REPAIR TO JOINERY ROOF SHEETS FALSE CEILING AND ALLIED WORKS IN CERTAIN BUILDINGS UNDER AGE BR II OF GE AF ADM AREA AT AF STATION AGRA

Amount

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each complete all as specified and directed.

Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 sqm and n. exc. 4.00 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 sqm & n. exc 2 sqm each complete all as specified and directed

S&F factory made solid PVC door frame of size 50mmx 47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixed with screws and rawl plugs complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 2nd class hard wood Kiln seasoned and chemically pressure treated glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

S&F Box type steel windows/ventilators with side hung shutters with glazed and gauzed double panel shutters both provisions including box type hinges or factory made butt hinges with steel handle, tower bolts, hold fasts and steel peg stays etc. complete without glazing bars dovetailed or welded and 10mm square guard bars @ 125mm c/c both way complete as per drg No. CE/ALD/TD-172 sheet No 1/2 to 2/2 complete all as specified and directed. Note: PCC for fixing holdfast, wire cloth and glass shall be measured and paid separately.

S&F mild steel framed work with rolled mild steel sections as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F pressed steel door frame of size 125 x 60mm with one or more rebates, made out of 1.25 mm thick MS sheets including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and fixed complete all as specified and directed.

S&F pressed steel door frame of size 105 x 60mm with one or more rebates, made out of 1.25 mm thick MS sheets including necessary fixing lugs, hinges, lock strike plate, etc. complete as specified and fixed complete all as specified and directed.

M&L for welding in repair exc. 2.5 cm but not exc. 5 cm in length, thickness of metal to be welded not exc. 6 mm complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in copings, hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

S&F 100 mm size stainless steel, butt hinges, medium weight ISI marked and fixed with screws complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long ISI marked and fixed complete all as specified and directed.

S&F alumunium handle, cast type, anodised 150 mm long ISI marked complete all as specified and directed.

S&F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.

S&F 3 mm thick sheet glass ordinary quality and fixing to aluminium door/window with aluminium srtip, rubber packing, wooden fillets or beads or with rivets/pins etc. in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and fixing to aluminium door/window with aluminium srtip, rubber packing, wooden fillets or beads or with rivets/pins etc. in squares not exceeding 0.50 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) complete all as specified and directed.

S&F figured glass, 3 mm thick, pin head type and glazing with oil putty or wooden beads in squares exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturer's complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Resecuring or easing and adjusting shutters of door, window and ventilators of any description and any location to make shutter functionable without taking down shutters complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repair 18/19 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws or rubber beads to timber or metal frame work complete all as specified and directed.

S&F in repair 18/19 mm thick UPVC board, both side laminated with decorative choice lamination, fixed with screws or rubber beads to timber or metal frame work complete all as specified and directed.

S&F in repair steel roller for show case shutter of any description, size and in any position fixed with glue/ screws complete all as specified and directed.

S&F in repair PVC/ SS handle for show case shutter of any description, size and in any position fixed with glue/ screws complete all as specified and directed.

M&L mild steel work as in fittings for steel door/window/ventilator, bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed.

S&F in repair suspended false ceiling with "E" grid suspended ceiling grid system of grid size 600 x 600 mm with GI frame work of main runner 38 x 24 mm sheet thickness 0.4 mm, cross tee 28 x 24 mm sheet thickness 0.3 mm and wall angle 24 x 24 x 0.3 mm including 4 mm thick non asbestos fibre cement bldg disigner board conforming IS-14862 type B cat 3 of oceanic texture and ivory colour of size 595 mm x 595 mm to be placed in the grid suspended by 4 mm dia GI wire at distance n. exc 1.2m center to center with butterfly clips complete all as specified and directed.

S&F in repair hollow PVC wall lining consisting of 6 mm thick wood grain printed PVC sheet including wood grain print fillets to match wall lining fixing at site on wall with screw complete all as directed.

S&F in repair 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc. and fixed with 'L' or 'J' type hook or cranked hook bolts complete all as specified and directed.

S&F in repair 6 mm thick asbestos cement serrated ridge for corrugated or semi corrugated sheets fixed with 'L' or 'J' type hook or cranked hook bolts complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based corrugated steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including including taking down steel sheeting or ridge in roof coverings complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including taking down steel sheeting or ridge in roof coverings complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in hight, copings, kneelers, roof kerbs, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M&L for preparation of old treated wooden or wood based surface of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old treated steel surface of any description exceeding 10 cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed.

M&L for green marble work (Baroda green) 18-20 mm thick (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match with and rounding the outer edges and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 including dismantling of stone slabs and tiles of any description and thickness complete all as specified and directed.

M&L for granite stone 20 mm thick (of any type) glazed (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match with and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 dismantling of stone slabs and tiles of any description and thickness complete all as specified and directed.

S&F in repair drapery rod fancy type, made out of 25mm dia MS PVC coated pipe having wall thickness 0.63 mm bright finish, plastic finial of 28-29 mm bore, decorative type, fixed to ends of rod and mild steel prepainted/PVC coated brackets suitable to hold the drapery rod and fixed to wall with the help of 2 Nos 50mm long steel screws and rawl plug, colour and pattern as approved by GE complete all as specified and directed.

S&F in repair 300 mm, mild steel rat tail rod pattern spring including roller and roller plate of flat iron 40 x 3 mm, 75 mm long fixed to stone/ concrete/ wooden/ metal chowkhat with screws or welding complete all as directed.

M&L for post construction anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300 x 200 x 6-7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:3 on other than fair faces of brick wall finished rough to fix tiles including dismantling of existing tiles complete all as specified and directed.

M&L for applying and two coats of distemper oil emulsion over a coat of primer on new surfaces of walls including preparation of surface complete all as specified and directed.

M&L for rendering 15 mm thick on brick work or concrete surface in cement mortar 1:6 finished even & smooth without using extra cement including taking down existing plaster complete all as specified and directed.

Abhi Construction

M/s M S Sharma and Co.

Shiv Krishan Associates

M/S SINGH ELECTRIC CO