Prov Improved Access W/s scheme Inna Khera

Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone boulders, Kankar and building rubbish, Earth. (300) 0-300.0 km

Providing and fixing asbestos cement rain water pipe 100mm dia with M.S. holder and clamps fixed on

Providing and fixing asbestos shoe for asbestos cement rain water pipe in position.

Providing and fixing cast iron head for rain water pipe on wooden plugs fixed on wall face including

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement

Bottom khurra on ground 1.2m 0.6m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm

Cement pointing 1:2 flush on flat brick flooring

Extra for 4 mm thick Cement plaster 1:4 Complete

25mm thick mud plaster Complete in all respect

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage, cost of rubber ring. (A) D.I. Pipe as per IS 8329 DI-K7 (c) 150mm i/d pipe lines laid complete

Extra for fixing of double flanged pipes in vertical position for over head reservoir & stand pipes, scaffolding, derricks, Jim poles, tools and plants, ropes, guys, etc. Complete as desired by Engineer-in-Charge. (d) 150mm i/d pipe lines laid complete

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (vi) 200mm o/d pipe of 10 Kgf. / sqcm

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge). (A) Class PN-1 as per ISI (a) 80mm i/d Sluice Valves flanged

(b) 100mm i/d Sluice Valves flanged

(c) 150mm i/d Sluice Valves flanged

Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below:- (a) Top Layer:Top layer:----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source.

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. (b) Size 0.9 m. x 0.9 m.

First class flat brick paving or flooring laid over and in cement sand mortar 1:5 in ordinary bonded courses or in herring bone or other special courses, to templates, over dressed foundation and to correct longitudinal and cross slopes as shall be required by the Engineer-in-charge. All joints shall be filled with mortar and struck flushed as the work proceeds.

Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS: 12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm (for EHD and HD). (A) RCC Man hole cover with Frame (a) 560mm i/d RCC man hole cover with frame as per ISI (iii) Medium duty

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16/20Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- (i) b) Wiring fan point (With fan box)

(ii) Wiring light point

(v) Wiring 6Amp. Plug control comprising wall socket point

Providing and Laying 250 Micron LDPE Film in S/S Tank complete in all respect. (As per approval of Engineer-in-charge)

Providing & Fixing Floating arm 250 mm i/d 2.00 Mtr long Complete in all respect. (As per approval of Engineer-in-charge)

Improvement of Existing Water Connection Complete in all respect as desired by Engineer-in- charge

Repair of Sluice Valve Houdi Size 0.90x0.90 Mtr Complte in all respect. (As per analysis)

Providing & Fixing electric fan & regulator etc. (ISI Marked)

Providing & Fixing CFL Bulb complete in all respect.

Providing & fixing CFL Tube Light Complete in all respect.

Providing, installing, testing & commissioning one no. Electrically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleaching powder solution/ sodium hypo solution per hour under maximum delivering pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification.

Charge Line for Raw Water Motor including 500 Ltr PVC Tank Complete in all respect.

Taking out filter Media (Top layer) Washing, Screening & Placing the same in CTP complete in all respect.

Taking out filter Media (2nd to 5th layer) Washing, Screening & Placing the same in CTP complete in all respect.

Taking out False floor slabs out side filter bed, washing cleaning mud with brush and placing the same in filter bed in original condition complete in all respect

Converting lift into horizontal lead:- For converting lift into horizontal lead, the lift upto 3.60 metres will be multiplied by 10, from 3.60 metres to 6.0 metres it will be 50% of qty. as obtained from 0 to 3.60 mtr multiplied with 10 beyond 6.0 metres it will be multiplied by 20. No cross leads what-so-ever shall be measured and paid for. Vertical lead = Top level of Filter bed- Av. GL of W/W = x 10 = Mtr Vertical lead = 102.25 - 99.00 = 3.25 x 10 = 32.50 Mtr

Repair of Clear Water Tank Leakage Complete in all respect. (as per analysis)

Repair of Pannel Board for 3.00 BHP motor complete in all respect. (as per analysis)

Repair of Raw Water Motor for 5.00 BHP motor complete in all respect. (as per analysis)

Providing, Laying, Fixing & jointing of P.V.C. pipes as per ISI- 4985 (ISI Marked with the prior approval of Engineer-in-charge)along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (Machnically) with Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade,cutting joint holes,refilling consolidation, watering,including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching,fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect (Machnically) & Supplying,fixing & jointing of PVC /HDPE pipes's specials complete as desired by Engineer-in-charge. A) For pipe line laid inside habitation 5% extra will be taken for the respective i/d of pipe

Providing household connection with laying,jointing,fixing testing GI pipes B-Class (Jindal Make) (as approved by Engineer-in-charge),including cost of Excavation,Refilling 15 mm o/d GI pipe B-Class (Jindal Make) 4.50m(length on average basis).3"i/d PVC clamp,G.M ferrule ISI Marked, connection of 15mm i/d ferrule medium .Specials such as tees,bends,sockets, elbows , nipples(100 mm & 150 mm),Union Couplings,GI hooks etc.and gun metal peet valve (heavy pattern)with hand wheels on GI pipe B-Class (Jindal Make) Lines laid in the ground or inside buildings Cutting,Threading,Making hole in wall and testing in trenches in the ground All material Should be of approved make (to the approval of Engineer-in-charge) Complete job in all respect including cost of carriage. (Refer CSR item nos. 28.1,28.34b,,30.65,)

SHA CONSTRUCTION COMPANY