REPAIR MAINTENANCE TO DRAINAGE COMPOUND WALL FENCING HARDSTANDING AT MARRIED AND OTM ACCN AND CERTAIN INTERNAL EM WORKS UNDER GE I GOS

Amount

Demolition of RCC of any description and in any position not other wise specially provided for reinforcement cut as required to facilitate demolition complete all as specified and directed.

M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in cover slabs (for manholes etc) and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

M&L for Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for finishing cement concrete even and smooth using extra cement complete all as specified and directed.

M&L for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed.

Demolition of Cement Concrete (unreinforced) of any description & in any position not otherwise specifically provided for. Complete all as specified & directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for PCC 1:3:6 Type C-2 using 40 mm graded stone aggregate in Surface channels and drains etc complete all as specified and directed.

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface, finishing even and smooth without using extra cement complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for add or deduct for each 25mm girth or part thereof over or under 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed

M&L for Removing excavated material (Soil) exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement & pigment complete all as specified & directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed.

M&L for hard core of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 40 to 100 mm thick cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in path/ hard standing surface finished even and fair complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in sub base,floor , plinth protection etc and finishing cement concrete even and fair specified and directed by Engr - in - Charge.

M&L Excavating over areas, n exc 1.5 m deep and getting out in soft/ loose soil complete all as specified and directed.

M&L for providing Glass strip of 6 mm thick and 40 mm deep in hardstanding for making panels complete all as specified and directed.

M&L for 10 mm thick heavy duty exterior designer tiles of size 300 mm x 300 mm as in floor set, jointed in neat cement slurry and pointed with grey cement and pigment complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

S&F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified and as directed

S&F pre- painted galvalume aluminum zinc corrugated steel based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping serews as specified and directed by Engr - in - Charge.

Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings including ridges complete all as specified and directed.

M&L for Fe 410-W (Gde E-250 quality A) Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for Fe 410-W (Gde E-250 quality A) Framed work as in doors or gates of angle or other section with gusset plates,rails,braces etc complete,drilled for fixing of steel sheeting or other covering. Doors,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening anf fixing complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M&L for two coats synthetic enamelled paint to new steel surfaces after preparation over a coat of red oxide primer area over exc 10cm in width or girth etc all as specified and directed by Engr - in - Charge.

M&L preparation of new steel surfaces of any description n exc 10cm in width or girth and priming with red oxide zinc chrome and applying two coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge

Dismantling posts or sturts (wood,steel or RCC) any section incl taking out embedded portion and making good disturbed ground etc all as specified and directed.

Dismantling fencing wire mesh any type etc all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out making good the disturbed surface if required in soft/ loose soil complete all as specified and directed.

M&L for PCC 1:3:6 Type C-2 using 40 mm graded stone aggregate in foundation filling and mass concrete all as specified and directed.

S&F Angle iron posts and rails,drilled and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for secruing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165.

Mild screw bolts (Machine made) with hexagonal or square head at one ends and to fitted with washers and one hexagonal or square n.exc 15cm long, dia of neck 11 to 15mm all as specified and directed by Engr-in-Charge.

S&F PVC coated chain link of 3.16mm dia mild steel galvanised fencing of mesh size 75 mmx 75mm as per IS : 2721-2003 weight n exc 4.00 kg per sqm complete all as specified and directed by Engr - in - Charge.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe-410-W (Gde E-250) quality-A or Fe-290 (Gde-E-165) complete all as specified & directed.

M&L for Cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 250 ltr n.exc 500 ltr capacity incl washing of water tank with the use of Tank cleaning motor jet pressure machine and using bleaching powder @ 0.25 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt, etc, from RCC/PVC tanks exc 500 ltr n.exc 1000 ltr capacity incl washing of water tank with the use of Tank cleaning motor jet pressure machine and using with bleaching powder @ 0.50 Kgs per tank with writing the date of cleaning with any type of paint and from mouths of circulating pipes, including Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

S&F in repairs ball valves for 20 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs ball valves for 25 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.

S&F in repairs Galavinised 2 strand steel barbed wire 2.24 mm dia barbed wire with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing tying at crossing with and provision of galavanised mild steel wire staples pins etc as directed (each line wire to be measured) all as specified and directed.

Taking down cement plaster on brick or concrete surface including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint in concrete surface complete all as specified and directed.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high etc complete all as specified and as directed by Engineer-in-Charge. (Note : Rates to be deemed fit for all security measures while working in heights more than 6m from GL).

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing without andulations complete all as specified and directed

Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed

Material and labour for one light point controlled by one 10amps switch and point wiring complete with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990(as amended) unsheathed, multistranded, single core, copper conductor cable 1100 volts grade using approved colour coding drawn through and including PVC concealed conduit 20/25 mm dia medium grade (MMS) and incliding all accessories such as bend,tee,elbows,reducers,bell mouth tube ends,short pieces & junction boxes with PVC covers etc in walls / roofs / floors / ceiling etc and including flush mounting modular GI sunken boxes having top,bottom,side/back side knockout for conduit entry from any direction made out of 1.60mm thick, 60mm deep for housing modular switches,sockets,fan regulators, Indicators,blank plate etc and incl modular white cover plate with inner frame suitable as per switch modules and including PVC insulated multistranded copper conductor 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth dolly for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed for the following:- Make for item No 2 to 4 :- (1).PVC Copper conductor cable FRLSH type :-Finolex / Havells / RR Kabel / Polycab. (2) PVC conduit (MMS) & Accessories ISI Marked :-Presto Plast/Finolex/Kalinga Gold/Plaza/AKG Plastics Pvt Ltd (Note:- All necessary accessories such as modular box,top cover plate, blank plate,MS box,screws,washers and all modular electrical fixtures are used same make/brand only and including cutting & chasing work at any height it shall be deemed in to included in quoted rate only.)

All as per Item Ser No 59 above, but for one fan point controlled by one switch 10 amps, and one regulator.

All as per Item Ser No 59 above, but for one exhaust fan point controlled by one 10 amps switch .

All as per Item Ser No 59 above, but for one 5 pin 6 amps socket point controlled by one 10 amps switch on independent board .

All as per Item Ser No 59 above, but for one 5 pin 6 amps socket point controlled by one 10 amps switch on same board .

All as per Item Ser No 59 above, but for one bell/buzzer point controlled by one bell push.

All as per Item Ser No 59 above, but for one light point controlled by two 2 way switches/bed switch point

All as per item No.62 & 63 above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm and for one 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on independent board.complete all as specified and directed.

All as per Item Ser No 66 above, but for One 6 pin 16/6 amps socket outlet point controlled by one 16/20 amps switch on same board.

All as per item No.66 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed.

Supply & fixing modular type full flat with indicator switches, 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed. ( Make :- Crabtree code No.ACMSPIW101(Murano) magic indicator switch or equivalent in Legrand / Schneider)

Supply & fixing modular type full flat with indicator switches, 10 Amps, single pole,2 way,1 module,240V,AC, ISI Marked complete all as specified and directed. ( Make :- Crabtree code No.ACMSPXW102 (Murano) or equivalent in Legrand / Schneider)

Supply & fixing modular type bell push 10 Amps,1 module, single pole, 240 volts,AC, with embosing bell simble & indicator, ISI Marked complete all as specified and directed. ( Make :- Crabtree code No.ACMSPIW101 (Murano) or equivalent in Legrand / Schneider)

Supply & fixing modular type full flat with indicator switches, 16/20 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed. ( Make :- Crabtree code No.ACMSPIW161 (Murano) magic indicator switch or equivalent in Legrand / Schneider)

Supply & fixing modular type socket with shuttered type 6/10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.( Make :- Crabtree code No.ACUKXXW063 (Murano) or equivalent in Legrand / Schneider)

Supply & fixing modular type socket with shuttered type 16/20 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed.( Make :- Crabtree code No.ACUKCXW253 (Murano) or equivalent in Legrand / Schneider)

Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 0 to 8 steps, ISI Marked complete all as specified and directed.( Make :- Crabtree code No.ACURFHB008 (Murano) or equivalent in Legrand / Schneider)

Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed.( Make :- Crabtree code No.ACUIIIW060 (Murano) or equivalent in Legrand / Schneider)

Supply and fix call bell AC, 230 Volts single pole, multi music type best and superior quality, ISI marked, as approved type complete all as specified and directed.( Make :- Crabtree code No.ACMCEEW000 or equivalent in Legrand / Schneider)

Supply & fixing angle lamp holder, insulated body with back plate for batten fittings,ISI Marked latest model complete all as specified and directed.Make:- Crabtree or equivalent in Legrans/Anchor/Havells

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI Marked latest model complete all as specified and directed.Make:- Crabtree or equivalent in Legrans/Anchor/Havells

Supply & fix / in repairs 20 watt LED light fitting pride essential bright linea white lighting, high quality materials and slim intergrated design,extruded aluminium housing enhances safety, PC diffuser, reliable and robust housing structure ,maximize the endurance over the life time, easy to install, efficency 100 lm/w and including providing coloured end caps, pre-wired, and PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. Make :- Havells ordering code.LHEXAWP7IN1W020 or equivalent make in Crompton/Philips

Supply and fixing/in repairs LED 20 watt,6500K, Pride plus inverter batten,decorative type light fitting white lighting, with square profile and polycarbonate channel,lithium lon battery with charging time 8 hours to 10 hours and back up time upto 4 hours high quality materials and design,extruded aluminium housing enhances safety,high quality PC diffuser, easy to install, efficency 125 lm/w and including providing pre-wired, and PVC/Wooden round or square blocks -02 Nos and connected with LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed. Make :-Havells Cat No. LHEXACP7FN1W020 or equivalent make in Crompton/Philips

Supply and fixing /inrepairs 20 watt LED batten nicolaus glamtube integrated design, easy to install,efficency,125 lm/w,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.Make :- Havells ordering code.LHEWAJPGPV1B020 or equivalent make in Crompton/Philips

Supply and fixing/in repairs 36 watts LED supernova light fitting high wattage complete LED lighting with high lumen output,environmental friendly,energy efficient, integrated design, easy to install,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.Make :- Havells ordering code.LHEWAJPGPV1C036 or equivalent make in Crompton/Philips

Supply and fixing/in repairs 20 watts LED Austra mirror smart light fitting one/two feet long,contemporary design of mirror light complete decorative LED lighting with extruded polycarbonate, environmental friendly, energy efficient, easy to install,PC diffuser, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.Make :-Havells Cat No. LHEXACP7FN1W020 or equivalent make in Crompton/Philips

Supply and fixing/in repairs LED batten complete slim fitting 10 watts integrated design, easy to install,PC diffuser and robust housing, high quality materials,pre-wired including providing PVC round/PVC square blocks-02 Nos and connected with LED fitting to ceiling rose and removing old unserviceable fitting complete all as specified and directed.

Supply and fixing/in repairs decorative LED 9 watt decorative, globe type,high quality ploycarbonate materials suitable for 9 watt warm LED lamp ,B22,220 Volts AC with high efficiency, soft glare free light complete with LED lamp,holder suitable for wall surface and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed. Make :-Havells Cat No. LHFOGBE1TZ1W035 or equivalent make in Crompton/Philips

S & F Energy efficient and energy saving new generation 10 watts LED bulk head light fitting IP-65 luminaire with opel diffuser pre-wired of luminaires including LED light driver and connected with LED fitting to ceiling rose terminal and incl removing old unserviceable fitting complete all as specified and directed.Make:- Havells cat No.HEXAFT10WLED857SSYMBOPC or equivalent in Crompton/Philips any approved make

Supply and fixed/ in repairs LED bldg secruity light fitting of capacity 45 Watt LED street light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5 KV inbuilt surge protector and cable connection from ceiling rose/looping box/switch board/DBs to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Havells cat No.LHETACU7PA7J045 OR equivalent make in Crompton / Philips as approved

Supply and fix GI bracket pipe of size 32 to 40 mm dia as suitable medium grade of 1.2 mtr long bent to shape suitable degree of bending as per site requirement with hot or cold bending method of process for making the one end of GI pipe bracket suitable for fixing of any type street light fitting and shall be fixed on wall surfaces and including providing suitable fabricate galvanised flat iron clamps of 30X6 mm thick -02 Nos suitable for fixing at any place/height with hole fastners,nuts,bolts & washers including grouting on wall etc and including removing of old unserviceable item complete all as specified and directed.Make of GI pipe- Jindal/Tata/Bansal

Supply and fixed energy saving,environmental friendly,long life asethetic consistancy in multi purpose application with SMD LEDs as light source with driver included,suitable for highlighting architural features or area lighting, light fitting of capacity 60-70 Watt LED, light fitting in aluminium PDC housing, toughened glass cover with IP65 protection with 4/5/10 KV inbuilt surge protector and cable connection from looping box to light fitting and testing and including removing of old unserviceable item complete all as specified and directed.Make:- Havells cat No.JETAQUANTOPLUSFLP60WLED757SYMLENS or equivalent in Crompton/Philips any approved make

Supply & fixing and sheet metal enclosure with acrylic door type, double door ,415 volts AC,VTPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.Make:-Legrand Cat No.5077 50 4 way or equivalent in Hagar/Schneider.Note for item No.22 to 32- MCCB/MCB DBs and MCBs/MCCBs both are used same make only

Supply & fixing and sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 12 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. Make:-Legrand Cat No.5076 22 12 way or equivalent make in ABB/Havells.

Supply & fixing in repairs sheet metal enclosure, with acrylic door type, double door, 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar links and MCB incomer MCB SPN/DP and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs and making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. Make:-Legrand Cat No.5076 21 8 way or equivalent make in ABB/Havells

Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. Make:-Legrand Cat No.5076 20 4 way or equivalent in Hagar/Schneider

Supply and fix mini MCB,32 A,DP 'C and motor starter including with suitable sunken box in concealed/surface and internally connected properly suitable for cooking electrical appliances including protection and including removing old unserviceable items and making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. ( Make :- 32A C DP Mini MCB Crabtree code No.DCVNCDPA032,32A Motor starter Crabtree code No. ACVSMXW321or equivalent in Legrand / Schneider)

Supply & fix / inrepairs MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply & fix / inrepairs and MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make

Supply & fix / inrepairs and MCB SPN 40 to 63 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make Note for item No.30 to 40- MCCB/MCB DBs and MCBs/MCCBs are used same make only

Supply & fix / inrepairs and MCB TPN 63 to 100 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make Note for item No.30 to 40- MCCB/MCB DBs and MCBs/MCCBs are used same make only

M & L for sub main wiring complete in repairs with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn drawn through and including PVC conduit in concealed ISI marked medium grade(MMS) accessories such as Tee,corner, overlaping connector etc and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC casing caping shall be measured as one unit.

M & L for sub main wiring complete in repairs with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit in concealed ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit.

M & L for sub main wiring complete with 2 run of 1.5 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 1.5 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed. Note : - Two run of 1.5 sqmm single core copper conductor cable and one run of 1.5 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. Make for item No 101 to 104 :- (1)PVC Copper cable :-Finolex/Havells/RR Kabel/Polycab. (2) PVC conduit(mms) & Accessories :-Presto Plast/Finolex/Kalinga Gold/Plaza

Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts,50Hz suitable for AC's/Geysers complete all as specified and directed.Make:- Legrand Cat No.5078 11,20A SP/ Hager/ Havells or as equivalent approved make

Supply and fix MCCB, 125 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item complete all as specified and as directed. Make:- Legrand/ABB/Schneider or equivalent

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody Supply only new ceiling fans complete with blades, down rods, and connected accessories, 230 V, 1200mm sweep. Min air delivery 225 CFM with service value 6.00 BEE,Star rated with brushless direct current motor complete all as specified and directed.Make:-Crompton Jura Prime or equivalent in Atomberg/Havells/ Orient as approved.

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic PVC body complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 250 mm and including providing insect protection PVC net frame , with louvers with frame incl writing MES No on exhaust fan with synthetic enamel paint complete all as specified and directedcomplete all as specified and directed.Make:-Havells Thrill Air DX white 250mm or equivalent in Orient/Kaithan as approved make

Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steel body AC single phase.230Volts of size 300 mm sweep with blades and frame with louvers complete all as specified and directed.Make:-Havells ventil Air DB SKU Code:-FHVVEMTDBB12 or equivalent in Orient/Kaithan as approved make

Taking down old unserviceable geyses of any capacity from work site at any height and deposit to MES store yard for safe custody and Supply and fix new electric water heater, storage type steel body/plastic body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve,thermostat, NRV, Hot water and Cold water heavy duty connection pipes-02 Nos,holefasterns-04 Nos and necessary accessories as per site requirement etc.complete all as specified and directed.Make:-Havells Fabia SP SKU Code:-GHWAFATWB025 whiteblue or equivalent in Orient/Kaithan as approved make

Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 metres deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron strip of size 32 X 6 mm from earth electrode to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate no 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including char coal, salt packed all around the earth electrode plate in layers,PCC earth pit chamber 1:3:6 type C1,RCC cover 1:2:4 type B1, including excavation,earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed.

S&F for PVC non-metalic rigid conduit incl boxes,junctions boxes 1 to 4 way & terminals but incl of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN,telephone and TV connections cablesincluding cutting,chasses and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed.

Cutting the existing surface wall of brick/stone masonary and making round hole at any height suitable for fixing 200 to 450 mm sweep exhaust fan including providing nut,bolt and washers after grouting in PCC and including 3 mm dia 5 cm apreature size GI jali and proper aluminium frame to avoid insect protection fix at inner surface of wall and making good the disturbed surface area complete all as specified and directed.

Taking down carefully existing electric meters of any type/capacity from work site and deposit to MES store yard/ Charge holder without damage for safe custody and supply and fixing smart electric meter single phase four wire energy meter as per BIS -16444 2015 (Reaffermid 2020), ISI marked in existing board /floor panel having current range 10-60 Amps,240 Volts, accuracy class 1.0 and including providing necessary items for functioning complete all as specified and directed.

Supply and fix inrepairs thermoplastic box of size 217 mm X 253 mm X115 mm(L X B X H)confirming to IP -65 with transparent lid hinged door, mounting plate,DIN rail with fastening screws and other necessary accessories complete and fixing on wall for housing KHW meterand including removing of old unserviceable item complete all as specified and directed Make:-Hensel, cat No.KG 9003 or equivalent any ISI Mark

Supply and fix copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ;2.5 sqmm and including electric connection through PVC conduit in concealed/casing caping in surface from ceiling fan to ceiling rose and including removing old unserviceable item complete all as specified and directed. Make:-Havells/Finolex/Polycab

Supply and fix modular white cover plate with frame 1 module suitable for GI flush box,ISI marked and suitable for site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed..( Make :- Crabtree code No.ACUPLCWV01 or equivalent in Legrand / Schneider)

Supply and fix modular white cover plate with frame 2 module suitable for GI flush box,ISI marked and suitable for site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.( Make :- Crabtree code No.ACUPLCWV02 or equivalent in Legrand / Schneider)

Supply and fix modular white cover plate with frame 3 module suitable for GI flush box,ISI marked and suitable for site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed..( Make :- Crabtree code No.ACUPLCWV03 or equivalent in Legrand / Schneider)

Supply and fix modular white cover plate with frame 4 module suitable for GI flush box,ISI marked and suitable for site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed..( Make :- Crabtree code No.ACUPLCWV04 or equivalent in Legrand / Schneider)

Supply and fix modular white cover plate with frame 6 module suitable for GI flush box,ISI marked and suitable for site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed..( Make :- Crabtree code No.ACUPLCWV06 or equivalent in Legrand / Schneider)

Supply and fix modular white cover plate with frame 8 module suitable for GI flush box,ISI marked and suitable for site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed..( Make :- Crabtree code No.ACUPLCWV08 or equivalent in Legrand / Schneider)

Supply and fix modular white cover plate with frame 12 module suitable for GI flush box,ISI marked and suitable for site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed..( Make :- Crabtree code No.ACUPLCWV12 or equivalent in Legrand / Schneider)

Supply and fix modular white cover plate with frame 18 module suitable for GI flush box,ISI marked and suitable for site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed..( Make :- Crabtree code No.ACUPLCWV18 or equivalent in Legrand / Schneider)

Supply and fixing in repairs metal flush box 1/2 module, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixing in repairs metal/PVC flush box 3 module ,ISI marked, and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixing in repairs metal/PVC flush box 4/5 module, ISI marked,and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixing in repairs metal/PVC flush box 6 module,1.60mm thikness ,ISI marked and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixing in repairsmetal/PVC flush box 8 module,1.60mm thikness ,ISI marked and suitable for existing type as per site requirement and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixing in repairs modular white cover plate with frame 1 module,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixing in repairs modular white cover plate with frame 2 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixing in repairs modular white cover plate with frame 3 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixing in repairs modular white cover plate with frame 4/5 module ,ISI marked as per site rqmnt and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixing in repairs modular white cover plate with frame 6 module incl ,ISI marked and suitable for existing type as per site requirement and screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixing in repairs modular white cover plate with frame 8 module ,ISI marked and suitable for existing type as per site requirement and incl screws,washears etc and including removing old unserviceable item from existing loaction complete all as specified and as directed.

Supply and fixing in repairs modular switch 1 way,10Amps,1module,240V, ISI Marked, and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixing in repairs modular switch 1 way,16Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixing in repairs modular type socket shuttered type 6/10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixing in repairs modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module with light indication ,240V,AC ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixing in repairs modular switch 2 way,10Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixing in repairs modular type step fan speed regulator 100/120 W, 2 module,230volts,AC, 360 degree rotation ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixing in repairs modular bell push 1 way,10Amps,1module,240V, ISI Marked and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

Supply and fixing in repairs call bell AC, 230 Volts single pole, multi music type ISI marked, and suitable for existing type as per site requirement and including removing old usnv items complete all as specified and directed.

M&L for preparation of new plastered of wall/ceiling or concrete surface of walls or concrete and applying two coats of 3 mm thick wall care putty complete all as specified and directed

M&L for preparation of old decorated surface of wall and apply two coats of white wash complete all as specified and directed

M&L for applying two coats of oil bound distember on wall or concrete over a coat of primer on prepared surfaces including,rubbing with sand paper after complete removal of existing treatment complete

Supply, laying & testing PVC insulated armoured, heavy duty electric cable with stranded aluminium conductor,1100 volts of cross sectional area 25 sqmm,4 core including testing complete all as specified and directed.Make:-Havells/polycab/Anchor

Excavation in trenches , not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft /loose soil complete all as specified and directed.

Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed

Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed

Supply and laying bricks burnt clay bricks sub class 'B' for cable of size 250 x 115 x 75mm for protection under ground cable complete all as specified and directed

Supply and providing river sand for cushioning with dry clean sand 15 cm below cable and 8 cm above the under ground cables and necessary fillings in the trenches and punning to provide required cover complete all as specified and directed.

ABC CONSTRUCTION COMPANY (BID ID -3117200)

M/s TECH TEAM (BID ID -3116136)

M/s M M Engineering Systems (BID ID -3117795)

M/s Bapujee Builders and Traders (BID ID -3117467)

S J ENTERPRISES (BID ID -3117824)