Construction of shed in Vidyarthi Market in Durga park and renovation of Chabutra kanpur nagar

Earth work in excavation in foundation in ordinary soil up to 1.5 mtr lift & 30.0 mtr lead etc all complete.

1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size DSR 4.1.8

Providing and laying cement concrete Retaining Walls return wall Wall (any thickness) including attached pilaster coloumns piers abutments pillars posts struts buttresses string or lacing course parapets coping bed blocks plain window sills fillets sunken floor etc . up to floor five level excluding the cost of centring shuttering and finishing.. 20 mm nominal size ...... Complete item DSR

Providing and laying cement concrete Retaining Walls return wall Wall (any thickness) including attached pilaster coloumns piers abutments pillars posts struts buttresses string or lacing course parapets coping bed blocks plain window sills fillets sunken floor etc . up to floor five level excluding the cost of centring shuttering and finishing.. 20 mm nominal size ...... Complete item DSR

MS or iron work in plain work such as reinforced concrete wrought to required shape as necessary including bending for proper completion of the work.As Per Analaysis

Painting on ms Structure…....... Complete item

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. SI.No-10.15.1

Providing and fixing foundation bolts including nuts & washer complete. ( DSR : 10.20)

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR : 12.50)

Retro-ReflectiveSheeting type-XI with 4 mm thick ACM Single Side Providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-67:2012 retro reflective sheeting with back frame MS angle of 35x35x5 mm. Legends, letters, numerals and borders etc should be as per MORTH specification No-801.3.7 The sheeting shall have a pressure-sensitive adhesive of the aggressive-tack type requiring no heat solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer. The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting Micro prismatic type IV Retro reflective sheeting confirming to ASTM D4956-09 shall be Pressure fixed. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge (SOR- MorTH- 801)