Urgent miscellaneous Civil maintenance work in GMTD office Gorakhpur BA.

Amount

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378)

12 mm cement plaster of mix :

1:6 (1 cement: 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix :

1:6 (1 cement: 6 coarse sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:6 (1 cement: 6 fine sand).

Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade.

Old work (one or more coats)

Old work (Two or more coats)

White washing with lime to give an even shade :

Old work (two or more coats) .

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge.

With cement mortar 1:4 (1cement: 4 coarse sand).

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm).

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness.

Providing unskilled labour for day to day maintenance purpose.

Refixing Aluminium partition with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. including fixing with glazing and particle board the same at the new location as decided by Engineer -in-charge complete in all respect .( Cost of EPDM rubber/neoprene gasket and snap beading shall be paid seperately etc shall be paid seperately)

Rubbin of old marble chips flooring, rubbed and polished to granolithic finish, all complete as per direction of Engineer-in-charge.

Cleaning of all spots and scaling on Ceramic Wall tiles provided in toilet and other places in buildings with the help of Tile cleaner liquid ( Harpic, light acid recommended for tiles or any other liquid) , scrubber, steel Patti , cloth etc. all complete as per direction of the Engineer-in-charge. It includes the cost of all labour T&P etc. all complete.

Proper and efficient cleaning of Aluminium Partition including panelling of Glass or Prelaminated Board etc. (both side but measere one side for payment) using approved cleaning agent as Thinner, Colin or any other solution recommended for Powder coated Aluminium, for glass and for Prelaminated board etc. all complete as per the direction of the Engineer-in-charge. It includes the cost of all labour T&P etc. all complete.

Cartage of welding machine from shop to site and sending back from site to shop including hire charges all complete as per directions of the Engr. In charge.

Welding of brocken M S items such grills, door & window frames and pivots etc complete as per direction of Engineer in charge

M/S Shital Prasad Mall (BID ID -905958)