ADDN ALTN TO BUILDING No P 26 OF CHILDREN SCHOOL AT SARAIBARI GENTS TOILET NEAR STAFF ROOM OF APS SCHOOL AT ROWRIAH AND SPECIAL REPAIRS TO ROOF OF BUILDING No T 11 and T 12 OF CERTAIN UNIT AT BHALUKMARA UNDER GE JORHAT

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

Dismantling timber scantling in unframed work, 40 Sq cm and over in section, in any position, complete all as directed.

Dismantling of timber boarding, any description, fixed in any position with screws complete all as directed.

Dismantling of Asbestos cement (corrugated, semi corrugated etc) sheets in roof covering complete all as directed.

Dismantling plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings,complete all as directed.

Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing, complete all as directed.

Surface dressing n.exe 15 cm deep in soft/loose soil complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil , complete all as specified and directed.

Excavating in post holes (or similar holes) in soft/loose soil, each n exc. 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc. 50 m and making good surface, complete all as specified and directed.

Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all as specified and directed.

Materials and Labour for, broken stone or boulder hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface , complete all as specified and directed.

Materials and Labour for plain cement concrete (1:4:8) Type D-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6), Type C2,using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

Materials and Labour for plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary from work complete all as specified and directed.

Materials and Labour for precast cement concrete, Type C1, 1:3:6 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar (1:6) , complete complete all as specified and directed.

Materials and Labour for reinforced cement concrete M-25 Design Mix, using 20 mm graded aggregates in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete ,complete all as specified and directed.

Materials and Labour for reinforced cement concrete M-25 Design Mix, using 20 mm graded aggregated in Chajjas, complete all as specified and directed.

Materials and Labour for reinforced cement concrete M-25 Design Mix, using 20 mm graded aggregated in Beams, cantilever, bressumers, lintels over 1.5M Span Complete all as specified and directed.

Materials and Labour for reinforced cement concrete M-25 Design Mix, using 20 mm graded aggregates in columns; pillars; piers; posts; struts etc complete all as specified and directed.

Supply only integral water proofing compound all as specified

Materials and Labour for 25mm thick damp proof in in cement concrete 1:2:4 type B-0 (using 12.5 mm graded aggregate) course to horizontal or vertical surfaces including necessary formwork, complete all as specified and directed

Materials and Labour for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m, complete all as specified and directed

Materials and Labour for,cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, in stone concrete block or slab walls, complete all as specified and directed.

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6), complete all as specified and directed.

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:4), complete all as specified and directed.

Materials and Labour for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM (1:4),complete all as specified and directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sided and soffits of plinth beams and similar works; vertical or to batter for rough finished surfaces of concrete, flat, complete all as specified and directed.

Use and waste of form work to chullah hoods, chajjas,troughs and similar items including edges for fair finished surfaces of concrete, flat, complete all as specified and directed.

Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings , girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete, flat, complete all as specified and directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete, square, rectangular or polygonal, complete all as specified and directed.

Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed.

Supply and Fix, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame,complete all as specified and directed.

Supply and Fix,solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing ,complete all as specified and directed.

Supply and Fix,18 mm thick Solid PVC Sandwich Panel with 1mm Plain PVC Sheet on both sides suitably fixed in frame work as per specification & drawing ,complete all as specified and directed.

Supply and Fix, Aluminium anodized barrel tower bolts of extruded section, 100 mm long complete all as specified and directed.

Supply and Fix, aluminium handles, cast type, anodized, 100 mm size, complete all as specified and directed.

Supply and Fix,stainless steel butt hinges (ISI Marked),100 mm size,complete all as specified and directed

Supply and Fix, aluminium anodised, tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

Supply and Fix, aluminium (die cast) body door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

Supply and Fix,double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed,complete all as specified and directed.

Supply and Fix,stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

Supply and fix mild steel TMT bars 6 mm to 8 mm dia., cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.

Supply and fix mild steel TMT bars 5 mm dia. and over up to and including 10 mm dia. in stirrups, spacers, binders etc. cut to length, bend to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.

Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165 complete all as specified and directed.

Materials and Labour for mild steel works, conforming to Fe 290, Grade E-165 , in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles, complete all as specified and directed.

Supply and Fix, mild steel rag or lewis bolts,diameter of neck 12 mm, screwed one end,with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 15cm long, complete all as specified and directed.

Materials and Labour for rolled mild steel,Fe 410-W (Grade E-250) Quality-A in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.,complete all as specified and directed.

Materials and Labour for rolled mild steel,Fe 410-W (Grade E-250) Quality-A in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment ,complete all as specified and directed.

Materials and Labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979,grade St.-240, complete all as specified and directed.

Supply and Fix, steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Supply and Fix, anodised aluminium frame, for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

Supply and Fix, anodised aluminium door shutters,side hung type, without sash bars, with top rail, styles, lock rail and bottom rail, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable barrel tower bolts of extruded section (2 No.) suitable handle (2 No.), lock (01 No), complete all as specified and directed.

Supply and Fix,anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21,100mm long (2 No.) suitable handle (1No.),complete all as specified and directed.

Supply and Fix, flyproof glazed aluminium, window and ventilator frame with shutters, with powder coating of any colour (Thickness of powder coating not less than 50 micron),sliding type, without sash bars,including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading,locking arrangements,handles,screws etc.,complete all as specified and shown on drawings. Notes:- (i) Sheet glass, aluminium grill and wire mesh will be measured and paid seperately under respective items in BOQ and all other items as specified and shown on drawing shall be deemed to be included in quoted rate. (ii) Overall size of opening will be measured.

Supply and Fix, expandable aluminium grill with powder coating of any colour (Thickness of powder coating not less than 50 micron), 7.1 mm thick, weighing 2.911 Kg/Sq M (Section Code 22603 of 'Jindal' or equivalent of Hindalco/Indal),complete all as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws,complete all as specified and directed.

Materials and Labour for exposed metal frame ceiling with 6mm thick high pressure steam cured (HPSC) non asbestos fibre reinforced cement designer building boards for fixing in 600 mm x 600mm grid with and including exposed metal frame using hot dip galvanised steel, exposed pre-coated ceiling suspension system of grid size 600 mm X 600 mm, with main runner ‘T’ section 24 mm (W) X 38 mm (H) X 0.40 mm (T), cross ‘T’ section 24 mm (W) X 28 mm (H) X 0.30 mm (T) , wall angle 24 mm X 24 mm X 0.43 mm (T) and suspended with 4 mm dia. GI hangers/wire fixed with steel dash fasteners from purlins/soffits spaced at 1200 mm centre to centre with butterfly clips, hold down clips, providing provisions for light fixtures, air conditioning diffuser and ducts, sprinklers, smoke detectors etc., complete all as specified and directed.

Materials and Labour for, glazed ceramic coloured tiles, 300 X 200 X 7mm thick, conforming to IS 15622, economy class, Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4), complete all as specified and directed.

Materials and Labour for,Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,conforming to IS 15622, economy class, Grade B IIa, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6), complete all as specified and directed

Material and Labour for, Vitrified Ceramic Tiles,light shade,10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M, on floors, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6), complete all as specified and directed

Material and Labour for,Vitrified Ceramic Tiles,light shade, 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 Sq M, on vertical surfaces of wall such as dados, skirting etc., set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4), complete all as specified and directed.

Material and Labour for chequered ceramic tiles, coloured, 12 mm thick (square/rectangular) area of each tile exceeding 0.06 Sq M but not exceeding 0.11 Sq M, conforming to IS 4457-2007, on floors, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour,over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6), complete all as specified and directed. MAKE:- (Johnson ‘Endura’/ Somany ‘Durastone’/ Regency ‘Duro’)

Material and Labour for machine pressed precast conctete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade,complete all as specified and directed.

Materials and Labour for 25 mm thick plain cement concrete (1:2:4) type B1 using 20 mm graded aggregates as in floor, complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding,complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C1 using 20 mm graded aggregates as in floor/plinth protection including finishing surface even and smooth without using extra cement , complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C1 using 20 mm graded aggregate as in floor/paving/hardstanding, complete all as specified and directed.

Materials and Labour for 100 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded aggregate as in sub base in floor/paving/ hardstanding,complete all as specified and directed.

Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green, complete all as specified and directed.

Materials and Labour for bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight, 10 mm wide and 30 mm depth as in joints for plinth protection, complete all as specified and directed.

Materials and Labour for rendering 10 mm thick, cement plaster, in cement mortar (1:4) on fair face of brickwork or concrete surface in walls, complete all as specified and directed.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on surface other than fair face of brickwork and finishing surface even and smooth without using extra cement, complete all as specified and directed.

Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Material and Labour for applying three coats of white wash to new plastered surfaces on walls including preparation of surfaces complete all as specified and directed.

Materials and Labour for applying applying two coats of distemper oil emulsion,white or tinted,to new plastered surfaces on walls including priming with alkali resistant priming paint andincluding preparation of surfaces, complete all as specified and directed.

Material and Labour for applying two coats of cement-based paint, white or tinted to new plastered surfaces on walls including priming with alkali resistant priming paint and including preparation of surfaces complete all as specified and directed.

Materials and Labour, two coats of 100% Acrylic Exterior Emulsion Paint, white or tinted, on walls over a coat of primer, including preparation of new plastered surfaces, complete all as specified and directed. (Berger Paints:Weather Coat XP Advance/Asian Paints:Apex Ultima/ ICI Paints: Dulux Weather Shield Max/ Jenson & Nicholson Pvt. Ltd.: Safeguard Optima)

Supply and Fix,3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sq M in each pane complete all as specified and directed.

Supply and Fix,4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sq M in each pane complete all as specified and directed.

Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

Material and Labour for 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I complete, all as specified and directed.

Materials and Labour for, Ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed complete all as specified and directed.

Supply and Fix, gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 20 mm bore, complete all as specified and directed

Supply and Fix, bib tap, cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, 15 mm bore and fixed, complete all as specified and directed.

Supply and Fix, stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

Supply and Fix, stop valves, cast copper alloy , fancy type, chromium plated, screwed down, high pressure with long shank and cup (concealed type), screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.

Supply and Fix, pillar taps, cast copper alloy, with capstan heads, fancy type,chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore,complete all as specified and directed.

Supply and Fix, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and directed.

Supply and Fix, waste coupling of PTMT (half or full threaded) (Minimum weight 45gms), for 32 mm bore discharge pipe,complete all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm,complete all as specified and directed.

Supply and Fix, vitreous china wash basin, white, flat back, size 550 X 400 mm excluding taps, waste chain and porcelain stopper, but including brackets,complete all as specified and directed.

Supply and Fix vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding, complete all as specified and directed.

Materials and Labour for Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm (minimum), white ,with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.

Suppy and Fix, Vitreous China urinal partition,white, of size 310 mm x 700 mm, terminating about 40cm above floor line,complete all as specified and directed.

Supply and Fix PVC valve less, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle, of capacity 10 Litres, including brackets, flush pipe, complete all as specified and directed.

Supply and Fix, 50 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe, complete all as specified and directed.

Supply and Fix, 110 mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches, complete all as specified and directed.

Supply and Fix, 110mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints,fixed to walls, complete all as specified and directed.

Supply and Fix, 110 mm bore UPVC (SWR) bends any radius,with access door, complete all as specified and directed.

Supply and Fix, 110 mm bore, UPVC (SWR) junction single, (Single T) equal or unequal, with access door,complete all as specified and directed.

Supply and fix 110 mm bore UPVC (SWR) vent cowl complete all as specified and directed.

Supply and Fix, PVC (SWR) floor trap, plain with grating including jointing with solvent cement with dia. of out let 75 mm, complete all as specified and directed.

Supply and Fix, UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.

Supply, laying, jointing and testing of,150 mm internal dia.,salt glazed stoneware drain pipes, conforming to IS 651:2007, class ‘SP1’, laid in trenches and jointed, complete all as specified and directed.

Materials and Labour for concrete bed to drain pipes 150 mm bore, including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type D2 (using 40 mm graded aggregate) complete all as specified and directed.

Cutting into existing manholes for connecting new drains, 150 mm internal dia of pipe, making good to pipe and rendering, cutting out existing benchings for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required, complete all as specified and directed.

Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC Conduit complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for, one light point or one fan point controlled by one switch, complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core,laid in and including PVC Conduit complete with all fittings and accessories, fixed to walls/ceiling,including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 pin socket outlet, 5 Amps on the same board with other switches,complete all as specified and directed. NOTE:- (Applicable to Serial Item No. 115 & 116 Here in Before): - The quoted rates are deemed to be inclusive of the rate for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth, in brick/concrete block walls.

Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC Conduit complete with all fittings and accessories, fixed to walls/ceiling,including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for, one light point or one fan point controlled by one switch, complete all as specified and directed.

Materials and Labour for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC Conduit complete with all fittings and accessories, fixed to walls/ceiling,including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 pin socket outlet 5 amps, independent,, complete all as specified and directed.

Materials and Labour for concealed type point wiring with 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC Conduit complete with all fittings and accessories, fixed to walls/ ceiling,including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for,one 3 pin socket outlet 15 amps, independent,, complete all as specified and directed. NOTES: -(Applicable to Serial Item No. 117,118 & 119 Here in Before): - (i) The quoted rates are deemed to be inclusive of the rate for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth, in brick walls. (ii) Metal Flush Box and Cover Plate with Frame for Modular fittings will be measured and paid separately under respective items of this BOQ.

Supply and Fix, switch piano, flush button, single pole, one way, 5 Amps, complete all as specified and directed.

Supply and Fix, socket outlet 2 in 1, 3 pin, 5A, complete all as specified and directed

Supply and fix Lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix Ceiling Rose, three terminal, PVC/ Polycarbonate insulated body, complete all as specified and directed.

Supply and Fix, Modular Metal Flush Box, 3 Module all as specified and directed. MAKE:- Legrand / Anchor/ Havells/ L&T

Supply and Fix, Modular Metal Flush Box, 6 Module all as specified and directed. MAKE:- Legrand / Anchor/ Havells/ L&T

Supply and Fix, Modular Metal Flush Box, 12 Module all as specified and directed. MAKE:- Legrand / Anchor/ Havells/ L&T

Supply and Fix, Modular, White, Cover Plate with Frame, 3 Module all as specified and directed. MAKE:- Legrand / Anchor/ Havells/ L&T

Supply and Fix, Modular, White, Cover Plate with Frame, 6 Module all as specified and directed. MAKE:- Legrand / Anchor/ Havells/ L&T

Supply and Fix, Modular, White, Cover Plate with Frame, 12 Module all as specified and directed. MAKE:- Legrand / Anchor/ Havells/ L&T

Supply and Fix, Modular Switch, one way, 6 Amps, 1 Module, complete all as specified and directed.

Supply and Fix, Modular Switch, one way, 16 Amps, 1 Module, complete all as specified and directed.

Supply and Fix, Modular Socket, 6 Amps, 2/3 Pin, 2 Module, complete all as specified and directed.

Supply and Fix, Modular Socket, 6 Amps/ 16 Amps, 2/3 Pin, 2 Module, complete all as specified and directed.

Supply and Fix, Modular Fan Step Regulator, 120 W, 2 Module, complete all as specified and directed.

Supply and Fix,10 W retrofit LED Lamp (Spiral B-22 base) complete all as specified and directed. [Cat No. LHLDEUEBML8Z010 of Make 'Havells' or equivalent Model of Make 'Philips'/ 'Eveready']

Supply and Fix,LED batten with fire retardant poly carbonate housing and opal poly carbonate diffuser, with white LEDs,1X20 W, with electronic driver complete with all accessories internally pre wired,including lamp,complete all as specified and directed. [Cat No. "20W T5 60K LED Batten" Code 6BP2608F020 of Make 'Eveready' or equivalent Model of Make 'Philips'/ 'Bajaj'/'Crompton Greaves']

Supply and Fix, LED panel 18 Watts, recess mounted down lighter,round, with polycarbonate housing and polycarbonate diffuser,lumen efficacy up to 100lm/W, CRI :>80,intregrated driver, THD:<20%, integrated colour temperature:6500K, surge protection:2.5 KV, operating voltage:220-240 V AC, Ta:-10°C to 45°C, complete all as specified and directed. [Cat No. "LED Panel 15 W 65 K RD Recess PC Backlit I " Code:6PP26I8RB18 of Make 'Eveready' or equivalent Model of Make 'Philips'/ 'Bajaj']

Supply and Fix in repairs, LED street light fittings, 15 Watts,CCT 5700°K,with single piece pressure die cast aluminium housing and secondary optics with individual LEDs,intregrated driver, surge protection 10 KV and degree of protection IP-65,including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.75 Sq mm, 3 core, 1100 Volts grade, from light fitting to point outlet,and including provision of fixing bracket made out of 25 mm bore galvanized steel tubing, medium grade, (1.5 RM Approx), bent to shape required and fixed to wall/pole with FI clamp 25 X 3 mm, nuts, bolts and washers complete all as specified and directed. [Cat No.LEDSLO15157-02, Code:"6R57PAA7015" of Make 'Eveready' or equivalent Model of Make 'Philips'/ 'Bajaj'/'Crompton Greaves']

Supply and Fix in repairs, LED street light fittings, 25 Watts,CCT 5700°K,with single piece pressure die cast aluminium housing and secondary optics with individual LEDs,intregrated driver, surge protection 10 KV and degree of protection IP-65,including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.75 Sq mm, 3 core, 1100 Volts grade, from light fitting to point outlet,and including provision of fixing bracket made out of 25 mm bore galvanized steel tubing, medium grade, (1.5 RM Approx), bent to shape required and fixed to wall/pole with FI clamp 25 X 3 mm, nuts, bolts and washers complete all as specified and directed. [Cat No.LEDSLO25157-02, Code:"6R57PAA7025" of Make 'Eveready' or equivalent Model of Make 'Philips'/ 'Bajaj'/'Crompton Greaves']

Supply and Hanging, ceiling fan 1400 mm sweep ,240 V, 50 Hz, Single Phase, ISI Marked (IS: 374) including down rod, canopy, fan blades and accessories, including connecting up with and including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 Sq mm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan complete all as specified and directed. [Model “Velocity ES-50 ISI Mark” of Make ‘Havells’ or equivalent Model of Make ‘Usha’/’Crompton Greaves’/ ’Almonard’]

Supply and Fix, Heavy Duty Exhaust Fan, 300 mm sweep, Single Phase, 230 V, 50 Hz, 90 Watt power consumption totally enclosed highly efficient heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings,1400 RPM with Air Delivery 1950 CuM per Hour, Noise Level 45dB-50 dB, conforming to IS: 2312 including connecting up with and including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 Sq mm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan complete all as specified and directed. [Model “Turbo Force” of Make ‘Havells’ or equivalent Model of Make ‘Usha’ / ’Crompton Greaves’/ ’Almonard’ ]

Supply and Fix, Heavy Duty Exhaust Fan, 380 mm sweep, Single Phase, 230 V, 50 Hz, 145 Watt power consumption totally enclosed highly efficient heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings,1400 RPM with Air Delivery 3700 CuM per Hour, Noise Level 55dB-60 dB, conforming to IS: 2312 including connecting up with and including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 Sq mm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan complete all as specified and directed. [Model “Turbo Force” of Make ‘Havells’ or equivalent Model of Make ‘Usha’ / ’Crompton Greaves’/ ’Almonard’]

Materials and Labour for concealed sub main wiring with two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade and continuous earth wire of two single core FRLSH PVC insulated, unsheathed cable 2.50 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in PVC conduit, complete all as specified and directed. NOTE : The quoted rates are deemed to be inclusive of the rate for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth, in brick/concrete block walls.

Supply and Fix, double door, sheet metal enclosure for DBs for mounting of MCB for 240 Volts, 4 way, with 200 Amps rated bus bar, Single Pole & Neutral, complete all as specified and directed. [Cat No.DBSPN004DD of Make L&T or equivalent Model of Make Legrand/Siemens]

Supply and Fix, double door, sheet metal enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 200 Amps rated bus bar, Single Pole & Neutral, complete all as specified and directed. [Cat No.DBSPN008DD of Make L&T or equivalent Model of Make Legrand/Siemens]

Supply and Fix, miniature circuit breaker (MCBs) single pole, 240 Volts, 10KA, 6 to 32 Amps complete all as specified and directed. [Cat No BB10060C/BB10100C/BB10160C/BB10200C/ BB10250C/ BB10320C of Make “L&T” or equivalent Model of Make Legrand/Siemens]

Supply and Fix, miniature circuit breaker (MCBs) double pole, 240 Volts, 10KA, 40 Amps complete all as specified and directed. [Cat No.BB20400C of Make “L&T” or equivalent Model of Make Legrand/Siemens]

Supply and Laying galvanized steel tubing, 40 mm bore, light grade, in trenches or fixed to poles/Walls etc., for cable protection, complete all as specified and directed

Supply,laying, jointing and testing of , XLPE insulated, PVC sheathed, armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of cross sectional area 25 sq. mm 2 core,complete all as specified and directed.

Supply and filling in dry sand in cable trenches before and after the cables are laid, as in sand cushioning to cables, complete all as specified and directed.

Supply and laying common burnt clay building bricks, sub-class ‘B’ designation 75, old size bricks, in cable trenches, as cable protection, complete all as specified and directed.

Materials and Labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanised steel earth lead wire 4 mm dia. by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009)

M/S DHAR AND DHAR