PROVN OF TRG STORES ALONG WITH HARSTANDING FOR LOADING UNLOADING AT DSSC WELLINGTON

Amount

Surface dressing n exc 15 cm deep as in Hard/Dense soil for foundation etc complete all as specified and directed.

Excavation in trenches n. exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in Hard/Dense soil for foundation etc complete all as specified and directed.

M&L Cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in foundations,filling and mass concrete complete all as specified and directed.

M&L Reinforced cement concrete (nominal mix) type B-1, (1:2:4) using 20mm graded stone aggregate as in foundation,Raft,column complete all as specified and directed.

M&L Reinforced cement concrete(nominal mix) type B-1, (1:2:4) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed

M&L Reinforced cement concrete (nominal mix) type B-1, (1:2:4) using 20mm graded stone aggregate as in plinth beam,tie beam,lintel beam, roof beam and band etc complete all as specified and directed.

M&L Formwork to formwork to sides of concrete, foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular or polygonal) for fair finished surfaces of concrete complete all as specified and directed

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers for fair finished surfaces of concrete complete all as specified and directed.

S&F TMT bars Mild steel bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Description all as item No 7 above but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete as in hard /dense soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed by Engr In Charge.

M&L Precast solid block masonry with solid blocks exceeding 10 cms in width 1:3:6 type C1 (using 20mm graded aggregate) and set in cement mortar 1:6 all complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L Hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D2 (40 mm graded aggregate) as in Sub base floor finished even and rough to receive the top finish as in sub base of floor etc complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B1 (20 mm graded aggregate) as in floor finishes even and rough to receive top finish complete all as specified and directed.

M&L Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finishing the surface complete all as specified and directed.

M&L Heavy duty vitrified unpolished porcelain floor tiles of size 300 x 300mm, 10mm thick of make Neo Deccan Natural of somany or Endura of Johnson or equivalent of other specified makes suitable for heavy vehicle movement, laid in floors/skerting of pattern as approved, set and jointed with Epoxy Grout with spacers of somany to match complete all as specified and directed.

S&F Steel windows box type factory made (double leaf, gauge and glazed) with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dove tailed or welded, complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

M&L Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290.Gde-E-165 complete all as specified and directed.

S&F 4mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L 15mm thick rendering in Cement Mortar 1:6, on Concrete or fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L 15mm thick rendering plaster on fair face of brick-work or concrete surface incl finish the surface even and smooth with using extra cement in CM 1:4 including mixed with water proofing compound complete all as specified and as directed . (Note:- WPC shall be paid and measured seperately)

Supply only Liquid water proofing compound complete all as specified and as directed

S&F 0.8mm thick Plain black Mild steel sheeting, in ridges, hips, valley gutters, drip,gate etc and straight flashings (length and girth as fixed) complete all as specified and as directed

M&L Mild steel work as in tubular roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) quality- A complete all as specified and as directed.

S&F 0.5mm thick Prepainted Galvalume Aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550MPA as in roof covering /cladding to wall,crimp curved where necessary fixed with self tapping screws complete all as specified and as directed.

S&F 0.5mm thick Prepainted Galvalume Aluminium zinc coating GI based plain steel sheet of any colour having tensile strenth of 550MPA as in roof covering /cladding to wall,fixed with self tapping screws complete all as specified and as directed.

S&F Pressed steel frames of size 105 mmx 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and as directed.

M&L Aluminium designer powder coated decorative curtain rods antique finish 25mm dia dia, exterior grade 3mm thick with and including side caps, holding clamps and 'F' and 'L' brackets, fixed to wall with PVC rawl plug and brass screws etc., complete all as specified and as directed.

M&L Providing precast cement concrete louvres and jallies,25mm thick type B-0 (1:2:4) using 12.5mm grade stone aggregate including all mould- ings and set in CM 1:4 complete all as specified and as directed.

M&L Preparation of surfaces of new steel of any description over 10 cm in width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L 75mm thick Plain Cement Concrete type C-1, 1:3:6 ,20mm graded stone aggregate as in floors, plinth protection etc. finished even & fair without using extra cement complete as specified and as directed.

M&L Preparation newly plastered surfaces of external walls and applying one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger or equivalent of approved make complete as specified and as directed.

M&L Preparation of new plastered surfaces of walls applying two coats of distemper oil emulsion over one coat of alkali resistant primer as per manufacturers instruction complete all as specified and directed.

M&L Preperation of new wall surface of concrete or brick Surfaces of any description over10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over one coat of primer complete all as specified and directed.

S&F Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 complete all as specified and directed.

M&L PCC 1:3:6 type C-2 using 40mm graded stone aggregate steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Surface Excavation not exc. 30cm deep & avg 15 cm deep & getting out in hard dense soil , complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade jointed with grey cement without pigment including 50mm thick sand cushion complete all as specified and directed

M&L Chequered cement concrete tiles of size 30cmx30cmx 25mm thick ,set ,jointed and pointed in neat cement slurry in floors with grey cement and pigments of required colour complete all as specified and directed

M&L Framed work as in doors or gates of angle iron or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,running rails and guides ) and hanging , also fastening and fixing complete.( FE 410 W Quality)complete all as specified and directed

M&L PCC type C-2 (1:3:6) using 40mm graded stone aggregate as in surface channels and drains including necessary form work complete all as specified and directed

M&L Concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for the following : Make of cable : Havells/Polycab/Finolex. Make of conduit-Precision/Modi/finolex.

One Light /fan /Call Bell point controlled by one switch 5/6 Amps.

One switch socket outlet point 5/6 Amps on independent board.

Description all as per Item No45.00 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete all as specified & as directed.

NOTE for Item Nos 45 to 46: 1) Modular metal flush boxes shall be measured & paid separately. 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S&F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular switch with indicator, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXIW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Concealed modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Concealed modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Concealed Modular metal flush box suitable for fixing switches/sockets of 6 modules all as directed. Cat No : ACTXMIIX06, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Concealed Modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S&F Modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor

S&F Modular cover plate suitable for fixing switches/sockets of 6 modules all as directed. Cat No : ACVPPCWV06, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor

NOTE for Item Nos 47 to 56 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S&F Ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/CG/Anchor

S&F Ultra modern, Recess mounting, 40W, 6500K LED luminaire of size 2' x 2' suitable for ceiling complete with electronic driver & high brightness LED complete all as specified and as directed. Make: LUKER, Cat No: LPS40 or techno-commercially equivalent in Havells/Jaquar by the Engr- in- charge.

S&F Surface and wall mounted LED batten 20 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make: Havells, Cat No:ENDURALINEARPROBS20WLEDSPC55IND or techno-commercially equiv In Jaguar/Philips

S&F Energy saving high power LED building security light of 30W made up of pressure die cast aluminum housing with embedded PC cover having top opening seperate driver compartment with IP66 protection including 40mm dia bracket bended into 120 degree angle and making connections in flexible conduit all as directed. Make: Cat no ENDURASUNDOWNSL30WLED 757PASYBOPC Endura Sun Down of Havells or techno-commercially equiv In Jaguar/Philips

Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator/other surfaces etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Crompton. Notes :- The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates.

S&F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : AU10S40633C or techno-commercially equivalent in Siemens/Legrand.

S&F MCB, DB, TPN, 04 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN004DD or techno-commercially equivalent in Siemens/Legrand.

S&F MCB, single pole,C-Series 240 Volts of capacity (6-32 Amps) as ordered with breaking capacity 10 KA. Make-L&T, Cat No-AU10S10(06-32)3C or techno-commercially equivalent in Legrand/ABB/Siemens.

M&L Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI strip of size 32X6 by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 40mm bore medium grade GI protection pipe (upto 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire mesh, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified including taking out the existing u/s earthing accessories. Note: On testing after completion, if the desired earth resistance is not obtained the earthing shall be redone at no extra cost till the entire satisfaction of Engr-in-Charge. Make of GI Pipe : TATA/Jindal/Prakash

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, Armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 16 Sqmm incl connecting with suitable glands, lugs etccomplete all as specified and as directed. Make: Havells/Gloster/Polycab.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m depth for errecting of poles, Laying of cables and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in depth in hard/dense soil complete all as specified and as directed.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point all as directed.

Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand complete all as specified and directed.

Supply and laying light grade GI Pipe (ISI Marked) of 40mm dia for cable protection to be fixed on wall/in trenches with necessary clamps or in road crossing,complete all as specified and as directed. Note: Rate quoted shall include MS clamps of required size wherever pipes are to be fixed on walls/other surfaces. Make:Tata/Jindal/Prakash

M&L Cutting the existing hard standing /PCC /WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing top not less than 25 cm thick cement concrete type C-1 (1:3:6) using 20 mm grade aggregate, bottom filled with excavated earth and finishing to a uniform smooth surface complete all as specified and directed.

Supply, spreading and compacting of Riddled sand in trenches for cable cushion on both top and bottom of cable, including ramming complete all as specified and as directed.

Sree Constructions