Maintenance and repairs to Inspection quarters at ITPC campus Chinchwad Pune

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. a) a) All kinds of soil.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50 m and lift up to 1.5m, as directed by Engineer-in-Charge. a) Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: a) Cement mortar 1:4 (1 cement : 4 coarse sand)

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand)

Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres a) Up to 150 mm diameter

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: a) Up to 150 mm diameter

Providing and fixing handwheel operated C.I. sluice valves conforming to IS :14846 ( Class -2 pressurerating PN1-6) )complete with bolts, nuts, rubber gaskets etc.Flanged end type valve non rising a) 80 mm diameter

Providing and fixing C.I.flanges for sluice valves with bolts, nuts, rubber insertions etc. a) 80 mm diameter

Providing and laying HDPE pipe with all fixtures to existing CI pipeline etc complete : a) 80 mm diameter

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. a) Two coats.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour: a) Old work (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a) Two or more coats on old work.

Credit for C.I. pipes

Anoj Enterprises (BID ID -777941)