Construction of Shed at Sundrashi for Government Facilities such as control room Medical service camp and rescue accommodation for Police and other Government personal duties etc. (SH Construction of toilet with septic tank at Sundrashi

Amount

Excavation in foundation trenches etc.drains and channels etc; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseling or any other mixed variety of soil, including shoring, shuttering, de-watering and pumping out water upto any depth or any quontam of water including slush which may be arise during the de-watering removal of slush and stacking the serviceable and un-serviceable material clear from edge of excavation as per direction of Engineer-In-Charge and then returning the stacked soil in 15cm (fifteen centimeter) layer when required into plinths sides of foundations etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- In charge, within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rates inclusive of octori, royality, Malkhana, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings as per Architectural drawing and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone aggregate 20mm (twenty millimetre) nominal size) at plinth level in Cement Mortar 1:6 (one cement isto six sand) within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying upto first floor two level reinforced cement concrete 1:2:4 (One cement is to two Sand is to four graded stone aggregate 20mm( Twenty millimeter ) nominal size) for column post to give a smooth and even surface including centring and shuttering all plinth work including complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government.

Providing Tor steel reinforcement of Sail / Tisco for reinforced cement concrete work including bending, binding, straighting, cutting and placing in position complete including cost of binding wires complete for all floors within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 40 mm (forty millimetre) thick cement concrete flooring 1:2:4 (one cement isto two sand isto four graded stone aggregate 20 mm (twenty millimetre) nominal size) laid in one layer finished with a floating coat of neat cement as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Structural steel work of TATA/ SAIL riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat ofapproved steel primer all complete, within all leads, lifts of material and other incidentals, as per approved drawing, design and as directed by Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero milimetres) thick prepainted steel sheet ISI marked - Z 120 of tata / sail / reliance / jindal in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six milimetres) diametres with prepainted limpet and rubber washers complete with all accessories as required within all leads, lifts of materials and other incidentals, as per approved architectural drawing, design and specification and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm fifteen millimetre polythelene aluminum polythelene (PE- AL-PE) composite pressure pipe U.V. stabilized with carbon block confirming to I.S. 1545-2004 of Kitec or its equivalent for water supply including clamps at appropriate spacing, cutting fixing and making good the walls etcetera; but excluding the cost of fittings (Internal work), including filling the joints with approved adhesive complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millimetres) diametre on PVC pipe for sewerage including with joint approved adhesive mixure ISI marked of Finolex / Supreme / Prince including filling the joints with approved adhesive complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diametre nominal bore chromium plated ISI markedPVC bib tap of jal within all leads, lifts of materials and other incidentals and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing stainless steel wash down water closet (Indian type ) flush bend, 20mm (Twenty millimetres) over flow pipe, with seat & lid fixed with and integral P or S trap including jointing the trap and soil pipe with of approved brand, complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres P.V.C. Collar ISI marked including fixing with approved adhesive complete, including carriage of material, within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) Nominal bore/diameters PVC Finolex/Relpipe(Reliance)/Vectus single equal branch with oval access door, insertion rubber washer 3mm (Three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetera complete in all floor level/height including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkhana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150x5mm (one hundred fifty milimetres into Five milimetres) size Pilot/sheel anodized aluminium sliding door bolts anodized or dyed to required colour and shade with necessary screws etcetra within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing aluminium Pilot/sheel anodized transparent or dyed to required colour and shade and of approved make with necessary screws etcetra handles with the necessary screws etcetra complete. within all leads, lifts of materials and other incidentals, as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (one hunded fifty millimetre) diametre oxidized M.S. double acting spring hinges oxidized transparent or dyed to required colour and shade with necessary screws within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Dilwar Ram (BID ID -533677)