Providing service connection cable and shifting of the existing point of service to the newly constructed power room at Sri Badrakaliamman Temple, Ambagarathur Karaikal.

Amount

3 1/2 x 95sqmm armoured aluminium U.G cable- 1.1 KV grade. Make: Finolex/Polycab

3 1/2 x 150sqmm armoured aluminium U.G cable-1.1KV grade .Make: Finolex/Polycab

Laying and fixing of one number PVC insulated and PVC sheathed/XLPE aluminium conductor power cable of 1.1KV grade, of size exceeding 25sq.mm but not exceeding 120sqmm on surface as required.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of exceeding 120 sq.mm but not exceeding 400sq.mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required in Bituminous Road

Supplying and making end termination with copper gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required:4 X 16 Sq.mm

Supplying and making end termination with copper gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required:4 X 25 Sq.mm

Supplying and making end termination with copper gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required: 3 1/2 X 95 Sq.mm

Supplying and making end termination with copper gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required: 3 1/2 X 150 Sq.mm

Supplying of 100 mm dia. GI pipe medium class

Supplying and laying of following size DWCHDPE pipe ISI marked along with all accessories like socket ,bend, couplers etc., conforming to IS 14930,part II complete with fitting and cutting ,jointing etc.,in the existing trench ,complete as required .90mm dia (OD -90mm & ID -76 mm nominal )

Earthing with G.I.medium pipe 3.0 metre long and 40mm dia including accessories 250 x 50 x 6 mm G.I clamp with 12mm bolt, nut and washer for connecting earth wire, RCC ring enclosure and cover plate complete as required:-

Extra for salt and charcoal for pipe earth electrode as required.

Supplying and fixing of Copper flat 25 X 3 mm.

Supplying and laying 8 SWG copper wire (4.0 mm dia.)

Supplying and laying 1807 8 SWG G.I wire (4.0 mm dia.)

Supplying and fixing 6 amps to 32 amps rating ,Single pole,240 volts’' series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make:ABB/L&T Hager

Supplying and fixing 40 amps to 63 amps rating, Triple Pole and Neutral,240 volts’' series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Siemens/ABB

Supplying and fixing 63 amps rating four pole,415Volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc .as required. Make: Siemens/ABB/L&T HagerBB

Supplying, Installation, testing and commissioning of surface/recess mounting, vertical type,415Volts, TPN MCB distribution board of sheet steel, dust protected, duly phosphatized and powdered painted, inclusive of 200amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, detachable gland/ knock out plate, of following ways (But without MCB's and incomer) as required Make: Siemens/ ABB/L&T Hager. 8 Way(8+24) - TPN, double door,MCB DB,Vertical Type

Supplying and fixing of 125/200/250/315A DIN HRC fuse base. Make: Standard/Havells/C&S

Supplying and fixing of 250A HRC fuse link (DIN type). Make: Standard/Havells/C&S

Supplying and fixing of Aerial board

Supplying and fixing of 25x6 mm pole clamp

Supplying and fixing C.T. metering panel board as per Electricity Department Specification (Drawing enclosed). Panel board of size 1800mm x 900mm x 300mm made of 18 gauge CRMS sheet painted with two coats of enamel paint over Zinc chromate primer with necessary MS base channel. The panel board shall include power mat, copper busbar, 8mm thick Hylem sheet of size 84 x 54cm.

Supplying erection, testing and commissioning of one no of main cubical switch panel board for CT panel control power supply cut off switch unit of over all size 850mmx450mmx250mm made out of 16SWG thick cold rolled M.S sheet. The main switch panel has to be mounted on MS angle frame fixed suitably on the wall of 1no.of 250A four Pole cubical switch make (L&T),with suitable size for cable entry, the bottom

sheet of the shall should be of thick sheet rolled sheet for cable entry. The panel should be painted with two coats of rust proof Zinc chromate and two cots of anti corrosive epoxy shade 631 Siemens grey paint after completion of de-rusting process. The door should be of flush type in position .The panel provided with removable type gland plated to the bottom and with sufficient holes of required diameter. The cost should be inclusive of minor modification suitable for site condition as approved by the Engineer-in- charge.

Supplying of 200/5 - 600/5 A current transformer (0.5% precision). Make: Legrand-Lexic