Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.1 CrAccepted-AOC | ₹41.1 Cr | L1 | Accepted-AOC Being lowest Bidder |
| 2 | L2₹41.9 CrRejected-Finance STREET NO 11 SECTOR NO 04 TILAK NAGAR SAGAR ROAD BIKANER RAJASTHAN 334001 | BIKANER | RAJASTHAN | 334001 | ₹41.9 Cr | L2 | Rejected-Finance Being higher bidder |
| 3 | L3₹42.8 CrRejected-Finance | ₹42.8 Cr | L3 | Rejected-Finance Being higher bidder |
| 4 | L4₹43.2 CrRejected-Finance 35 B BHERU VILLAS SARDAR CLUB SCHEME AIR FORCE JODHPUR 342 011 RAJASTHAN | JODHPUR | JODHPUR | RAJASTHAN | 342011 | ₹43.2 Cr | L4 | Rejected-Finance Being higher bidder |
| 5 | L5₹43.9 CrRejected-Finance | ₹43.9 Cr | L5 | Rejected-Finance Being higher bidder |
Tender Value
₹52.8 Cr
EMD Value
₹15 L
Closing Date
3 Feb 2020, 6:00 pmClosed
HQ CEJZ JODHPUR
HQ CEJZ JODHPUR
PROVISION OF OTM ACCN AT JAISALMER (JOB NO. S/2950)
2019_MES_292746_1
800476/E8
Open Tender
Civil Works
903 days
JAISALMER
AS PER NOTICE OF TENDER
13 documents required · 13 mandatory
₹3,000
GE(A)(P) NO 01
₹15 L
Yes
HQ CEJZ JODHPUR
27 Feb 2020
25 Oct 2019
5 Feb 2020
25 Oct 2019
3 Feb 2020
27 Jan 2020
7 Nov 2019
Amount
Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 31(R)
Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 34(R)
Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY " as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 36(R)
Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 40
Lump sum price worked out by the contractor for "ROAD, PATH & CULVERT & HARDSTANDING" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 44
Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 46
Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 47
Lump sum price worked out by the contractor for "FENCING, COMPOUND WALL AND GATE" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 50
Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 51
Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 56(R)
Lump sum price worked out by the contractor for "SUMMER APPALIANCES" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 57(R)
Lump sum price worked out by the contractor for "LIGHTING PROTECTION" as listed in Schedule ‘A’ Part-XII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 58
Lump sum price worked out by the contractor for "RAIN WATER HARVESTING" as listed in Schedule ‘A’ Part-XIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 59(R)
Lump sum price worked out by the contractor for "RETAINING WALL" as listed in Schedule ‘A’ Part-XIV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 60(R)
Lump sum price worked out by the contractor for "HOT WATER SUPPLY" as listed in Schedule ‘A’ Part-XV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 61(R)
Lump sum price worked out by the contractor for "ARBORICULTURE" as listed in Schedule ‘A’ Part-XVI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 62
Sch 'A' PART-XVII (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.
INTERNAL ELECTRIFICATION S&F energy saving 9 watt LED bulb complete all as specified and directed.
S&F decorative box type LED tube light fitting 1x9/10 watt including LED tubular lamp with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed. Make: Havells: Cat part No - LUMILINES9WLED865PCWH or equivalent as per Appx 'C'.
S&F decorative box type LED tube light fitting 1x20 watt 1200 MM CRCA Housing, including Detachable type LED tubular Lamp / Rod with IP20 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed. Make: Crompton: Cat part No - LGT8-20-865-2 for LED tube and DMLN1LT8-16 for LED batten or equivalent as per Appx 'C'.
S&F box type LED flame proof tube light fitting 1x16/20 watt including LED tubular lamp with IP65 protection, inbuilt driver etc complete with all accessories internally pre-wired including connecting up with twin core twisted flexible copper conductor cable of 1.0 sq. mm size complete all as specified and directed. Make: Crompton: Cat part No - EXTN1LT8-20 or equivalent as per Appx 'C'.
S&F 36/40 watt slim design LED recessed fully open 2x2 tile, glare free uniform illumination with integral driver complete all as specified and directed. Make: Crompton: Cat part No - LCTLRNI-36-FO-CDL or equivalent as per Appx 'C'.
S&F heavy duty, exhaust fans of 250 mm sweep suitable for SP 230/250 v 50 Hz AC supply complete with louver shutters including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed. Make: VENTILUS of Crompton or equivalent as per Appx 'C'.
S&F heavy duty, exhaust fans of 300 mm sweep 1400 RPM ISI Marked suitable for SP 230/250 v 50 Hz AC supply complete including fixing/grouting of frame in wall and cutting opening complete and connecting with and including 3 Nos 1.5 Sqmm single core, PVC insulated but unsheathed FRLS cable with multistranded copper conductors from ceiling rose to fan complete all as specified and directed. Make: EXHD-300-4-1 of Crompton or equivalent as per Appx 'C'.
S&F 12 watt LED porch light all as specified and directed. Make: Crompton: Cate part No - LCDSPLN-R-12-CDL or equivalent as per Appx 'C'.
S&F ceiling fans 1200 MM sweep Size, BEE Energy efficient 5 star rated Powered With Activ BLDC Technology, conforming to latest BIS Licensing and IS Specifications, which consumes Less then 50% of the power as compared to conventional type Fans, Power Consumption 32 to 35 Watts, RPM 370 +- 25%, Service Value >= 6.0, Air Delivery in CMM = 220, down rods, All including connection with single core PVC insulated but unsheathed, FRLS cable with multistranded copper conductors IS 694 marked, from ceiling rose to fan complete all as specified and directed. Make: Crompton: Energion HS or equivalent in USHA/Havells as per Appx 'C'.
S&F wall mounted fan 450 mm sweep single phase 240 volts complete all as specified and directed. Make: Crompton: Cat part No - i-FLO or equivalent as per Appx 'C'.
S&F Air circulator 450 mm sweep wall mounted single phase 240 V complete all as specified and directed. Make: Crompton: Cat part No - ACVORTEX18WM or equivalent as per Appx 'C'.
S&F LED Security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 10 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT3000-6000 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistranded copper conductor sheathed cable of size 1.0 SQMM fixed with & copper conductor sheathed cable of size 1.0 SQMM fixed with & including bracket made of GI Pipe 40mm bore light grade , 1.5 Mtr long bend shape required with 2 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed
Note for item No 29.00 : (1) The LED lights shall have gurantee for 5 Years from date of completion of contaract , any defects noticed during this period shall have be rectified / Parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NABL.Cat No. LSTS-30-CDL of Crompton or equivelent as per make listed in Appx 'C'.
S&F MCCB Distribution board, concealed fluch to wall for mounting MCCBs and MCBs , factory made, fabricated out of CRCA sheet not less than 1.20mm thick fitted with DIN channel , neutral link ,DBs shall be semi glossy finished with epoxy polester based powder paint process to ensure smooth finish and protection against corrosion atmosphere, the DBs shall be double door type with hinged door with locking arrangement. the DBs shall be of same make as MCCBs, DB shall also be provided with lable marking indicating the incoming and outgoing circuits on all ways specified . the DBs shall be IP 43 protection class for the following:
MCCB DB suitable for 125 Amp TPN 4 way
MCCB DB suitable for 125 Amp TPN 8 way
S&F of MCBs/MCCBs, of following rupturing capacity, IS-8828 marked of the undermentioned type and rating and fixing in DBs (DBs catered separately in this Schedule)
SP MCB 6 to 32 Amp 10 KA rupturing capacity
SPN MCB 32/40 Amp 10 KA rupturing capacity
TPN MCB 32/40 Amp 16 KA rupturing capacity
TPN MCB 63 Amp 16 KA rupturing capacity
FP MCCB 63 Amp 25 KA rupturing capacity
FP MCCB 100 Amp 25 KA rupturing capacity
M&L for Sub main wiring with Two runs of 4.0 Sqmm size main cable and one run of 4.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specified & directed.
Ditto all as per item No. 32.00 here in before but of size 6.0 sqmm complete.
M&L for Sub main wiring with four runs of 10.0 Sqmm size main cable and two run of 10.0 Sqmm size earth continuty conductor of single core PVC insulated but unsheathed FRLS cable multi standed copper conductors, 1100 volts grade, IS-694 marked all drawn through and including suitable size rigid PVC conduit pipe medium grade ISI marked & fittings/ accessories all fixed to the surface of wall/ceiling complete all as specified & directed.
S&F T.V./Telephone Socket Outlet, including M.S. Box of size 100mm x 100mm x 65 mm with cover plate complete all as specified and directed.
M&L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6.3 mm thick buried directly in ground vertically (in earth pit not less than 2.25 metre deep below ground level) with the top edge of earth plate at a depth not less than 1.5 metre below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI earth wire 4 mm dia bolted (with GI nuts, bolts & check nuts) and rivetted to earth (Plate) electrode at one end and connected to main switch board / DB at the other, earth wire protected by and including GI pipe 15 mm dia (medium grade) from top of electrode to main switch board and also including watering pipe GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation & earth work, etc as shown on electrical plate No 3 of SSR Part I.
ROAD, PATH & CULVERT S&F traffic sign board of triangle shape with 30 cm length each side of circular shape with 0.6 mm dia with MS sheet including MS pipe of height 2.0 m above GL and including excavation of post holes, removal and packing with PCC 1:3:6 type C-2 of size 45 cm x 45 cm x 60 cm complete including lettering with reflective sheets, painting, fixing etc complete all as specified & directed.
M&L for marking 2.00 mm thick centre line dashes, arrows,brackets & similar work on road surface as par IRC pattern with thermoplastic Paint of approved make & mix with 8% mica applying with special applicator machine complete and making trafic diversion arrangements complete all as specified & directed.
S&F ABS Plastic speed breaker product code AP-1004 Make ACME or equivalent of size 350 mm wide and 50 mm height in yellow and black colour (alternatives) complete all as per manufacture instruction and as directed.
S&F cat eye two ways reflective of size 100mm x 100mm x 18.5 mm with aluminium body with reflective panies amber/red/white complete all as specified & directed. Make:- Simens/Dark eye/Solar/Road star/Alfa Gold as approved by GE.
S&F delineator made out of 65 mm internal dia MS circular hollow pipe of 750 mm long medium weight ends covered with 150 mm x 150 mm x 3 mm thick and top end covered with 100 mm x 100 mm x 10 mm thick mild steel plain sheet top portion covered with white and coloured high intensity prismatic grade retro reflective sheeting in 50 mm wide strips of each colour (150 mm width) reflective band shall be used complete all as specified & directed.
SEWAGE DISPOSAL M&L for on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, conconnection etc. complete With UPFLOW FILTER INLCUDING MEDIA for 10 users complete all as specified & directed.
M&L for Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc. complete for 50 users all as per drawing NO. CEJZ/TD/30 Sheet 1/3 to 3/3.
Ditto all as per item No. 43.00 here in before but of 100 users complete.
Ditto all as per item No. 43.00 here in before but of 150 users complete.
M&L for construction of soakage wells excavation in any type of soil,foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.20 m dia x 3.00 m effective depth all as per drawing No. CEJZ/TD/29 sheet 1/3 to 3/3.
Ditto all as per item No. 46.00 here in before but of size 2.40 m dia x 3.00 m effective depth complete.
Ditto all as per item No. 46.00 here in before but of size 3.0 m dia x 3.0 m effective depth complete.
Ditto all as per item No. 46.00 here in before but of size 3.0 m dia x 4.50 m effective depth complete.
EXTERNAL WATER SUPPLY Supply & laying for centrifugally cast (spun) ductile iron pressure pipe of 200 mm bore with socket & spigot ends including specials having ISI stamping marking with IS 8329/2000, classification "K-7" in standard length of 5.50/6.0 mtrs with cement mortar lining complete all as specified & directed.
Ditto all as per item No. 50.00 here in before but of 150 mm bore complete.
Ditto all as per item No. 50.00 here in before but of 100 mm bore complete.
Ditto all as per item No. 50.00 here in before but of 80 mm bore complete.
Supply, installation, connecting and testing sluice valve, non rasing type spindle, cast iron body & wedge with Bronze wedge ring on both side, gland packing, class - PN 1.0 with flanged ends drilled suitable for bore of pipe 200 mm ISI marked (IS:14846:2000) having S.S spindle with iron wheel at top, complete with nuts bolts washers rubber gasket etc all as specified and directed.
Ditto all as per item No. 54.00 here in before but of 150 mm bore complete.
Ditto all as per item No. 54.00 here in before but of 100 mm bore complete.
Ditto all as per item No. 54.00 here in before but of 80 mm bore complete.
M&L for construction of stone masonry valve pit chamber of size 900mm x 900mm x 900 mm type 'B' complete with MS cover of 3 mm thick sheet and angle iron frame 40x40x6mm size with locking arrangement including necessary excavation and earth work in any type of soil, PCC in foundation, plastering and two coats of anti corrosive paint over one coat of primer complete all as specified, shown in drawing No.CEBZ/TD/43/2011 sheet 1/1 and as directed.
Ditto all as per item No. 58.00 here in before but of size 900mm x 900mm x 600 mm type 'B' complete.
Ditto all as per item No. 58.00 here in before but of size 450mm x 450mm x 600 mm type 'B' complete.
S&F Non return valve (NRV) conforming to IS 4038 of 80 mm dia complete all as specified & directed.
Supply, install, testing and commissioning of manufacturer's factory assembled and tested electric driven centrifugal pump set of capable of delivering 30 LPS at 35 meter head comprising of horizontal spilit casing pump multi stage CI body with impellers operating at 1440/1450 RPM coupled through a flexible coupling to a SPDP motor 1440/1450 RPM not less than 15 HP complete with starter and mounted on common MS base frame and foundations of the pump sets including PCC foundations, MS bolts with nuts and anti vibration pads. The work also includes the followings:-
(a) Pump set capable of delivering 30 liters per second at 35 meters head coupled with electric driven motor of suitable size of make Kriloskar Brother or Equivalent of Mather& platt/ KSB. (b) GI suction pipe medium grade not less than 100 mm bore of suitable length but not not less than 10 meter and tapper connection pices etc. (c) GI Delivery pipe medium grade not less than 80 mm bore of suitable length but not less than 6 meters and taper connecting pieces etc. (d) CI foot valve fixed with leather washer of suitable size, lift and swing single door, IS- 4030 marked. (e) Provn of suitable automatic starter complete with under voltage and overload protection, Single phase preventer mounted in cubical type indoor panel made out of CRCA sheet 3.0mm thick with MCCB 100 Amps as incomer and also including necessary wiring with PVC insulated and unsheathed copper conductor cable multistarnded of suitable size, concealed in light grade GI or flexible pipe having angle iron base of size 50x50x6 mm of suitable size 45 cm above ground level and 30 cm label in floor/pcc all as specified and directed. (f) Vacuum gauge - 01No. (g) Pressure gauge diaphragm type upto 50kg/sqcm - 01No. (h) Priming arrangement of pump set by providing GI pipe 20mm bore, medium grade, gate valve etc from existing line (Not more than 10m away) with all fittings etc complete - 1Job.
a) copper bus bar capacity 200 Amps for Phase-R-Y-B-3 Nos & 200 Amps for neutral - 1 No b) MCCB TPN 35 KA 100 Amps- 1 Nos(I/C) c) MCCB TPN 35 KA 63 Amps - 2 Nos (For centrufugal pump-02) d) MCB TPN 35 KA 40 Amps - 2 Nos (for pumphouse bldg-01, building security light- 01)
S&F Flexible submersible use copper cable of flat/circular 3 phase 3 core suitable for 1100V, 50 Hz of size 16 sqmm including light grade pipe for protection with direction by Engr -in-charge for making connection from main panel to starter and starter to electric motor complete all as specified & directed.
Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete as specified & directed.
M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as specified and directed. Note:- For the purpose of payment only punned thickness will be measured.
EXTERNAL ELECTRIFICATION M&L for 15 meter high galvanized mast made out of heavy duty MS pipe section reducing from bottom to top 15 mm thick bottom plate fixing arrangement with 20 mm dia foundation bolts grouted in PCC foundation including necessary civil work etc completewith fixing arrangements for 9 latern LED fittings symmetrically fixed along with their control gear and having two point suspension system with steel wire rope of 6mm dia & double drum winch complete all as per manufacturer recommendations comprissing of following :-
(a) Fabricate , supply , install , test and commessioning of LT outdoor total enclosed LT panel board of size 0.75 x 0.50 x 0.30 meter approx tottaly enclosed made out of 3mm thick CRCA sheet , dust and vermin proof with front opening 440v,3 phase, 4 wire having 200 Amps capaciy aluminium bus bar insulated with sleeves , incoming MCCB TPN 63 Amps 440 volt 25KA 01 No and copper wiring with multistaranded cable including timer switch electronic type 01No with nessary MCBs SP20 Amps 09Nos contractors etc, cable glands . lugs and two coats of synthetic enamel paint over a coat of red oxide primer and making necesssary pedastal 300mm height from floor level with PCC work. (b) Provision of wiring from panel to light fitting with single/multi core 4 SQMM coper conductor cable drawn through rigid/flexible conduit with necessary fitting etc. (c) Provision of single point air termination rod and necessary fitment required for protection against lightening protection. (Earthing shall be measured and paid separately) (d) provision of motorised hosting and lowering of lights carriage for repairs. (e) Provn of Aviation Light indicator all as specified and directed by Engr-in-Charge
M&L for earthing complete with galvanized steel earth electrode 60 cm x 60 cm x 6mm buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with the top edge not less than 1.5 mtr below ground level connected to galvanized iron strip 32x6 mm by means of bolts, nuts, chock nuts and washers and other end connected to earthing test point including funnel, watering pipe of 20 mm bore (Light grade) GI pipe wire mesh, charcoal or coke and common salt in alternate layers all around the earth electrode compacted thickness 15 cm, earthing pit in PCC (1:3:6) type C1, 50 mm thick pre cast RCC cover slab (1:2:4) type B1 set in CM (1:4), reinforced with 8 mm dia TMT bars @ 15 cm c/c and suitable handle of 10 mm dia MS round bars including earth work in excavation in soft/loose soil, desposal of soil not exc. 50 meter complete and testing on completion all as shown in electrical plate No-3 of MES schedule, part-I complete all as specified and directed.
NOTE FOR ITEM NO. 68.00:- (i) Item includes the cost of 7.5 m GI pipe 40 mm bore light grade for protection of GI strip (ii) Item includes the cost of 7.5 m of GI strip (iii) PCC pit shall be provided at least 0.5 mtr away from earth pit and not on the earth pit itself and the extra cost of additional length of watering pipe bends, elbow etc shall be deemed included in the unit rate quoted.
M&L for earthing complete with galvanized earth plate electrode of size 600X600X6mm thick buried directly in ground, (earth pit not less than 2.25m deep below normal GL) with top edge of the earth plate not less than 1.25m below normal GL connected with galvanised iron strip of size 25 x 4 by means of check nuts, bolts, nuts, washers of GI of steel all as shown in plate no. 3 of MES sch. SSR Part -I, connected to earthing test point all as specified and testing on completion including provision of earth lead protected by 40 mm bore light grde GI pipe and watering pipe shall be 20 mm bore medium grade GI pipeincluding all excavation & earth work in all type of soil, PCC pit with, RCC cover, charcoal, salt, funnel etc complete.
M&L for Chemical earthing complete with copper earth plate of size 90 x 60cm x 5mm with eletro copper earth strip 32 x 6 by means of check nuts, bolts, nuts, washers of brass all as shown in plate no. 3 of MES sch. Pt 0I, connected to earthing test point necessary excavation, earth work, PCC, RCC cover, watering by funnel etc all as specified and directed by Engineer-in-Charge complete including testing on completion.
Supplying, install and errect in true vertical position steel tubular swaged welded pole, 11.00 mtr long, conforming to IS-2713 part-II, type 410 SP-55, complete with cast iron/MS base plate 6mm thick and of size 300x300mm, finial taper, pole cap, bolts, nuts, washers & screws etc. pole made out of ERW M.S tubing including of holes required Nos and size for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embedded in concrete, painting six signal red and yellow colour bands alternatively from lower portion of exposed pole starting from plinth block, each band of 300mm height at 300mm spacing, painting pole number, letters/figures by black paint complete all as specified and directed.
Ditto all as per item No. 71.00 here in before but of type 410, SP-31 9.00 mtr long complete.
S&F LED street light made out of pressure die cast aluminium housing enclosed with heat resistance glass and matrix of power LEDs , IP 65 protection, 40 Watt mounted on MCPCB complete having surge protection 5KA inbuilt including connecting with PVC insulated sheathed cable of size 2 x 1.5 SQMM copper conductor cable in PVC conduit from from junction box to street light fitting complete all as specified and directed. Make:- Crompton Cat part No LSTS-40-CDL or equivalent as per Appx 'C'.
M&L for bracket made out of GI tubing single piece not welded but bended at proper angle of size 40mm dia,light grade 1.5 mtr long including fixing with MS clamps -2 Nos made out of 50 mm wide 5mm thick flat iron with M.S nuts bolts 75 mm long 12 mm dia -4 Nos with flat washer (3mm thick) -02 No for each including painting with aluminium paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and directed.
S&F PVC Junction box of size 280 X 170 X 130 mm Cat No GS-JB-2817 Hinged (L) wiith MCB TPN 32 Amps for looping of cable for 1 Phase and 1 neutral fixed on pole with the help of MS nuts bolts and MS clamps-2 Nos of size 40 mm X 4 mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside box. work also includes making suitable hole in pole to take out connections to fitting if required at site complete all as specified and directed.
S&F PVC Junction box of size 280 X 170 X 130 mm Cat No GS-JB-2817 Hinged (L) wiith MCB TPN 32 Amps for looping of cable for 3 Phase and 1 neutral fixed on pole with the help of MS nuts bolts and MS clamps-2 Nos of size 40 mm X 4 mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside box. work also includes making suitable hole in pole to take out connections to fitting if required at sitecomplete all as specified and directed.
S&F post top lantern light fitting 1X40 Watt LED type with 360 degree indirect light with Black ABS plastic spigot, spun aluminium canopy, with opal diffuser and accessories complete all as specified and directed. MAKE:- Crompton, Model- LPTO-45-CDL/M or equivalent as per Appx 'C'.
S&F for Die cast aluminium housing with IP 65 protection LED flood light luminaires 150 watt complete all as specified and directed Make - Crompton Model No - LFLN-150-CDL or equivalent as per Appx 'C'.
S&F Cable route indicator (HT/LT) made out of cast iron suitable size supported on & including MS angle of suitable size embeded in PCC (1:4:8) type 2 with engreved size & direction of cable complete all as specified & directed .
Supply, fix, test and commissioning of lithium based integrated solar street light 15/16 W the system shall including Aluminium Housing, die cast/ Extrusion type Housing, Hi brightness LED light (120-140 luminous/W) operating voltage 11.1/12.8 volt. IP 65 compliance driver efficiency 85% to 90%, CRI > 70 CCT 5000 TO 6500K compliance toughened glass acrylic cover. MPPT base charge controller with hi-efficiency LED driver design with/without dimming function as per IEC standards. Hi-efficiency 25/30 WP Mono/poly crystalline solar panel inbuilt battery box. lithium battery, 2 days autonomy,>15 Ah. DOD 90 to 95%,40 wp solar panel complaint to MNRE specification complete along with Battery Box, including 1.sqmm 3.0 core flexible Copper cable in PVC conduits from juction box to connector of street light fitting complete all as specified and directed. Make: Crompton, Cat Part No. CSADSPI15CDL or equivalent make of Philips/BHEL/TATA BP .
M&L for GI medium grade Pole 3" dia 5 mtr height excluding planting depth for solar street light with aluminium paint over one coat of red oxide, foundation of pole with PCC 1:2:4 using 20 mm graded aggrigate of size 450 mm x 450 mm x 1000 mm deep complete all as specified and directed.
(a) Copper bus bar capacity 800 Amps for Phase-R-Y-B-3 Nos and neutral -1 No (b) MCCB Four Pole 630 Amps 50 KA- 1 No (I/C) (c) MCCB Four Pole 315 Amps 50 KA- 1 No (c) MCCB Four Pole 125 Amps 35 KA - 1 No (d) MCCB Four Pole 100 Amps 25 KA - 1 No (e) MCCB TPN 32 Amps 10 KA - 2 Nos (f) MCCB SPN 32 Amps10 KA - 3 Nos (g) MCCB TPN 63 Amps - 2 Nos (h)Timer with synchronous timer 0-24 Hrs suitable for street light control and with suitable ML 3 contactor 3Ph phase 40 Amps capacity - 01 Set
Ditto all as item No- 82.00 here in before but Digital Ameter of 0-400A with suitable size of CT ratio and voltmeter of 0-500V digital type & consisting of followings :- (FP-1)
(a) Copper bus bar capacity 400 Amps for Phase-R-Y-B-3 Nos & neutral -1 No (b) MCCB TPN 315 Amps 35 KA - 1 No (I/C) (c) MCCB TPN 200 Amps 35KA - 1 No (d) MCCB TPN 32 Amps 25 KA - 8 Nos (e) MCB SPN 32 Amps 16 KA - 3 Nos (f) Timer with synchronous timer 0-24 Hrs suitable for street light control and with suitable ML 3 contactor 3Ph phase 40 Amps capacity - 01 Set
Ditto all as item No- 82.00 here in before but Digital Ameter of 0-200A with suitable size of CT ratio and voltmeter of 0-500V digital type & consisting of followings :- (FP-2)
(a) Copper bus bar capacity 350 Amps for Phase-R-Y-B-3 Nos & neutral -1 No (b) MCCB TPN 125 Amps 35 KA - 01 No (I/C) (c) MCCB TPN 100 Amps 25 KA - 01 No (d) MCCB TPN 63 Amps 25 KA - 02 No (e) MCB SPN 32 Amps 10 KA -03 Nos (f) Timer with synchronous timer 0-24 Hrs suitable for street light control and with suitable ML 3 contactor 3Ph phase 40 Amps capacity - 01 Set
Ditto all as item No- 82.00 here in before but Digital Ameter of 0-200A with suitable size of CT ratio and voltmeter of 0-500V digital type consisting of followings :- (FP-3)
(a) Copper bus bar capacity 250 Amps for Phase-R-Y-B-3 Nos & neutral -1 No (b) MCCB TPN 100 Amps 25 KA - 01 No (I/C) (c) MCB TPN 32 Amps 10 KA - 02 Nos (d) MCB SPN 32 Amps 10 KA -03 Nos (e) Timer with synchronous timer 0-24 Hrs suitable for street light control and with suitable ML 3 contactor 3Ph phase 40 Amps capacity - 01 Set
Ditto all as item No- 82.00 here in before but Digital Ameter of 0-200A with suitable size of CT ratio and voltmeter of 0-500V digital typeconsisting of followings :- (FP-4)
(a) Copper bus bar capacity 200 Amps for Phase-R-Y-B-3 Nos & neutral -1 No (b) MCCB TPN 100 Amps 35 KA - 01 No (I/C) (c) MCCB TPN 100 Amps 25 KA - 02 Nos (d) MCCB TPN 40 Amps 25 KA - 03 Nos (e) MCB SPN 6-32 Amps 10 KA -09 Nos
Ditto all as item No- 82.00 here in before but Digital Ameter of 0-200A with suitable size of CT ratio and voltmeter of 0-500V digital type consisting of followings :- (FP-5)
(a) Copper bus bar capacity 200 Amps for Phase-R-Y-B-3 Nos & neutral -1 No (b) MCCB TPN 100 Amps 10 KA - 01 No (I/C) (c) MCCB TPN 63 Amps 25 KA - 01 No (d) MCB SPN 6-32 Amps 10 KA -11 Nos (e) Timer with synchronous timer 0-24 Hrs suitable for street light control and with suitable ML 3 contactor 3Ph phase 40 Amps capacity - 01 Set
Ditto all as item No- 82.00 here in before but Digital Ameter of 0-400A with suitable size of CT ratio and voltmeter of 0-500V digital typeconsisting of followings:- (Main Panel No-2)
(a) Copper bus bar capacity 500 Amps for Phase-R-Y-B-3 Nos & neutral -1 No (b) MCCB FP 315 Amps 50 KA - 01 No (I/C) (c) MCCB TPN 250 Amps 35 KA - 01 No (d) MCCB TPN 63 Amps 25 KA - 02 Nos (e) MCB SPN 6-32 Amps 10 KA -01 Nos
S&F of MCCB 100 Amps Four pole 50 HZs 415 volts with rupturing capacity 25 KA with enclosure complete all as specified & directed.
Ditto all as per item No. 90.00 here in before but of capacity 100 KVAR in five steps (50+25+15+5+5) complete all as specified & directed.
Design, fabrication and supply of 11 KV metering cubical made out of MS sheet steel enclosure of 2.0 mm thick with powder coating with 7032 shade suitable for outdoor type (IP 55) installation and fixed with resin cast CTs & PTs - 03 Nos each calibrated at a NABL accredited lab approved by TSSPDCL. CT specification suitable for 315 KVA transformer - 03 Nos class 0.25 Burden 5 VA PTs specification suitable for 315 KVA transformer - 03 Nos, ratio - 11000/1.732/110/1.732 V class 0.2 Burden - 10 VA, including digital/mechanical meter for reading complete all as specified and as directed.
Design, fabrication and supply of 11 KV metering cubical made out of MS sheet steel enclosure of 2.0 mm thick with powder coating with 7032 shade suitable for outdoor type (IP 55) installation and fixed with resin cast CTs & PTs - 03 Nos each calibrated at a NABL accredited lab approved by TSSPDCL. CT specification suitable for 250 KVA transformer - 03 Nos class 0.25 Burden 5 VA PTs specification suitable for 250 KVA transformer - 03 Nos, ratio - 11000/1.732/110/1.732 V class 0.2 Burden - 10 VA, including digital/mechanical meter for reading complete all as specified and as directed.
HOT WATER SUPPLY S&F storage type electric water heater closed/vented, vertical type geyser (5 star rating) material of inner container stainless steel of capacity 25 Ltrs including grouting 4 Nos nut bolts, air release valve & non return valve complete with all accessories complete all as specified & directed.
SUMMER APPLIANCES Supply, installation and testing of refrigerator not less than 195/200 Litre capacity, 230 V, 50 HZ, 5 star rating, frost free, double door with humidity control and deoderizer, toughned glass shelves, stabilizer free operation, inverter technology compressor, rust resistance body, dual thermostart for refrigerator & freezer, with cool pack, complete all as specified & directed.
Ditto all as per item No. 95.00 here in before but of capacity not less than 310 Litre complete.
S&F voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 140 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA complete all as specified and as directed.
Ditto all as per item No. 97.00 here in before but of capacity 4 KVA complete.
Supply and install desert cooler electric driven (single phase) three speed having nominal air flow capacity 5000 CFM per hour, with propeller ISI cooler fan motor copper winding single phase fitted with / having aluminium blade of minimum size 500 mm ,submersible pump, Max power consumption of 325 Watts. Cooler body made out from 20 gauge mild steel galvanized iron sheet & water tank made out of 18 SWG, having capacity 60 Ltr minimum including three louvers with wood wool pad, flexible PVC distribution pipes and 3 way junction complete all as specified & directed.
MODERN LAUNDRY Supply, install ,testing & commissioning of washing Machine to wash, dry for various types of solid linen including all connected various civil, electrical and mechanical works with and comprising automatic washing 20 kg per charge, electrical heating system, front loading, auto timed auto reversed, auto stop auto temp control , auto level control, electric operated valve for auto water inlet, auto hot water inlet/outlet, , auto drain. variable frequency drive for variable speed control. Indepandant suspension structure, advanced electric balancing technique, achieves out of balance automated load adjustment, free standing soft mount, high speed, 320G, External chemical injuction ports , Robust industrial design, Durable door safety lock and handle, Complete stainless steel construction . Load capcity-20 Kg, Drum Diameter - 658 mm, Drum Depth -438 mm.
ITEM NO. 100.00 (Cont...):- 2. Drying Tumbler, 20 kg cap per charge, electric heated, front loading type Microprocessor based digital controller,auto timed auto reversed, auto stop with fully die pressed door, inner basket stainless steel, outer double walled insulated with glass wool complete all as specified and as directed . Switch gear used with moto protection relays, single phasing, preventer, reverse phasing etc. Rinned type heaters tubler heating elements used made out of SS pipes, long life heaters double protection given through digitaltemperature controller & imported Italian thermostat, PU paint done after completer rust removal through rust removal chemicals prior to epoxy priming & knifing putty base, Size f the Basket -800 Diax600Depth * Door opening 500 MM *Sides of basket material & thickness - 1.6 mm Stainless steel, AISI 304 Quality * Inner basket - Density Perforated SS AISI304 quality used. Argon Arc welding, single and un-visible joint, 1 mm thick sheet used. * Overall Dimensions - 930 mmx1100 mm x 1780 mm (WXDXH).
CENTRAL AIR CONDITIONING Supply, Installation, Testing & Commissioning of Chilled Water type Central AC Plant of capacity 12.5 TR for Simulator Bldg comprising of following:-
WATER COOLED CHILLING MACHINES Supply,installation,testing and commissioning of not less than 12.5 TR (As per manufacture standardisation) water cooled Scroll Chilling Machines fitted with hermetically sealed compressors, multi circuit Dx chiller,water cooled S&T condenser, Microprocessor based control panel, suitable for R-407 C Refrigerant, Shell & Tube Insulated Evaporator, Expansion Device, Suitable capacity Control Mechanism actual Cooling capacity on following Operation. Parametres, desired inside conditions Temp. 22 ± 2 °C, Relative humidity 55% ± 5% complete all as specifications & following:
Chilled Water Entering Temperature : 12.17 deg C Chilled Water Leaving Temperature : 6.67 deg C Evaporator Fouling Factor : 0.0001 MKS Condenser Water Entering/Leaving Temperature at 36.2/32.4 deg C Refrigerant : R-407 C Maximum Allowable IKW / TR @ 100% Load : 1.55
Scope of Supply (a) 1set.- Scroll compressor hermetic complete with suaitble capacity squirell cage induction motor with class 'F' insulation suitable for operation on 415+ 10% volts, 50Hz, A.C. supply and automatic capacity control, safety switches, forced feed lubrication system etc. as per specifications. (b) 1No. Close transition type automatic star-delta starter suitable for compressor motor complete with ammeter with CTs, over load protection, under voltage protection, protection against phase reversal & independent single phase preventors etc. complete as required. (c ) 1 Set - Lubrication device consisting of automatic electric oil pump, oil cooler, oil strainer,automatic pressure regulating valve, oil heater, oil heater thermal switch etc. as per specifications. (d) 1 Set. - Matching Water Cooled condenser having Copper tube with Mechanically bonded aluminium fins. (e) 1No. - Matching DX type chiller for Chiller units (f) 1 Lot- Refrigerant piping fittings, valves and accessories to interconnect compressor, condenser, chiller and expansion valve. (g) 1 Set- Microprocessor based control panel complete with all safeties, controls and LCD display as per specifications. (h) Lot- Refrigerant line accessories comprising of safety valves, angle valve, liquid line indications. (j) Lot- Water flow switches at inlet and outlet of chiller. Water drain and air purge valves whenever required. (k) Lot- Suction line and chiller insulation with minimum 19mm thick polyvinyl nitril rubber insulation complete as required. (l) Lot- Frame work for mounting the above condenser, chiller compressor and motor with base plate complete with anti vibration pads/springs. (m) Lot- Initial / first charge of refrigerant gas and compressor oil. (n) Lot-PCC cement concrete foundation for the Chiller unit
Chilled Water Pump Set Supply, erection, testing and commissioning of centrifugal mono block type chilled water pump set capable of delivering 250 LPM of water against 30 mtr head each comprising of the following and complete as per specifications.
(a) 1 No.- mono block type pump (b) 1 No. - Suitable HP TEFC squirell cage induction motor with class 'F' insulation 2900 rpm synchronous speed, operating on 415+ 10% volts, 3 phase, 50 Hz A.C. supply. (c) Lot- insulation of pump of 13 mm thick with aluminium foil faced closed cell chemically crossed linked XPE foam material. (d) 2 Nos. -100 mm dia dial type pressure gauges. (e) Lot- Mounting frame with Anti vibration pads. (f) Lot-PCC cement concrete foundation for the pump unit (1 working simultaneously & 1 working standby Each of 100% cap)
Condenser Water Pump Set Supply, erection, testing and commissioning of centrifugal mono block Condenser water pump set capable of delivering 350 LPM of water against 20.00 mtr head each comprising of the following and complete as per specifications:
(a) 1 No.- mono block type pump (b) 1 No. - Suitable HP TEFC squirell cage induction motor with class 'F' insulation 2900 rpm synchronous speed, operating on 415+ 10% volts, 3 phase, 50 Hz A.C. supply. (c) 2 Nos. -100 mm dia dial type pressure gauges. (d) Lot- Mounting frame with Anti vibration pads. (e) Lot-PCC cement concrete foundation for the pump unit (1 working simultaneously & 1 standby---Each of 100% cap)
Hot Water Pump Set Supply, erection, testing and commissioning of centrifugal mono block type Hot water lifting pump set capable of delivering 100 LPM of water against 30 mtr head each comprising of the following and complete as per specifications.
(a) 1 No.- mono block type pump (b) 1 No. - Suitable HP TEFC squirell cage induction motor with class 'F' insulation 2900 rpm synchronous speed, operating on 415+ 10% volts, 3 phase, 50 Hz A.C. supply. (c) Lot- insulation of pump of 13 mm thick with aluminium foil faced closed cell chemically crossed linked XPE foam material. (d) 2 Nos. -100 mm dia dial type pressure gauges. (e) Lot- Mounting frame with Anti vibration pads. (e) Lot-PCC cement concrete foundation for the pump unit (1 working simultaneously & 1 standby Each of 100% cap)
Heating Kit Supply, erection, testing and commissioning of heating arrangement for winter heating and monsoon re - heating comprising of Electric Hot Water Generator of 24 KW capacity for winter heating and for monsoon reheating complete with controls and accessoiries as per specifications.
Supply, Installation, testing and commissioning of Pan type Humidifier of cap 6 KW made of SS sheet with controls to maintain humidity within 55 % ± 5 complete with all accessories & controls
Air handling units Supply, Installation, testing and Commissioning of double skin floor mounted 4 Rows Deep Coil of nominal capacity 10000 CFM Air handling units fabricated & assembled complete, made of 25 mm thick panels consisting of GI casing of thickness 0.6mm outside layer and 0.6mm inside layer, injected at factory by moulding machine with polyurethane foam (PUF) insulation complete with blower section and filter section with filter of 10 micron at 90% efficiency, chilled water coil constructed out of copper tubes not less than 0.5mm thickness and aluminum fins, Suitable capacity TEFC drive squirrel cage induction motor 415 ± 10% volts, centrifugal forward / backward curved fan suitable for 40 mm SP, access door etc. complete as per std. specification. Maximum face velocity across the coil shall be 500 FPM and each 6 Row deep Chilled Water Cooling Coil and 2 Row Deep Hot Water Coil, RH to be maintained at 55 %± 5 of following capacities and comprising of :-
(a) Coil of copper tube and aluminium construction sized at maximum face velocity of 500 FPM. (b) Pre filter of of 10 micron at 90% efficiency on the face of the coil in return air stream. (c ) Squirrel cage induction motors suitable for 415 ± 10% volts, 50 Hz, AC supply meeting criterion as per ASHRAE standard 90.1-2007 and high efficiency. (d) Fan belt drive package (e) Vibration isolators. (f) Fan outlet velocity not exceeding 10 mps. Tag No. Space CFM TR AHU Simulator Bldgs 10000 25.0
Cooling tower Supply, Installation, testing and commissioning of FRP cooling tower of minimum 30 TR heat rejection capacity with FRP water basin PVC fillings with integral louvers and drift eliminators complete with hot water basin either fitted with spray nozzles or having self rotating sprinklers, statically & dynamically balanced axial flow type fan direct driven or driven through reduction gear box with TEFC induction motor , suction screen, make up quick filling arrangement, over flow and drain connections with necessary valves and suitable inspection ladder, access arrangement for cooling lower interior, installed on MS girders (MS-I sections) fixed in masonry foundations with cement concrete footing, second class brick work and cement mortor1:6; all accessories, basin fittings, fan, fan motor suitable for 415 Volt supporting structure, anti vibration mountings etc. complete and 50 HZ power supply having isolator panel with MCB at cooling tower and with following technical data. (a) Water flow/tower 120 USGPM (b) Ent. Water Temp. 97 °F (c) Basin water Temp. 90 ˚F
MOTOR CONTROL PANEL FOR AC PLANT Supply, fixing, testing and commissioning cubicle type MV panel consisting of the 3 phase, 415 volt, 35 MVA rupturing capacity made of 2 mm thick CRCA sheet powder coated conforming to IP-54, including interconnection wiring, indicating lamps etc. The cubicle panel shall be free floor standing type, complete with interlocking arrangement & earth bus. The panel shall have compartmentalized arrangement to accommodate one feeder in each compartment. A vertical cable alley of suitable width shall be provided to serve one or two vertical feeder sections. Also the openings between the busbar chamber and the feeder section shall be shrouded with Bakelite/hylam sheet with minimum 3 mm thickness. All the hardware used in fabrication of panel shall be galvanized with zinc passiveness.
ELECTRICAL CABLES Supplying and laying in ground/ in ducts/in pipes/on cable trays of following PVC insulated aluminum/copper conductor armoured cables of 1.1 KV grade confirming to IS complete with cable tray, clamps, saddles etc, including effecting proper connection to the equipment all as required and specified:-
3.5 Core x 70 Sq.mm (aluminum) for Chillers & Hot Water Generator and APFC Panels.
3 Core x 6 Sq.mm (copper ) for Chilled Water , Condenser pumps, hot water pumps , CT Fan & AHU Blowers motor
4 Core x 4 Sq.mm (copper) For Controls & FCU motors in PVC conduit
4 Core x 2.5 Sq.mm (copper) For Controls & FCU motors in PVC conduit
EARTHING Supply & fixing/laying GI earth strip 25 mm x 3 mm below ground, in 40 mm GI pipe wherever required and on surface or in recess for connections etc.
Supply & Fixing of 8 SWG wire of copper with copper lugs.
PIPING Supply, laying/fixing, testing and commissioning the following nominal sizes of chilled water & hot water plumbing pipes MS ‘C’ CLASS as per IS: 1239, inside the building(with necessary clamps, vibration isolators and fitting like valves, flanges, union etc. but excluding valves, strainers, gauges etc.) cut to required lengths and welded at joints and inclusive of accessories like elbows, tees, reducers, sockets etc. including insulating with 15 mm (for all pipes) and 13mm (for drain pipe) thick closed cell chemically cross linked fire retardant polyethylene foam insulation of density 36 Kg/cum. The thermal conductivity of the material should not exceed 0.035 W/Mk at an average temp of 40 deg C,covered with clading 0.5mm aluminium sheet complete with application with rubber based adhesive Pidilite SR 998 and 50mm x 3 mm thick self adhesive tape on both longitudinal & transverse joints simultaneously, all as specified and repairing damage to building etc.and conforming to the specified specification:
80 mm dia
65 mm dia
50 mm dia
25 mm dia
Supply, installation, testing and commissioning of following Butterfly valves
80 mm dia
65 mm dia
50 mm dia
Supply, installation, testing and commissioning of following Balancing valves
80 mm dia
65 mm dia
50 mm dia
Supply, installation, testing and commissioning of following ‘Y’ Strainers
80 mm dia
65 mm dia
50 mm dia
Supply, installation, testing and commissioning of following ‘Check Valves'
80 mm dia
65 mm dia
50 mm dia
Supply,installation,testing and commissioning of 25 mm dia Ball valves for drain with fittings etc.
Supplying, installation, testing and commissioning of Auto air vents. 15 mm dia
Providing and fixing in position the Digital thermometers wall mounting type complete.
Providing and fixing in position the industrial type pressure gauges
Providing and fixing in position the mercury-in- glass industrial type thermometers complete with fitttings.
Providing and fixing in position the water flow switches as per drawings and specifications for the Chilled water circuit complete with fitttings
Supply,installation,testing and commissioning of 3 way mixing/ diverting valve of size 65 mm dia with proportional cooling only thermostats for the Air Handling Units complete with required controls wiring/installation kit etc. As per drawings and specifications.
Supply, fixing, testing and commissioning of condenser water pipes of MS class ‘C’ of following sizes and material along with necessary clamps, vibration isolators and fittings such as bends, tees etc but excluding strainer and gauges etc adequately supported on rigid supports/buried in ground including excavation & return filling etc as per specifications and as required
80 mm dia
65 mm dia
50 mm dia
Expansion Tank Supply,installation,testing and commissioning of HDPE expansion tank of size 500 Ltr complete with suitable insulation with FR- XLPE/XPE 13 mm thick of minimum bulk density 28±4Kg/cum covered with vapour barrier and finished with 0.5 mm thick AI cladding and applied with Pidilite SR 998 complete with air vent and drain connection with float valve, quick fill and control valves etc. as required.
Make Up Tank Supply,installation,testing and commissioning of HDPE make up tank of size 3000 Ltr. complete with air vent and drain connection & overflow, make up connection with float valve & foundation etc. complete. .
AIR DISTRIBUTION M&L for GI sheet metal ducts made of GI sheet of Class -VIII as per IS -277 of following thickness for supply air ducting as per IS - 655 and as required by the specifications.
24 gauge galvanised sheet steel
22 gauge galvanised sheet steel
20 gauge galvanised sheet steel
Supply, fabrication, installation and testing the flexible connections constructed of fire resistant double resin sleeve as per the approved shop drawings.
Grilles/Diffusers Supplying, fixing, testing and commissioning of powder coated extruded aluminium section supply air grill/ diffuser with powder coated paint and with volume control dampers complete as required.
Return air grill/ diffuser Supplying, fixing, testing and commissioning of powder coated extruded aluminium section return air grill/ diffuser with powder coated paint and without volume control dampers complete as required.
Fresh Air Grilles Supplying, fixing, testing and commissioning of powder coated extruded aluminium section fresh air grill in weather maker room with volume control dampers, bird screen etc complete as required.
Supply, installation, testing and commissioning of motorised combined fire damper complete with control panel, inter connecting wiring at locations shown in approved shop drawings and as per specifications.
Fire Dampers.
Actuators
Control Panel & Wiring
THERMAL INSULATION Supply install test and commissioning of acoustic insulation of duct as per approved drawing with 25 mm resin bonded fibre glass, of 48 kg/cum density, covered with and 28 G Aluminium sheet all as specified.
Supply install test and commissioning of thermal insulation of duct as approved drawing with 13 mm thick faced close cell XPE foam insultion including 0.5 mm aluminium foil all as specified.
ARBORICULTURE Supply & plantation of ASHOKA with saplings of 1.2 to 1.5 mtr hight including excavation of suitable size pit (size of pit shall not less than 75 cm dia & 75-80 cm deep) to accomodate the roots of plants including provision of good earth by treating with farm yard manure in the ratio (4:1), fertilizers and pesticides (i.e Bevation and neem cake BHC 10% linson dust. Thimment or phorate,manures super and vermicompost) and making up the trench area to proper levels, for its growth and maintaining by regular watering and weeding etc and maintaining for one year from the certified date of completion of the work complete all as specified & directed.
Ditto all as per item No 137.00 here in before but NEEM.
Ditto all as per item No 137.00 here in before but SHISHAM.
Ditto all as per item No 137.00 here in before but IMLI
Ditto all as per item No 137.00 here in before but JAMUN
NOTE FOR ITEM NO. 137.00 to 141.00 (i) Height of plant shall be measured from top of follage ( not from the isolated branch/leaf,main stem) to 150mm from top of root. (ii) Water will not be supplied by MES. Contractor has to make his own arrangement for watering to plants and grass. (iii) The rates quoted by the contractor deemed to include watering, maintenance of plants till 2 years after certified date of completion of work. (iv) During 2 years after completion if any plant is found dead, or not of satisfactory growth, plants of approved size and shape shall be provided without any extra cost to the state. Simillarly the grass shall also be replanted without any extra cost if no desired growth is achieved during the period of 2 years. (v) Supply and application of manure, sweet earth and pesticides, fertilizers, etc up to 2 years after completion are deemed to be included in the quoted unit rate. (vi) Tenderer to note that 20% cost of quotation against these items shall be retaied for 2 years after completion.In case of failure by the contractor to maintain the plants as above, the same shall be carried out by the department at his Risk and Cost and the expenditure shall be deducted from this retained amount. (vii) The plants shall be brought at site Six months before the date of completion of the work as per Work order.
PROVISIONAL LUMP SUM (PLS) Provide Provisional lump sum for (a) Construction of PARADE GROUND-1 No (b) Construction of FOOTBALL-1 No (c) Construction of BASKET BALL GROUND-2 Nos (d) Construction of VOLLEY BALL GROUND- 2 Nos (e ) Construction of HOCKEY GROUND- 1 No (f) Construction of Hardstanding 120 Sqm (g) Construction of Recharge pit of sizes 1.2m x 3.0m deep- 2 Nos, 2.4m x 3.0m deep- 4 Nos, 5.0m x 3.0m deep- 2 Nos (for rain water harvesting) (h) Provision of RCC covered beam for vertical rope and open horizontal rope with 8 feet and 9 feet ditch.
NOTE FOR ITEM NO 142.00 : - 1) Provisional lump sum shall be expended wholly or in parts as directed by GE. The works under Provisional Lump Sum shall be measured and paid for at applicable rates in MES SSR 2010 Part-II subject to percentage ( + or - denomination) computed under last colummn of this schedule above/below the provisional lump sum price worked out by the MES. 2) For details refer relavent TD drawings.
FRIZO INDIA PVT LTD
DHARIWAL TRADERS PRIVATE LIMITED
RAGHUSONS INFRA ENGINEERING PVT. LTD
MANGLA AMIT BUILDERS PVT LTD
Offshore Infrastructures Ltd
KHETA RAM RAGHUNATH RAM CONST CO PVT LTD
ENGINEER CONSTRUCTION PVT. LTD.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid