ADDITION/ALTERATION AND SPECIAL REAPIRS TO BLDG NO 409 AT NAVAL STATION KARANJA

Amount

Dismantling floor hearth or wall (ceramic/mosaic) tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6), complete, all as specified and directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting, dados and risers to step etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed in CM(1:6) complete, all as specified and directed.

M&L for vetrified ceramic tiles dark shade 10mm thick (square/rectangular) polished area of each tiles not exc 0.36Sqm in floors set and joined in neat cement slurry and pointed in white or .coloured cement to match and incl 15mm thick CM 1:6 screed bed or bedding layer of mortar for laying floor finishes complete all as specified and directed

M&L for vetrified ceramic tiles dark shade 10mm thick (square/rectangular) polished area of each tiles not exc 0.36Sqm on vertical surfaces such as skirting, dados and risers to steps etc. and pointed in white or coloured cement and incl 10mm thick CM 1:4 screed bed or bedding layer of mortar for backing coat of wall tiles complete all as specified and directed

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6), complete, all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick plaster in CM(1:4) on fair face of brick or concrete surface, complete, all as specified and directed.

Demolition of Stone slabs & tiles of any description or thickness in floors, aprons etc. Laid, bedded & pointed in any mortar

M&L 16-18mm thick Granite (of any type and approved colour ) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:4), complete all as specified and directed.

M&L rounding to edges of any type stone slabs one edge, such as in steps, cooking platform, and other similar situations.

M&L machine cut and machine polished cudappah stone slab 20-25mm thick over cement screed base, laid and jointed as in flooring with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick Screed in CM (1:4),complete, all as specified and directed.

Taking down & Removing to Store Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)

S&F 19mm thick marine ply with laminated sheet one side with decorative choice laminations & other balancing white lamination, as in kitchen cabinet/wardrob shutter/shelf/loft shutter etc including beading on edges. Make of Plywood :- :(i) Kitply; (ii) Indian Plywood Mfg Co. ; (iii) Anchor Marine ply (iv) Centuary

S&F aluminium anodised 2 way track for cup boards/wardrobs incl wheel for sliding of shutter and all necessary fittings.

S&F 150mm stainless steel decorative type handle for cupboards/wardrobs.

S&F Brass Locks 4 levers, cupboards/wardrobs/drawers, grade I, size 65 mm

S&F Aluminium anodised Tubular towel rail 20mm dia for cup boards/wardrobs incl brackets and all necessary fittings etc.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet reinforced with M.S Square tube, in opening as per specification & drawing

S&F with wood free EPS factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.

S&F Aluminium handles 125mm size, cast type, anodised

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section.

S&F 75mm butt hinges stainless steel complete all as specified and directed by EIC.

Taking down & Removing to Store Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames)

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and removing to store

Taking down and refixing the shutter exc 1 sqm but nexc 2 sqm including easing & adjusting and also refixing the builder hardware in same shutter.

S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M & L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old of any description and girth, not otherwise described and treated with tar or coal tar black paint.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, hold fast, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in CM(1:4) with joints to match. Complete all as specified and directed.”

S&F MS hold fast similar small articles confirming to Fe 290 Gde -E- 165.

S&F 40 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete, all as specified and directed.

S&F 2nd class hardwood 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats, complete, all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

S&F Aluminium handles 150mm size, cast type, anodised

S&F overall length of cover plate 150mm long Floor door stopper of aluminium alloy body & tongue, anodised, with hard drawn steel spring fixed in floor.

S&F 100mm butt hinges stainless steel complete all as specified and directed by EIC.

S & F night latch 7 lever Godrej brass locking mechanism steel body with scratch resistant powder coated finish of size 98mm x 67mm x 28mm as in repairs all as specified and directed.

S&F in repair magic eye incl all necessary fittings.

Taking up or down steel tubing & connections, including cleaning for re-fixing or removal to store of 15mm bore

Taking up or down steel tubing & connections, including cleaning for re-fixing or removal to store of 20mm bore

S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore, complete, all as specified and directed.

S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore, complete, all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall

S&F in repairs CP Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type

S&F in repair Stop valves 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions

S & F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type), complete all as specified and directed.

S&F in repairs flexible jet shower, 25mm dia including CP flexible pipe 1.20m long heavy duty and hook incl all necessary fittings complete all as specified and directed by Engineer-in-Charge.

S&F in repair toilet paper holder, brass chromium plated, fixed to walls with chromium plated brass screws. Complete all as specified and as directed.

S&F in repair soap dish, chromium plated, fixed to plugs with chromium plated brass screws. Complete all as specfied and as directed.

S&F in repair sheet glass shelf assemble consisiting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard railing 60cm long. Complete all as specified and as directed.

S&F in repar Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed in repairs complete all as specified

S & F in repair drapery rod powder coated 25mm internal dia with bracket incl decorative brass end knob etc and fixed on wall. Complete all as specified and directed

S&F in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S&F in repairs 32mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

S & F in repairs stainless steel kitchen plate rack of size 1 mm thick (18 gauge) complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets

S & F in repair wash hand basin brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed. complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm

S&F in repairs PVC looking mirror cabinet complete all as specified and directed.

S&F in repairs Brass CP shower rose 125mm size

S&F in repair Cast iron floor trap 50mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F in repair Cast iron Nahani trap 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F aluminium door/ window/ventilator/partition shutters, made out of extruded power coated aluminium sections weighing 0.55kg/m, with sliding or openable shutters including frame and necessary joining cleats, glazing clips, rubber packing, power coated aluminium snap beading, screws etc. Complete and also including the following powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hook & eyes, peg stay and handles connected items wtih and including, complete all as specified and directed. Taking down existing old door/window/ventilator/partions and removing to stores. Notes:- (i) Minimum thickness of powder coating shall be 15 micron for widows and 25 microns for doors. (ii) Rubber beading shall be measured and paid for separately. (iii) Design of door, window and ventilator shutters and sections to be used in their fabrications shall be as approved by the Engineer-in-Charge/GE.

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square but exc 0.5 sq.m in each pane

S&F frosted glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane

S&F rubber beading suitable for fixing 4mm/5mm thick glass in panels of aluminium doors/windows/ventilators. Complete all as specified and directed.

S&F aluminium louvers with levers and locking arrangement suitable for fixing 100mm wide glass complete all as specified and directed.

S&F star lock for window incl all necessary fittings complete all as specified and as directed.

S&F in repair aluminium (anodized) grill of design DG 104 pattern, made out of 10mm thick dia, rod fixed with and inclding standard aluminium frame of 'F' section of size 23.40mm x 15.30mm and 1.4mm thick all as per manufacturers instructions and as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples

S&F in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples

S&F Continuous (piano) hinges, Brass, bright finish or electrogalvanised with width of flaps (When open) 30 mm

S&F Brass knobs 35-40mm dia

S&F magnetic catch including all fittings.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L 20mm thick cement plaster (1:6) on other than fair faces of brick work or concrete surfaces, finshed even and fair, complete, all as specifed and directed.

M & L rendering 5 mm thick in cm 1: 3 on concrete surfaces as in ceiling finished even and smooth without using extra cement, complete, all as specifed and directed.

M & L rendering 15 mm thick in cm 1:6 on fair faces of brick/stone masonry finished even and smooth without using extra cement, complete, all as specifed and directed.

M & L rendering 10 mm thick in cm 1:4 on concrete surfaces such as chajjas using water proofing compound @ 3% by weight of cement finishing even and smooth without using extra cement, complete, all as specifed and directed.

Supply only water proofing compound

M & L for preparation of new/old distempered surfaces of walls including washing, rubbing down and stopping of nail holes and applying two finishing coat of oil bound distemper (oil emulsion) on walls, incl 3mm thick wall care putty. complete all as specified and directed.

M & L for preparation of new/old plastered or unplastered surfaces of ceilings including cornices, etc and applying three finishing coat of white wash complete all as specified and directed.

M & L for exterior wall decorating and water proofing treatment to wall surface by wire brushing in order to remove dust, dirt, loose particles, laitance. Thereafter wash the surface with clan water & allow to dry. Fill visible cracks/ joints by chemistic crack seal caulking compound & allow to dry for 24 hours. Apply a primer coat of chemistic prime M Seal (water base primer) and allow to dry for 6 hours. Thereafter apply 02 coats of chemistik PDS-50 (WB high build anti caronatin coating cum waterproofing) & shade by brush at the interval of 08 hours between the coat and allow to dry to match the existing shade including necessary scaffolding for any height, covering etc complete all as per specified and directed.

Taking down 110mm pipe any type incl all fittings and removing , complete, all as directed.

Taking down 75mm pipe any type incl all fittings and removing , complete, all as directed.

S&F 100mm dia cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed in wall, complete all as per specified and directed. .

S&F 75mm dia cast iron soil, waste and vent pipes in any length with or without ears, with cement joints fixed in wall, complete all as per specified and directed.

S&F 100mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stay, including bolts and nuts and securing ends of stay to wall or roof, complete all as per specified and directed.

S&F 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stay, including bolts and nuts and securing ends of stay to wall or roof.

S&F CI bends 100 mm dia with oval access doors

S&F CI branch pieces single (equal or unequal) ordinary or inverted (spigot or socket type) or with parrellel branches with oval access door 100 mm dia.

S&F Cast iron 75mm bore Branch pieces, single (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches

S&F Cast iron 100mm bore Branch pieces, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches

S&F Cast iron 75mm bore Branch pieces, double (equal or unqual), ordinary or inverted (spigot or socket type) or with parallel branches

S&F Cast iron 75mm bore Bends (any radius) with duck's foot or heel rest

S&F Cast iron 100mm bore Bends (any radius) with duck's foot or heel rest

S&F Cast iron 75mm bore Sockets (double, collars)

S&F Cast iron 100mm bore Sockets (double, collars)

S&F Cast iron 75mm bore cowls

S&F Cast iron 100mm bore cowls

Demolition of cement concrete of any description in any position, concrete filling in sunken floor.

M & L PCC 1:7:12 type F 2 with bricks as in filling of sunken slab after laying carrying out required tests for CI pipes joints WPT,complete all as per specified and directed.

Roughening surfaces of old concrete by sweepping clean and washing down with water to remove dust

M&L for 15mm thick rendering in in fair faces of brickwork CM 1:3 with finishing the surfaces even and smooth without using extra cement, complete all as per specified and directed.

M&L for cement concrete type B0 using 12.5 mm graded aggregate in sunken floors 30mm thick complete all as specified and directed.

M&L for applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical surfaces and floor of sunken slab after laying all CI connection branch pieces etc after covering joints with PCC 1:2:4 mixed with WPC.

S&F in repairs Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern & flush pipe), complete all as per specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) incl all fittings.

Dismantling water tanks and removing to store exc 1000ltr and nexc 2000 ltrs.

M&L for Rotational moulded polyethylene water storage tanks 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

S& F for 20mm bore dia of pipe Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position. (Cleaning repairing etc. measured separately).exc 1000 & n exc 2000 litres

Cleaning & removing all scale & dirt, etc. from tanks & form mouths of circulating pipes, etc.exc 1000 & n exc 2000 litres

Removal of existing water proofing treatment any description up to concrete surface of roof slab including cleaning, with wire brushing, watering, removal of debris upto 1500 m distance complete all as specified and directed NOTE :- Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work

M & L for 20 mm thick screed bed or bedding layer of mortar in cement mortar (1:4) for laying roof finish as padding finished with WPC 2% by weight of total cement, complete all as specified and directed NOTE :- Integral WPC shall be measured and paid separately under relevant items of this schedule.

M & L for cleaning and applying water proofing treatment with super thermo layer as specified below. (i) Apply oil bound bitumen primer @ 0.40 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface. (ii) Laying torch applied APP polymer modified membrane 4 mm thick with non-wooven polyster mat as reinforcement weighing n. less than 4.50 Kg/Sqm with white gravel / mineral finished by thermo fusion process all as described under particular specification. (iii) Provide two coats of solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm over membrane surface. The APP membrane shall be one of the following make and the material for the entire work shall be brought from one manufacture only :- (a) M/s Taxsa India Ltd Mumbai - 'MOPLY FP' or (b) M/s Chemical Adhesive (P) Ltd - 'Chemistic' or (c) M/s STP - 'Super Thermolay' or (d) M/s percept Engrs Pvt Ltd, Kochi-PLOYPLUS

Chipping , removing carefullly concrete work by low impact hammer, breakar without damaging the structure & cleaning and disposal of debries out side the premises etc. complete all as directed. (Hard concrete should not be removed by force).

M & L for Carrying out application of ‘Bi-polar migratory corrosion inhibitor' EPCO-KP-100 on concrete surface. This inhibitor has migratory kind of property which permits the material to migrate to a virtual extent of 100 mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It has property to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete.

M&L for Cleaning existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Piddilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd. on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry.

M&L for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. Works shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the carck with a liberal application of the epoxy putty.

M&L for Injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (approved make) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency , Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. Make / brand of Epoxy grout - Dr. Fixit Epoxy injection or EPCO KP-HP-250 of M/s Krishna Conchem or Shaligrout EI of STP Ltd.

M&L Injecting low viscosity (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including, Mixing of materialas: Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching. Grouting:Fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100. Maintain desired pressure in the gun by air compressor; maintain the pressureat exit (2 to 3kg/cm2) by monitoring pressure guage at exit. Grout the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles.

M & L in replacement of corroded steel reinforcement with new/fresh reinforcement complete all as specified & as directed by Engineer-in-charge. (Note: Replacement of corroded steel reinforcement to be undertaken when 20% of cross section is reduce due to corrosion)

M & L for anticorrosive Treatment to Reinforcement by application of two coats of IPNET RB (CBRI Know how) by brush on exposed reinforcement with time interval of minimum 4 hours between each coat all as specified and directed.

M&L Providing and applying structural grade epoxy-latex bond coat prior to application of any type of mortar confirming to ASTM-C- 882-91 (Arizona Slant Shear Test) to ensure bond between old concrete & new concrete by brush application all as specified and directed.

M&L Building up the profile of structural members by using latex B2 modified air cured mortar system in damaged areas (1Cement- 3 part graded cleaned pre-packed river sand- 5 to 10% latex mortar by weight of cement- 0.35% w/c ratio) in 20 mm thickness including leveling profiling etc. complete all as specified and directed.

Providing and applying jacketing around columns with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete.Note: Reinforcement shall be measured and paid separately.(Rates including jacketing, formwork and micro concrete) all as per manufacturer's instruction and as directed by the Engineer-in-Charge.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced)

M&L 100mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete, all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165

M & L for applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer, complete, all as specified and directed

M & L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.

M& L for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome

M & L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface.

S&F hand rail cover of PVC nexc 100mm in width.

S & F loft type water storage tank ISI marked of capacity 250 ltrs hoisted and fixed in position including ball brass valves of 15mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 15mm bore GI tube etc complete all as specified and directed including taking down old tank. Make:- Sintex / Infra / Polycon / Rotex

Dismantling boarding, any description, fixed in any position with screws

Taking down carefully copper / aluminium point wiring (light, fan socket or power) through steel / PVC conduit / casing caping including complete fittings such as switches, ceiling roses, pendants, regulators, sockets, buzzer, bell, switch sockets, etc removing and making good to the disturbed surfaces of walls/ceiling etc, with its original specification complete all as specified and directed.

M & L for Point wiring with single core 1100 volts grade 1.5 sqmm size PVC FRLS insulated unsheathed stranded copper conductor cable using color code drawn through conceiled pvc conduit with all modular accessories like metal flush box,cover plate frame plates of suitable sizes Complete all as specified in and including 1.5Sq mm PVC insulated unsheathed copper conductor cable for continous earth conductor (using green colour)to common earth and connecting to earth dolly for the following NOTE- The rates includes for Neccessary wall cutting chasing .

(a) One light /fan/ call bell point controlled by one switch

(b) One 5 pin socket outlet 5 Amps on independent board

(c) One 5 pin socket outlet 5 Amps on same board

(d) One light point controlled by 2 way switch SP, 5 Amp, 240 Volts

Ditto all as per item No 145.00 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 1.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

Ditto all as per item No145.00 above but with 4 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

S & F switch modular single pole one way, 6 Amp (ISI marked) all as complete all as specified and directed by Engineer-in-Charge

S & F modular switch flush button, single pole two way, 6 Amp (ISI marked) complete all as specified and directed by Engineer-in-Charge

S & F modular bell push flush type 6Amp (ISI marked) all as specified and directed Engineer-in-Charge.

S & F modular socket outlet 15 Amp, 5-in-1, controlled by one switch (ISI marked) complete all as specified and directed by Engineer-in-Charge.

S & F modular socket 2 in 1, 3 pin, 6 Amp flush type (ISI marked) complete all as specified and directed by Engineer-in-Charge.

S & F switch modular single pole one way,16 Amp (ISI marked) all as complete all as specified and directed by Engineer-in-Charge

S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals

S & F ding dong door bell electric suitable for AC 230 volt, single pole complete all as specified and directed by Engineer-in-Charge.

S & F modular type fan 5 step regulator for ceiling fan complete all as specified and directed by Engineer-in-Charge.

Supply and fix LED batten with 24W LED tube light in wall/surface connecting with all required accessories like PVC box base,flexible cable from ceiling rose etc Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver and including LED tube rod.as directed and specified by engr-in-charge.Make havells CT PT NO- LHEDAAP7PW1W024 or equivalent in CG/C&S

Supply and fix LED batten with LED tube light in wall/surface connecting with all required accessories like flexible cable from ceiling rose etc as directed and specified by engr-in-charge.Make C&S ct pt no-LTTB2F10WLED/W 10W 2 FT WHITE including LED tube rod or equivalent in CG/HAVELLS/bajaj

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 2+6 way double door open able, including taking out old unsv MCB DB any size/type.

S&F 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series)

S&F MCB double pole RCBO 240 volts AC 32 to 63Amps (C-series) OF 30MA as per requirement of AMP directed by engr-in-charge

M&L for wiring for circuits/sub main wiring with FRLS PVC insulate sheathed 2 x 6 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into PVC conduit with 4 sqmm PVC insulated green copper cable for continues earth PVC pipe not less than 25 mm dia with all accessories complete

Taking down exhaust fan and keeping in safe custody for reuse and refixing the same after duly painted and marking of MES number on fan complete with connected accessories as directed and specified by engr-in-charge .

Supply and fixing NON METALIC exhaust fan single phase 250mm sweep Make-Ventil Air DXWHT/BLK. including connected accessories and making necessary cutting and chasing to make holes on wall to fix the fans as directed and specified by Engr-in-charge.

Taking down ceiling fan and keeping in safe custody for reuse and refixing the same after duly painted and marking of MES number on ceiling fan of size 1200mm sweep complete with connected accessories as directed and specified by engr-in-charge .make-havells

Taking down geyser and keeping in safe custody for reuse and refixing the samed after duly painted and marking of MES number on geyser 25ltr including all connected accessories like pvc connection hot/cold water etc all as directed and specified by Engr-in-charge

Supply and fixing LED building security light fitting with suitable size bracket/angle to fit security light of 45w IP 66 protection LED make bajaj ct pt no-BRTFG 45 Watt

Supply and fix LED decorative wall mounting chrome finish fixture with textured glass with 5 w led lamp MAKE-HAVELLS ct pt no-LHFOFDC1TZ1C040 or equivalent in bajaj/CG

Supply and fix sheet metal enclosure with socket plug top and 20 amp single pole MCB complete all as specified and directed .

Mahadev Enterprises

Sagar Electricals