Addition Alteration cum Special Repairs to Block No P 136 to P 145 at SRC Line Meerut

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.all as specified and directed.

M&L for old size brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified.

M&L brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 but except bricks complete all as specified

Demolition of cement concrete of ground floor n exc 15 cm thickness (below or above ground level) all as specifed

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) 25 mm thick for Sub base of flooring complete all as specified.

M&L Non-skid ceramic tiles coloured of 7 to 8 mm(Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Non-skid ceramic tiles coloured of 7 to 8 mm (squre/ rectungular ) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 15mm screed bed in CM 1:6 complete all as specified and directed.

All as per item No 8.00 above but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Glazed Coloured ceramic tiles in vertical surfaces 450x350x7mm /350x250x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM 1:4 joint free with grout of matching shade complete, all as specified

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid and pointed in any mortor etc.

M&L for 18-20mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for 18-20mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L for machine cut prepolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over 15mm thick screed bed in CM 1:6 all as specified

All as per item No 14 above but factory made bull nosed as in riser of steps, skirting/dado laid over 10mm thick rendering in CM 1:4 complete all as specified.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified.

Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqn each complete all as specified.

S&F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable, but no extra payment on this account shall be madecomplete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F for built in steel cup board with pressed steel frame of size 75 mmx 45 mmx 1.25 mm thick with pressed steel shutter 1 mm thick Godraj pattern fixed to masonary wall by hold fast out of 25x3mm flat iron including MS hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of MS peg set of 3 pegs, locking arrangement including spary painting with two coats of synthetic enamel paint over a coat of red oxide primer to all around on steel surface of frame and shutter and making good distrubed portion in CM 1:3 or PCC 1:2:4, type B0 using 12.5 mm graded stone aggregate complete all as specfied and directed.

S&F for Factory made solid wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing wire gauzed i.e. panel will be of wire gauze in lieu of single side prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly supplied and fitted to chowkats complete all as specified.

S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed.

S&F powder coated aluminium ventilators fixed type with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with clips, frame, necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings including powder coated anodised aluminium frame, grill with one or more rebates including S&F 4.00 mm thick frosted glass complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws

S&F for 18/19 mm thick WPC board (including frame), prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with SS screws to WPC frame work in cup boards and kitchen cabinet rebated or flat edged fancy handle, each leaf 02 Nos Magnite lock complete all as specified and directed.

S&F Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified & directed

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F for 30 mm flaps Continuous (piano) hinges, mild steel, bright finish or electro-galvanised

S&F 125mm size aluminium alloy handles cast type anodized complete all as specified and directed.

S&F 150mm size aluminium alloy handles cast type anodized complete all as specified and directed.

S&F aluminium anodised tower bolts 150mm long, of extruded section.

S&F stainless steel sliding bolt 300 long bolt type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified and directed

S&F stainless steel heavy weight butt hinges 100mm in size complete all as specified and directed.

S&F aluminium anodised barrel tower bolt with bright bolt 200 mm long complete all as specified and directed

S&F 1.00 mm thick mild steel, plain, black sheet in hearths; covering to Manhole cover covering to door chowkats (frames); chullah hoods; water tanks; water troughs: ducts; urinal trought and funnels etc cut to size edges beads, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40mm lap joints or welded/ riveted seanes including bending turning up mitred engles, stopped ends, outlets, etc. as required complete all as specified and directed.

M&L for Stone slab 25 mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed edges rounded or chamfered as directed, set, jointed and pointed in mortar exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.

S&F mild steel 300mm size helical door spring including roller and roller plate fixed with screws to wooden chowkhat or welded to steel frame complete all specified and as directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified.

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified and directed.

M&L for Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar 1:3 complete all as specified.

M&L for applying 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fair, using water proofing compound @ 3% by weight of cement or as per manufacturer instructions, complete all as specified and directed : Note:- (i) Water proofing compound shall be measured and paid seperately. (ii) Contractor is required to deposit ready mix bags for 100% CA quantity to the Engr-in-Charge within 15 days of acceptance of contract.

Preparation of old surface on walls after complete removal of existing treatment by mechanical means complete all as specified and directed

M&L for 1 coat of primer using roller complete all as specified and directed.

M&L for Two coat of OBD using roller for painting complete all as specified and directed

M&L for preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete all as specified.

All as ser item No. 47 above but two coat on old ceiling surface.

Demolition of reinforced cement concrete of any description and any poisition not otherwise specifically for provided ( reinforcement cut to facilitate demolition)

M&L for Form work to sides and soffits of beams lintels etc finished rough surface, flat complete all as specified.

M&L for RCC M-25 Grade as in beams, lintels over 1.5 m span etc complete all as specified.

M&L for precast reinforced cement concrete M-25 Grade as in Chullah hood, chajja and manhole cover, kitchen shelves etc set in cement mortar 1:4.including all neccesary formwork & finishing exposed concrete surface complete all as specified and directed

Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and pointing in cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc complete.

S&F mild steel TMT bars No (500D) 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

ditto as per item No 54 but 6 to 8 mm dia bars complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore pipe and removing from site.

All as per Sl Item No.56 here-in-before but 20 mm bore pipe.

Supplying and laying of CPVC 20 mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls / ceiling (concealed) or laying in floors complete all as specified.

Supplying and laying of CPVC 25 mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls / ceiling (concealed) or laying in floors complete all as specified

Dismantling OH water tank of capacity exc 250 ltr but not exceeding 500 ltr and removing from site complete.

S&F for triple layer white color 500 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes complete all as specified.

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete.

S&F in repair bib taps brass chromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule

S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete all as specified.

S&F in repair of vitreous china squatting pan ‘Orrisa pattern’, size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed.

S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts, 32 mm CP waste coupling complete all as specified.

S&F in repair 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level,white with inlet ball valve, float and handle including brackets and 32 mm dia PVC flush pipe etc complete all as specified and directed.

S&F in repair ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete.

S&F in repair ,PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement complete.

S&F in repairs PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm size all as specified and directed

S&F in repair CP brass soap dish complete all as specified

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F for 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified and directed.

S&F for 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified and directed.

S&F PVC bends 75mm bore, any radius complete all as specified and directed.

S&F PVC bends 110 mm bore, any radius complete all as specified and directed.

S&F 110mm dia PVC (SWR) vent cowl all as specified

S&F 110mm PVC (SWR) junction single T equal or unequal all as specified

S&F 110mm PVC (SWR) 'S' trap complete all as specified

S&F stack clamps out of 50 mm 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe complete all as specified.

S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot & cold water screwed, fixing and connection to pipes complete all as specified and directed. Make:- Cera Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat Part No- F-74 0022

S&F 15mm dia chromium plated fancy type sink mixer with swinging spout (wall mounted model) fixing and connection to pipes complete all as specified and directed. Make:- Cera Cat Part No F 2004501, Pearl Cat Part No ARI-011, Hindware Cat Part No- F 330023

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F in repair chromium plated towel rail 20mm dia 'D' type, 600 mm long approved quality.complete all as specified and directed.

S&F 32 mm bore PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type suitable for wash hand basins/sinks complete all as specified and directed.

S&F in repair 50 mm wide rubber beading for doors of required size complete all as specified and directed.

S&F stainless steel plate rack of size 750mm x 600 mm including shelves, rod to put plates etc made out of 0.80mm thick stainless steel sheet after taking down old one complete all as specified and directed

S&F in repairs 25mm dia Stainless steel decorated curtain rod with bracket and ring complete all as specified and directed.

M&L for injecting chemical emulsion for post constructional anti-termite treatment along the external wall below concrete or masonry/ apron using chemical emulsion @ 2.25 litres per metre including drilling and plugging holes etc.complete all as specified.

M&L for post constructional anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified.

M&L for treatment the soil under plinth protection @ of 5 litres of emultion per square meter of surfaces area complete all as specified.

S&F Hand rails MS , half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 GDE Fe 410-W-(Gde-E-250)quality B

M&L for dubbing out average 20mm thick on irregular faces of walls and ceilings in CM 1:4 complete all as specified

M&L for sunken slab treatment comprising of the following :-(a) Taking out/ down old existing sunken slab treatment and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250mm compete all as specified and directed.(b) for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) over cleaned sunken slab surfaces.(c) applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square metre of surfaces of bitumin 85/25 grade (d) applying bitumin grade 85/25 over priming coat @ 1.20 Kg per Square metre. (e) 25mm thick plastering in CM 1:4 using water proofing compound (WPC) @ 3% by weight of cement. on wall of sunken floor (f) suitable thickness of PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level.(g) Supply & fix of 32mm dia GI pipe medium grade, 450m long (for draining out the water) complete all as directed by Engineer-in-Charge

M&L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finihes with and incl material and labour in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /Bk work in CM 1:4 as required at site and as directed by Engr-in-Charge

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregates) as in roof padding, mass concrete and filling, finished even and fair without using extra cement complete all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:4 mixed with WPC @ 300ml per bag of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate).

Supply only liquid water proofing compound

M&L for surface Preparation: The surface to receive the treatment shall be thoroughly free of laitance, scales, oil or any other loose material. It should be made free of any sharp objects. Cleaning of PCC shall be done with wire brushing to attain smooth levelled surface. Cracks shall be rectified duly filled by using dual shrinkage compensated Repair Mortar and dried for 72 hours before laying the liquid applied membrane. Grout: Providing Chemical injection treatment in the form of pressure grouting to the construction joint and cracked portion at 1m c/c by injecting cement slurry mixed with dual shrinkage compensated cementitious grout Injection grout additive, in the required consistency through the pre fixed PVC nozzles in the 18 mm dia holes, fixing of PVC nozzles with instant setting cement. Angle fillets/Coving: Providing and making of fillet, 50mm x 50mm on sharp corner of terrace with cement sand polymer mortar (add “multipurpose mortar”, 10% by weightofcement). First apply the bonding coat of Multi-Purpose Polymer 5-10% diluted in water and add to cement slurry. Apply the bonding slurry and apply the polymer mortar over the sharp edges. Note: Grouting will be done when and where ever required. Treatment of pipe entry points: Preparing the inside surface of core and PVC /MS Pipe by roughening using suitable Sand paper to get better adhesion prior to

packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Packing the gap using free flowable non shrink cement polymer based grout up to the surface of the bore while the bonding agent is in tacky state. the periphery of PVC pipe should be sealed with Hybrid PU Sealant or dual shrinkage compensated Micro concrete

Note: Will be done when and where ever required Application of Asian Paints two component Epoxy Primer (Resin & Hardener) on the cleaned surface for bonding of Polyurethane with the existing concrete surface. 33 % water dilution is recommended with the pure mixed primer. The primer mixing ratio will be 1:3 (Resin:Hardner) Supplying, providing and applying waterproofing treatment to Podium area with single component highly elastomeric seamless cold applied modified PU coating complete as per manufacturer’s specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1mm. The coating shall have a dual combination of 280% elongation. Material coverage 1.2kg /sq.mt. Note: Contractor is required to deposit 100% CA quantity to the Engr-in-Charge, within 15 days of acceptance of contract.

M&L repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account)

M&L for PCC 1:3:6 type C1 using 20mm graded crushed stone aggragate as in bed blocks, coping plinth protection etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified amd directed.

M&L for repairing existing RCC structure work by guniting to damaged edge bottom of beam , chajja, slab 40 to 60mm thick and part of RCC member in CM 1:3 & depositing material/ mortar with spray gun under a pressure of 20 to 30 N/CM2 including skefolding and welding wire mesh 2 mm dia and size of wiremesh 50mm X 50 mm including cutting welding and placeing in position as directed by Engr in-charge.

Demolition and breaking up drain pipes of dia 100 mm (Salt glazed stone ware, AC or Reinforced cement concrete) set in cement mortar complete all as specified and directed.

Surface excavation n. exc 30 cm deep and averaging 15 deep and getting out in soft /loose soil complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

Removing excavated material (soil) n exc 50 m to a distance and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for Machine pressed precast cement concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified.

M&L sand for cushioning in floor including spreading and levelling in layers n exc 25 mm thick each complete all as specified and directed.

M&L for 15mm thick rendering on Brick masonary wall surfaces in CM 1:4 mixed with water proofing compound finised even and smooth with using extra cement all as directed by Engr-in-charge

Supply only integral water proofing compound.

M&L 200 mm dia salt glazed stone ware drain pipes laid in trenches and jointed as specified internal diiameter of pipe 200 mm including demolition, removal from site upto 3.0 Km as directed by engg in charge and breaking up drain pipe (salt glazed stone ware) complete all as specified and directed.

M&L 150 mm dia salt glazed stone ware drain pipes laid in trenches and jointed as specified internal diiameter of pipe 150 mm including demolition, removal from site upto 3.0 Km as directed by engg in charge and breaking up drain pipe (salt glazed stone ware) complete all as specified and directed.

M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M & L concrete bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 150 mm dia pipe work in foul position.

M&L concrete bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 for 200 mm dia pipe work in foul position.

Demolition of PCC of any description and in any position not otherwise specifically provided for drain etc including removing the same where directed complete all as directed by Engineer-in-Charge.

Demolition of reinforced cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level) (reinforcement cut to facilitate for demolition)

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including finishing the top of benching even and smooth using extra cement complete. Note : Additional / less girth of forming channel beyond 30 cm shall be measured and paid for separately by applying @ Rs 10.05/RM for each 25 mm girth.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm dia pipe

M&L preparing new plastered surfaces of wall and applying three coats of white wash on wall surface complete all as specified and directed.

M&L for applying 2 mm thick wall care putty making smooth surface of wall / ceiling complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces using roller for painting .

Taking down carefully any type of battens or conduits points wiring with conduits (lights, fan, socket or power) complete including fitings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs/ isolators, fan regulators, tube light fittings etc removing material from site and making good distributed surfaces fo walls, ceiling etc including two coats of white/ colour washing /distempering etc to match the existing surfaces complete all as directed by Engineer- in- charge.

M & L for point wiring with 1.5 sq.m nominal cross sectional area, single core 1100 volts grade, standed, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduits of any size/dia complete with all accessories/ fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with and including continous earth wire of size 1.5 sqm nominal cross sectional area single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and duly complete all as specified and directed for the following :-

(a) One tube light/ bulb/ bldg security light point controlled by one, one way swithch 05 / 06 Amps

(b) One fan point / exhausted fan points controlled by one, one way switch 05 /06 Amps.

(c) One 3 pin, 05 / 06 Amps sockete outlet point on independent board controlled by one, one way 05/06 Amps switch.

(d) One 3 Pin, 05 / 06 Amps outlet point on same board controlled by one, one way 05 / 06 Amps switch.

(e) One bell point controlled by one, one wayt switch 05 /06 Amps.

(f) One two way point controlled by two, two way switches 05 / 06 Amps.

(g) All as per serial item no. 02 (c) here - in - before but with 2.5 sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Supply and fix switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed by Engineer - in - charge.

Supply and fixing switch piano flush type, 05 / 06 Amps single pole, two way 240 volts complete all as specified & directed

Supply and fix in socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified.

Supply and fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15/ 16 Amps ( 2 in 1 multipurpose) 240 volts complete all as specified & directed.

Supply and fix in switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engineer - in - charge.

Supply and fixing bell push flush type, 5 Amps, 240 volts

Supply and fixing bell, AC, 240 volts

Supply and fixing lamp holder (Angular / straight) , insulated body, with back plate all as specified and directed.

Supply and fixing LED lamp 9/10 watt.

Supply and fixing decorative wall mounted LED tube light fitting 20 watt with polycarbonate housing with all accessories and fixing material complete all as spercified and directed.

Supply and fix decorative wall light fixture made up of each polycarbonate including 10 watt LED lamp

Supply and fixing decorative LED tube light fitting 10 watt wall mounted with extruded polycarboante integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing materail complete all as specified and directed.

Supply and fixing 35 W LED building security light energy saving & environmental friendly long life luminaire with high power LEDs as light sources and electronic driver including all material required for fitting all as specified and directed all as Engineer - in - charge.

Supply and fixing of ceiling rose, 3 phase / PVC/ polycarbonate isolated body complete all as specified & directed by Engineer - in - charge

M & L for sub main wiring with 06 sqmm nominal cross sectional area, two single core, 1100 volts grade, standard, PVC insulated, unsheathed, copper conductor cable with and including continous earth wire fo size 06 sqm nominal cross sectional area, single core, PVC isolaled, copper conduits accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the distrubed surfaces to match the existing including taking down old u/s submain wiring complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral , AC , 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/ distempering etc to match the existing distrubed surface including taking down old u/s DB's complete all as directed by engineer - in - charge.

Supply and fixing MCB, SP, AC, 240 volts "C" series capacity of 06 to 32 Amps, 10KA and making connecitons complete all as specified and directed.

Supply and fixing isolator, DP ( Double Pole) AC, 240 volts, B series capacity 32 Amps and making connections complete all as specified and directed

Supply and fix MCCB 4 Pole, 63 Amps 25 KA complete all as specified and directed.

Supply and fixing vertical loadline sheet metal enclosure double door, triple pole and neutral ( TP & N vertical loadline) AC, 415 volts, 04 way with 200 Amps rated copper bus bar and IP - 43 & lk 09 protection with provision of 16 KV 63 Amps G frame MCCB Make - Legrands /Schneider / ABB with the inbuilt provision for fixing of 1 No MCCB and 12 Nos MCB's inside of DB with metal door and flush to wall including grounting and cutting in existing wall and making good disturbed surfaces with two coats of white / colour washing / distempering etc to match the existing one complete one complete all as directed by Engineer - in - charge.

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directed in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edges of the plate not less than 1.5 mtr below normal ground level steel earth plate connected with GI wire 04 mm dia by means lug, bolts, nuts, check nuts washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate no.3 of SSR part l connecting to main switch board / main DB's including excavation, earth work,salt and charcoal dust mixed adn packed 150mm thick around GI earth plate , GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS bars 6 mm dia at the rate 150mm center to center both way with suitable lifitng handle and pit / chamber in PCC 1:3:6 type C1, angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and fixing Exhaust fan with louver and fixing accessories 230 Volts and 300mm sweep.

Supply and fixing Exhaust fan with louver and fixing accessories 230 Volts and 250 mm sweep.

M&L for making opening in the wall for fixing exhaust fan up to 250mm / 300mm including plastering work & making good the surfaces complete all as directed.

Supply and fixing ceiling fan with fan regulator 1200 mm sweep BEE, BLDC Fan, AC, 230V.

Supply and fix electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 ltr complete all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as directed.

Taking down existing ceiling fan of any size, ceiling cable end, dismentaling blades make one set of three bladed and keep them safe to deposited to E/M yard complete all as specified.

Supplying, laying, commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 sqmm 3.5 core armoured PVC sheathed with aluminium conductor heavy duty laid in trench, fixing on wall, under road crossing through protection pipe etc including taking down LT UG cable complete all as specified and directed.

Excavating in treches n exc 1.5 m wide and exc 1.5 m in depth for foundation etc or for laying of cable or pipe etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/ losse soil and levelling of bottom surface to required level complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ losse soil complete all as specified and directed.

Supply and spreading clean & fine dry river sand in trenches for cushioning of under ground cable / cable duct complete all as specified and directed. Note : Only punned thickness shall be measured for the payment purpose.

M&L for fly ash brick protection with sub class 'B' bricks, laid dry and to the length of brick across the length of cable complete all as specified and directed.

M&L for GI pipe light grade 40 mm dia in trenches, road croosing, passing through pipe or laid in wall / pole etc including taking down complete all as specified and directed.

Note : Tenderers may note that the amount of credit of Rs. 371174.00 will be deducted from the total amount arrived, at the time of Acceptance of tender.

Shikhar ji Enterprises

Quality Builders

m/s gupta construction

SA construction co.

Shree Construction Co.

M/S Chhavi Constructions Co

A R construction

malik constructions