ADDN ALTN AND SPECIAL REPAIR TO OR MD ACCN BLDG No DS 6 1 TO 6 8 OF ABC LINES AND PROVISION OF TOILET BLOCK WITH CONNECTED ITEMS AT BLDG NO P 64 QTR ROOM OF NO 1 TRG BN AT AOC CENTRE UNDER GE SOUTH SECUNDERABAD

Amount

Surface excavation not exceeding 30cm deep and awering 15cm dep and getting out in soft/loose soil complete all as specified and as directed

Excavation in trenches not exceeding 1.5M and not exceeding 1.5mtrs in depth for foundation, laying / repairing of LT cable / GI pipe. etc and getting out in Hard/Dense soil complete all as specified and as directed

Returning filling in incuding spreading levelling and well ramming complete all as specified and as directed

Removing excavated materials in exc 50 Mtrs an deposited where at a level n. exc 50 mtr where directed n exc 1.50m above the starting point complete all as specified and as directed

Sand filling under floor including watering and consolidation complete all as specified and as directed.

Hard core of gauge not exceeding 63mm of broken bricks, deposited, spread and levelled in layer n.exc 15cm thick, watered and well rammed to a true surface all specified complete all as specified and as directed

M&L PCC 1:4:8 Type D2 using 40mm graded aggregates as in foundations, filling and mass concrete complete all as specified and as directed

M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in cills, lintels, hold fast, bands, coping steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm ht kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating complete all as specified and as directed

M & L for PCC 1:3;6, type C1 (using 20 mm graded stone aggregate) as in bed blocks for hold fasts etc including necessary form work complete all as specified and as directed

Supply only intigral water proofing compound complete all as specified and as directed

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radins built in cement mortar 1:6 complete all as specified and as directed

M&L FLYASH BRICKS straight or curved on plan exceeding 6mm mean radius built in Cm 1:6 complete all as specified and directed.

M & L brick work with FLYASH BRICKS straight or curved on plane to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed

M&L form work to sides of concrete in foundation, footing of column complete all as specified and directed

M&L form work to soffits of suspended slab such as roof slab, floor slab, floor etc. n. exc 200mm thick rough fineshed surface of concrete slab complete all as specified and as directed

M&L form work to chulla hoods, chajjas and similar item of rough finished surface of concrete incl edgs complete all as specified and as directed

M&L Formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed

M&L form work to sides of column. complete all as specified and directed complete all as specified and as directed

M & L plain fillets square, rectangular in section sawn secured with nails or brads 2nd class soft wood sectional area n.xc 13 sq cm each complete all as specified and as directed

M & L second class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed

S & F, 35mm thick, 2nd class hardwood factory made partly panelled and partly glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 complete all as specified and as directed.

S&F 35mm 2nd class hard wood plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial plywood or 12mm thick veneered particle board with commercial veneering on both faces, size of rail and tile as per IS 1003 (Part-I0 Kiln seasoned and chemically pressure treated complete all as specified.

S & F 25mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and as directed

Taking down frames (including grills/wire mesh) with shutters n.exc 1.50 Sqm each (without taking off shutters from the frame) complete all as specified and as directed

Taking down frames (including grills/wire mesh) with shutters n.exc 1.50 Sqm but n.exc 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed

S&F solid PVC door frame size 50*47 mm made out of 5mm thick palin colour PVC sheet with MS square tube suppling and fixing in opening as complete all as specified and as directed

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded oplain colour PVC 'C' channel having a PVC sheet strip of 20mm thick width stuck inside with solvent cement for style and palin colour PVC sheets for tops rail, lock rail and bottom rail,Panelling of plain color PVC sheets to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with the solvent cement, suppling and fixing in the frame at site as per specifications and drawing complete all as specified and as directed

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed

S & F 300mm long aluminium anodised sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed.

S & F in 300mm size aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of seat cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed

S&F 150mm long extruded alumunium alloy handies fabricated type anodised complete all as specified and as directed

S & F 100mm aluminium hasp and staple all as specified and as directed.

S & F fancty type power coated 20mm dia curtain rod with fancy type bracket fixed on wall all as specified and as directed.

S&F tublar towel rail chromium plated, 20mm dia, D type 60cm,between the flangers all as specified and directed. .

S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed

S&F in repairs galvanised stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed

M & L for framed work such as grills, gratings etc with ends of bars, framed guard bars, ladders etc and similar works conforming to Fe-290 Gde E-165 complete all as specified and as directed

S & F MS hold fasts (FI 25X3, 250mm long) conforming to Fe-290, Gde E-165, complete all as specified and as directed

S & F MS TMT steel bars 10mm dia and over cut to length bent to shape reqd incl cranking, bending and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

S & F MS TMT steel bars 6mm - 8mm dia and over cut to length bent to shape reqd incl cranking, bending and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

S & F MS TMT steel bars 5mm dia and over up to and including 10mm dia as in stirrups, spacers cut to length bent shape reqd incl cranking, bending and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified

S&F steel windows or ventilators, fixed type, with glazing bars all as specified and directed

S&F steel window with side hung shutters incl projecting type hingers with steel handles and peg stays with glazing bars, devotailed or welded completed all as specified and directed.

S & F steel window with side hung shutters incluidng projecting type hinges with steel handle and peg stays without glazing bars, devotailed or welded complete all as specified and as directed.

S & F steel ventilator with top hung shutter including hinges, steel peg stay complete complete all as specified and as directed

S & F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete with profile size 105 x 60mm, and made of 1.25m thick, mild steel sheet complete all as specified and as directed by Engr-in-Charge

S & F 18/19mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choke laminated and other side balancing white lamination fixed with screwed and beading complete all as specified and directed.

M & L for 75mm thick PCC 1:3:6 type C2, (40mm graded aggregate) as in plinth protection laid in panels including finished the surfaces smooth and even without using extra cement all as directed and as specified.

M&L 75mm thick PCC 1:4:8 type D-2 as in sub base , floors, paving finished even and fair complete all as specified

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed

M & L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggreate) finished fair and even as in sub base flooring complete all as specified and directed

M& L for 25mm thick PCC 1:2:4 type B-0 as in sub base of tiles and surface even and smooth without using extra cement all as specified and directed.

M& L for PCC 1:2:4 type B1 using 20mm graded aggregate as in padding (level course) on roof surface averaging 40mm thick etc complete all as specified and as directed.

M&L for 60mm thickness M-35 grade with grey cement and no pigment. machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15650 - 2008 complete all as specified and as directed

M & L for rendering 15mm thick in CM 1:3 mixed with integral water proofing compound as per manufacturers instructions as in roof and and chajjas, finished the surface fair and even without using extra cement (Note:- supply of water proofing compound will be measured and paid separately) complete all as specified and as directed

Takiang down cement plaster/terrazzo finish on brick/RCC/stone wallsof any description including racking out joints hacking for keys scrubbing down with water etc, complete all as specified and as directed.

M&L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n. exc. 5 Sqm each pane complete all as specified

S & F 4mm thick figured glass pin head type and glazing oil putty in square panes n.exc 0.5 Sqm in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed

M&L preparatioin of new wooden surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed

M&L preparatioin of old wooden surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed

M&L preparing new steel surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete.all as specified and as directed.

M&L preparatioin of old steel surfaces of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed

S&F 15mm bore GI tubing medium grade with all fitting and fixed to walls or laid on floor complete all as specified and as directed

S&F 20mm bore GI tubing medium grade with all fitting and fixed to walls or laid on floor complete all as specified and as directed

S&F rotational molded polythene water storage tank with closed top fixed in portion 2000 ltr capacity incl fittings complete all as specified and as directed

S&F15mm dia bib tap cast copper alloy with cructh or butterfly handle screwed down for iron pipe or for brass ferrule complete all as specified and as directed

S&F pillars taps, cast copper alloy with capstan heads CP fancy type screwed down high pressure, with long screwleed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and as directed

S& F 15mm bore stop cock/angle valves cast copper alloy CP fancy type screwed down high pressure with crunch or butter fly handle, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and as directed

S & F in repairs, 15mm bore, stop valves, cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as specified and as directed

S & F in repairs 15mm bore stop valves fancy type chromium plated screwed both ends for iron pipe for unions and fixed with long shank and cup (concealed type) complete all as specified and as directed

Ball valve high pressure of PTMT 20mm dia epoxy coated almunium rod and high descity plastic ball screwed for iron pipe and fixed complete all as specified and as directed

S&F PVC connections 15mm size with PTMT nuts of length 600 mm all as specified and directed.

S&F 600 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, 75mm bore complete all as specified and as directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, 110mm bore complete all as specified and as directed

S & F 75mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S & F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S&F 110mm bore SWR bends any radius complete all as specified and as directed

S&F 75mm bore PVC SWR bends any radius complete all as specified and as directed

S&F 75mm bore PVC (SWR) branch piece with access door, single 'Y'/'T' equal or un-equal complete all as specified and as directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed

S&F 110mm PVC (SWR) WC connector with lip ring complete all as specified and as directed

S&F 110mm PVC (SWR) WC connector bend type complete all as specified and as directed

S&F 75mm dia, PVC (SWR) floor trap, plain with grating and jointing to waste pipe with solvent cement and fixed in PCC 1:2:4, type B1, complete all as specified and as directed.

Cutting into existing manholes for connecting new drain making good to pipe and rendering cutting out existing benching for and forming branch channel C1/2 round or 3/4 section) in cement concrete 1:2:4 type B 1 smooth finished and reforming benching complete all as specified and as directed

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including waste coupling and waste pipe and including bedding in cement mortar to dwarf wall or including fixing cantillever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

Demolition of brick work or stone boulders masonry built in Cement mortar (or) cement lime mortor including all quions, arches, pillars etc complete all as specified and as directed

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and asdirected.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed

Roughening surfaces of old concrete floor by picking sweeping cleaning & washing down with to remove dust etc incl removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 Kg/Sqm complete as directed by Engr-in-Charge.

S & f glazed ceramic tiles of size exc. 0.6 Sqm and not exc. 0.16 Sqm 7mm thick coloured tiles as approved by Engineer-in-charge incl Rendering 10mm thick in M 1:4 for bcacking coat for tiles complete all as specified and as directed

M&L for non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified & directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (Squared/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed of 15mm thick in CM 1:6 complete all as specified and as directed

Material & labour 5mm thick rendering in CM 1:3 on concrete surfaces in ceiling finished even and smooth complete all as specified and as directed

M&L glazed ceramic coloured tiles in vertical surface 300x200mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete in position laid on over 10mm thick screed in CM 1:3 on wall, complete all as directed and as specified by Engr-in-charge.

M&L rendering 15mm thick on concree or fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as directed and as specified.

Material & labour 15mm thick rendering in CM 1:4 mixed with water proofing asmixture as per manufacturer's instructions on dair fair faces of bricks wall or concrete surfaces finished even and smooth complete all as specified (WPC shall be measured and paid separetaly

M&L for rendering 15mm thick on concrete or fairfaces of brick work in CM 1:4, finished even and smooth without using extra cement but mixing WPC complete,all as directed and as specified (Note:- WPC measured and paid separately).

M&L for rendering 10mm thick in CM 1:3 rendering on cocrete surface such as ceiling chajjas etc finished evena and smooth (without using extra cement) all as specified and as directed.

M&L granite 20mm thick (of any type) work table robed & polished cooking platforms and like over 15mm thick screed bed or bedding in layer of CM 1;4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, and half moulded at one side complete all as directed and as specified by Egnr-in-Charge.

Material & labour 10mm thick rendering in CM 1:4 on concrete surfaces on roof slab mix with 3 % WPC finished even and smooth complete all as specified

Preparations of newly plasters surface of wall and applying two coats of ceement base paint over one coat of primer complete all as specified

M&L for complete removal of existing treatment and applying two coats of cement base paint over a coat of primer including preparation of old plaster surfaces of walls, complete all as specified and directed.

Preparations of newly plasters surfaces of wall and applying three coats of white wash complete all as specified

M&L for applying two coat of distemper oil emulsion on walls over a coat of primer over 3mm thick Birla wall care putty including preparation new wall surfaces complete all as specified and directed.

M&L for two coats of cement base paint over a coat of primer including preparation of newly plastered surfaces of wall complete all as specified and directed.

M&L for complete removal existing treatment and applying two coat of distemper oil emulsion on walls over a coat of primer over 3mm thick Birla wall care putty including preparation new wall surfaces complete all as specified and directed.

M&L for applying three coats of white wash on wall including preparation of new plastered surfaces complete all as specified and as directed.

M&L for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed.

M&L for applying one coat of white wash on ceiling including preparation of old decorated surfaces complee all as specified and as directed.

S&F 15mm bore tubes medium grade galvanised with all fitting and fixed concealed type complete to walls and ceilings or laid in floors 15mm bore including taking up or down steel tubing and connections, including cleaning for refixing (or) removed to store complete all as specified and as directed

S&F 20 mm bore tubes medium grade galvanised with all fitting and fixed concealed type complete to walls and ceilings or laid in floors 20mm bore including taking up or down steel tubing and connections, including cleaning for refixing (or) removed to store complete all as specified and as directed

Demolition of existing tank of any description and S&F 500 ltrs rotational moulded polythylene water storage tanks, cylindrical vertical with closet top hoisted and fixed in position all as specified in SSR Part-I including 20mm dia PVC high pressure float valve complete all as specified and as directed

S&F in repair bib tap 15mm bore, fancy type, chromium plated, cast copper alloywith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Materials and labour for 150mm dia salt glazed stone ware drain pipes laid over cement concrete type D 2 1:4:8 (using 40mm stone agg) for bed to 150mm dia drain pipes incl packing under and hunching against sides of pipes complete including necessary earth work as required at site all as directed by Engnr-in-Charge

S&F PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia all as specified and directed

S&F vitreous china bowl urinal flat size 465 x 355 x 265 mm white with grating and union for discharge pipe incl PVC waste pipe, urinal spreader complete all as specified and as directed

S&F vitreous china squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and directed. .

S&F in repairs water closet (squatting pan) complete including provision of lime concrete bedding 'Orissa' pattern size 508 x 440mm white, integral foot rests including flushing cistern and flush pipe, PVC connection of size 450mm complete all as specified and as directed by Egnr-in-Charge.

S&F in repair chromium plated swivel shower complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends for brackets, fitting with pillar tap fancy type 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32mm includkng waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F WHB vitreous china (flat back or angle back type ) ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe ,coupling ,PVC connection pipe and CP piller tap complete. all as specified and directed. .

M & L for PCC 1:3:6 type B0, (12.5mm graded aggregate) as in levelling course including weathering slightly rounded or chamfered angles and throating as directed complete all as specified and as directed.

M&L RCC Type A1 1:11/2:3 (20 mm graded aggregate) as in flootings and foundations for coloumns complete all as specified and as directed

M/L RCC Type A1 1:11/2:3 (20 mm graded aggregate) as in in slab supored on wall complete as directed

M/L RCC Type A1 1:11/2:3 (20 mm graded aggregate) as in chajja complete as directed

M/L RCC Type A1 1:11/2:3 (20 mm graded aggregate) as in beam coloum etc. complete as directed

M&L RCC Type A1 1:11/2:3 (20 mm graded aggregate) in coloumn, pillars, piers, posts and struts complete all as specified and as directed

S&F 2nd class hard wood in fillets, square, rectangular in section wrought, secured with nails sectional area exceeding 13 sq cm and n.exc 25 Sq cm fixed in repairs complete all as specified and as directed

S&F waste pipe PVC 32/40mm al as specified and directed

S&F kitchen plate rack made of stainless steel, complete all as directed and as specified by Engineer-in-Charge.

M&L rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished even and smooth without using extra cement. After plastering the sunken surface, sunken portion to be filled with water and tested for 72 hrs (after required peirod of curing) to observe leakage/seepages, leakge/seapage if any shall be arrested by pressure grouting and re-tested till leakages/seapages completely stopped. after ponding test, the surface shall be dried and bottom and sides of the sunken slab shall be treated, priming the plastered surface with bituminous primer conforming to IS-3384 @ 0.3 kg per Sqm and applying a tack coat of industrial butiumen 85/25 @ 1.2 kg per Sqm over which applying using glass fibre base bituminous felt type II and grade 2 (conforming to IS-7193 1994) and applying one coat of hot blown bitumen of grade 85/25 @ 1.2 kg per Sqm including 450mm long 25mm dia medium grade GI pipe shall be provided at the lowest portion Spout pipe should be 200mm from the external face of wall for draining out water in case of leakage. The joints in CI/GI/PVC pipes, nahani traps, WC and P/S trap connection shall be made leak proof. The gap around the pipes in walls/beams shall be properly filled and sealed with water proof joints fillers all as specified and directed by Engineer-in-Charge.

Materials and labour cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30Kg per Sqm followed by evenly a track coat @ 1.20 Kg per Sqm using with 85/25 grade industial bitumen, over it laid with APP modified plymer water proofing membrane with non-woven polyster reinforced of weight not less than 3 kg per Sqm unrolled and bonded to substrate with side and end laps 75mm as per manufacturesr's instructions and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous paint @ 0.200 kg per Sqm as per manufacturer's instructions complete all as specified and as directed

S&F 100mm long Stainless steel butt hinges (medium wt) with stainless steel hinge pin omplete complete all as specified and as directed

Supply, spread river sand of approval in cable trenches providing for cable cushioning as directed. NOTE :- Punned thickness of sand only will be measured and paid complete all as specified and as directed

Supply & Laying GI tubing light grade in protection of cable at roads crossing/hard standing/pole protection fixed with clamps as per site requirement etc all as specified and directed 40 mm dia.

Supply and fix gun metal gate valve ISI marked cast copper alloy screwed down high pressure with crutch or butter handle screwed both ends for iron pipe or for union and fixed completely as specified suitable for pipe 15 mm bore

S & F PVC connecting pipe 45 cm long with two nos brass check nuts and rubber washere suitable for 15 mm dia GI pipe for hot/cold water connection for geysers complete all as specified

Supply & Laying PCC cable covers for LT cable protection, Class LV, Type 1 of size 250x150x40mm complete all as specified and as directed

Supply & Laying on wall/in ground/on pole ISI marked XLPE insulated armoured, heavy duty, electric cable with aluminium conductors 1100 volts laid in trenches, floors, ducts, pipes drawn across the road/paths/drain/along poles/walls/floor/equivalent etc including jointing & testing complete all as specified of size 2 core 16 sqmm

Supply & Laying on wall/in ground/on pole ISI marked XLPE insulated armoured, heavy duty, electric cable with aluminium conductors 1100 volts laid in trenches, floors, ducts, pipes drawn across the road/paths/drain/along poles/walls/floor/equivalent etc including jointing & testing complete all as specified of size 3.5 x70 sqmm

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

M & L for concealed conduit point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for: (a) One light point controlled by one, one way switch 5A, SP

(b) One ceiling / exhaust fan point controlled by one, one way switch complete all as specified and as directed

(c) One light point controlled by two 2 - way switch 5 amps, SP complete all as specified and as directed

(d) One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed

(e) One 3 Pin 5 Amps switch socket Independt board complete all as specified and as directed

(f) One bell point controlled by one, bell push complete all as specified and as directed

Description all as per item No 151 here-in-before but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 5/15 Amps switch socket combination point including running of 4 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and as directed

S&F lamp holder insulated body surface bakelite with back plate suitable for angle/batten fittings including LED lamp of 9 Watt complete all as specified and as directed

S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts complete all as specified and as directed

S&F bell push 5 A flush type complete all as specified and as directed

S&F bell (ding dong) working on 230 volts AC Supply complete all as specified and as directed

Supply and fix socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts complete all as specified and as directed

Supply and fix switch socket combination flush type multipurpose 2/3 pin 5 Amps, 230 Volts complete all as specified.

Supply and fix switch socket combination flush type multipurpose 5 in 1, 5/16 Amps, 230 Volts complete all as specified.

S & F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed by Engineer in charge.

S and F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.

Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe med grade 15mm bore from earth elelctrode to test point incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipe med grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade complete all as specified and as directed

S & Fix ceiling fan regulator step type AC 240 volt suitable for 1200/1400 mm sweep complete all as specified and as directed

M & L for Submain wiring with 2 runs of single core 4 Sq mm PVC insulated FR copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC concealed conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length complete all as specified and as directed

M & L for Submain wiring with two single core 6 Sq mm PVC insulated FR copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC concealed conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

M & L for Submain wiring with 4 runs of single core 6 Sq mm PVC insulated FR copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC concealed conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified.

S & F Switch piano two way flush type 5 Amps capacity 230 volts complete all as specified and as directed

Supply & fix Exhaust fan metal body with louvers of 450 mm sweep and connecting up with PVC insulated copper conductor multistranded cable of suitable size and specification as provided by the manufacturer/company from ceiling rose to connector complete including cutting of wall in round shape and making hole suitable for mounting of 450 mm dia exhaust fan and making good disturbed surfaces matching with existing colour including grouting of nuts and bolts all as specified and as directed by Engr-in-Charge

Disconnecting and removing ceiling fan of 1200/1400 mm sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine and rewinding of the ceiling fan with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturers design and instructions including varnishing for ceiling fan complete including replacement of capacitor ,sealed ball bearing,rubber bushes, split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified.

S & F Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed by Engg-in-Charge.

M & L bracket made out of GI pipe of suitable dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and directed by Engg-in-Charge

S&F sheet metal enclosure vertical type MCB DB TPN 4 way double door with 200 Amps rated bus bar 415 volts suitable for and including 63 Amps TPN MCCB 16 KA as incommer and 12 Outgoing SP MCB's with magnetic locking system complete all as specified. Note: MCB SP Shall be measured and paid seperately, all as specified and directed by Engg in Charge

S & F MCB SP 230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specified and directed by Engg in Charge

S & F MCB SPN 230V suitable for fixing on MCB DB of capacity 40 Amps complete all as specified and directed by Engg in Charge

S & F wall mounted box type LED of 18/22 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete and as directed by Engr-in-Charge.

S&F 10 Watt bulk head luminaire suitable for outdoor with high brightness giving glare free light and including taking down all as directed by Engg in charge complete all as specified and as directed

S & F LED bed side light fitting with lamp capacity 7W, 6500K, adjustable type including all accessories and as directed by Engr-in-Charge. Make : Havells, Bajaj, Philips

S & F wall mounted LED batten of 09 watt with LED Lamp, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver complete all as specified and directed by Engg-in-Charge.

Provn of cable TV socket outlet point including conduit 20mm dia upto 15m long to reach out the intake point complete all as specified and as directed

Supply & fix Exhaust fan metal body with louvers of 300 mm sweep and connecting up with PVC insulated copper conductor multistranded cable of suitable size and specification as provided by the manufacturer/company from ceiling rose to connector complete all as specified and as directed by Engr-in-Charge.

Cutting of wall in round shape and making hole suitable for mounting of 300 mm dia exhaust fan and making good disturbed surfaces matching with existing colour including grouting of nuts and bolts all as specified and directed.

Cutting of bituminuous road / hard standing of size not exceed 30 cm in width and not exceeding 90 cm in depth for laying of UG cable/protection Pipe including making good the disturbed portion so as to match with the existing finishes with PCC 1:2:4 type B1 concrete all as specified.

S & F down rods of equired dia(15/20 mm) and length of suitable length complete suitable for ceiling fans of size 1200 mm sweep including clamps, nut & bolts as specified and as per site requirement.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

Supply and fixing metal type vertical mounted storage water Heater 4 stars rated powder coated body with vaccum and pressure release valve and snap action thermostst , thermal cutout , non return devices, of capacity 25 ltrs, 1.5 KW, 240 volts with plug top, confirming to IS:2082 complete all as specified and directed by Engineer in Charge.

M/S P.SWAROOP KUMAR

SAI RUPA CONSTRUCTIONS

K LAKSHMAN SINGH AND CO

BEEGEE DESIGN SYSTEMS

PARDEEP AND CO