Shifting and ITC of 1 X 40 KVA EA set without canopy from TE Hullahalli under Mysore BA to Yellapur under Karwar OA

Amount

Shifting and ITC of EA set

Shifting of 1 No. 40 KVA DG set from Hullahalli, Mysore to Yellapur under Karwar with all its accessories like Control panel, Fuel tank, Residential Silencer, Exhaust pipe etc in a single suitable transport vehicle of total ONE WAY distance Approx 500 Kms by engaging enough labourers for dismantling of all Accessories of DG Set, disconnecting all cables, earth connections, towing, lifting, loading at Hullahalli exchange and unloading at Yellapur BSNL exchange without any damages, positioning these DGs at earmarked location/ DG room etc as reqd.

Installation, Testing and Commissioning of above DG set of 40 KVA along with all existing accessories i/c placing the above DG set at desired place / engine foundation, Carrying Out B-check Oil Servicing of DG by engaging DG mechanic with existing consumables like 15W40 Lube Oil, Fuel filters, Lube Oil filter etc, draining out old Engine oil from the sump, filling new Oil, replacing Fuel and Oil filters, tightening all the bolts & nuts to the reqd torque, applying petroleum jelly on battery terminals , checking the V-belt tension, Opening and cleaning of AirFilter assembly, making connections of all existing Power cables and Control Cables, making Earthing Connections, Carrying out initial test running the DG for its healthiness i/c cleaning the set, removing the AVR connections from the alternator, connecting the batteries, removing air lock in fuel lines, starting the DG, checking for any abnormalities, if found normal, induce the excitation voltage through AVR, checking the output voltage of alternator, Dynamo Output, Exhaust Fumes etc, testing on no load & on existing Exge load, speed, voltage regulation, functional parameters, tuning the same etc as reqd. (Consumables like oil, filters will be paid in separate item) a) 40 kVA DG set at Hullahalli Mysore without Canopy

Supply of the following consumables / spares for the Engine during servicing / repair works, testing complete as required. Make :- Kirloskar/Castrol/ Servo / Simlr Supr make & grades. a)15W-40 and Above grade Lube Oil.

b)Lube Oil Filter with 'O' Ring for 40 kVA Engine Lube Oil filter Element

c) Set of Diesel Filters (Pre & Micro) with 'O' Ring for 40 kVA Engine

d) V' belts of Suitable Size AX-28/AX-32/ AX-40 / AX-45

Supply and Laying of 1x25 Sqmm PVC insulated Sheathed Multistrand Copper Conductor Cable colour coded Red for +ve & Black for -ve for extension of Battery Supply etc as reqd.

Replacement of Hydraulic Rubber Fuel hose pipe of size 5/16" and length as per site requirement made of quality rubber with medium reinforcement layer and Banjo bolts and surclips to arrest the diesel leakages etc as reqd. (Make: Polyhose or ISI approved)

Supply and Fixing of Metal Braided flexible fuel hose pipe consists of a synthetic-nitrile inner tube with a partial stainless steel reinforcement inner braid with Banjo Bolts & washers etc. up to 2.5 feet long.

Supply and Fixing of PVC Braided flexible fuel pipe with Banjo Bolts & washers etc. up to 2.5 feet long.

Repair of faulty 12 Volts Dynamo of DG set i/c transportation to work shop to & fro, replacement of Commutator, set of carbon brushes with cutouts, fixing the same to the DG set and testing, checking the output voltage complete etc as reqd.

Repair of faulty 12 Volts Starter of DG set i/c transportation to work shop to & fro, replacement of Bentex, Rectifier, set of Bearings, Shaft fixing the same to the DG set and testing, complete etc as reqd.

Supply and Fixing the Electronic type Automatic Voltage Regulator suitable for 40 KVA and Above Capacity alternator etc as reqd. (Make : OEM/ Swastik or Approved Make)

Servicing and Calibration of Fuel Injection Pump at nearest MICO service station / Workshop i/c checking the fuel pumping system, timing, quantity for 40 KVA DG sets i/c submission of test results of service station etc as reqd.

SITC of 12 Volts, 20 Amps battery Charger SMPS type to charge DG set batteries suitable for operation on 230 V, 50Hz Input AC supply of range 170V to 270V, Output 13.3V to 13.8Volts DC, with protections for Over current, Over Charging, Reverse Polarity complete with power supply cable, termination points and other accessories etc i/c supply of heavy duty charging crocodile clips-2Nos etc complete as reqd. (Make: NHP or SS make)

Supply and Laying of 3x4.0 Sqmm PVC insulated Sheathed Multistrand Copper Conductor Cable in existing PVC pipe for Battery Charger connection etc as reqd.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a)25mm Dia PVC Conduit

Modification of Existing Exhaust line work with suitable MS flanges, MS pipes, allied gaskets, fastners and other associated works i/c fabrication like cutting, joining, welding etc Prdg Asbestos roping etc for following capacity DG set as reqd. a)40 kVA DG set

SRI DEVI ELECTRICALS (BID ID -764208)