SITC OF UNDER GROUND HT/ LT CABLE AT SIVAGIRI SREE NARAYANA GURU ASHRAM AT KERALA

Amount

SITC of 11 KV, 3ph 630A SF6 insulated extensible type RMU (Main Unit) IP 65 with short time rating 20KA for 3 Seconds with add on unit complete in all respect and as per Technical Specification

SITC of 11KV, extensible panel board made out of 14 SWG thik CRCA sheet fully compartmentalised comprising of 630A, 3 phase 50Hz 350 MVA VCB section panel incomer and 630A, 3phase 50Hz, 350 MVA breaking capacity VCB's as outgoing complete in all respect and as per Technical Specification

SITC of 1000 KVA USS Substation Indoor Unitised Substation consist of 11/0.433KV, 350 MVA, 3 Phase, Dyn11, AN, Dry type Class H suitable for indoor application and 11 KV, 630A, 26.2KA Load Break Switch Panel with all other accessories complete in all respect and as per Technical Specification

Dismantling of Existing Overhead cables HT/LT both side Sub-station and plant room etc. as reqd.

Supplying of 3 X 300 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 11 KV as required as per Technical Specification.

Supplying of 3 X 150 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 11 KV as required as per Technical Specification.

supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core,XLPE aluminium conductor cable of 11 KV grade as required 300 Sq mm

supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 120 Sq mm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core,XLPE aluminium conductor cable of 11 KV grade as required :300 Sq mm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :120 sq mm

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. complete in all respect and as per Technical Specification

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. complete in all respect and as per Technical Specification

Above 120 sq. mm and upto 400 sq. mm

Supplying of 3.5 X 400 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 3.5 X 240 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 3.5 X 185 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 3.5 X 150 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 3.5 X 120 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 3.5 X 95 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 3.5 X 70 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 3.5 X 50 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 4x25 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 4x16 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 4x10 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 4x6 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 2x6 Sq mm PVC insulated Al. armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 6x2.5 Sq mm PVC insulated CU armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying of 4x2.5 Sq mm PVC insulated CU armored conductor PVC insulated and PVC sheathed /XLPE cable of 1.1 KV as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. complete in all respect and as per Technical Specification

3½ X 400 sq. mm (82mm)

3½ X 240 sq. mm (62mm)

3½ X 185 sq. mm (57mm)

3½ X 150 sq. mm (50mm)

3½ X 120 sq. mm (45mm)

3½ X 95 sq. mm (45mm)

3½ X 70 sq. mm (38mm)

3½ X 50 sq. mm (35mm)

4 X 10 sq. mm (25mm)

4 X 16 sq. mm (28mm)

4 X 25 sq. mm (28mm)

2 X 6 sq. mm (19mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. complete in all respect and as per Technical Specification

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Above 185 sq. mm and upto 400 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 X 400 sq. mm (clamped with 40x3mm MS flat clamp) size on wall surface as required as per technical Specification

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 X 400 sq. mm (clamped with 40x3mm MS flat clamp)size on cable tray as required as per technical Specification

Supplying and installing 900 mm width X 62.5 mm depth X 2.0 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. complete in all respect and as per Technical Specification

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. complete in all respect and as per Technical Specification

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. complete in all respect and as per Technical Specification

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. complete in all respect and as per Technical Specification

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. complete in all respect and as per Technical Specification

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. complete in all respect and as per Technical Specification

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc.,complete in all respect and as per Technical Specification

63 mm dia (OD-63 mm & ID-51 mm nominal)

90 mm dia (OD-90 mm & ID-76 mm nominal)

SITC Feeder Pillar box for External yard Free Standing Glass Fibre reinforced polyester 1K10, IP66 double door insulated feeder pillar box with IP 54(Dust & Water proof) FEEDER PILLAR made of high quality GRP(Glass Fibre Reinforced Polyster i.e. Polyster +Glass Fibre), Lockable, Characterized with resistant to atmospheric (UV), double insulated , slow burning & self-extinguishing in nature in accordance with IFC 60 695. The System should hold Type Test Certificates in accordance with IEC 60 439-1,IEC60439-3, IEC 60439-5 and EN 60 208 , strength IK-10, Size- min 850 X590 X 470(H X W X D mm) Base min 950 mm complete in all respect and as per Technical Specification

SITC of VERTICAL DISTRIBUTION BOARDS 8 WAY VDBs with all required switches and accessories Material- Thermoplastic Polycarbonate, Degree of Protection- IP 66, Installation- Protected Outdoor installation and Harsh Environment, UV resistance, Burning Behaviour- Flame- retardant and Self Extinguishing, Glow wire test at 960 C, Toxicity- Silicone and halogene free Incoming for MCCB up to 125A Outgoing:- SP/TP MCB up to 63 A Door- Transparent Hinged door Modules- 8+24 (8 Ways) PE and N Terminals:- Per PE/N 1 x 6-5 Sq. mm, 16 x 1.5- 16 Sq. mm Cu Flanges with integrated Earthing Plate Door Fastener with tool operation Mechanical strength- High impact resistance (IK 08-5 Joule) Dimension in mm- 546 X 820 X 163 mm with all switchgears and accessories as per site requirement and as per Technical Specification

Lightning Protection System: SITC of Lightning protection system. :- single spike air terminals of 10/16 mm dia. & 1500 mm length as required and as per site conditions. The air terminal shall be manufactured with aluminium & shall be as per IEC 62561-2. (7-N0's) 8 mm dia aluminium round conductor -1700 RM . Parapet/Wall Conductor holder- 1700 No's. Bridging cable-8No's. Straight and T connector- 120 No's. Test Clamp 8- No's. Expension Piece- 20No's. copper-bonded rod of 10 feet length,14.2 mm dia. (Minimum copper bonding shall be 0.25mm) as per IS 3043, IEEE-80, NBC 2016 along with Rod-to-Conductor connectors, Earth enhancement material some with resistivity of 0.12 ohm-mtr, and complying IEC 62561-7 and Pit Cover complying IEC 62561-5- 8No's 8mm Copper Bonded Steel Conductor laid at 600mm below the ground, 400 RM. complete in all respect and as per Technical Specification

Supply, installation, testing and commissioning of 125 kVA DG set (as per CPEB-2 norms) with AMF panel and necessary equipments, acoustic enclosure, civil foundations and all other accessories as per technical specifications, scope of work given elsewhere in the NIT. complete in all respect and as per Technical Specification

D & G Construction

Naagar Infrastructure Pvt Ltd

Geresh Electricals Private Limited