8125/SAR-T-16/2025-26 CAMOUFLAGE PAINTING TO CERTAIN BLDGS /HANGERS/ STRUCTURES/WALL IN DOMESTIC AREA AND TECHNICAL AREA AT AF STN SARSAWA UNDER GE (AF) SARSAWA

Amount

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar (1:4) on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound complete all as specified and directed. Note: Water proof compound will be measured and paid separately.

Supply only integral liquid water proofing compound (ISI marked) complete all as specified and directed.

M & L for rendering 5mm thick in cement mortar (1:3) on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying one coats of oil bound distemper over a coat of 1mm thick wall care putty of approved tint complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered surface of walls & applying two coats of cement base paint over a coat of red oxide primer complete all as specified and directed.

M & L for preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified and directed.

M & L for preparation of newly plastered/unplastered surfaces of ceilings & applying two coats of oil bound distemper (OBD) complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls and applying one coat of oil emulsion distemper (OBD) of approved shade/tint complete all as specified & directed.

M & L for preparation of old decorated surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint complete all as specified and directed.

M & L for preparation of old decorated plastered surfaces of walls and applying one coat of cement base paint of approved shade/tint complete all as specified & directed.

M & L for preparation of old decorated surfaces of walls, plastered including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old decorated surfaces of walls, plastered including cornices, pilasters etc and applying two coats of white wash complete all as specified and directed.

M & L for preparation of old decorated plastered/unplastered surfaces of ceilings & applying one coats of white wash complete all as specified and directed.

M & L for complete removal of existing treatment on walls/ceilings and preparation of surfaces of walls/ceilings and applying 1mm thick wall care putty complete all as specified and directed.

M & L for plaster/unplastered new/old surfaces on walls/ceilings and preparation of surfaces of walls/ceilings and applying 1mm thick wall care putty complete all as specified and directed.

M & L preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M & L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and drected.

M & L for 4mm thick frosted glass and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and directed.

M & L for preparation of old existing AC sheets/concrete/plastered surfaces of any description and at any position not otherwise described over 10 centimeter in width or girth and applying Two coat weather proof exterior emulsion paint over a coat of primer complete all as specified and directed. Note : (i) The new paittern Camouflaging /(Sigma pattern) of colour shall be as approved by the Eng-in-Charge/Airforce Authority. (ii) The rate quoted by tenderer is deemed to included in item for painting new paittern Camouflaging,(Sigma pattern) any type of Bldgs, (G+4 ) /wall including any height and width at AF Stn Sarsawa shall be made good by contractor without any extra cost to the Govt.

M & L for preparation of old existing AC sheets/concrete/plastered surfaces of any description and at any position not otherwise described over 10 centimeter in width or girth and applying one coat weather proof exterior emulsion paint complete all as specified and as directed Note : (i) The Camouflaging/Plain pattern of colour shall be as approved by the Eng-in-Charge/Airforce Authority. (ii) The rate quoted by tenderer is deemed to included in item for painting any height type of Bldgs/wall including any height and width at AF Stn Sarsawa shall be made good by contractor without any extra cost to the Govt.

M & L for preparation of old painted steel, galvanised sheet and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint in Camouflague pattern or plain or pattern as decided by Engr-in-Charge complete all as specified and directed. Note : The rate quoted by tenderer is deemed to included in item for painting any type of Rolling shutters and any type of Hangers including any height and width at AF Stn Sarsawa shall be made good by contractor without any extra cost to the Govt.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete all as specified and directed.

Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed.

Taking down Chowkatts or frames with shutters ( without taking off shutters from the frame) n exc 1.5 sq.each complete all as specified and directed.

S & F anodized aluminium frame with powder coating (minimum thickness 50 micron) and other sections for doors, windows, ventilators, partitions, with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m,with power coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified and directed.

S & F 5mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane complete all as specified and directed.

S & F 5mm thick Frosted glass in squares n exc 0.5 sq. m each pane complete all as specified and directed.

S & F anodized aluminium grill with power coating (minimum thickness 50 micron) of approved pattern and fixed to the existing window/ventilator frame with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all as per requirement complete all a specified and directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples & scrwed complete all as specified and directed.

Cutting openings through walls for door, window and other openings or enlarging existing openings, etc., or cutting out defective masonry for underpinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises complete all as specified and directed.

Dismantling of wall and ceiling boards with grid (fibre, pulp, insulation etc) of any thickness complete all as specified and directed.

M & L for false ceiling made out of E-board classic of size 595 x 595 x 4 mm thick, (as approved by GE) fixed with existing frame work fixing the board to frame complete all as per manufacurers instructions complete all as directed and specified.

M & L for GI frame consisting of main Tee of size 38.50 x 24.00 mm and cross Tee of size 28.50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with GI wire 3 mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/c(Size of grid 605 x 605mm) complete all as specified and directed.

M & L for preparation of complete removal of existing surfaces of walls apply distempering 2 or more coat with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed at any height incuding necessary scaffolding. Note : (i) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. (ii) 10 years product warranty at any height incuding necessary scaffolding.

M & L for exterior or interior waterproof/weather proof cement based 3 mm thick putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the new plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps complete all as specified and directed. Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI.

Dismantling Plain or corrugated any type sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M & L new pattern Camouflaging pre- painted galvatume aluminum zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, roofs,fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and directed.

M & L for new pattern Camouflaging Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,roofs, fixed with self tapping screws or L-type or J-type or cranked hook bolts as specified complete all as specified and directed.

M/S GURENDER SINGH (BID ID -3340199)

SUBHASH CHAND CONTRACTOR (BID ID -3341083)

RAJAN TRADERS (BID ID -3341705)

PANWAR CONSTRUCTIONS (BID ID -3341191)

NAQLI LAL SHARMA AND ARUN SHARMA (BID ID -3349375)

G.H. INFRASTRUCTURE PRIVATE LIMITED (BID ID -3341795)