Loading…
Loading…
Tender Value
₹6.0 L
EMD Value
₹5,992
Closing Date
15 Jun 2026, 4:00 pm
Executive Engineer, PH Division, Karimnagar
Near Ujwala Park Filter bed premises
Construction of SC Community Building at Pochamma Temple in W.No.14 in Jagtial Municipality Under TUFIDC-Phase-II
706254
2007/T4/NIT/EEPHKNR/2026-27, 4-6-2026
OPEN
Civil Works
JAGITIAL
9 documents required · 9 mandatory
₹213
₹5,992
6 Jun 2026
6 Jun 2026
8 Jun 2026
Earth work excavation and depositing on bank with and initial lead of 10 mts and lift of 2 mts for loamy and clayey soils like blank cotton soils, red earth and ordinary hard gravel, soil for foundation including cost of labour, materials equipment etc., complete as per specifications and drawings or as directed by the Engineer-in-Charge For CC Flooring
Carting of earth work excavation for lead of 4 Km including transportation, all operational and incidental charges, loding and unloading charges etc., complete for finished item of work
Collection, supply and spreading of quary spell including watering, rolling with HRR in irrespective of thickness in layers etc complete excluding seignorage charges. For CC Flooring
Plain cement concrete (1:4:8) using 40 mm metal with Concrete mixture work up to plinth levelincluding cost and conveyance of all materials and labour charges etc complete complete excluding seignorage charges. For CC Flooring
RCC prop. M 20 grade concrete using 20 mm grade hard granite metal with necessary reinforcement including cost and conveyance of all materials labour charges equipments etc., complete but excluding cost of steel, binding wire and fabrication charges but including centering, machine mixing vibrating, finishing, curing and placing, cost of cement, formwork, etc., complete for columns, footings, plingth beams, as per specifications and drawings as directed by the Engineer-in-Charge for finished item of work. complete excluding seignorage charges. Plingth beams
Columns: ii) Above plinth level
Brick Masonary 2nd class ground moulded or treditional size 23x11x7 cm in Cement Mortor 1:6 Prop including cost & conveyance of all materials like Cement, Sand, Bricks, Water, etc., to site cost of Seigniorage charges on all materials, including all labour charges like mixing Cement mortor, scaffoding charges, lift charges, curing charges etc., complete for finished item of work i) For Compound Wall
Plastering with CM 2 coats, 12 mm thick in two coats base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with sponze finishing including cost and conveyance of all materials and labour charges etc complete but excluding seignorage charges.
Painting to walls in two coats with Plastic emalsuion of good quality and colour over one cent of cement primer including surface preperation with putty etc., complete to give smooth and even surface including cost of materials, labour complete as per standard specifications
Providing imprevious coat to exposed RCC roof slab surface with CM (1:3) with 1 kg. of water proof compound per bag of cement land over roof when it is green including cost of conveyance of all materials and labour charges seginorage charges all operational incidental and labour charges for mixing mortor laying rendering smooth and thread lining, curing, rounding off
Supply of Non-skid red or white full body Ceramic floor tiles of size 400 x 400 mm and thickness between 7-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs in all shades and designs set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work
Supply and delivery, cutting and bending and typing in position, ribbed Tor steel and mildsteel in position including cost of steel and its fabrication charges as per specification and drawings and or as directed by the Engineer-in-charge of the work for finished item of work including cost and conveyance of all materials and all labour charges etc., complete For Plingth beam For Columns
Manufacture supply and fixing of MS Gate with Arch with colouring including cost and conveyance of all materials and labour charges etc complete.for finished item of work. For Gate For Grills
Providing and fixing of Two shutter Sliding Windows made of Galvanized Steel as per IS 513, D quality, galvanized as per IS 277 with powder coated with Pure polyester powder up to 50-60 microns thick with total coated thickness of 0.8 mm for Outer Frame and 0.58mm thickness for Sliding Shutter Section, the Outer Frame for Two Tracks with Grillprovision size of 90 mm x 50 mm and the Window Shutter section of 58 mm x 36 mmand the outer Frame with two integrated guide tracks of 12mm width and 24mm deepfor provision to slide the Shutter / sash frame and facilitates with a water drain outletcomponent made of PVC and the shutter frame fitted with 5mm thick plain float glassof reputed make and fixed with EPDM weathering seal resistant accessories andhandle made of Aluminium 1 No. per each shutter including installation of windowsystem at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection atsite with complete finished item of work for Window with Two Sliding Shutters and with Grilletc Complete.
Supply & Fixing of 1.50 Sqmm HFFR PVC insulated 1100V grade as per IS:694 /2010 specification for Copper cable. Makes : Khanthi / Vimal / Stanjo /Orbit / Marison/ Q-FLX / Vasura / Corus / Vasavi inlcuding all labour charges etc., complete.
Supply & Fixing of 2.50 Sqmm HFFR PVC insulated 1100V grade as per IS:694 /2010 specification for Copper cable. Makes : Khanthi / Vimal / Stanjo /Orbit / Marison/ Q-FLX / Vasura / Corus / Vasavi inlcuding all labour charges etc., complete.
Supply and transportation of 20W +/-10%, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF≥0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500Kas desired by the department and as per IS specifications, minimum CRI≥80,.etccomplete with 5 years warranty with BIS Certification.LUMINAIRE MAKE: Phillips /OSRAM / Wipro / Crompton / Bajaj /Havells / Jaquar / IB LED / Panasonic /Halonix / HPL / Syska / Eveready / Surya/ Keselec/ FIEM / Arraystorm / GM / Goldmedal
Supply, Transportation of energy efficient fan, 1200 mm sweep, aluminiumbody, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation:B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, safety rope,copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greaterthan 8.5, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019),THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm,suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete.Makes : Atomberg (Efficio ) / Havells /Orient / Halonix
Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C/ brick massonry chamber of 450m x 450m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.
Supply of 10sqmm WPTC (Weather Proof Twin Core) ISI mark AlluminiumWire. Makes : Polycab / GM / Million / V-Guard / Gold Medal / Kundancab / HPL / RPG / Nandicab / Nakoda / Payal / Finecab / Gemini / Vimal / Suncab / Stanjo / Rajnigandha / Orbit / Airson / Beljin / Savera Champion. / Rhino / Pawancab
Supply and fixing of ISI marked 9 Nos 10A Modular type switches, 3Nos 10A 3/2 pin wall plug sockets on 12 Modular box with cover frame including connections, cost and coveyance of all material and all labour charges etc., complete for Computers in N.R.B. / R.B.Accessories Makes : Legrand Myrius /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / GM Four Five.
Supply and fixing of ISI marked 5 Nos 10A Modular type switches, 1Nos 10A 3/2 pin wall plug sockets on 6 Modular box with cover frame including connections, cost and coveyance of all material and all labour charges etc., complete for Computers in N.R.B. / R.B.Accessories Makes : Legrand Myrius /Goldmedal Curve/ Anchor Roma viola / Havells Fabio / Panasonic Vision / GM Four Five.
Supply of BLDC exhaust fan with necessary accessories etc.,complete Makes : Atomberg / Crompton /Havells / Orient / Goldmedal / GM. 250mm Dia
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ- Community building.xlsx
TENDER_DOCUMENT • 1.06 MB
NIT Doc.pdf
TENDER_DOCUMENT • 2.34 MB
Volume-II-Community building.doc
TENDER_DOCUMENT • 0.37 MB
Download all tender documents and submit your bid