SPL REPAIR TO BLDG NO 3 AT CARIAPPA ROAD UNDER GE AMRITSAR

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft and hard soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in loose/soft soil.

Removing excavated material soils, not exc 50m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.

Material and Labour for hard core of gauge not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Demolition of brick works in cement mortar including disposal of unserviceable material debris and rubbish complete all as specified and directed.

Taking down Chowkhat or frame not exc 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkhat or frame not exc 4 Sqm and exc 1.5 each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Material and Labour for plain cement concrete (1:4:8) type B2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Material and Labour for Brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Material and labour for 15mm thick cement plaster in CM (1:6) on other than fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc. complete all as specified

Material and labour for 15mm thick cement plaster in CM (1:4) on other than fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc. complete all as specified

Material and labour for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified

Material and labour for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new workcomplete all as specified

Supply and fixing Coloured/printed non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10 mm thick screed bed over bedding layers in CM 1:4. complete all as specified and directed.

Supply and fixing Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed over bedding layers in CM 1:4. complete all as specified and directed.

Supply and fixing Coloured/printed glazed ceramic tiles 450 x 350x7mm to 8 mm thick (Square/rectangular) in vertical surfaces(skirting/dado) including 10mm thick cement plaster in CM 1:4 complete all as specified and directed.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-inCharge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supplying and fixing factory made uPVG white colour Sliding window Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludescost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

supply and fixing 25 mm dia stainless steel Curtain rods/ rails, with brackets, stops, rollers,finials, 1pair of decorative knobs for each curtain rod etc. complete all as specified.

supply and fixing vitreous china wash hand basin with pedestal white of size 420x420 mm flat back including bracket, of,Pedestal white, (half or full Threaded) bore dia of discharge pipe 32 mm wt 45 gms and PVC waste pipe with cup complete all as directed or as specified.

supply and fixing vitreous china wash done water closet pedestal pattern pan (coupled closet) white /coloured including vitreous china flushing cystern flush pipe seat, cover cistern cover complete set one pieces as required and specified and directed.

supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

supply and fixing CP Jetspray suitable for EWC complete all as specified and directed.

supply and fixing glass shelve assembly 60cm in oval shape consisting 5.5 mm to 8mm thick glass including CP guard railing with double rail complete all as specified and directed.

supply and fixing PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

supply and fixing Brass chromium plated Pillar mixer with bend pipe suitable for mixing Hot & Cold water and making leakage free connection with wall tiles & GI pipes complete all as specified and directed.

supply and fixing Brass chromium plated Wall mixer with bend pipe suitable for mixing Hot & Cold water and making leakage free connection with wall tiles & GI pipes complete all as specified and directed.

Supplying and fixing rotational moulded polythelene water storage tanks(multi layer) capacity 1000 litres(cylindrical vertical with closed top), with and including 20mm dia PTMT ball valve with epoxy coated aluminium rod ( minimum weight 210gms ) hoisted, fixed in position and making connection & High density plastic ball screwed for Iron pipe and fixed to GI Pipe on 20 mm bore all as specified and as directed.

supply and fixing 20mm bore,Gunmetal globe or gate valves, with iron wheel head, screwed both ends for iron pipes and fixed.all as specified and as directed.

supply and fixing 15 mm bore tubes (medium grade) galvanized with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.

supply and fixing 20 mm bore tubes (medium grade) galvanized with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.

supply and fixing 15 mm bore fancy type Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete.

supply and fixing 15 mm bore fancy type angle cock/ stopcock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete all as specified and directed.

supply and fixing PVC waste pipe 32 mm dia fixed to WHB/Urinals complete all as specified and directed.

supply and fixing 100 mm dia CP grating with or without hole type complete all as specified and directed.

supply and fixing in repairs CP brass towel rail of 20mm dia and 600 mm long complete all as specified and directed.

supply and fixing in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.

supply and fixing 110 mm bore PVC(SWR) pipes single socketed in any length fixed to walls with nut and bolt and clamps at every 2mtr length including all fittings complete all as specified and directed

supply and fixing 110 mm bore PVC/SWR bends any radius With access door complete all as specified and directed.

Material and Labour for Providing and fixing Gypsum board 12 mm thick Seamless calcum silicate in ceiling made out of 1800x1200 sizenboard of siliceous and calcareous material reinforced with fixed with screw, GI frame work for seamless ceiling comprising ofGI perimeter channel 0.55mm thick with two unequal flanges of 20 and30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws as 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting dips across the intermediate channel at 457mm centre to centre and as per manufacturer’s instructions incl preparation of new surfaces & applying two coat of OBD on ceiling over chalk whitening complete all as specified and directed.

supply and fixing in repairs 25mm dia stainlesssteel Curtain rods/rails, with brackets,stops,rollers,finials,1 pair of decorative knobs for each curtain rod etc. complete all as specified and directed.

Material and Labour for Cement concrete type C-2, 1:3:6 using 40 mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed.

supply and fixing Steel work in tubular trusses including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to I.S1161-1979 grade St. 240 complete all as specified and directed.

supply and fixing Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and Labour for preparation of untreated steel/ iron surfaces of any description , over 10 cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over and incl one coat of red oxide primer complete all as specified and directed.

M&L for point wiring for One light point/Fan point controlled by one switch/regulator complete with 1.5 sqmm single core PVC insulated unsheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.2 mm thick of suitable modules, concealed in walls with modular white plated cover 3mm thick as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed for the following:- NOTE: (i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates. (ii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item.

All as per ser item No 47 above but for One 3 pin 5 Amps socket outlet on independent board.

All as per ser item No 47 here in above but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.

Supply and fixing modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed

Supply and fixing modular switch 1 way 16A, 240 volts, 1 module complete all as specified and directed

Supply and fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed

Supply and fixing modular socket, 6A/16A, 240 volts, 2/3 pin combined 2 module flush type all as specified and directed

Supply and fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified

M&L for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 4 way, 240 volts grade with 200 Amps insulated rated bus bar, earth bar IP- 43 & IK-09, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete all as directed

Supply and fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing and commissioning including taking down old unsv one from the site complete all as directed

All as per ser item 56 above but for MCB SPN 32 Amps

Supply and fixing sub main wiring with 2 runs of 4 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 4 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly including taking down old unsv one from site complete all as directed NOTE: Two runs of 4 sqmm copper cable and one run of 4 sq mm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length

Supply and fixing air circular fans 230 volts, single phase 450mm sweep of make: Crompton or equivalent make of Havells/Orient suitable for wall mounting PVC body and blade including pull cords for speed regulation & wide oscillation control, with 1300 RPM, 60 air delivery, 50 Watt, colour as per the direction of Engr-in-Charge complete all as specified and directed

Supply, install & testing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 250mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose to exhaust fan and writing MES No. including cutting hole suitable for fixing exhaust fan complete all as specified and directed Make: Havells or equivalent in Orient/Crompton

Supply and fixing PLUTO NEO LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make: Havells or equivalent in Philips/Crompton

Supply and fixing COMET ROUND Slim surface mounted round shape 15 watt 220 volts AC, 6000K recessed type LED luminaire, die-cast aluminium body with specular finish aluminium reflector of fixture size 107x78mm and ceiling cut out of 92mm dia with IP-20 protection with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells or equivalent in Philips/Crompton

Supply and fixing Wall mounted, indoor, Mirror Light LED as approved by GE with aluminium die cast, suitable for and including 10 watt 6000K, WH LED light, prewired incl connecting up complete all as specified and directed.

Supply and fixing storage electric heater (Geyser), flexible mounting of capacity 25 ltrs, single phase, 240 volts, AC, white colour, with incoloy heating element and PUF insulation, ISI marked BEE 5 star rated complete with high precision & externally adustable capillary thermostat for temp regulation, backup safety overheating capillary therrmal cut out at 95ºC, temperature display, etc., including provn of suitable holding clamp, MS bolts, grouted to wall and connecting up including 3 core sheathed multi-stranded flexible copper conductor cable connected with 15/16 Amp plug top and provn of water connections with new PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers union, NRV of suitable size, check/end nuts with washers, 15mm dia 100mm long nipples (02 Nos) for hot water and cold water connections and making good to the disturbed surface in cement morter as required and testing complete all as directed NOTE: Cost of flexible copper cable of 3 core, PVC steel braided inlet/outlet pipe of 15mm dia, 450mm long with brass union, NRV, check/end nuts, nipples, MS bolts, etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of geyser will be deemed to be included in the quoted rate

S S CONSTRUCTION COMPANY (BID ID -3222826)

Ghuman Builders (BID ID -3222829)

RAJ KAMAL BUILDERS (BID ID -3222662)

m/s inder construction co (BID ID -3222836)