LIFT IN ADDITIONAL CIRCUIT HOUSE AT KANCHEEPURAM

Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of 1 no 8 persons capacity Gearless Without machine room with Glass Panels, Disable friendly Microprocessor Based Controller VVVF Drive, Fire rated doors and ARD passenger lift as per the following specifications including taxes and duties. ( Make : KONE, JOHNSON /Equivalent ) 1.Location: (Addl. Circuit House Buildings in Collectorate Campus at Kancheepuram in Kancheepuram District), 2.No of lift: one no, 3.Type of lift: passenger (Machine Room Less model )C 4.Capacity of lift: 8 persons / 544 Kgs, 5.Speed: 1.5mtr / secC 6.Type of drive: V3F drive with enhanced ride comfort and near zero level functionsC 7.No of floors: GF+1Floor, 8.Total travel: 3 .3+3.3 =6.6Mts, 9.Leveling accuracy: high level accuracy with smooth and jerk free stopping, 10. Construction of CAR: No 3 hardened sheet high quality stainless steel car and hand rail granite flooring and Perspex false ceiling., 11. Position of machine: directly above the lift well, 12. No of landing service: Front side-2 No’s, 13. No. of car entrance: one in the front side only, 14. Car entrance door: power operated automatic V3F drive center opening sliding SS door, 15. Landing entrance door: power operated V3F drive center opening sliding SS door with provision for emergency exit key at all landings,

16.Size of Lift Well 2200 X 2200 X (MM Wide * MM Depth), 17.Lift pit:1600 mm, 18. Lift Car Inside Size 1300 X 1350 X (MM Wide * MM Depth ), 19. Clear opening of Gates / Doors / Lintel : 1000 X 2000 (MM Wide * MM Height) Lintel - 2100 mm, 20.Lift machine room size: Nil, 21. Power supply: AC 3 PHASE, 50 CYCLES, 415 VOLTS ±10%, 22.Control: micro computer (micro processor):based simplex collective control with / without attendant, 23. Car fittings: CFL lighting with 1 no 300 mm sweep cabin fan, 24. Lift well: RCC construction with brick masonry to be constructed by PWD civil wing, 25. Induction: UP / DOWN digital direction and position indicator for all landings and inside the car. 26.Emergency alarm bell: battery operated bell to be provided with automatic charging device, 27.Emergency light: battery operated light to be provided with automatic charging device, 28.Fire mans switch: to be provided at the GF, 29. Minor builder works: to be provided by the lift contractor, 30. Scaffoldings: to be provided by the lift contractor, 31. Sill angles and facia plates: SS to be provided by the lift contractor, 32.Steel for lift machinery: to be provided by the lift contractor, 33.Servicing and maintenance: free comprehensive servicing and maintenance for one year Guarantee period to be provided by the lift contractor,

34. Automatic rescue device: to facilitate the landing of the nearest floor at the time of power failure this shall consist of suitable battery system with charger inverter under voltage protection system etc. complete with all accessories, 35.Provision for intercom with phone: to be provided by the lift contractor, 36.Lift license: preparation of drawings payment of charges to CEIG and insurance policy if any and obtaining CEIG approval for the lift as per lift act should be done by the lift contractor, 37. Floor position announcer: to be provided by the lift contractor, 38.Special features a) Infra red door sensor with full height screen, b) Full width half height rear panel mirror, c)Tubular SS hand rail in car, d) Stainless steel signal features, e) Vandal proof SS button with SS cover, f) SS door frames for landing doors, g) V3F door operator, h)Call register signal, i) Stainless steel facia plates for car operating panel and landing fixtures, j) Steel ladder for lift machine room, k) On / off switch for fan and light, l) Over load warning indicator with audio announcer, m)Voltage stabilizer for control circuits n)Braille button, 39.Over speed governor phase failure and phase reversal relay alarm bell T guide brackets for car and counter weight rubber padding under the winding unit motor of adequate capacity signal reduction worm gear electromagnetic brake with compression springs car safety gears buffers

electro mechanical locks emergency key side supporting angles motor over load protection devices final limit switch main suspension ropes counter weight lifting joist for mounting the machineries, 40. Guarantee: guarantee at least for one year for the material and workman ship of equipments should be offered by the lift contractor, 41. Site testing in accordance with IS 14665 should be carried out at the time of handing over to the user department, 42.Supply operation and maintenance manual and necessary tools for operation and a set of Spare parts required for one year. ( Make : KONE, JOHNSON /Equivalent )

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling and switch drop portion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator) ( 5 points / Coil) Lower End

Supply and fixing of single box type 4' 20 W LED fitting complete with TW round blocks on wall or ceiling with 20 W LED tube light with Single side connection with PVC unsheathed Copper leads from terminals to the fitting. ( Havells Crompton/equivalent)

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL.

Supply and fixing of 2 nos.6A two module 3 pin socket , 2 nos. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and fixing of 100A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.

Supply and run of 1 of No.8 SWG GI wire for earth connection

Supply and clarnping of 3.5x70sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and frxing of brass cable gland for 3 1/2x70sqmm PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2x70sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Please Enable Macros to View BoQ information