Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.5 LAccepted-AOC | L1 | Accepted-AOC REASONABLE | |
| 2 | L2₹10.4 L+₹81,568.30 (8.55%)Rejected-Finance | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹10.6 L+₹1.1 L (11.1%)Rejected-Finance | L3 | Rejected-Finance HIGH RATE | |
| 4 | L4₹10.8 L+₹1.3 L (13.2%)Rejected-Finance | L4 | Rejected-Finance HIGH RATE | |
| 5 | L5₹10.9 L+₹1.4 L (14.7%)Rejected-Finance | L5 | Rejected-Finance HIGH RATE |
Tender Value
₹9.6 L
EMD Value
₹19,500
Closing Date
20 Dec 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AJIT KUMAR DWIVEDI,AE (E/M)
AGE (I) AF SINGARSI
Provn of weather Shelter and allied works at Main Gate at AF Station Singarsi
2022_MES_566270_1
C/8590/E8
Open Tender
Civil Works
Item Rate
180 days
AGE (I) AF SINGARSI
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Yes
AGE (I) AF SINGARSI
₹19,500
Yes
3 Jan 2023
30 Nov 2022
21 Dec 2022
30 Nov 2022
20 Dec 2022
8 Dec 2022
Amount
Dismantling of Sign Board (Horizontal Board & Column Board) from the site carefully and refixing and repositioning of sign board at same position etc complete all as directed by Engr-In-Charge. (NB: If any damage, same shall be repair by the contractor within the quoted rate.)
M&L for Dismantling wrought iron or mild steel work of any description not otherwise provided for etc, complete all as specified and as directed.
Demolition of stone slabs, Paving Blocks and stone tiles of any description or thickness laid, bedded and pointed in any mortar as in floors, approaches etc including disposing off the retrieved debris outside the premises, complete all as specified and as directed.
Demolition of cement concrete reinforced (reinforcement ) in above ground floor and pavings not exceeding 15 cm thick, including removal, complete all as specified and as directed.
Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out returing filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm in soft/loose soil, complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft /loose soil, complete all as specified and as directed.
Removing excavated material n. exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point, complete all as specified and as directed.
Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25 cm thick in soft/loose soil ,complete all as specified and as directed.
M&L for PCC 1:4:8 type D2 using 40mm graded aggregates in foundation filling and mass concrete as in lean concrete, complete all as specified and as directed.
Material and labor for P.C.C type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in sub base floor and plinth protection, complete all as specified and as directed.
M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 etc, complete all as specified and as directed.
M&L for R.C.C (20 mm graded aggregate in Design mix of M-25) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc, complete all as specified and as directed.
M&L for R.C.C (20 mm graded aggregate in Design mix of M-25) for Columns, pillars, piers, posts etc, complete all as specified and as directed.
M &L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortal (1.4) for external brick surface finished even & smooth, complete all as specified and as directed.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Ditto,as above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed.
M&L for use and waste of Formwork in rough finished surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams in rough finish of concrete surface etc, complete all as specified and as directed.
M&L for use and waste of Formwork in rough finished surface to sides of pillars, posts, struts, piers, columns and stanchions in rough finish of concrete surface etc, complete all as specified and as directed.
M&L for Cutting holes into or through cement concrete slabs,column, chajjas, etc. reinforced or otherwise exc 100 Sqcm but n.exc 250 sqcm and required cutting through reinforcement and portion in cement concrete 1:2:4 Type B-1 as required, complete all as specified and as directed.
M&L for Cutting holes in exc one brick but not exc two brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4 Type B-1 as required, complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of Camouflaged painted colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of Camouflaged painted colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.
M&L for fabrication and erection of steel Framed work except steel only as in steel frame , doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and as directed.
S&F of Plates of Fe-410W(GdeE-250) (plain) square or rectangular cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment to base of column, Steel Post and Truss etc, complete all as specified and as directed.
M&L for Rolled MS Section Framed brackets of Channel section (MC 200) as in framing for column , post cut to shape, drilled for screw, including riveting or welding, conforming to Fe-410W(GdeE-250) quality A etc, complete all as specified and as directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including necessary welding, fabrication Fe-410W(GdeE-250) quality A etc, complete all as specified and as directed.
S&F 15 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, complete all as specified and as directed.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood /steel trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer, complete all as specified and as directed.
M&L for preparation of old treated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of 1st grade quality complete all as specified and as directed.
M&L for applying two coats of cement based paint incl preparation of new plastered surface, complete all as specified and as directed.
M&L for 15 mm thick machine cut, pre-polished Block Jet, premium quality, granite stone slab, in skirting, Kitchen platform, dado etc laid over and including 15mm thick CM 1:3 screed bed, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with the shade of granite stone including rounding / moulding the edges half round, complete all as specified and as directed.
M/S AMARNATH AGARWALLA
M/S ASHA ENTERPRISE
LALAN SHARMA
DANATION CONSTRUCTIONS
M/S New Builders Corporation
M/S Subhadip Enterprise
M/S KUMAR AVINASH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .