Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹12.7 LAccepted-AOC 189 ANAND VIHAR SAPROON DISTT SOLAN H P | SAPROON | SOLAN | HIMACHAL PRADESH | ₹12.7 L Quoted ₹13.1 L | L-1 | Accepted-AOC Accepted |
| 2 | L-2₹14.3 L+₹1.2 L (9.51%)Rejected-AOC | ₹14.3 L+₹1.2 L (9.51%) | L-2 | Rejected-AOC Accepted |
| 3 | Rejected-Technical VILLAGE P O BARIN MANDIR TEHSIL TOUNI DEVI DISTT HAMIRPUR H P | - | - | Rejected-Technical Not Qualify |
| 4 | Rejected-Technical | - | - | Rejected-Technical Not Qualify |
Tender Value
₹8.7 L
EMD Value
₹17,300
Closing Date
22 Jul 2019, 11:00 amClosed
Executive Engineer
HPTDC Ritz Annexe Shimla
Construction of Parking and TRC at Kasauli, Distt. Solan HP. Sub Sub Head Improvement of Parking and Tourist Facility at The Rose Common Kasauli,
2019_HPTDC_30044_1
Proj/RandM/7/12/16/III
Open Tender
Civil Works - Water Works
Item Rate
120 days
Kasauli District Solan HP.
Please refer Tender documents.
5 documents required · 5 mandatory
₹1,200
MD HPTDC
₹17,300
17 Feb 2021
8 Jul 2019
22 Jul 2019
8 Jul 2019
22 Jul 2019
8 Jul 2019
8 Jul 2019 - 21 Jul 2019
Amount
Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies for all height of propping and centering below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work including carriage of materials in all leads and lifts. a) Flat surfaces such as soffits and suspended floor, roofs landing and like plain upto 200 mm in thickness.
Providing & Laying cement concrete 1 : 2 : 4 ( 1 Cement : 2 Sand : 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in Foundation and plinth including carriage of material within all leads and lifts.
Providing and laying cement concrete 1:6:12 (1cement:6sand:12graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinths including carriage of materials in all leads and lifts.
Providing & Laying cement concrete 1 : 5 : 10 ( 1 Cement : 5 Sand : 10 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in Foundation and plinth including carriage of material within all leads and lifts.
Providing mild steel/tor steel reinforcement for RCC work including bending, binding also cost of binding wire and placing in position complete upto all floor level including carriage of materials in all lead and lifts. a) Tor steel
Half brick masonry in common burnt clay building bricks 2nd class in superstructure in cement mortar 1:4 (1cement:4sand) including carriage of materials in all leads, lifts and upto all heights.
Providing wood work in frames of doors, windows and other frames wrought framed and fixed in position in 2nd class deodar wood including carriage of materials in all lead, lifts and upto all heights.
Providing and fixing 40x3 mm flat iron hold fast 40 Cm. long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm 1:3:6 (1cement:3sand:6graded stone aggregate of 20 mm nominal size including carriage of materials in all lead, lift and height.
Providing wood work in trusses, purlins, rafter, posts, post plates, wall plates and the like wrought framed, hoisted and fixed in position. 2nd class Deodar wood including carriage of materials in all lead, lift and height.
Providing wood work in frames of false ceiling, partitions etc. sawn and put in position including carriage of materials in all leads and lifts and heights. a) 1st class sal wood.
Providing and fixing plain particle board ceiling of approved quality with butt jointing and nails upto all heights(frame work cover fillets to be paid for separately) including carriage of materials within all leads and lifts. a) 6 mm thick cement bonded particle board.
Providing and fixing plain square edged cover fillets (moulding) 40mm x 12 mm section of 1st class Kail wood with wood enscrews in doors and windows chowkhat to cover the joint including carriage of materials in all lead, lifts ad height.
Providing and fixing panelled glazed or paneled and glazed shutters for doors windows and clerestory windows including black enameled iron butt hinges with necessary screws including carriage of materials in all leads, lifts and upto all height . a) 40 mm thick, Ist class deodar wood.
Providing and fixing bright finished brass handle of approved make and design with screws etc. complete including carriage of materials in all leads and lifts. Paragon flora make. a) 100 mm
Providing and fixing finished brass tower bolts (barrel type) with nuts and screws etc. complete including carriage of materials in all leads and lifts Paragon/Flora make a) 250 mm x 10 mm
Providing and fixing coloured glazed tiles of 6 to 8 mm thickness in skirting, risers of steps and dado laid over 12 mm thick cement mortar 1:3 (1cement:3sand) and jointed with cement slurry including carriage of materials in all lead and lifts and heights, Nitco/ Kajaria/ Rak make of minimum size 300x450 mm (basic rate not less than Rs.55/- per Sqft.
Providing and fixing coloured ceramic tiles 8 to 10 mm thickness in flooring of minimum size of 300x300 mm laid on a bed of 12 mm thick cement mortar 1:3 jointing with cement mixed with pigment to match the shade of tiles including carriage of materials in all leads and lifts and heights of Nitco, Rak/ Kajaria basic rate not less than Rs.65/- Per Sq.ft.
Providing and laying heavy duty precast cement concrete inter locking block vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub base of concrete with 25 mm thik average thinkness of cement morter 1:4 (1cement: 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete. 40mm thick interlocking blocks NTC make.
Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coated including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Charges. (Tata/Century wells make) including carriage of materials in all lead, lift and height.
Providing and fixing 2 mm thick B.P. sheet in facia etc. welded with M.S. steel frame (M.S. steel frame to be measured and paid for separately) including cutting and applying a coat of red lead primer and carriage of materials in all leads, lifts and heights.
Steel work welded in built up section, trusses and framed work, including cutting, hoisting, fixing in position and applying a coat of red lead paint including carriage of materials in all lead lifts and height in trusses ans trussed purlines in buildings.
Applying priming coat on new concrete/masonry / asbestos cement plastered surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand, papering and knotting including carriage of materials in all lead and lifts.:
Providing and applying wall putty (Birla or equivalent) over plaster surface after throughly brushing the surface free from morter drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials in all lead, lift and height.
Painting two coats of standard make and quality (excluding priming coat) on new steel and other metal surface with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. a) Other than white enamel paint.
Finishing wall with weather proof exterior grade emulsion of Asian/Apex or Nerolac make and colour on undecorated wall surface two or more coats to give an even shade and final finish after thoroughly cleaning of the surface of all dust dirt droppings and other foreign matter.( applying birla putty to be paid separately) including carriage of materials in all lead, lifts and height
Applying two coats over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting including carriage of materials in all lead, lifts and height.
Painting two coats of standard make and quality (excluding priming coat) on new wood and wood based surfaces, with enamel paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping. a) With enamel paint other then white. including carriage of materials in all lead, lifts and height.
Painting one coats (excluding priming coat) on previously painted wood and wood surface with enamel paint to give and even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping. a) With enamel paint other then white. including carriage of materials in all lead, lifts and height.
Extra over every subsequent coat of paint including carriage of materials in all lead, lifts and height.
20 mm cement plaster in single coat on fair side/ rough side of brick/concrete/stone wall for interior plastering in all floor level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 (1cement:4sand) including carriage of materials in all leads and lifts and heights.
Distempering ( two coats) with oil bound washable distemper of approved brand and manufacture and required shade on undecorated wall surface to give an even shade over and including a peiming coat with distemper primer of approved brand and manufecture after thoroughly brushing the surface free from morter dropings and other foreign matter and also including preparing the surface even and sand papers smooth primin coatwith distemper primer including carriage of materials in all lead and lifts..
Demolition below ground level upto all depth and disposal of unserviable material with in all lead through manually and mechanically means as directed by Engineer-in-Charge upto approved dumping site including carriage of materials in all lead and lifts..
Demolition of stone masonry above ground level upto floor two level including stacking of servicable materials within all lead and stacking properly manners and disposal of unservicable materials with in all lead through manually and mechanically means as directed by Engineer-in-Charge upto approved dumping site including carriage of materials in all lead and lifts..
Demolition of brick masonry above ground level upto floor two level including stacking of servicable materials within all lead and stacking properly manners and disposal of unservicable materials with in all lead through manually and mechanically means as directed by Engineer-in-Charge upto approved dumping site including carriage of materials in all lead and lifts..
dismentling wooden boardings in lining of walls and partitions, celing including frame work and stacking the service material within all lead and stacking properly manners and disposal of unservicable materials with in all lead through manually and mechanically means as directed by Engineer-in-Charge upto approved dumping site including carriage of materials in all lead and lifts. a) upto 10mm thickness.
Dismentling roofing including ridges, hips, valleys, gutters etc stacking the service material within all lead and stacking properly manners and disposal of unservicable materials with in all lead through manually and mechanically means as directed by Engineer-in-Charge upto approved dumping site including carriage of materials in all lead and lifts. a) G.I. sheet roofing.
Dismentling plaster of upto floor two level including stacking of serviceable materials within all lead and disposal of unservicable materials with in all lead through manually and mechanically means as directed by Engineer-in-Charge upto approved dumping site including carriage of materials in all lead and lifts. a) for thickness of upto 25mm.
Water supply and sanitary installation.Providing and fixing to wall ceiling and floor galvanized mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor and carriage of materials in all lead and lifts. Jindal make/Tata make. a) 15 mm dia
b) 20mm dia.
Providing and fixing PVC pipe Fenolex make ventilating pipes jointed with standred quality adhesive complete including carriage of materials in all lead and lifts. a) 75 mm nominal size
a) 110 mm nominal size
Providing and fixing PVC Fenolex make fiting and accessories of standred quality fixed with approved adhesive complete including carriage of materials in all lead and lifts. a) Door bend i) 75 mm nominal size
ii) 110 mm nominal size
b) Plain bends i) 75 mm nominal size
ii) 110 mm nominal size
c) Collar i) 75 mm nominal size
ii) 110 mm nominal size
Providing and fixing vitreous china white colour water closet cera make Cat No. S1021106, S1060102, B 1510108, B 1810103 or equivelent make Hind were/Jaguar make with integral "P or "S" trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement:1sand) complete including carriage of materials in all lead and lifts.
Providing and fixing vitreous china wash basin with single hole for pillar tap with pedestal complete cera make Cat No. S2040103, S2090101or equivelent make Hind were/Jaguar make with nut bolt including carriage of materials in all lead and lifts.
Providing and fixing PVC floor trap Finolex make of self cleaning design with granting without bent arm including cost of cutting and making good the walls and floor including carriage of materials in all lead and lifts.a) 75 mm nominal dia
Providing and fixing C.P. brass bottle trap 32 mm dia for wash basin and sink Jal make Cat No. 1861 or equivelant Cera/Jaguar make including carriage of materials in all lead and lifts.
Providing and fixing C.P. bib tap Jal make Cat No. 17360 or equivelant Cera/Jaguar make including carriage of materials in all lead and lifts.
Providing and fixing C.P. brass soap dish Jal make Cat No. 22540 or equivelant Cera/Jaguar make including carriage of materials in all lead and lifts.
Providing and fixing C.P. grating 100 mm dia nominal size Chily make for floor trap including carriage of materials in all lead and lifts.
Providing and fixing 1200 mm x 900 (Ornamental type) superior glass, 4 mm with C.P. brass screws and washers including carriage of materials in all lead and lifts. (Modi or sant gobian make with ornamental wood frame).
Providing and fixing C.P. towel rail Jal make Cat No. 26522 or equivelant Cera/Jaguar make fixed with wooden plugs with C.P. brass screw including carriage of materials in all lead and lifts.
Providing and fixing C.P. single basin mixed Jal make Cat No. 15474 or equivelant Cera/Jaguar make including carriage of materials in all lead and lifts.
Providing and fixing wall mixer faucet with over head shower and bath head pipe Jal make Cat No. 17770 or equivelant Cera/Jaguar make including carriage of materials in all lead and lifts.
Providing and fixing angle valve 15 mm dia Jal make Cat No. 17480 or equivelant Cera/Jaguar make including carriage of materials in all lead and lifts.
Providing and fixing C.P. connection pipe with brass unions 15 mm nominal bore heavy duty including carriage of materials in all lead and lifts.
Providing and fixing C.P. toilet paper holder Jal make Cat No. 22546 or equivelant Cera/Jaguar make including carriage of materials in all lead and lifts.
Providing and fixing brass full way valve with wheels including carriage (ISI make) heavy duty including carriage of materials in all lead and lifts a) 15mm nominal bore
b) 20mm nominal bore
Providing and fixing C.P. brass Robe hook Jal make Cat No. 22560 or equivelant Cera/Jaguar make fixed with necessary screws including carriage of materials in all lead and lifts
Providing and fixing C.P. brass towel ring Jal make Cat No. 74524-71 or equivelant Cera/Jaguar make including carriage of materials in all lead and lifts.
Providing and fixing C.P. waste coupling Jal make Cat No. 1051 or equivelant Cera/Jaguar make including carriage of materials in all lead and lifts.
Providing and fixing C.P. brass jet Jal make Cat No. 9424 or equivelant Cera/Jaguar make fixed with necessary screws including carriage of materials in all lead and lifts
Providing and fixing kitchen stainless steel having size 450x400x230mm of johnson / Nirali or equivilant make fixed on M.S. brackets painted white including cutting holes in walls and making good the same including carriage of materials in all lead and lifts
Nitin Bhasin
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .