Repair / renovation of Truss/

Amount

P/fixing of wardrobe type almirah/File racks using 19mm plyboards excluding shutters with dunmica on inner sides and 10mm plyboard on back side including all necessary fittings steel hings,handles,catchers, locks (1'-6" Deep) complete job.

P/Fixing of wooden panelling ( imported wood) including 12mm thick waterproof plywood as base work incld frame work @ 18"x18" ,moulding, wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of panneling etc over prepared surface after applying sandpapering , applying sealer and finishing with French spirit polish complete job

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing Colour coated 0.5mm high rib sheets (size, shape and pitch of corrugation as approved by Engineerin-Charge) 0.50mm+/- 5% total coated thickness (TCT), with EPDM seal or with polymer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead complete upto any pitch in horizontal /vertical or curved surfaces

Providing and fixing of 0.5 mm thick plain profile sheet roofing accessories in ridge valley to (500 to 600 mm) of approved profile of color as approved by engineer with self duty, self tapping screws size(5.5mm x 55 mm) with epoxy seal of same color matching of shade ridge/ valley including carriage

Providing hoisting and fixing trusses/purlins/ rafters/posts/post like components including cost of screws te. Complete in ist class imported commercial wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Kiln seasoned and chemically treated hollock wood (Note: -Butt hinges and necessary screws shall be paid separately). windows 30-35 mm thick imported wood.

Providing & fixing 4.0 mm thick glass panes (weighing not less than 10 kg/sqm) with all fixtures, all complete

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows . Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Kiln seasoned & chemically treated hollock wood 30-35 mm thick Decorative ply wood both side decorative veneer (type 1) conforming to IS 1328 BWR type imported wood.

P/F aluminium sliding door bolts ISI marked anodised (anoidic coating not less than AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws complete job 300x16 mm.

P/F of aluminium handles ISI marked as per IS 1868 transparent or dyed to reqd. colour with necessary screws etc complete job

P/F of aluminium tower bolts ISI marked as per IS 1868 transparent or dyed to reqd. colour with necessary screws etc complete job

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work . On wood work

Add provision for Electrification

ARSHAD HUSSAIN BHAT (BID ID -2356560)

MOHAMMAD YASEEN SHAH (BID ID -2357082)

FAIROZ AHMAD LONE (BID ID -2357047)

M/s Engineering Consulting & Constructions (BID ID -2357514)

Bilal Ahmad (BID ID -2357039)

GH AHMAD TANTRAY (BID ID -2356583)

M/S TANVEER AHMAD JOGI (BID ID -2357223)

mohd ayoub ganie (BID ID -2356757)

SAYAR AHMAD BHAT (BID ID -2356941)

Umar Ali Misger (BID ID -2357516)

ISOK INFRATECH (BID ID -2356864)

MUDASIR AHMAD DAR (BID ID -2357123)