REPAIRS TO WOODEN, PVC AND ALUMINIUM JOINERY AT CERTAIN MD OTM ACCN OF AREA I AND IV AND REPAIRS TO WALL FLOOR TILING, SAINITARY FITTINGS, LEAKAGE SEEPAGE OF TOILETS, BATHROOM KITCHEN AT CERTAIN MD AND OTM ACCN OF AREA IV AND V OF AGE BR (WEST) AT

Amount

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) not exceeding 1.50 Sqm each complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and directed.

Material and labour for plain cement concrete, type B1, 1:2:4 (using 20mm graded stone aggregate) as in hold fast , bed plates and all other similar works complete all as specified and directed.

Supply and fixing mild steel work in hold fasts, wall ties, pintle hinges and all other similar small articles conforming to Fe-290, Gde-E-165 complete all as specified and directed.

Taking down cement plaster of any description & thickness from brick/ concrete/stone wall surfaces, including racking out joints, hacking for key and scrubbing down with water etc and removing debries out side MD land complete all as specified and directed.

Material and labour for 15 mm thick plastering in cement mortar (1:6) on brick work/ RCC wall and finish the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint complete all as specified and directed. Make: Asian Paints (Royale Luxury Emulsion Brand) or equivalent in Berger paints/ Nerolac / Shalimar as approved by GE.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exceeding 1.50 sqm and not exceeding 4.00 sqm each complete all as specified and directed.

Taking down shutter of any description area exceeding 1.00 sqm and not exceeding 2.00 sqm each complete all as specified and directed.

Taking down shutter of any description area not exceeding 1.00 sqm each complete all as specified and directed.

Supply and fixing for 2nd class hard wood plain, solid,straight chowkhat and frames, wrought framed, rebated on the solid rounded or chamfered, put together with glue pinned at joint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treating ends of posts, back of chowkhats etc. area tarred exceeding 0.1 sqm but not exceeding 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treating small articles such as holdfast, end of post, back of chowkhats etc. area tarred exceeding 0.1 sqm but not exceeding 0.5 sqm each and treated with tar or coal tar black paint complete all as specified and directed.

Supply and fixing 35 mm thick, 2nd hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board with commercial face veneers fitted to chowkhats complete all as specified and directed.

Supply and fixing 2nd class hard wood, 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) fitted to chowkhats complete all as specified and directed. (Note : Glass /gause will be measured and paid separately)

Supplyand fixing 2nd Class hard wood, Glazed and skelton shutter 30mm thick open rebated and prepare to receive glass, gauge etc with sash bars divided into square with plain chemfered or rounded mitred and rebated sash bars any member as in windows / ventilator stilles and rails provided as per SSR part -I Section 8 clause 8.24 (b), fitted to chowkhats complete all as specified and directed.

Supply and fixing 30 mm thick flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides complete all as specified and directed.

Supply and fixing in repair 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type as in cupboard shelves and cupboard shutter fixed with screws to timber frame work with 1st class hard wood leaping all around complete all as specified and directed.

Supply and fixing 100 mm size butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.

Supply and fixing 75 mm size butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.

Supply and fixing mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

Supply and fixing 200 mm length aluminium anodised, barrel tower bolt, extruded section complete all as specified and directed.

Supply and fixing 150 mm length aluminium anodised, barrel tower bolt, extruded section complete all as specified and directed.

Supply and fixing 125 mm hasp and staplees, safety type aluminium anodised with MS hinges pin including bolt to hing plate and fixed with screw complete all as specified and directed.

Supply and fixing 150 mm long aluminium handles, cast type, anodised complete all as specified and directed.

Supply and fixing 75 mm long aluminium handles, cast type, anodised complete all as specified and directed.

Supply and fixing 300mm long aluminium alloy, anodised sliding door bolt with haps, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Supply and fixing 3 mm thick sheet glass, ordinary quality with oil putty in square not exceeding 0.5m in each pane complete all as specified and directed.

Supply and fix stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fix 150 mm size aluminium plate type II, gate and shutter, hookes and eyes complete all as specified and directed.

Supply and fix in repairs 40 mm dia, cupboard knobs (sample as approved by GE) fixed with nuts screws and washers of brass, polished complete all as specified and directed.

Supply and fix in repairs aluminium (extruded section) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including use of scafoldings for any height of bldgs complete all as specified and directed. Make : Asian paint (Royale Luxury Enamel Brand) / or equivalent in Berger paint / Nerolac / Shalimar as approved by GE.

Material and labour for preparation of old decorated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary paint tint) (each coat) over a coat of pink primer including use of scafoldings for any height of bldgs complete all as specified and directed. Make : Asian paint (Royale Luxury Enamel Brand) / or equivalent in Berger paint / Nerolac / Shalimar as approved by GE.

Dismantling structural steel works including doors, gates, grills but excluding framed trusses etc complete all as specified and directed.

Material and labour for framed work such as grills etc with ends of bars shouldred and or riveted or forged into spike; framed guard bars and all other similar work conforming to Fe-290, Gde - E-165 complete all as specified and directed.

Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

Supply and fixing 1.00 mm thick MS plain, black sheet in wall clading, steel gates and all other similar work complete all as specified and directed.

Material and labour for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of alkyd anti corrosive primer complete all as specified and directed. Make : Asian paint (Royale Luxury Enamel Brand) / or equivalent in Berger paint / Nerolac / Shalimar as approved by GE.

Supply and fixing in repair 1.00 mm laths thickness steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of alkyd anti corrosive primer, erected in position as indicated complete, push pull or manual type complete all as specified and directed.

Material and labour for preparation of new steel surfaces and applying two coats of Epoxy polyurethene paint on steel surfaces for rolling shutters complete all as specified and directed.

Supply and fixing safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

Material and labour for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 140 mm, complete all as specified and directed.

Supply and fixing in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Taking down aluminium frames with shutters (without taking off shutters from the frame) area exceeding 1.50 sqm and not exceeding 4.00 sqm each complete all as specified and directed.

Taking down aluminium frames with shutters (without taking of shutters from the frame) area not exceeding 1.50 Sqm each complete all as specified and directed.

Supply and fixing powder coated aluminium frame of any approved colour (minimum thickness of powder coating 50 micron) for doors/windows/ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fixing powder coated any approved colour (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, fixed / sliding type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, locks, anodised alumnium snap beading, screws etc. complete all as specified and directed.

Material and labour for 4.0 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gasket in square, exceeding 0.5 sqm in each pane frosted on one side complete all as specified and directed.

Supply and fixing in repair aluminium anodised grill design No DG-117,10 mm thick including F Sections, 15 micron power coated any approved colour, complete all as specified and directed. Make :- M/s Deco grill / M/s Royal grill, sample as approved by GE.

Supply and fixing in repairs Mortice night latch, size 65 mm, mild steel, 4 levers complete all as specified and directed. Make:-Godrej or equivalent, sample as approved by GE.

Supply and fixing in repair 20 mm dia decorative fancy type curtain rods chromium plated anodised aluminium alloy (sample as approved by GE) and all other connected works complete all as specified and directed.

Supply and fixing in repair 20 mm dia decorative fancy type chromium plated anodised aluminium alloy curtain rod brackets (sample as approved by GE) complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the primises to outside MoD land complete all as specified and directed.

Material and labour for light shade vitrified coloured Ceramic tiles, 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Make :-Kajaria / Euro tiles /Johnson & Johnson, sample as approved by GE.

Material and labour for light shade vitrified coloured Ceramic tiles, 10 mm thick (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Make :-Kajaria / Euro tiles /Johnson & Johnson, sample as approved by GE.

Material and labour for Non Skid coloured ceramic tiles, 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. Make :-Kajaria / Euro tiles /Johnson & Johnson, sample as approved by GE.

Material and labour for Screed bed or bedding layer 15 mm thick in CM (1:6) for laying floor finishes like tiles etc complete all as specified and directed.

Material and labour for rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

Material and labour for glazed digital coloured ceramic tiles 300x450x7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed. Make :- Kajaria / Euro tiles /Johnson & Johnson, sample as approved by GE.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified and directed.

Material and labour for machine cut, polished cudappah stone work 20 to 25 mm thick (sample as approved by GE) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing as in kitchen platform, flooring and all other similar works, including laying over and including 15mm thick cement mortar (1:4) complete all as specified and directed.

Material and labour for granite (of any approved colour, sample as approved by GE) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring, cill and all other similar works complete all as specified and directed.

Taking up or down steel tubing and connection, 15mm dia bore complete all as specified and directed.

Taking up or down steel tubing and connection, 20mm dia bore complete all as specified and directed.

Fixing only old 15 mm dia bore steel tubing with new fittings, including cleaning in positon, cutting, threading, fixed on walls, ceiling and floor etc, complete all as specified and directed.

Fixing only old 20 mm dia bore steel tubing with new fittings, including cleaning in positon, cutting, threading, fixed on walls, ceiling and floor etc, complete all as specified and directed.

Supply and fixing GI tubing 15mm dia bore, medium grade with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed. Make: Jindal / Tata / Swastik.

Supply and fixing GI tubing 20 mm dia bore, medium grade with all fittings and fixed to wall and ceiling or laid in floors complete all as specified and directed. Make: Jindal / Tata / Swastik.

Supply and fixing in repair vitreous China wash down water closet pan (pedestal pattern) white including trap, connection to drain and flushing pipe (excluding flushing cistern) including seat cover for pedstal pan complete all as specified and directed. Make : Cat Part No S1050102 of Cera or Equivalent in Hindware / Prayag, sample as approved by GE.

Supply and fixing in repair vitreous China wash basin white, flat back, size 580x450 mm including cutting for pinning in ends of brackets, complete all as specified and directed. Make : Cat Part No S2040139 of Cera or Equivalent in Hindware / Prayag, sample as approved by GE.

Supply and fixing in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. Make : Cat Part No B1010106 of Cera or Equivalent in Hindware / Prayag, sample as approved by GE.

Supply and fixing in repair 15 mm bore, fancy type, angular valve, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 204 or Equivalent of Jaquar/ Prayag, sample as approved by GE.

Supply and fixing in repair 15 mm bore, fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 332 or Equivalent of Jaquar/ Prayag, sample as approved by GE.

Supply and fixing in repair PVC connection 15mm size PTMT nuts of length 450 mm complete all as specified and directed.

Supply and fixing in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 202 or Equivalent of Jaquar/ Prayag, sample as approved by GE.

Supply and fixing in repair 15 mm bore fancy type 2-way bib taps long body cast copper alloy, chromium plated screwed down, screwed for iron pipe or for brass ferrule with wall flange complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 203 or Equivalent of Jaquar/ Prayag., sample as approved by GE.

Supply and fixing in repair for 15 mm bore fancy type wall mixer with 115 mm long bend pipe for connection to overhead shower (with bush and piston Divertor fittings) with aerator complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 216 or Equivalent of Jaquar / Prayag, sample as approved by GE.

Supply and fixing in repair for fancy type 15 mm bore central hole basin mixture with 'U' shaped round casted spout with 3" long pipe connection with aerator complete all as specified and directed. Make : Jaquar Cat Part No CON-169KNB or Equivalent of Prayag / Cera, sample as approved by GE.

Supply and fixing in repair 15 mm bore, brass chromium plated, fancy type health faucet with SS connection pipe 1 m long complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 232D or Equivalent of Jaquar/ Prayag / Cera, sample as approved by GE.

Supply and fixing in repair fancy type CP Towel Rail 61 cm long complete all as specified and directed. Make : ESS ESS CROMA Cat Part No C 412 or equivalent of Jaquar/ Prayag / Cera, sample as approved by GE.

Supply and fixing in repair CP Towel Ring complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 502 or Equivalent of Jaquar/ Prayag / Cera, sample as approved by GE.

Supply and fixing in repair CP soap dish complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 414 or Equivalent of Jaquar/ Prayag / Cera, sample as approved by GE.

Supply and fixing in repair CP toilet paper holder complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No AC 206 or Equivalent of Jaquar/ Prayag / Cera, sample as approved by GE.

Supply and fixing in repairs CP Towel Bracket, (61 cm long) complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 423 or Equivalent of Jaquar/ Prayag / Cera, sample as approved by GE.

Supply and fixing sheet glass, corner shelf assembly, consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing, 60 cm long complete all as specified and directed.

Supply and fixing 15 mm bore overhead shower single flow (ABS body chromium plated with grey face plate) with rubit cleaning system including shower arm 240 mm long (light weight) round shape with wall flange complete all as specified & directed. Make:- ESS ESS CROMA Cat Part No. T 134 or Equivalent of Jaquar / Prayag / Cera, sample as approved by GE.

Supply and fixing in repair SS grating round 125/110 mm size of anti- cockroach, anticlog, anti foul etc. complete all as specified and directed.

Supply and fixing in repair 15 mm bore piller taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 201 or Equivalent of Jaquar / Prayag / Cera, sample as approved by GE.

Supply and fixing in repair water closet seat cover, any colour, pattern with flat bottom and mild steel chromium plated or aluminium hinging devices complete all as specified and directed. Make : Cat Part No S1020101 of Cera or Equivalent in Hindware / Prayag , sample as approved by GE.

Supply and fixing in repair sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm complete all as specified and directed. Make : Nirali / Prayag / Hindware / Cera, sample as approved by GE.

Supply and fixing in repair Kitchen sink without drainage board, made of stainless steel 1 mm thick, with plugs, washers and waste pipe & coupling including bedding in cement morter to dwarft wall or including fixing GI cantilever brackets as per site requirement and connecting with suitable size of pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 178mm complete all as specified and directed. Make : Nirali / Prayag / Hindware / Cera, sample as approved by GE.

Supply and fixing in repair 75 mm dia PVC(SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15 cm thick (below or above GL) unreinforced, and removing debries out side MoD land complete all as specified and directed.

Material and labour for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling, mass concrete and sunken floor treatments complete all as specified and directed.

Material and labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ of 1.2 Kg/Sqm including cleaning of surfaces in sunken floor treatment complete all as directed.

Material and labour for rendering 10 mm thick in CM (1:4) on fair faces of brickwork or concrete surfaces, with using liquid water proofing compound @ 200 ml per 50 kg bag of cement or as per manufracture's instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC shall be measured and paid for seperately under relevant item as supply only.

Supply only liquid water proofing compound complete all as specified and directed. Make : Pidilite / Sika / Fosroc, sample as approved by GE.

Supply and fixing in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed. Make : Cat Part No S3010104 of Cera or Equivalent in Hindware / Prayag, sample as approved by GE.

Material and labour for 5 mm thick cement plaster in CM (1:3) on ceiling surfaces and finish the surface fair and even without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 2mm thick (average) Birla wall putty complete all as specified and directed. Make : Asian paint (Royale Luxury Emulsion Brand) / or equivalent in Berger paint / Nerolac / Shalimar as approved by GE.

Material and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 2mm thick (average) Birla wall putty complete all as specified and directed. Make : Asian paint (Royale Luxury Emulsion Brand) / or equivalent in Berger paint / Nerolac / Shalimar as approved by GE.

Supply and fixing in repair 2.00 mm thick PVC tile/sheet laminated, plain coloured, marbled mosaic or mottled finish of any colour laid with approved rubber based adhesive in floors including preperation of floor surface complete all as specified and directed. Make : Royal House / Premier Poly Film Ltd, sample as approved by GE.

PRABHU ASSOCIATES

SAI SIDDHI CONSTRUCTION

NATH CONSTRUCTION

Bidder Name

NATH CONSTRUCTION

D.S. Construction

PRABHU ASSOCIATES

SAI SIDDHI CONSTRUCTION