CWEK-18/2020-21

Amount

SCHEDULE A PART I (B/R WORKS)

Dismantling of brick work or stone masonary, precast cement concrete walling built in cement mortar including all quoins, arches, pillars etc., complete all as specified and as directed.

Material and labour for brick work with subclass ‘B` old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), complete all as specified and as directed.

Material and labour for brick work with sub class B bricks old size bricks, straight or curved on plan any radius in cement mortar (1:4), for half brick thick wall complete all as specified.

Material and labour for Rendering 15mm thick on fair faces of brick work or concrete surface in cm (1:4) rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster of any description, thickness and in any position including raking out joints, hacking for key, scrubbing down with water etc , and removal the rubbish/ demolished material outside defence land, complete all as specified and as directed.

Material and labour for 10mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for 15mm thick rendering in two layers on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair, complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

Material and Labour for 5mm thick cement plaster in CM (1:3) to ceiling surface and finished the surface even and smooth without using extra cement complete all as specified.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkali primer over a coat of 2-3mm thick wall care putty , complete all as specified and as directed.

Material and labour for two coat of cement base paint over a coat of alkaline resistant primer over a coat of 2-3mm thick wall care putty on newly plastered surface including preparation of surface of wall complete all as specified and as directed.

Material and labour for one coat of white wash on old plastered surface of ceiling including preparation of ceiling surfaces complete all as specified and directed

Material and labour for three coat of white wash on newly plastered surface of ceiling including preparation of ceiling surfaces complete all as specified and directed

Material and labour for complete removal of existing treatment on surfaces of wall by using appropriate technique as approved by Engr-in-charge for complete removal of all layers of old treatment and reaching upto old plastered surface and applying two coats of oil bound distemper with hand roller, over a coat of primer over a coat of 2-3mm thick wall care putty complete all as specified and as directed.

Material and Labour for one coats of cement base paint to old plastered wall surfaces incl preparation of surfaces complete, all as specified and as directed.

Material and labour for old treated surfaces (Plastered or un-plastered) of Wall, etc. and applying one coat of oil bound distemper with hand roller, complete all as specified and as directed.

Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Taking down chowkats or frames with shutter area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete all as specified and as directed.

Taking down chowkats or frames with shutter area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete, all as specified and as directed.

Taking down shutters of any description exc. 1.00 sq. m and not exc. 2.00 sq. m each and refixing in the same opening after resecuring or easing and adjusting shutters,complete all as specified and as directed.

Taking down shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each, from chowkhat complete all as specified and as directed .

Supply and fixing for 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and as directed .

Supply and fixing mild steel framed work as in door chowkats, gate of angle or other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides) and hanging also fastening and fixing complete all as specified.

Supply and fixing IInd class (hollock) factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and as directed.

Supply and fixing factory made flush shutters 35 mm thick, solid core construction, with block board core and and plywood face panels commercial type on both house with lipping/frame to match, ISI marked complete all as specified and as directed.

Supplying and Fixing for factory made 35mm thick, 2nd class HW, plain framed, panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated, complete, all as specified and as directed.

Supply and fixing mild steel helical door spring 200 mm long fixed with screws to wooden chowkhats or welding to steel chowkhats, complete all as specified and as directed.

Supply and fixing Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate 140 mm, ISI marked complete all as specified.

Supply and fixing aluminum anodized, barrel tower bolt of extruded section 150mm long, ISI marked, complete all as specified and as directed.

Supply and fixing aluminum anodized, barrel tower bolt of extruded section 100mm long, ISI marked, complete all as specified and as directed.

Supply and fixing for ISI Marked 150 mm long, aluminium handle, cast type, anodized, complete, all as specified and as directed.

Supply and fixing for ISI Marked 125 mm long, aluminium handle, cast type, anodized, complete, all as specified and as directed.

Supply and fixing for butt hinge ,ISI Marked ,100mm size, medium weight, cold rolled mild steel complete, all as specified and as directed.

Supply and fixing 250 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and as directed.

Material and Labour for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish/ demolished material outside defence land, complete all as specified and as directed .

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular) , area of each tiles exceeding 0.18 sqm and not exceeding 0.38 sqm and 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface over and including cement screed bed 10mm thick in cement mortar (1:4) , complete all as specified and as directed.

Material and labour for premium quality, joint free non skid coloured ceramic tiles, of same description and length as of floor tile but 100 mm height on vertical surfaces of walls including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified and as directed.

Material and labour for premium quality, joint free, non skid coloured ceramic tiles (Square/rectangular) , area of each tiles exceeding 0.11 sqm and not exceeding 0.18 sqm and 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/Sqm and pointed in white or coloured cement to match the surface over and including cement screed bed 10mm thick in cement mortar (1:4) , complete all as specified and as directed.

Material and labour for premium quality, glazed coloured ceramic tiles 200 x 300 x 7mm thick on vertical surfaces of walls including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match complete, all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors , aprons etc. laid, bedded and pointed in any mortar, complete all as specified and as directed..

Material and labour for 18mm thick granite (of any type) work (table rubbed and polished and moulding) in platforms, steps, jambs, pillar, counter WHB, floor over and including 20mm thick in cement mortar (1:3) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite, complete all as specified and as directed.

Supply and fixing chequered cement concrete tiles with grey cement and pigment , rubber moulded with laquer polish for extra shine, size 300 mm x 300 mm x 22-25 mm thick, ISI marked, coloured, set jointed and pointed in neat cement slurry over and including 20 mm thick (average thickness) cement screed (1:4) base, complete all as specified and as directed.

Material and labour for moulding on sides of granite/marble 18-20mm thick complete all as specified and as directed.

Material and labour for machine cut kota stone slab 18-20 mm thick (of size not less than (55 cm x 55 cm) laid in flooring and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting waste, rubbing and polishing (Granite finish) over and including cement screed bed 20mm thick in cement mortar (1:3) base , complete all as specified and as directed.

Material and labour for machine cut kota stone slab 16-18 mm thick laid on vertical surface and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) but as on vertical surface, riser, pillar, skirting, etc. over and including 10mm thick plaster in cement mortar (1:3) on brick work or concrete surfaces complete, all as specified and as directed.

Material and labour for machine cut cudappa stone slab 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including cement screed bed 15mm thick in cement mortar (1:4) base , complete all as specified and as directed.

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and as directed .

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and as directed.

Supplying and fxing for ISI Marked, 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors, complete, all as specified and as directed.

Refixing steel water tubing of 15 mm bore in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed.

Supplying and fixing for ISI Marked, 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors, complete, all as specified and as directed.

Refixing steel water tubing of 20 mm bore in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed.

Dismantling plain or corrugated mild steel sheeting any gauge, thickness, including Nanital or similar pattern roof covering, complete all as specified.

Supply and fixing for 0.63mm Galvanised, Corrugated Mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, ISI marked,, in roofs, walls etc. with grade of zink coating 275, complete all as specified.

Supply and fixing 0.80 mm thick Plain, galvanized mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) of class-2, ISI Marked, complete all as specified.

Material and labour for preparing new zinc (or galvanised) surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc. and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.. Note- The painting work will be carried out on CGI sheet roof Top .Pattern shall be as decided by GE.

Supply and fixing ( in repair), mild steel 25mm dia, 1.6mm thick, PVC coated, fancy type, heavy duty drapery rod incl pair of bracket,finials (latto) at ends including fixing on wall with screws, complete, all as specified and as directed.

S/F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, with all fitting and fixtures complete all as specified and as directed.

Supply and fixing factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet , reinforced with steel square tube , complete all as specified and directed.

Supply and fixing 10 litre capacity, low level, virgin polypropylene cistern, ISI marked, coloured complete with PVC bend/flush pipe and making all connection including taking down existing high or low level unerviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and as directed.

Supply and fixing in repair, vitreous china, wash hand basin, white, flat back of size 550x440mm excluding CI brackets but including PVC waste pipe, PVC connections and chromium plated waste coupling, etc.,complete all as specified.

Supply and fixing in repair, vitreous china wash hand basin white flat back of size 550x400mm with padestal including CI brackets embedded in wall in CM 1:4, PVC waste pipe, PVC connections and chromium plated waste coupling, etc.,complete all as specified and as directed.

Supplying and fixing (in repair) vitreous China coloured squatting pan of Orissa pattern size 580mmx440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including lime concrete, making good to disturbed surface of sub base and flooring with the existing surface and connection to flush pipe complete all as specified and as directed.

Supply and fixing in repairs, chromium plated central hole wash hand basin mixer with regular spout without Popup waste system with 450mm long braided hoses all as specified.

Supply and fixing in repairs, chromium plated wall mixer with telephonic shower arrangement and telephone shower crutch including 90cm long Chromium plated pipe, complete all as specified.

Supplying and fixing (in repair), shower arm 240 mm long, light weight , round shape for wall mounted showers with wall flange suitable for 15mm bore pipe including overhead shower rose 125mm dia round shape single flow, complete all as specified and as directed. (Make : Cat No. BS-76 of Prayag or equivalent model in makes mentioned in Appendix 'B' of tender document ) Note- Contractor will submit to Engineer-in-Charge a guarantee certificate from manufacturer before claiming payment.

Supplying and fixing (in repair), bib tap screwed down high pressure, cast copper alloy,fancy type, chromium plated, ISI marked, with capstan heads, screwed down suitable for 15mm bore pipe or union, complete all as specified and as directed. (Make : ESSCO Cat No-DLX-511 or equivalent model in makes mentioned in Appendix 'B' of tender document ) Note- Contractor will submit to Engineer-in-Charge a guarantee certificate from manufacturer before claiming payment.

Supply and fixing in repair, angle cock, 15mm dia chromium plated, cast copper alloy, fancy type, ISI marked, screwed down, high pressure with capstan head, screwed both ends for iron pipes or for unions, complete all as specified and as directed by the Engineer-in-Charge. (Make : ESSCO Cat No-DLX-526 or equivalent model in makes mentioned in Appendix 'B' of tender document ) Note- Contractor will submit to Engineer-in-Charge a guarantee certificate from manufacturer before claiming payment.

Supply and fixed in repair, stop valves, 15 mm dia pipe, chromium plated, fancy type, ISI marked, screwed down, high pressure with capstain head, (concealed type) with sliding flange, screwed both ends for 15mm bore pipes or for unions, complete all as specified and as directed. Make- PRIMA Cat No PSP-507 or equivalent model in makes mentioned in Appendix 'B' of tender document. Note- Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment.

Supply and Fixing for brass tubular towel rail (finish Glossy), 20mm dia, D type, 60cm long between flanges, complete all as specified and as directed. (Make : ESSCO Cat No-1111 or Prayag Cat No. BA-20 or equivalent model in makes mentioned in Appendix 'B' of tender document ) Note- Contractor will submit to Engineer-in-Charge guarentee certificate for tubular towel rail from manufacturer before claiming payment.

Supply and Fixing in replacement for Corner Glass shelf 300 x 300 mm (Big) , 225 x 225 mm (medium) & 150 x 150 mm (small) three set, complete all as specified and as directed. Make:- Cera Cat Part No CA 501, CA 502 & CA 503

Supply and fixing in repairs, chromium plated corner glass shelf 60mm long with CP railing complete all as specified and directed. ( Make- Jainko - Cat No GSJ-2 or equivalent model in makes mentioned in Appendix 'B' of tender document)

Supply and fixing in repairs for PVC waste pipe for wash hand basin/urinals 32mm dia and 80 cm long with CP brass coupling of (Half or full threaded) (minimum weight 32mm-45gms) ,complete all as specified and as directed.

Supply and fixed PVC connections 45cm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed.

Supply and fixed PVC connections 60cm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and as directed.

Supply and fixing cast iron Nahani traps 100 mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete, all as specified and as directed.

Supply and fixed in repair stainless steel grating suitable for floor trap 100mm bore fixed with white cement complete, all as specified and as directed.

Supply and fixed in repair stainless steel grating suitable for floor trap 150mm bore fixed with white cement complete, all as specified and as directed.

Supply and fixing in repair, water storage tank 1000 ltr capacity HDPE triple layer, white coloured, conforming to IS , fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore,including taking down the unserviceable water tank and removing from site, complete all as specified and as directed.

Supply and fixing in repair, water storage tank 500 ltr capacity HDPE triple layer, white coloured, conforming to IS , fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore,including taking down the unserviceable water tank and removing from site, complete all as specified and as directed.

Supply and fixing in repair stainless steel sink 1.00mm thick, ISI marked for kitchen with plug, waste PVC pipe, washers including cantilever cast iron brackets connecting union waste pipe with drainage board over all size 940 mm x 460 mm with bowl size 405 mm x 354mm x 203 mm etc, complete all as specified and as directed by the Engineer-in-Charge. (Make :PRAYAG Cat No-1240-D (Solitaire Range) or equivalent model in makes mentioned in Appendix 'B' of tender document ) Note- Contractor will submit to Engineer-in-Charge a guarantee certificate from manufacturer before claiming payment.

Supply and fixing in repair, stainless steel sink 1.00mm thick, ISI marked for kitchen with plug, waste PVC pipe, washers including cantilever cast iron brackets connecting union waste pipe of size 485 mm x 410 mm with bowl size 410 mm x 350mm x 20 mm etc complete all as directed. ( Make- Jainko - Cat No SSJ-5 or equivalent model in makes mentioned in Appendix 'B' of tender document) Note- Contractor will submit to Engineer-in-Charge a guarantee certificate from manufacturer before claiming payment.

Supply and fixing ( in repair), Sink wall mixer, chromium plated, fancy type with capstan head handle, screwed down high pressure with lettered hot and cold including CP brass flange and necessary extension nipple screwed for 15 mm dia pipe complete, all as specified and as directed. Note- Contractor will submit to Engineer-in-Charge a guarantee certificate from manufacturer before claiming payment.

Material and labour for lagging to 20mm dia pipes used in internal water supply or plumbing all round with 25mm thick bonded mineral wool pre-formed `SNAP ON` pipe sections of density 144 Kg/cum conforming to IS 9842 complete, all as specified and as directed.

Material and labour for lagging to 15mm dia pipes used in internal water supply or plumbing all round with 25mm thick bonded mineral wool pre-formed `SNAP ON` pipe sections of density 144 Kg/cum conforming to IS 9842 complete, all as specified and as directed.

Supply and fixing ( in repair), stainless steel plate rack 1mm thick of size 900 x 600 x 250 mm with stainless steel screw to wall, complete all as specified and directed.

Supply and fixing for aluminium alloy anodized (powder-coated) window frame with double leaf and double shutter (both gauged and glazed shutter in same frame ) open able type, with aluminium sections as per of “Jindal” section numbers for casement windows with double shutters including aluminium alloy anodized snap type beads, handles, aluminium anodized barrel tower bolts and glazing clip, joint cleats, rubber gaskets etc., complete all as specified for series-B “ Jindal” section numbers for casement (a)Frame of section 101.6mmx44.45mmx2.10mm thick and section for shutter 47.62x44.45x1.95 mm thick (b) Mullion 53mmx52mmx 2mm thick not less than 1.065 kg/mtr. (c) Glazing clip weighing 0.259kg/mtr. (d) Windows shall be provided with 02 Nos. of tower bolt for single leaf and 03 Nos. of tower bolts for double leaf. Tower bolts shall be aluminium alloy anodized weighing 0.302kg/mtr. Handles shall be aluminium anodized ‘D’ type handle of size 98mm and thickness 2.37mm weighing 0.875kg/mtr and one no per each open able leaf shall be provided. (Note : 1. The rates shall be inclusive of provision of and fixing of rubber packing/gasket. Glass pane and wire gauge shall be measured and paid for separately. Manufacturers : M/S Indian Aluminium Co. Ltd., UCO Bldg, New Delhi. M/S Jindal Aluminium Pvt. Ltd. M/S Hindalco Pvt. Ltd. or any other equivalent approved by GE.

Supply and fixing aluminium anodized grill 5.5mm thick weight not less than 2.5kg per square (in the shape of expanded metal aluminium xpm jalli) opening size length of expansion (60mm) and width expansion 45mm fixed in aluminium anodized window with ‘F’ channel of handle section with screw, complete all as specified and directed.

Material and labour for solar control film 50 micron, reflective type, sticked to glass panes of any size and thickness as per manufacturers instructions complete all as specified and as directed .

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified and as directed.

Supply and fixing for sheet glass 4mm thick, ordinary quality, in square not exc 0.5 sqm in each pane completed, all as specified and as directed.

Supply and fixing Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6mm dia . GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40X3mm size 60mm long complete, all as specified and as directed. Make- Armstrong or equivalent model in makes mentioned in Appendix 'B' of tender document.

Supply and fixing 12mm thick Gypsum board ceiling fixed with screw to Gl frame work as per manufacturers instructions complete, all as specified and as directed. Make- Armstrong or equivalent model in makes mentioned in Appendix 'B' of tender document.

Supply and fixing , 18/19mm thick pre laminated particle board, exterior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination with 5mm thick teak wood edging on one side, bottom and top and other side 10mm teak wood edging with rebate suitable for cup board shutters, palmet box, etc. and leaping treated with french polish complete all as specified and as directed.

Material and labour for decorative moulding /beading 5mm thick and 19mm wide, of fancy type fixed to board/ply of any description complete, all as specified and directed.

Supply and fixing continuous (piano) hinge, mild steel bright finish or electro galvanised, width of flap when open 30 mm complete, all as specified and directed.

Supply and fixing 40 mm dia brass polished cup board knobs fixed with nut, screw and washer of mild steel, bright finished complete, all as specified and directed.

Supply and fixing brass handle, bright finish 100 mm long fixed with brass screws and nuts complete, all as specified and directed.

Material and labour in repair, for 20mm thick boarding, hardwood IInd class, planed one side with butt joints chamfered one side and boarding is matched, fixed with nails in any situation (except flooring and skirting) complete all as specified and as directed.

Material and labour for Second class hardwood (Hollack) plain fillets, square, rectangular or triangular in section of area exceeding 6 Sq. cm and not exceeding 13 Sq. cm, clean sawn, secured with nails or brads, complete all as specified and as directed.

Supply and fixing for butt hinge ,ISI Marked ,75mm size, medium weight, cold rolled mild steel complete, all as specified and as directed.

Demolition of cement concrete (reinforced) in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas, and similar suspended work and removing rubbish/ demolished material outside defence land, complete all as specified and as directed .

Material and Labour for providing Precast reinforced Cement Concrete 1:2:4 type B1 using 20mm graded aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete, all as specified and as directed.

Material and Labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete, all as specified and as directed.

Supply and fixing mild steel works in bands, straps, supports, stays, bolts, hooks, hold fasts etc, similar articles conforming to Fe-290.Gde-E-165, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and as directed.

Material and labour for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as levelling course, finished even and fair to receive floor finishes, complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate), 50mm thick, as in plinth protection/PCC path and paving, laid in panels of area not exceeding 2.00 sqm with 6mm wide joints filled with mastic (using bitumen and sand mixture applied hot in the ratio of 1:3 by weight) formed at the end of each panel and change in direction of plinth protection/PCC Path and paving and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for hardwood IInd class weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed.

Dismantling of cast iron or reinforced concrtee drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

Supply and fixing cast iron soil, waste and vent spun pipes 100 mm bore, ISI marked, in any length, with or without ears, with cement joints, laid in trenches complete all as specified and as directed.

Supply and fixing cast iron soil, waste and vent spun pipes 75 mm bore, ISI marked, in any length, with or without ears, with cement joints, laid in trenches/floor complete all as specified and as directed.

Supply and fixing cast iron soil, waste and vent spun pipes 75 mm bore, ISI marked, in any length, with or without ears, with cement joints,fixed to walls complete all as specified and as directed.

Supply and fixing in repair cast iron bends (any radius) 100 mm dia diminishing pieces or tapers complete all as specified and as directed.

Supply and fixing in repair cast iron bends (any radius) 75 mm dia diminishing pieces or tapers complete all as specified and as directed.

Supply and fixing in repair, cast iron branch pieces, 100 mm dia, single (equal or unequal), ordinary or inverted or with parallel branches complete all as specified and as directed..

Supply and fixing in repair, cast iron branch pieces, 75 mm dia, single (equal or unequal), ordinary or inverted or with parallel branches complete all as specified and as directed .

Supply and fixing 110mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and as directed by the Engineer-in-Charge. (Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985)

Supply and fixing of 75mm dia UPVC soil, waste, drain pipe, type ‘B’, conforming to IS 13592-1992, single socketed, in any length, with rubber rings joints or jointed with solvent cement, laid in trenches or in floor complete all as specified and directed. (Note- Rubber rings for pipes and fittings shall conform to IS 5382-1985.)

Supply and fixing stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore pipe complete all as specified

Supply and fixing stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore pipe complete all as specified

Material and labour for preparing new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Supply and fixing galvanized iron wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm mesh size fixed with tinned tacks or galvanized wire staple and including fixing with beads supplied with joinery when fixed in panels of joinery, complete all as specified and directed.

Material and labour for 100mm thick PCC 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base to floor, complete all as specified and as directed.

SCHEDULE A PART II (INTERNAL ELECTRIFICATION)

Taking down carefully any type point wiring (light, fan, socket or power) complete with fittings such as switches ceiling roses, pendants, regulators, sockets tube light fitting with all accessories etc. removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces complete, all as specified and as directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable flame retardant low smoke (FRLS) , 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade , ISI marked PVC casing caping not less than 32 mm width , 10 mm depth with accessories fixed on wall/ceiling surface and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable flame retardant low smoke (FRLS) , 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with including mild steel sunken box or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover extended up to 25 mm over sunken box for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan any type/bell point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per Srl item No.3.02 here in before but for socket outlet point 5 Amp on same board.

Description all as per Srl item No.3.02 here in before but for socket outlet point 5 Amp on Independent board complete, all as specified and as directed.

Description all as per Srl item No.3.02 here in before but one bell point controlled by one bell push complete, all as specified and as directed..

Description all as per Srl item No.3.02 here in before one light point controlled by two way switch complete, all as specified and as directed.

All as per the description of Serial Item No 3.02 above, but with 2.50 Sq mm un-sheathed multistranded cable for one socket outlet 15 Amps independent including continuous copper earth wire, PVC insulated of 2.50 Sq mm size complete, all as specified and as directed . (Switch, Socket shall be measured and paid separately)

Supply and fixing switch piano 5/6 Amps, flush button type, single pole, one way, 240 volt , AC supply, ISI Marked, complete all as specified and as directed.

Supply and fixing switch piano 15/16 Amps, flush button type one way 240 Volts, 50 Hz , AC supply, ISI Marked, complete all as specified and as directed.

Supply and fixing switch piano 5/6 Amps, flush button type, single pole, two way, 240 volt , AC supply, ISI Marked, complete all as specified and as directed.

Supply and fixing socket outlet 5 pin 5/6 amps, 240 volt. flush type, AC supply, ISI Marked, complete all as specified and as directed.

Supply and fixing socket outlet 2 in 1, 6 pin 6 /16 Amp and multi pin flush universal shuttered type, 240 volt, AC supply, ISI Marked, complete all as specified and as directed.

Supply and fixing bell push, flush button, 6 Amps, flush type, 240V, 50 Hz supply, complete all as specified and as directed.

Supplying and fixing electric bell, AC, ding-dong type, 230 Volt, single pole, complete all as specified and as directed.

Supply and fixing fan regulator electronic step type(Socket type), 120 watt, 230 Volts, 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified and as directed.

Supplying and fixing the ceiling rose, three terminal ISI marked surface backlit, complete all as specified and as directed.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, ISI Marked, complete all as specified and as directed.

Supplying and fixing LED bulk head light fitting 1x10 watt with lamp holder(1x10W) ABS housing, IP65 and connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of light complete, all as specified and directed by Engr-in-charge. Make: Bajaj Cat Part No. BIBWP 10WLED or equivalent model in makes mentioned for Group 2 in Appendix 'B' of tender document .

Supplying and fixing in replacement LED mirror light fitting with lamp, high output PMMA diffuser for glare free light, complete with all accessories internally prewired and connecting up with core twisted flexible copper conductor cable with suitable size, complete all as specified and as directed. Make- CG Ct Pt No- CDL-07-CDL or equivalent model in makes mentioned in Appendix 'B' of tender document .

Supply & fixing in replacement, security light fitting 60 watt LED fittings and all accessories pre-wired upto terminal block including bracket made up of 1.6m long GI pipe, 40mm dia light grade, bent to required length and fixed to wall with two clamps made of 40x6 mm mild steel flat iron, 4 Nos bolts with nuts and connecting with 3 core copper conductor flexible cable from terminal box to the ceiling rose or connector of the light point complete all as specified. Make- Havells Cat Pt No- LHEPBXU7PA7B060 or equivalent model in makes mentioned in Appendix 'B' of tender document .

Supplying only pin type LED 10 watt with B-22 base and connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete, all as specified and as directed.

Supply and fixing in replacement indoor decorative 20 watt LED tube light luminarie, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver , AC 220-240 Volts, 50Hz including lamp ( Lamp type LED tube light 1x 20 Watt) and connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete, all as specified and as directed. Make: Havells Cat Part No. ENDURALINEARNEOBS20WLED865SPCWH or equivalent model in makes mentioned in Appendix 'B' of tender document .

Supply and fixing ventilating fan made out of high quality Engineering plastic, resistant to colour change with anti static properties, 250mm sweep, 230 volts, ISI marked, 50 Hz, including connecting with 3 core copper conductor flexible cable of size 23/0.0076 from ceiling rose to connector of fan complete all as specified

Supply and fixing ceiling fan of 1200 mm sweep, 230 volts, ISI marked, BEE 5 star rating, 50 Hz complete with down rod and fan clamp with rubber reel including connecting with 3 core copper conductor flexible cable of size 23/0.0076 from ceiling rose to connector of fan complete all as specified Make: Havells Cat Part No. ES-50 or equivalent model in makes mentioned in Appendix 'B' of tender document .

Supply and fixing geyser 25 litre capacity, BEE 5 star rating, vertical type including cement work, fixing bolts, making good the disturbed wall surfaces with the existing surface, water connection, electrical connection with three core PVC insulated copper conductor cable of 40/.0076 size complete, all as specified and as directed. Make: Havells Cat Part No. GHWAPTTWHO25 or equivalent model in makes mentioned in Appendix 'B' of tender document .

Supply and fixing MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, C curve, 6 to 32 Amps, ISI marked, complete all as specified and as directed.

Supply and fixing MCB three pole neutral , 240 volts, 50Hz , breaking capacity 10KA, C curve, 63 Amps, ISI marked complete all as specified and as directed.

Supply and fixing distribution board for MCCB's Load line TPN, 4 ways, double door, 415 volts, with and including 200 amps rated bus bar, vertical type, IP 43 protection powder coated, with and including 100 Amp 3 pole MCCB, 50Hz , breaking capacity 16KA, C curve in incomer and 12 Nos of MCB's, SP, 63 Amps, as out going with suitable size of MS cabinet 2mm thick and making all type of connections with suitable size of gland for incomer cable complete , concealed on the wall surface, making good the disturbed portion with adjoining surfaces to match with existing finish and taking down the existing DB's and MCB's any type complete all as specified and as directed.

Supply , insatallation, testing of SPN distibution board 08 way,double door , IP 43 , as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles, concealed on the wall surface including taking down the existing DB's any type and description and making good the disturbed portion with adjoining surfaces to match with existing finish, complete, all as specified and as directed.

Excavating in trenches, not exceeding 1.50 metre wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 sq.m on plan and not exceeding 1.50m in depth and getting out in soft/loose soil, complete all as specified and as directed .

Returning filling in including spreding leveling watering and well ramming in layers not exc 25 cm each in soft/loose soil, complete all as specified and as directed .

Removing excavated materials to a distance not exc 50 m and depositing where directed at level n exc 1.5 above the starting points, complete all as specified and as directed .

Material and Labour for Fine and dry sand cushioning for underground cable by providing a layers of sand 8cm deep before laying and 15cm deep after laying the cable including tretching the cable, complete all as specified and as directed . Note - Punned thickness of sand layer shall be measured and paid to contractor.

Material and labour for sub class brick laid dry width wise across the cable in trenches for protection of cable complete all as specified.

Supply and laying in trenches XLPE insulated , screened, PVC bedded, galvanised steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor of size 35 Sq mm 3.5 core, complete, all as specified and as directed.

Supplying and fixing light grade GI tubing of size 40 mm dia for cable protection and fixed with clamp to pole and wall with nut bolt complete, all as specified and as directed.

Taking out old earthing complete and taking out old unserviceable earthing material and provision of new earthing complete with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire protected by galvanized steel pipe 15mm dia (light grade) and connected to main switch or main control board all as shown in electrical plate No.3 of SSR Part-I & including necessary excavation and earth work. The rate also include charcoal & salt in alternate layers, 20mm dia GI pipe (light grade) for watering, protection pipe, funnel, wire mesh, RCC cover etc. complete, all as specified or indicated including testing on completion. Note : The rates for earth work in any type of soil, returning filling and removal, GI protection pipe, funnel, wire wesh, RCC cover, etc shall be deemed to be including in quoted rates. RCC cover shall be 50mm thick in 1:2:4 type B-1 using 8mm bars @10cm c/c both way.

Material and labour for sub main wiring with two single core flame retardant low smoke (FRLS) , PVC insulated unsheathed copper conductor cable 4.00 sqmm drawn through and including medium grade , ISI marked PVC casing caping not less than 32 mm width , 10 mm depth with accessories fixed on wall/ceiling surface with one additional PVC insulated , stranded copper conductor flame retardant low smoke (FRLS) of 2.5 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring complete, all as specified and directed. Note- 2 run of 4.00 sqmm and 1 run of 2.50 sqmm cable with casing caping shall be measured as 1 unit.

Note:- Amount of credit of Rs. 1,94,570.00 for retrieved materials as mentioned in Schedule of Credit Page No 39. of tender documents in pdf form which will be deducted offline while acceptance of tender.

M/S Tajamul Ah Buchh