081.1 |
| 59 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap | Each | 4 | 1,679.6 | 6,718.4 |
| 60 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. | Each | 4 | 1,500.05 | 6,000.2 |
| 61 | 32 mm dia | Each | 4 | 104.35 | 417.4 |
| 62 | 25 mm nominal dia Pipes | Metre | 24 | 408.55 | 9,805.2 |
| 63 | 32 mm nominal dia Pipes | Metre | 24 | 500.95 | 12,022.8 |
| 64 | 40 mm nominal dia Pipes | Metre | 60 | 674.35 | 40,461 |
| 65 | 20 mm nominal dia Pipes | Metre | 10 | 513.75 | 5,137.5 |
| 66 | 25 mm nominal dia Pipes | Metre | 12 | 626.05 | 7,512.6 |
| 67 | 25 mm dia nominal bore | Metre | 30 | 491.2 | 14,736 |
| 68 | 40 mm dia nominal bore | Metre | 30 | 558.35 | 16,750.5 |
| 69 | 40 mm nominal bore | Each | 2 | 707.3 | 1,414.6 |
| 70 | 25 mm nominal bore | Each | 2 | 399.15 | 798.3 |
| 71 | 15 mm nominal bore | Each | 10 | 85.2 | 852 |
| 72 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 1000 | 9.7 | 9,700 |
| 73 | 15 mm nominal bore | Each | 10 | 434.2 | 4,342 |
| 74 | 15mm nominal bore | Each | 16 | 500.35 | 8,005.6 |
| 75 | 150 mm dia. R.C.C. pipe | Metre | 20 | 493.1 | 9,862 |
| 76 | 300 mm dia. R.C.C. pipe | Metre | 20 | 902.05 | 18,041 |
| 77 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 20 | 433.95 | 8,679 |
| 78 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 20 | 531.8 | 10,636 |
| 79 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 4 | 1,019.8 | 4,079.2 |
| 80 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.For the purpose of measurement the entire treated surface will be measured. | Sqm | 500 | 585.55 | 2,92,775 |
| Schedule total | ₹66,33,518.05 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
IRGCCApril2022correctionslipupto12.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
SpecialconditionsConstructionofnewroomforsignalling.pdf
ATTACHMENT
letterforcredit.pdf
ATTACHMENT
PreferencetoMakeinIndialetterdated20.08.2024_compressed.pdf
ATTACHMENT
Listofapprovedbrand.pdf
ATTACHMENT
RlyBdsletterdated03.6.24JPO-CableCut.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .