REPAIR REPLACEMENT OF PLUMBING OVERHEAD SANITARY FITTINGS AND CERTAIN BR MAINT WORK AND REPAIRS REPALCEMENT OF OLD VINTAGE BLDG WIRING AND CONNECTED ITEMS AT VARIOUS LOC OF MIL STN KALUCHAK UNDER GE KALUCHAK

Amount

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of any size cast iron or reinforced concrete drain pipe, jointed in cement mortar, fixed withj wall and taking out of trenches, if required complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

Dismantling of water tank exc. 250 Litre but not exc. 500 Litre capacity complete all as specified and directed.

Dismantling of water tank exc. 500 Litre but not exc. 1000 Litre capacity complete all as specified and directed.

M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in sunken, filling and mass concrete complete all as specified and directed.

M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:4 complete all as specified and directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, lintels, shelves etc, and cutting chases for concealed water tubing or concealed conduit wiring etc, and making good on brick walls, cutting not exc. 20 cm in girth complete all as specified and directed.

S & F of solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F of 30 mm thick (style thickness) factory made solid panel PVC shutter consisting of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheets beading and joined together with solvent cement as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.

S & F of 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S & F of 125 mm long anodised aluminium handle, cast type complete all as specified and directed.

S & F of 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F in repair mortice lock, vertical type, size 75 mm complete all as specified and directed.

M & L for 100 mm thick cement concrete 1:2:4 type D-2, using 40 mm graded stone aggregate as laid in alternate bays finished the surface even and fair without using extra cement complete all as specified and directed.

M & L for 15 to 18 mm thick granite (of any type and shade) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including necessary cutting, grinding, rubbing, polishing rounding to exposed edges and laid over20 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough complete all as specified and directed.

M & L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick ,on ventical surface as in skriting , dado set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - RENDERING SHALL BE MEASURED AND PAID SEPARATELY.

M & L Non - skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - SCREED SHALL BE MEASURED AND PAID SEPARATELY.

M & L Non - skid joint free ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. NOTE: - SCREED SHALL BE MEASURED AND PAID SEPARATELY.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces with cement mortar 1:6 finished even and smooth (without using extra cement)complete all as specified and directed.

M & L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / metal frames, glazed with oil putty or fixed with beads including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete all as specified and directed.

S & F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed with beads in square not exc. 0.5 sqm in each pane complete all as specified and directed.

M & L for preparing newly plastered or previously untreated wall surfaces and applying two coat of oil bound distemper over a coat of 1 mm thick birla wall care putty complete all as specified and directed. NOTE:-The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this items.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes by using bleaching powder, hoisting if required, reconnecting and re-fixing in position of capacity exc. 250 & n. exc. 500 ltr, making good for running of water from tank to inside of bldgs and writing of date of cleaning and due on by synthetic enamel paint on water tank, complete all as specified & directed. NOTE :- Cost of bleaching powder shall be deemed included in the quoted rate of this item.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes by using bleaching powder, hoisting if required, reconnecting and re-fixing in position of capacity exc. 500 & n. exc. 1000 ltr, making good for running of water from tank to inside of bldgs and writing of date of cleaning and due on by synthetic enamel paint on water tank, complete all as specified & directed. NOTE :- Cost of bleaching powder shall be deemed included in the quoted rate of this item.

Dismantling of pre cast RCC water tank exc. 250 Litre but not exc.500 Litre capacity complete all as specified and directed.

S & F of 1000 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S & F in repair plastic water tank cover approx 800 gms wt for 500/1000 Ltrs water storage tank triple layered cylindrical vertical closed top hoisted and fixed in position complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connection, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connection, including cleaning for refixing or removal to store complete all as specified and directed.

Fixing only 15 mm bore old steel water tubing and connection in new or old position to wall and ceiling or laid in floors jointing and testing of old retrieved serviceable galvanized mild steel water tubing with and including all fitting (such as bends, elbows, tees, short pieces, connectors, back nuts, deminishing pieces caps, plugs and union etc) complete all as specified and directed. NOTE: - OLD STEEL WATER TUBING OBTAINED FROM DISMANTLING SHALL BE USED UNDER THIS ITEM.

Fixing only 20 mm bore old steel water tubing and connection in new or old position to wall and ceiling or laid in floors jointing and testing of old retrieved serviceable galvanized mild steel water tubing with and including all fitting (such as bends, elbows, tees, short pieces, connectors, back nuts, deminishing pieces caps, plugs and union etc) complete all as specified and directed. NOTE: - OLD STEEL WATER TUBING OBTAINED FROM DISMANTLING SHALL BE USED UNDER THIS ITEM.

S&F 15mm nominal bore of pipe in walls, and ceiling or laid in floors, jointing and testing galvanised mild steel water tubing “medium grade” with and including all fitting (such as bends, elbows, tees, short pieces connectors, back nuts, diminishing pieces, capas, plugs and union etc) complete all as specified and directed.

S&F 20 mm nominal bore of pipe in walls, and ceiling or laid in floors, jointing and testing galvanised mild steel water tubing “medium grade” with and including all fitting (such as bends, elbows, tees, short pieces connectors, back nuts, diminishing pieces, capas, plugs and union etc) complete all as specified and directed.

S & F in repair 15 mm bore chromium plated,fancy type bib tap, cast copper alloy with capstan heads, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair fancy type angular stop cock with flange, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, externally threaded, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and directed.

S&F Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-90gms/20mm- 125gms). complete all as specified and directed.

S & F of 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F in repair 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F in repairs 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F in repairs 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F of 125 mm dia grating doom with waste hole of PTMT (minimum weight 40 gram) complete all as specified and directed.

S & F of chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union size 125 mm complete all as specified and directed.

S & F in repair 20 mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.

S & F repair soap dish brass chromium plated, fancy type fixed to wall rawl plugs and chromium plated brass screws complete all as specified and directed.

S&F glass corner shelf (03 piecs) with bracket fixed with chromium plated brass screws fix to wall with rawl plug and CP screws complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F 15 mm bore angle stop valve cast copper alloy,CP with capstan heads, fancy type any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S & F 20 mm bore gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F of 15 mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shank and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repair brass CP mixer for mixing hot & cold water screwed down for 15 mm dia bore GI pipe complete all as specified and directed.

S&F of toilet paper holder with flap, brass chromium plated, complete all as specified & directed .

S & F in repair 15 mm bore bib tap CP two way with hand shower(Heath faucet, ABS chromium plated) with 8 mm dia, 1 meter long flexible tube & wall hook complete all as specified and directed.

S&F of sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 405mm x 355mm x 178mm complete all as specified and directed.

S&F of stainless steel plate rack of size 900x750x250mm made out of AISI 304 stainless steel 0.63 mm thick having partitions as per sample kept in AGE office including brass/stainless steel screws for fixing of partitions, nuts, bolts, washers and fittings, complete all as specified & directed.

S & F in repairs water closet vitreous china squatting pan ‘Orrisa’ pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, anti-syphonic pipe etc. with and including setting the trap and pan in lime concrete bedding (one lime, two sand or surkhi and 5 aggregate) minimum 150 mm thick alround and finished just below level of rim of pan to receive the floor finishes complete including making good floor complete all as specified and directed.

S & F in repair vitreous china wash down water closet pan (Pedestal pattern) and trap (excluding) fixing bolts,flushing cistern and flush pipe including connection to drain (or outgoing pipe) including plastic seat cover suitable for water closet pedestal pan, coloured closed pattern with flat bottom and cover and mid steel chromium plated or aluminium hinges devices with and including brass chromium plated standard quality jet with nozzle 1500 mm long PVC pipe etc complete all as specified and directed complete all as specified and directed.

S & F of vitreous china, wash hand basin, flat back, white of size 550mmx450mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified & directed

S & F of vitreous china, wash hand basin, flat back, white of size 580mmx450mm including brackets,including pedastal 32 mm waste pipe brass CP waste coupling 32mm dia with long screwed shank and fly nuts, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified & directed

S & F of viterous china urinal, half stall type, white with grating and union for discharge pipe, complete including providing and fixing plugs, beding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, with flush pipe, waste coupling and urinal spreader, fixed in repairs, complete all as specified & directed.

S & F in repair polymer white (polypropylene Delrin and ABS) low level flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, flush pipe, brass screws, handle etc complete having BIS description mark with IS: 7231 with and including 32 mm bore PVC flush pipe of suitable length complete all as specified and directed.

S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F Vitreous china single piece wash down water closet of size 710mm x 375mm x 660mm, white or coloured with soft close seat cover, ‘P’ or ‘S’ trap, fixing accessories and twin flush fittings including making connections to trap and to flush pipe, and making good to floors, fixed in repairs, complete all as specified & directed.

S&F of PVC cabinet made of ABS material of size 450x600mm with glass front, fixed in repairs, complete all as specified & directed

S&F of brass CP waste coupling 32mm dia with long screwed shank and fly nuts for kitchen sink (half or full threaded), fixed in repairs, complete all as specifed & directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to wall /floor complete all as specified and directed.

S & F of 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S & F PVC waste pipe flexible type 32 mm dia suitable for coupling 32 mm 750 mm long complete all as specified and directed.

S & F in repair 40mm dia PVC waste pipe for kitchen sink, 90cm long, flexiable type, fixed in repairs, complete all as specified & directed.

M&L for water proofing treatment to sunken portion with 15mm thick rendering in cement mortar 1:3 using integral water prooofing compound both on floor and walls including preparation of surface by making free from all loose particles, surface cured and allowed to dry, apply a coat of Moisture Cured High Tensile Elastomeric Modified Poly Urethane based liquid membrance coating as per manufacturers instructions both on floor as well on walls, sunken slab shall be laid to a slope of 1:40 outwards with 25mm dia PVC pipe spout projecting at least 45mm beyond out face of wall, complete all as specified & directed. Notes : a) PVC spout 25mm dia, PCC 1:4:8 type D2 and WC / EWC shall be measured and paid for separately under respective items. b) Ponding shall be done in sunken portion area by filling water which shall be kept there for one week. In case a slightest indication of seepage /leakage is noticed, the same shall be rectifird by grounting the effected area at no extra cost. Thereafter, ponding shall be repeated till there is no indication of seepage/leakage. The arrangements of ponding to be included in quoted rates and nothing shall be admissible on this account.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

Taking down carefully unserviceable main switches, DBs including MCBs etc. complete of any size and capacity complete all as specified and directed.

Taking down electronic / electric meter single phas any size or type from the existing site and refixing the same at same place after carrying out necessary repair work and making the surface good to match with existing surface with proper concealed connections on the same and testing after complete of reading complete all as specified and directed

M&L for point wiring one light / fan/ bell/Exhaust fan point controlled by one way switch(concealed type) complete with multi stranded copper conductor flame retardant low smoke (FRLS) 1.5 Sqmm size PVC insulated unsheathed cable 1100 volts grade drawn through with and incl medium grade duty concealed PVC conduit ISI marked not less than 20mm dia including conduit fittings and accessories such as socket,elbow,junction box, bell mouth,bend, reducer etc complete incl cutting chases in existing walls of any description built in cement mortar and making good the disturbed surfaces in cement mortar (1:4) and finishing the surfaces to match with existing surfaces and finish with using sunken type pressed steel terminal boxes of required sizes of not less than 1.6 mm thick factory made and factory painted with top cover of 3 mm thick plastic laminated sheet fixed with brass screws washers with all accessories including single core multi stranded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable green in colour as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified . NOTE :-Wire/Cable colour coding Shall be maintained properly as per IE rule.

All as per item No 79 but for one 3/5 pin socket outlet 5 Amps on the same board with other switches.

All as per item No 79 but for one 3/5 pin 5 Amp socket outlet on independent board.

All as per item No 79 above here in before but with 4.0 Sqmm (nominal area) cable PVC insulated but unsheathed for the 15 Amp 3/5 pin socket power point including 2.5 Sqmm copper conductor green in colour for earth continuity on independent board complete all as specified and directed.

M&L for point wiring one light / fan/ bell/Exhaust fan point controlled by one way switch(concealed type) complete with multi stranded copper conductor flame retardant low smoke (FRLS) 1.5 Sqmm size PVC insulated unsheathed cable 1100 volts grade drawn through with and including PVC casing and caping 'ISI marked' of 20/30mm size as required, terminated in MS sunken box suitable for housing of switches, socket, regulator etc covered with 3 mm thick plastic laminated sheet fixed with brass screws washers with all accessories including single core multi stranded copper conductor 1.5 Sqmm size PVC insulated unsheathed cable green in colour as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified . NOTE :-Wire/Cable colour coding Shall be maintained properly as per IE rule.

All as per item No 83 but for one 3/5 pin socket outlet 5 Amps on the same board with other switches.

All as per item No 83 but for one 3/5 pin 5 Amp socket outlet on independent board.

All as per item No 83 above here in before but with 4.0 Sqmm (nominal area) cable PVC insulated but unsheathed for the 15 Amp 3/5 pin socket power point including 2.5 Sqmm copper conductor green in colour for earth continuity on independent board complete all as specified and directed.

S&F switch piano flush type polycarbonate single pole one way 5 Amps complete all as specified and directed.

S&F in repair switch piano flush type polycarbonate single pole one way 15 Amps complete all as specified and directed.

S&F socket outlet polycarbonate 2 in 1, 3 pin 5 Amps flush type complete all as specified and directed.

S&F Socket outlet 3 pin, 5A, flush type complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

S&F bell push flush type 5 Amps complete all as specified and directed.

S&F Ding Dong musical AC. 230 volts,single pole complete all as specified and directed.

S&F Ceiling rose three teminal /PVC/ polycarbonate, insulated body complete all as specified and directed.

S&F electronic fan regulator, 100 watt, (5 stepped type), 240 Volt for 1200/1400 sweep AC ceiling fan complete all as specified and directed.

S&F in repairs 3mm thick laminated bakelite sheet, cutting to 9"x11" size, drilling holes for mounting switch/ socket/ regulators etc, fixed with screws and GI covers with cup head washers, complete all as specified & directed.

S&F in repairs 3mm thick laminated bakelite sheet, cutting to 5"x7" size, drilling holes for mounting switch/ socket/ regulators etc, fixed with screws and GI covers with cup head washers, complete all as specified & directed.

S&F in repairs 3mm thick laminated bakelite sheet, cutting to 7"x9" size, drilling holes for mounting switch/ socket/ regulators etc, fixed with screws and GI covers with cup head washers, complete all as specified & directed.

S&F in replacement of fan capacitor of 2.5/3.5 mfd suitable for ceiling fan and exahaust fan complete all as specified & directed.

M&L for PVC casing capping 20 mm wide on wall/roof pipe 20 mm wide on wall/ceiling (ISI marked, interlocking type) with all fitting ,complete all as specified & directed.

M&L for PVC casing capping 25 mm wide on wall/roof pipe 25 mm wide on wall/ceiling (ISI marked, interlocking type) with all fitting ,complete all as specified & directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified and directed.

S&F energy efficient LED bulk head luminaire, 1x15 watt, wall mounted made of die cast aluminium with opal diffuser IP-65, LED lamp, lamp holders, etc. complete with all accessories including connecting up with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting 230V, 50 HZ, complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including one LED retrofit Lamp of B-22 holders base warm white Code No LHLDRUEML8X005 of make Havells or equivalent make of Phillips/Crompton etc complete all as specified and directed.

S&F of fully diffused recessed mounted luminaire 2'X2' LED 36 Watt suitable for POP/Gypsum false ceiling complete with all accessories pre-wired and making connection with three core PVC insulated overall sheathed flexiable copper cable of size 0.75sqmm from ceiling rose to light fitting, complete all as specified & directed.

Supply and fixing factory made epoxy powder coated distribution board, SPN, 12 ways with metal door (IP-43 protection), confirming to IS : 8623 fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall, suitable for universal mounting including 100 Amp copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts, suitable for one SPN/DP MCB as incomer and SP MCB outgoing, complete all as specified & directed .

Supply and fixing factory made epoxy powder coated distribution board, SPN, 8 ways with metal door (IP-43 protection), confirming to IS : 8623 fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall, suitable for universal mounting including 100 Amp copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts, suitable for one SPN/DP MCB as incomer and SP MCB outgoing, complete all as specified & directed .

Supply and fixing factory made epoxy powder coated distribution board, VTPN, 4 ways with metal door (IP-43 protection), confirming to IS : 8623 fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall, suitable for universal mounting including 100 Amp copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts, suitable for one one SPN/DP-MCB as incomer and SP MCB outgoing, complete all as specified & directed .

Supply and fixing factory made epoxy powder coated distribution board, VTPN, 4 ways with metal door (IP-43 protection), confirming to IS : 8623 fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall, suitable for universal mounting including 200 Amp copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts, suitable for one one FP- MCCB 160/250 Amp as incomer and SP MCB outgoing, complete all as specified & directed .

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified & directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 to 63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified & directed.

S&F in replacement of MCCB 63 Amps four pole 415 volts thermal magnetic release ICU=100% ICS having breaking capacity 16 KA including connection terminal strip complete all as specified & directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified & directed.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed FRLScable 1100 Volts grade heavy duty copper conductor multistranded of size6.0 Sqmm (nominal area) drawing in and including 25 mm dia or higher medium duty PVC concealed conduit and conduit accessories and fittings. including one single core green colour PVC Insulated unsheathed FRLS cable copper conductor multistranded of size 6.0 Sq mm as earth wire upto common earth and connected to earth dolly complete all as specified & directed.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed FRLScable 1100 Volts grade heavy duty copper conductor multistranded of size6.0 Sqmm (nominal area) drawing in and including existing PVC concealed conduit and conduit accessories and fittings. including one single core green colour PVC Insulated unsheathed FRLS cable copper conductor multistranded of size 6.0 Sq mm as earth wire upto common earth and connected to earth dolly complete all as specified & directed.

S&F of Intergral LED security light luminaire 25 W LED, 230 volts made up of pressure die cast aluminium housing powder coated with high power SMD LED’s lens & toughned glass IP-66, luminaire, mounted on & including GI bracket made out of 50mm bore medium grade pipe of 1.70m length, bent to required shape, fixed on PCC/Steel pole with 02 Nos. clamps of flat iron (40 x 6mm), nuts, bolts and washers including painting with two coats of aluminium paint over a coat of red oxide zinc chrome primer, making connection with PVC copper conductor cable of 1.5 sqmm and taking down old unserviceable light fitting of any type/size, complete all as specified & directed.

S&F in repair security light fitting LED fitting/CFL fitting for replacement of unseviceable Led Driver and refixing after repair including replacement of any spares cable connecations complete all as specified & directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and connecting to main switch or switch board complete and incl PCC masonry pit of 300x300x300mm interior dimensions in PCC 1:2:4 type B-1 RCC cover with GI frame, charcoal and common salt 15cm in layers all round the earth plate, 15mm dia GI watering pipe, a funnel with wire mesh should be provided on top of watering pipe complete all as specified as per electric plate No 3 of SSR 2009 including testing after completion complete all as specified and directed.

M/S VED PAUL MAHAJAN (BID ID -3135236)

JK BUILDERS AND DEVELOPERS (BID ID -3125431)

M/s Anand Prakash (BID ID -3126646)

M/s ATHARAV ELETCTRICALS (BID ID -3129644)