REPAIR MAINTENANCE OF CHAJJA PROJECTION LEAKAGE SEEPAGE OF ROOF BATHROOM SUNKEN TREATMENT CERTAIN CONNECTED BR WORKS AT PC WING AMU DEMO MECH COY ACC UNDER GE MIS MHOW

Amount

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc but exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M & L for brick work with modular size bricks, straight or curved on plan exc. 6 m mean radius built in cement mortar (1:6), complete all as specified

All as per sl item No:2, but except bricks complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick plaster in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of water based emulsion paint over a coat of primer of same make complete all as specified and directed

M& L in repair for preparation of surface for application of water based epoxy resin coating of waterproofing for internal wall dampness and filling of cracks and making the surface smooth and finish complete all as specified.Note : (a) Complete removal of treatment/plaster(where needed) on internal walls and preparation of surface for application and making the surface wet .(b) apply first coat of Dr. fixit Dampguard in ratio(1U base:1U hardner:1U water) in one direction and leaving the coat to dry for 6 to 8 hrs.(c) apply second coat of Dr. fixit dampguard in ratio(1U base:1U hardner:1U water) in perpendicular direction to the first coat applied and leaving the surface to dry for 24 hrs. Material: Dr. fixit Dampguard or equivalent.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection and surface finish even and smooth with using extra cement including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

S & F in repair of vitreous china squatting Pan “Orissa” Pattern, of size (580mm x 440mm) white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding ccomplete all as specified and directed.

Supply and fix in repair of wash hand basins, vitreous china,of size (550x400) mm (flat back, or angle back type) white colour including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified and directed.

S & F in repairs of padestal pattern Vitreous china wash down water closet pan white including trap,PVC seat cover white, connection to drain (or out going pipe ) and to flushing pipe antisyphone pipe etc complete all as specified and directed

Supply & fix in repairs of white vitreous china urinal half stall type 350x390x600 mm (minimum) height with including providing & fixing of plugs bedding against wall in cement mortar (1:2) pointing around urinal back in cement mortar complete all as specified.

Supply & fix in repairs of Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S & F in repair of CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair of Bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe and fixed all as specified and directed

S&F in repair of 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S & F in repair of 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repair of CP fancy type stop valves ,cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed

S & F in repairs of CP Brass Fancy type shower rose 15mm dia with 125mm long CP Arm of approved quality complete all as specified and directed.

S & F in repairs of Wall mixture CP hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed.

S & F in repair of flush pipe of polyethylene of low or high density or PVC, 32mm dia for low level flushing cistern/basins complete as complete all as specified and directed.

S & F in repair of LDPE pipe 32mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

S&F in repair of stainles steel gratings round type 150mm size of (Min Weight 100 gms) complete all as specified and directed.

S&Fin repair of PVC valveless, syphonic action type flushing cistern,low/high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 ltrs complete all as specified and directed.

S & F in repair of 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

Taking up or down steel tubing 15mm bore & connections and S & F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

Taking up or down steel tubing 20mm bore & connections and S & F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

S&F in repair of gun metal gate valves 15 mm bore half turn with lever arm for iron pipes complete all as specified and directed.

Taking down door shutter with frame n exc 1.5 Sqm each without taking of shutter from the frame complete all as specified and directed.

S&F for PVC door frames of sizes (50 x 47) mm made out of 5 mm prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed.

S&F Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelam PVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F in repair of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S & F in repair of Galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples including takingout old wire mesh from steel window and fixing old steel flats and nut complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description as provided for Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) complete all as specified and directed.

S & F Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-w Gde-E-250 Quality-A complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S & F Pre- painted galvatume aluminum zinc coating GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed.

S & F of Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to Fe-410 Gde E-250 Quality A complete all as specified and directed.

S&F in repair of factory made steel Window , with side hung shutter including box type hinges with steel handle, stay complete without glazing bar and guard bar devetailed or welded complete all as specified and directed.

S&F in repair of steel ventilator fixed type with glazing bar complete all as specified and as directed

S & F of 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed

S&F of 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed.

S&F of 150 mm size aluminium anodized handle complete all as specified and directed.

M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girth on untreated steel surfaces over a coat of red oxide primer after preparation of surfaces complete all as specified and directed.

S&F in repair of 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed..

S&F in repair of 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed..

S&F of PVC ( SWR) bends any radius bore of 110 mm all as specified and directed

S&F of PVC ( SWR) bends any radius bore of 75 mm all as specified and directed

Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 500 Ltrs capacity complete all as specified.

S&F in repair of PVC tank Cover for OHT of 500 Ltr Tank capacity complete all as specified and directed.

S& F in repairs of sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed.

S&F in repair of CI Nahani traps 75 mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete (1:2:4) type B-1 complete all as specified & directed.

M&L welding in repairs not exceeding 2.5 cm in length to the metal not exceeding 6mm thick complete all as specified and as directed.

S & F in repair of PVC body bathroom cabinet with mirror fancy type of size (622 x 422) mm complete, Model No 555 of PRAYAG or equivalent as approved complete all as specified and directed.

S & F in repair of plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified and directed.

M & L for preparation of surfaces of bldg No plate / tab of any size and apply one coat of synthetic enamel paint and writing letters or figures (Block, Roamn, Italic or Indian) of not less than 50 mm height and not less than15mm width incl, stops, commas, lines etc complete all as specified and directed.

Taking down old tarfelt of existing water proofing on RCC roof/sunken slab surfaces including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. removing from out site of defence land complete all as specified and directed.

Demolition of cement concrete (unreinforced) in roof/terrace other than ground floor etc, including existing roof treatment of any description not exceeding 15cm thickness as directed and specified.

M & L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in levelling course finished even and smooth for laying floor finishes etc all as specified and directed.

M & L for 15 mm thick cement plaster on roof surface finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete all as specified and directed.

M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid seperately.) complete all as specified and directed.

M & L for 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm each coat on APP Membrane surface as on non assesible area complete all as specified and directed.

Material and labour for Plain Cement concrete (1:5:10), type E-2 with using 40mm graded stone aggregate in filling of sunken floor as directed and specified.

Dismantling floor or wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for glazed ceramic coloured tiles (450mm x 300 mm) size 6 to 7mm thick in dados or skirting over & including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles as directed and specified.

M & L for Non skid ceramic tiles coloured, 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exc 0.11 Sqm, over & including 15mm thick screed bed in CM (1:4) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles as directed and specified.

M & L for vitrified ceramic tiles of size 10 mm thick (light shade) (Square/rectangular) area of each tile n exc 0.36 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over and including 15mm screed in CM (1:4) complete all as specified and directed.

All as per item No 74 above but as in skirting over & including 10mm thick screed in CM (1:4) complete all as specified and directed.

M & L for Non skid ceramic tiles coloured, 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.11 Sqm but n. exc 0.18 Sqm over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles as directed and specified.

M & L for Glazed ceramic tiles of size (300mm x 200mm) x 7 to 8mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry in cement screed 10mm thick in CM 1:4 and pointed in coloured cement to match complete all as specified and directed.

Material and labour for provide PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete as directed and specified.

Material and labour for cutting holes in brick walls built in cement mortor at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM 1:3 and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete as directed and specified.

M & L for RCC Type B-1 (1:2:4) using 20 mm graded stone aggregate as in Slabs supported on walls, in shelves and the like etc complete all as specified and directed.

S & F of Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping

M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and similar works complete all as specified and directed.

M & L for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M & L for RCC (1:2:4) type B-1 (Normal Mix) using 20 mm graded stone aggregate as in chajja, landings etc complete all as specified and directed.

M & L for mild steel framed work such as grills grating witn ends of bars/guard bar welding with framed.

Taking down and re-fixing of Old Aluminium door shutters in same opening with necessary required repairs and fittings including glass rubber beading and glazing clips (Glass pan and wire guage will be measured and paid separately area exc 2.00 Sqm but n Exc 4.00 Sqm each) complete all as specified and directed.

Taking down and re-fixing of Old Aluminium window shutters in same opening with necessary required repairs and fittings including glass rubber beading and glazing clips (Glass pan and wire guage will be measured and paid separately area n. exc 2.00 Sqm each) complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete all as specified and directed.

M & L for Providing and fixing of 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over metal frame work complete all as specified and directed.

S & F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed.

S & F of Anodised aluminium snap grid size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M & L for Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in (600 mm x 600mm) grid (Frame work for ceiling shall be measured and paid separately) complete all as specified.

Taking down shutters of any description exceeding 1 sqm but n exc 2 sqm each complete all as spd and directed

Taking down shutters Shutters of any description n exc 1 sq. m each complete all as spd and directed

M & L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

M & L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

NIDHI CONSTRUCTION

M/S Sunshine Construction

KAILASH CHANDRA KHANDELWAL