Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.2 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹31.7 L+₹2.5 L (8.56%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
Refer Docs
EMD Value
₹69,000
Closing Date
28 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MH AND RH KIRKEE
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Kirkee Pune 411003
SPL REPAIR TO BLDG NO T32 PROVN OF TOILET CUM BATHROOM AT FIRING RANGE FOR GUARD OF 12 MAHAR AT AUNDH AND PROVN OF VIEW CUTTER AT FALG STAFF HOUSE BLDG NO T3 OF HQ 330 INF BDE AT AUNDH UNDER GE MH AND RH KIRKEE
2023_MES_572579_1
8340/E8
Open Tender
Civil Works
Item Rate
180 days
GE MH AND RH KIRKEE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MH AND RH KIRKEE
₹69,000
7 Mar 2023
2 Jan 2023
30 Jan 2023
2 Jan 2023
28 Jan 2023
16 Jan 2023
2 Jan 2023 - 21 Jan 2023
Amount
Dismantling plain or corrugated asbestos sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Dismantling wrought iron or mild steel of any description not otherwise provided for complete all as specified and directed
Dismantling wall and ceiling boards ( fibre, pulp, insulation, etc ) or insulation boards/ slabs/ blankets, any thickness, including cover fillets.
S & F hot rolled medium and high tensile structural steel of grade E 250 quality C conforming to IS 2062: 2011 as in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws including dismantling old roof sheet of CGI/PGI complete all as specified.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in cladding to wall, fixed with self tapping screws including dismantling old roof sheet of CGI/PGI complete all as specified.
M&L for Gypsum board false ceiling with 10 mm thick and 2400X1200mm size Gypsum board tiles fixed with machine screws on 0.5 mm thick grid work, main joist made out of GI, C-channel 40mm wide, piaced at 900mm to 1200mm c/c & secondary joist made out of 50mm wide flat GI at 600mm C/C with GI angle of 25X25X0.25 mm suspenders from ceiling to the grid at 750mm C/C, tiles and joints shall be finished with gypsum plaster to achieve smooth surfaces complete all as per manufacturers specification including two coats of oil bound distemper over one coat of alkali resistant primer all as directed.
S&F POP Decorative cornice 100 mm size of approved design and pattern fixed along wall and ceiling junction, all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding/ complete and removing rubbish off the premises complete all as specified and directed.
M&L Coloured Vitrified tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:4 all as directed.
All as per item No. 10 above but as in skirting /dados over and including 10mm thick rendering as in backing coat in CM 1:4 complete all as specified and directed.
M&L Non skid ceramic colour tiles 7 to 8mm thick (square /rectangular ) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm in floors etc in neat cement slurry and pointed in white or Coloured cement to match over and including 15mm thick in CM 1:4 screed bed or bedding layer of mortar for laying floor finishes
M&L for glazed ceramic coloured tiles (350 x 250 mm/450x300) x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick as in backing coat in cement mortar 1:4 complete all as specified.
Demolition Brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles.
M&L for Pre-cast cement concrete 1:3:6 type C-1(using 20mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar1:4 , complete all as specified and directed.
Taking down cement or cement lime plaster on brick or stone walls,ceilings etc. including raking out joints, hacking for key, scrubbing down with water etccomplete all as specified and directed.
M&L rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work or concrete surface in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
M&L for preparation newly plastered surfaces of walls/ceilings and applying two coats of weather proof acrylic exerior paint (100%) Acrylic) over one coat of self primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified.
M&L for complete removal of existing treatment of old surfaces and applying two coats of weather proof acrylic exterior paint (100%) Acrylic) over one coat of self primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and directed by Engr-in-Charge.
M & L for 10 mm thick plastering in cement mortar 1:6 on fair faces of brick or concrete surfaces of walls including finishing the surfaces with a thin layer of sagol finish not less than 1mm thick ( upto any height) complete all as specified and directed.
M & L for preparation of new plastered surfaces and applying two coats of oil bound distemeper over a coat of alkali resistant primer over a coat of wall care putty not less than 1mm thick on plastered surface complete all as specified and directed.
M&L for complete removal of existing finishes and applying two coats of oil bound distemper on walls over a coat of alkali resistant primer including a coat of wall care putty not less than 1mm thick preparation of old surfaces on plastered surfaces prepratary to distempering all as specified.
M&L for preparation of new undecorated surface of wall and applying three coats of white wash on wall complete all as specified in SSR part-I (2009) and as directed.
M& L for complete removal of existing finishes and applying two coats of white wash on walls including preparation of old surfaces all as specified and directed.
Demolition of old stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded and pointed in any mortar complete all as specified and directed.
M&L for Granite slab 18-20 mm thk machine cut bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade including cutting with polshing, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 all as directed.
All as per item No 26 above here in before but in skirting over & including 10 mm thick rendering CM 1:4 rendering complete all as specified and directed.
All as per item No 26 above here in before but 20 mm thick Machine cut Cudappah stone in floor or in any position of any colour and shape as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and another similar situations.
Cutting holes in existing wall or PCC Block masonry built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete M-15 grade (nominal mix) as required depth of embedded portion of holdfast or lugs measured from the face of jamb into the wall exceeding half brick but not exceeding one brick all as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5sqm but not exceeding 4 sqm all as directed.
S&F 105 x 60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge.
S&F 125 x 60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge.
M&L for PCC M-10 grade (nominal mix) using 12.50mm graded stone aggregrate as in coping hold fast block bed block filling pressed steel door frame etc all as specified.
S & F 30mm thick flush shutters, solid core construction with block boards core and plywood face panels, commercial type on both sides all as specified
M&L for 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified.
M&L for 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified.
S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to steel window with nut bolt complete all as specified and directed.
M&L painting to wooden surfaces of any description over 10 cm width or girth incl prepration of new or untreated surface and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified.
M&L for preparation of old wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
S & F 150 mm size extruded aluminium alloy handles, fabricated type anodised all as directed.
S & F 200mm Aluminium anodised barrel tower bolts of extruded section and fixed
S & F aluminium alloy , anodised , sliding door bolt with hasp , staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed length of bolt 250 mm all as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm all as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing
S&F 100 mm Stainless steel butt hinges medium weight, cold rolled all as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails, M.S.frame shall be covered with heat mouldedplain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent ceament, supplying & fixing in the frame at site as per specification & drawing
S & F 125 mm size extruded aluminium alloy handles, fabricated type anodised all as directed.
S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 150mm all as directed.
S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or ri-veted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0.
S & F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to steel window with nut bolt complete.
M&L for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ( 1st quality ) over a coat of red oxide primer complete all as specified and as directed.
M&L for preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-Charge.
S&F powder coated (Powder coating shall not be less than 50 micron of approved colour) aluminium three track window and ventilator shutters, with frame size 100 x 35 x 1.2 mm and shuter 399.40 x 17.70 x 1.2mm with two glass shutter & one gauze shutter including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings with 4 mm plain float glass gauze fittings etc including taking down existing windows GI mild steel cloth 0.56mm nominal all as specified and directed by Engr-in-Charge. Note : Glass & wire mesh shall be deemed to be incuded under unit rate quoted.
S&F aluminium louvered ventilators of section size 100mm x 25mm x 1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilator all as directed by Engr-in-Charge. Note : Glass & wire mesh shall be deemed to be incuded under unit rate quoted.
S&F in repairs powder coated aluminuium pipe 20 mm dia as in curtain rod fixed to brackets all as specified and directed. Note : Brakets shall be measured and paid separately.
S & F in repairs powder coated aluminium brakets fancy type for curtain rods of 20mm dia, all as specified and directed.
S&F in repairs 150mm length, floor door stopper of aluminium alloy body all as specified and directed.
S&F in repairs 300mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as sepcified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concelaed water tubing or concealed conduit wiring etc. and making good, cutting not exc 10 cm girth complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required or removed from site.
Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
Refixing tubes of 15 mm bore, any grade, to walls and ceiling or laying in floors complete with new fittings complete.
Taking up or down 20 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required or removed from site.
Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
Refixing tubes of 20 mm bore, any grade, to walls and ceiling or laying in floors complete with new fittings complete.
Taking up or down 25 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required or removed from site.
Supplying & fixing to walls and ceiling 25 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
Supply and fix 1000 liters capacity triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete.
S & F in repairs 20mm dia bore Gun metal, globe or gate valves with Iron wheel head, screwed both ends for Iron pipes and fixed.
Supply & fixed in repairs 15mm bore Stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup ( concealed type) screwed down high pressure , screwed both ends for iron pipe or for unions.
Supply & fixed in repairs 15mm bore CP bib taps, cast copper alloy, with capstan heads,chromium plated , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs , CP brass , chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.
S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, seat cover complete, all as specified and directed.
S & F in repairs Plastic seat cover to EWC with aluminium hinging device all as specified and directed.
S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.
S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts, all as specified and directed.
S&F in repairs vitreous china wash hand basin, white of size Thin Rim Table Top Washbasin 550 x 400 x 140 mm oval type or non oval type counter top, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe.
S&F in repairs 15mm bore CP Central Hole Basin Mixer 450 mm long high neck without Popup Waste System with 450mm Long Braided Hoses fittings complete all as specified and directed.
S& F in repairs Soap dish CP size 160 x 160 x 90 mm,fixed to plugs with chromium plated brass screws complete all specified and directed.
S&F in repairs Corner glass shelf with 200mm dia or above with stainless steel hinges and chromium finish holders/wall of approved make complete all as specified and directed by Engineer-in-Charge
S/F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long all as specified and directed.
S&F in repairs Health faucet brass chromium plated (Brass) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook fixing to 15 mm bore of pipe all as specified and directed. Make - Jaguar Model No - ALD-CHR-593N/ F8030301 of Cera /F160002 of Hindware
S&F in repairs 15mm Brass CP wall mixer tap including provision for overhead shower for mixing " Hot or Cold" water screwed down for iron pipe all as directed Make : Jaguar, CAT Part No FUS- 29273UPR / F1014402 of Cera/ F 110018 of Hindware
S&F in repairs two way bib tap 15mm chromium plated Cat No CON-041 KN of M/s Jaquar/Cera CI206/ F330004 of Hindware
S&F in repairs Towel Ring (of approved pattern) complete all as specified and directed.
S&F in repairs tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated all as specified and directed.
Supply & fixed in repairs 100mm x 100mm grating jali with or without hole for waste pipe, chromium plated comple all as specified.
S&F in repair 110 mm bore PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
S&F in repair 75 mm bore PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.
S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified.
S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified.
S&F in repair 75 mm bore cast iron floor trap plain with grating including jointing with solvent cement complete all as specified.
Demolition cement concrete (unreinforced ) in ground floors and pavings n exc 15cm thickness ( below or above ground level )
M&L for 75mm thick PCC M-10 grade (nominal mix) using 20mm graded stone aggregate as in plinth protection/path finishing cement concrete surface even and smooth without using extra cement.
M&L 75mm thick PCC M-7.5 grade (nominal mix) using 40 mm graded stone aggregate as in sub base all as specified.
M&L for Sand filling under floors or in foundation including consolidation. The thickness of sand cushion should not be less than 25mm for laying paver blocks.
M&L for 60mm thick coloured rubburised, glossy finish colour machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-35 Grade incl all as specified and directed by Engineer-in Charge.
Demolition of cement concrete unreinforced of any description and in any position, not otherwise specifically provided for complete all as specified and directed.
M & L for cement concrete M-15 grade (nominal mix), using 12.5mm graded stone aggregates for filleting, benching, slightly rounding or chamfering on edges, filling undulations / depressions in roof surface, providing concrete platform for tanks wherever required as directed.
Taking down / removing existing water proofing treatment from RCC roof slab including removal of plaster bed below felt / membrane and disposing off the premises and providing water proofing plaster on slab average thickness 10mm in CM 1:4 mixing with liquid water proofing compound all as per manufactureres instructions, finished even and smooth without using extra cement all as specified and directed Note : Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to control efflorescence & fungal growth) as approved by GE.
M & L for cleaning the plastered / concrete surface with wire brush and applying APP (Atactic Poly Propylene) bitumen membrane 3mm thick APP modified weight not less than 3.60 Kg/Sqm reinforced with non woven polyester fibre of weight 160 gms/sqm as center core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene, applied by thermo fusion using LPG torch on the bottom portion of the membrane, after applying a coat of bituminous primer 0.40Kg/Sqm over roof ( An overlap of 100mm & 150mm shall be provided on sides and ends respectively ) complete all as per manufacturers instructions.
Dismantling fencing, wire mesh any type complete all as specified and directed by Engr in Charge
Dismantling of RCC post or struts carefully of any section embedded in concrete incl taking out embedded portion and making good disturbed ground incl taking down/out worn out unserviceable old barbed wire, chain link fencing complete.
S&F Mild steel for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0
M&L for PCC M-10 grade (nominal mix) using 40mm graded stone aggregate cement concrete in foundations, filling and mass-concrete all as specified and directed
Supply only galvanized steel chain link fence fabric of mesh any size, made out of 2.50 mm nominal dia of mesh wire complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including cantilever brackets, CP waste coupling and PVC waste pipe overall size of sink 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.
Surface dressing n. exc. 15 cm deep in hard / dense soil complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out in hard / dense soil complete all as specified and directed
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc and getting out in hard rock complete all as specified and directed
M&L for PCC M-7.5 grade (nominal mix) using 40mm graded stone aggregate cement concrete in foundations, filling and mass-concrete all as specified and directed
Returning filling in including spreading, levelling watering and well ramming in layers not exc 25 cm all as specified and directed
Removing excavated material to distance not exc 50m and depositing where as directed at a level not exc 1.5m above the starting point all as specified.
M&L for Hardcore of gauge n exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces.
M & L for 25 mm thick PCC M-15 grade (nominal mix) using 12.5 graded stone aggregate as in base of floors complete all as specified and as directed by Engineer-in-Charge.
M & L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M & L for rendering 10mm thick in CM 1:4 finished even & smooth with but as in ceiling complete all as specified and directed
Supply & Fixing 75 mm long stainless steel butt hinges.
M&L for preparation of new undecorated surface of ceiling and applying three coats of white wash on ceiling complete all as specified in SSR part-I (2009) and as directed.
M&L for RCC M-25 grade (design mix) in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.
M&L for RCC M-25 (Desgin mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
M & L for RCC M-25 (Design Mix) as in chajjas complete all as specified.
M & L for RCC M-25 (Design Mix) as in columns, pillars, piers, post and struts complete all as specified.
M & L for RCC M-25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
All as per Item No 111 here-in-before but 6 to 8mm dia bar.
All as per item No.111 herein before but 5mm dia and over and including 10mm dia in stirrups, spacers and binders.
M & L for steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
M & L for steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and as directed.
M & L for steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed.
M & L for steel formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed.
M & L for steel formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished curved surfaces of concrete complete all as specified and as directed.
M&L 100mm dia CI Nahani trap, with grating including jointing to waste pipe fixed in cement concrete M-15 grade (Nominal mix) using 20mm graded stone aggregate
S & F in Chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union.
S&F in repairs vitreous china wash basin white, flat back of size 450 x 300mm, excluding taps, waste chain & plug & porcelein stopper but including brackets, cutting for and pinning in ends of brackets including waste coupling and waste pipe all as directed Make: CERA/Hindware/Somany
S & F CP, 15mm bore push cock, screwed for iron pipe and fixed all as specified & directed.
S&F in Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) all as specified & directed.
S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete complete including making good to floor.
Supply and fixing PVC connections 15 mm size with PTMT nuts of length 600 mm complete al as specified and directed by Engineer-in-Charge.
S&F for glass shelf assembly with chromium plated brass screw and cup washers all as specified and directed
S&F in repairs 500 Ltrs capacity rotational moulded polyethylene water storage tank white/ green three layered (Cylindrical vertical with close top) hoisted and fixed in position including connections all as specified.
S&F 20mm ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed.
Surface excavation n.exc. 30 cm deep and averaging 15 cm deep and getting out in soft loose soil.
M&L for 80mm thick coloured rubburised, glossy finish colour machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-40 Grade incl all as specified and directed by Engineer-in Charge.
M&L for providing PCC M-15 grade (nominal mix) using 12.5 mm graded stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing
S & F 100 mm bore cast iron (spun pipe) soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors
S&F 100mm bore cast iron (sand cast pipes) soil, waste and vent pipes, in any length with or without ears, with cement joints,fixed to walls
S&F 100mm CI bends (any radius) diminishes pieces or tapers.
S&F 75mm cast iron cowels.
Excavation over area n exc 1.5 m deep and getting out in hard and dense soil complete all as specified.
M&L for filling under floor available earth/moorum in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering all as specified and directed
S&F Pre Polished Chequered cement concrete tiles glossy and rubburised finish colour 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors over & including 15mm thick screed bed in CM 1:4 under tiles including all as specified and directed by Engineer-in Charge.
M&L RCC pipes class NP-2 with socketed ends laid and jointed complete with rubber ring joints of 150mm dia. (Note : Laying of sewage line in running sewage water & temporary diversion /plugged of existing sewage line & bailing of sewage water is the responsibility of contractor and the rate for the same is deemed to be included in the contract)
M&L for PCC M-7.5 grade (nominal mix) using 40mm graded agg as in bed to drain pipes including forming cradles for 150mm pipe.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out in soft / loose soil complete all as specified and directed
M&L Hume pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC M-7.5 grade below foundation, vent shaft, connection etc, complete for 10 users, conventional type. Complete all as shown on drawing No TD No CEPZ/91/TD/47M Sheet 1/1
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc all as directed
M & L for Brushing neat cement slurry with 3.0kg of cement per sq. metre all as directed.
M&L for Rolled mild Steel Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) (Fe 410 W (Grade E 250) quality A) complete all as specified and directed.
S & F hot rolled medium and high tensile structural steel of grade E 250 quality C conforming to IS 2062: 2011 as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and as directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit(credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
M & L for point wiring with 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheated FRLS cable 1100 Volts drawn in and including PVC concealed conduit Medium grade ISI marked of suitable size including its accessories such as tee, bend ,elbow, socket and chisselling on wall complete also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire including "concealed" MS terminal box ISI marked with modular cover plate of suitable size as per site requirement for housing switch, socket, regulators etc complete.
One light point controlled by one switch
One Fan point controlled by one switch
One 5 pin 6 Amps socket outlet on independent board.
One 5 pin 6 Amps socket outlet on same board.
Bell /buzzer point controlled by one push button on the same board with other switches or indipendent with cables 1.5 sqmm size.
All as per item No 168 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor FRLS 1100 v grade but sheheted single core multi stranded pvc insulated unsheathed copper conductor cable 1100 volts grade for 16 Amps power point on independent board and 2.5 sqmm cable as earthwire.
S & F modular switch type 250 volts single pole one way 1 module 16 Amps all as specified and directed
S & F modular socket outlet 5 pin 6 Amps shuttered flush type all as specified and directed.
S & F Modular switch single pole one way switch 16 Amps all as specified and directed.
S & F Modular socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type all as specified and directed.
S & F single pole and neutral enclosure with a two pin and earth plug and socket of 20 Amps complete with one single pole MCB of 20 Amps SP
S & F PVC ceiling rose / Angle Holder / Batten Holder surface type three terminals type all as specified and directed.
S & F modular fan regulators electronic step type suitable for 1200/1400 mm sweep ceiling fans 120w - 2 module
S & F Bell push flush type 5 Amps 230 V
S & F Bell AC 230 V multi music as directed by Engineer in charge
Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Bajaj / Philips / Crompton Greaves
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
Supply and fixing LED street light fitting 36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.
S & F Table lamp complete with LED bulb of 9 watt all as directed by Engineer-in-Charge
S & F distribution board factory made TPN 4 way in, 415 Volt, Double door metal type suitable for provisioning and fixing MCBs as out going and including TPN MCB 63 Amps as main incoming sunken to wall all as specified & directed. Make; Legrand / L&T / ABB. Note; Cost of MCBs will be measured and paid seperately.
S & F distribution board factory made SPN 8 way in 240 Volt, double door metal type suitable for fixing MCBs as out going and including SPN MCB 32 Amps as main incoming all as specified & Directed. Note: cost of MCBs will be measured and paid seperately, including taking down the existing u/s DB, making suitable cutting in walls & matching with adjacent surfaces complete all as directed by Engineer in Charge.
S & F MCB TPN 63 Amps 'B' series 25 KA with two position DIN Rail clamp.
S & F MCB DP 32 Amps 'B' series
S & F MCB SP 5 to 30 Amps 'B' series 10 KA with two position DIN Rail clamp.
S&F PVC blank plate suitable for MCB DB
M & L for sub main wiring but using two single core muiltistranded PVC insulated copper conductor FRLS cable of size 4.0 sqmm 1100 volt grade drawn suitable size of PVC casing caping and accessories including 4 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious & making good disturbed surfaces of wall/floor/ceiling to match with existing surface, including taking down the existing u/s submain wiring complete all as specified and directed by Engineer in Charge. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm earth cable and one run of PVC casing caping shall be measured as one unit length.
Material and labour for earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete. Note : Rate for achieving required depth by compressor machine / breaker if required is deemed to be included in item unit rate)
M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm grith all as specified and as directed.
M & L for rendendring 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:4 complete all as directed
S & F switch piano type 250 volts single pole one way 6 Amps all as specified and directed
S & F socket outlet 5 pin 6 Amps shuttered flush type all as specified and directed.
S & F switch piano type 250 volts single pole one way 16 Amps all as specified and directed.
S & F socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type all as specified and directed.
Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed
Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed Make: Bajaj / Philips / Crompton Greaves
S & F MCB DP 40 Amps 'B' series 10 KA with two position DIN Rail clamp.
S & F for Sheet metal enclouser with DP and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB complete all as specified and directed
M/S JAYCONSTRUCTION CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .